Point out mistakes in my Concept(Container Contentpane)

Container is a class that is used to attach other components such as
ContentPane and again ContentPane is used to attach components such as
JPanel such that drawing is possible
My point is that am i wright with concept that both classes are used
to attach components
such that
Container(attach contentpane) -ContentPane(it attach jpanel)-JPanel
if this is the concept then good else tell me what is true concept i have also read
tutorial but still confusion
thanks in advance

Read up about JLayeredPane in the tutorial and you'll see that the content pane is one layer (the default layer for components) in heavy-weight containers like Frame and JFrame. JPanels do not have content panes. You add components directly to the JPanel, as opposed to getContentPane().add(component) like you do in frames.

Similar Messages

How do I find out which (if any) albums contain a specific photo?

In iPhoto and Aperture, if I search for a photo, it shows me which album the photo is in. In Photos for Mac, it only gives me the option to "Show Moment". Is there any way to see whether a specific photo is contained in any albums? Thanks!

YYou can right-click on a photo and select Show in Moment, but there is no way that I'm aware of to show in album.
You can request features, point out bugs, etc, at Apple Feedback pages.
Or directly for Photos.

Video signaling problem caused by 1.9, 2.0 BIOS (pointing out a BIOS problem)

Hi, i have a problem with the video signal. At random times when i boot up my computer, the computer would power up but there is no signal to the monitor. there is no hdd activity (via the hdd led) and nothing seems to be happening just that the fans are whirring. i have to unplug the computer then plug it again then turn it up again which sometimes repeats the problem. This is very irritating! So i did a little bit of troubleshooting:
1. I changed video cards. I used a SAPPHIRE ati radeon 9600XT fireblade and a LEADTEK GF4 ti4200. Both cards were causing the same problem and when i used both cards to another computer, there is no problem. = NOT A video card problem
2. used differnt kinds of drivers Cat 3.10, 4.10, 4.20 (omega and official) does not seem to do anything (which also i believe the drivers are OS dependent and its the bios of the vid card that starts up the vid card)
3. upgraded from 1.9 to 2.0 BIOS. still the same problem
4. reverted from 2.0 to 1.7 BIOS. the problem ended.
BTW, the board is 865PE-Neo2 - S. on a Intel 2.6Ghz C, 512MB TwinMos ram with m-tec chips, 80gb hdd, enermax 300w psu
so ive' solved the problem, and i just wanted to point out that there is a problem with 1.9, 2.0 BIOS. (havnt tried the 1.8 tho)

Wish I had seen this thread 2 weeks ago, but you did save me from buying a new graphics card. That was the last step (before chucking this mobo completely) in my attempts to fix the same problem. It didn't bother me too much, except I also couldn't get any DVD player (tried 3) to work. Would boot sometimes and at others gave a blue screen video error.
Flashing to bios 1.7 was the only thing that fixed it. Tried different memory, updating software, various combinations of drives, etc. For the record I tried bios 1.8, 1.9, 2.0, and 2.1. Not sure what about those updates causes problems but there definitely is something wrong.
Thanks.

When the apple review team review our app,they point out that our app uses a background mode but does not include functionality that requires that mode to run persistently.but in fact,when the app in background ,the app need data update to make the

when the apple review team review our app，they point out that our app uses a background mode but does not include functionality that requires that mode to run persistently。but in fact，when the app in background ，the app need data update to make the function of trajectory replay come ture。in fact， we have added function when the app is in background mode。we have point out the point to them by email。but they still have question on the background mode，we are confused，does anyone can help me，i still don't know why do review team can't find the data update when the app is in background and how do i modify the app，or what is the really problem they refered，do i misunderstand them？
the blow is the content of the review team email：
We found that your app uses a background mode but does not include functionality that requires that mode to run persistently. This behavior is not in compliance with the App Store Review Guidelines.
We noticed your app declares support for location in the UIBackgroundModes key in your Info.plist but does not include features that require persistent location.
It would be appropriate to add features that require persistent use of real-time location updates while the app is in the background or remove the "location" setting from the UIBackgroundModes key. If your application does not require persistent, real-time location updates, we recommend using the significant-change location service or the region monitoring location service.
For more information on these options, please see the "Starting the Significant-Change Location Service" and "Monitoring Shape-Based Regions" sections in the Location Awareness Programming Guide.
If you choose to add features that use the Location Background Mode, please include the following battery use disclaimer in your Application Description:
"Continued use of GPS running in the background can dramatically decrease battery life."
Additionally, at your earliest opportunity, please review the following question/s and provide as detailed information as you can in response. The more information you can provide upfront, the sooner we can complete your review.
We are unable to access the app in use in "http://www.wayding.com/waydingweb/article/12/139". Please provide us a valid demo video to show your app in use.
For discrete code-level questions, you may wish to consult with Apple Developer Technical Support. When the DTS engineer follows up with you, please be ready to provide:
- complete details of your rejection issue(s)
- screenshots
- steps to reproduce the issue(s)
- symbolicated crash logs - if your issue results in a crash log
If you have difficulty reproducing a reported issue, please try testing the workflow as described in <https://developer.apple.com/library/ios/qa/qa1764/>Technical Q&A QA1764: How to reproduce a crash or bug that only App Review or users are seeing.

Unfortunately, these forums here are all user to user; you might try the developer forums or get in touch with the team that you are working with.

Hi, I have a freecom 1TB hard drive which was working fine until it froze. I pulled it out (mistake I now know) and now it doesn't mount. It shows up in Disk Utility but won't manually mount. When I try to repair it gives message 'failed on exit'. hel

Hi, I have a freecom 1TB hard drive which was working fine until it froze. I pulled it out (mistake I now know) and now it doesn't mount. It shows up in Disk Utility but won't manually mount. When I try to repair it gives message 'failed on exit'. Some people have said to try Disk Warrior, but at $100 it's quite expensive maybe fix. help!

You likely need to reformat the drive which will destroy all data and you need a backup to restore it. If no backup is present then a data retrieval service can be more expensive than DiskWarrior. There is software that can rescue the data but I can not vouch for it's effectiveness as I have always maintained backups. .
http://www.prosofteng.com/
http://www.wondershare.net/ad/data-recovery-mac.html?gclid=CLTp3Mj07rkCFevm7AodL lUAHw
http://diskdoctors.com/software/mac-data-recovery/utility.asp?gclid=CMyf_MH17rkC Fcvm7AodSE0A8A
http://www.cleverfiles.com/

In iPhoto, is there a way I can paint or add and arrow to any picture to point out a certain detail ???? thank you for your assistance, Fredout

in iPHOTO is there a way where I can paint a black arrow or add a pre-set arrow ( from font menu ) onto one of my photos to point out a certain detail / location.
Please be kind and advise, manfred frrom Jupiter

Export the Photo to your Desktop and open it with Preview, then in Preview go to Tools and select Annotate to Add Arrows, Ovals, Rectangles or Text.

I upgraded to Mavericks and it points out mispelled words but never offers corrected suggestions

I upgraded to Mavericks and it points out mispelled words but never offers corrected suggestions. I deleted SpellChecker because it's not compatible with this program. I don't want Mavericks to change the spelling, I just want it to point it out, let me right click and choose my corrected suggestion.
Why would this feature be removed? Do I need to enable it?

Mavericks doesn't do that, only individual apps do, so provide the missing details.

How to point out high CPU Utilization in sql server 2008

Hi,
I am using sql server 2008 , where in i have 10 instances in the physical box of all sql server 2008 versions.
I can see , the CPU (12 CPUS) that is allocated to the physical box is consuming around 90% of utilization, I need your help to point out the exact sql instance that is using more CPU, Please give me the mathods , since i understand that there is no fixed
rule to derive the solution.
Thank you
hemadri

This first thing to check if CPU is at 100% is to look for parallel queries:
-- Tasks running in parallel (filtering out MARS requests below):
select * from sys.dm_os_tasks as t
where t.session_id in (
   select t1.session_id
    from sys.dm_os_tasks as t1
   group by t1.session_id
having count(*) > 1
and min(t1.request_id) = max(t1.request_id));
-- Requests running in parallel:
select *
   from sys.dm_exec_requests as r
   join (
           select t1.session_id, min(t1.request_id)
          from sys.dm_os_tasks as t1
         group by t1.session_id
        having count(*) > 1
           and min(t1.request_id) = max(t1.request_id)
      ) as t(session_id, request_id)
     on r.session_id = t.session_id
    and r.request_id = t.request_id;
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Not enough data points out of hokuyo lidar on robotics simulator

Hi,
We've been using the hokuyo URG series lidar in the robotics simulator but we can't get more than 29 data points out of it. We get hundreds when running the sensor in real life. Is there a way to increase the number of data points read in the simulator? It is too low to be useful at the moment.
thanks.
(Using Labview Robotics 2012)

I believe the default scan angle for the simulated Hokuyo lidar sensor is 5 degrees. With max and min angles of +-70 degrees, this explains why you're seeing 29 data points. You can change these settings in the Simulator wizard. Right-click the simulation target in the project, and select Properties. In the wizard, select the Hokuyo sensor in the tree, and scroll down to change the "Max Angle", "Min Angle", and/or "Scan Angle" parameters.

On mozilla's OWN WEBSITE I get the message 'Your Firefox is out of date and may contain a security risk!" but I just download and installed the latest version?

I have the latest version of firefox to date (10/15/2014 v32) and I still get messages while on various websites (Youtube, Google, Gmail) telling me that Your Firefox is out of date and may contain a security risk.
I even get that message on the support pages of mozilla.org??
I've tried the about:config reset the useragent(s) fix but that doesn't work.
I've tried browsing in safe mode and still get the error.
Why is this False/Positive happening?
Thanks

hello your useragent (the information the browser sends to websites to identify its version) - apparently mistakenly - shows this:
Mozilla/5.0 (Windows NT 6.1; WOW64; rv:2.0.1) Gecko/20140923 '''Firefox/4.0.0; xs-A30GTmfXR3o;CkHZPf;'''
probably some sort of unwanted software has overwritten it. please refer to this article in order to reset the user-agent settings in firefox:
[[Websites say that Firefox is outdated or incompatible even though it's the latest version]]
in case this does not help, please try to reset the whole browser:
[[Reset Firefox – easily fix most problems]]

Compositing in No Doubt's Simple Kind of Life Music Video. Please refrain from giving vague answers or pointing out flaws

How would this sequence have been done? Would it have been green screen for some of the shots?Video link - http://m.youtube.com/watch?v=kRpZJ9EgJho How would you achieve from 1:37 to 1:55. Many thanks to any thoughtful answers. I dont want vague answers or pointing out flaws like the last time i asked about a video effect
thanks a lot ☺

I'm sorry that you had a bad experience on the forums before. It's not fun to be reamed when you're just looking for help.
It seems like either greens screen or just masking and repeating the layers would work. Of course, this kind of stuff doesn't come easy, so plan your shots carefully and use straight edges in your shots to set up easy masking options. It's possible that you could freeze something like one of the cakes at a point in the video where it is largest in the screen, cut it out in Photoshop, and then place it in a grid pattern back in AE.
It also might help to know exactly what you are trying to accomplish.
Trent

HT4623 I have downloaded the ios 6, three times but it just doesn't install. Right now, it's been 3 hours and my iphone is stuck on around 20% of updating ios. If I restore to ios 5, it happens very quickly but on ios 6 it's not. Kindly point out what am

I have downloaded the ios 6, three times but it just doesn't install. Right now, it's been 3 hours and my iphone is stuck on around 20% of updating ios. If I restore to ios 5, it happens very quickly but on ios 6 it's not. Kindly point out what am I doing

Hi Eric Ferguson,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Best of luck,
Mario

Program switches insertion point out of field!

I'm entering IPTC metadata (City, State, Country), and the insertion point is definitely being switched out of the different fields by the program. It's especially evident when I'm typing in a field, and hit tab to go to the next field; if I pause (and thus do not type), the program will take the insertion point out of the field. But it is also true that I'll click in a field, and then, (if I don't type) suddenly, the field will go "black," and the field is no longer selected.
Note: I have this problem ONLY if I have multiple images selected.

I see this as well, and agree that it is a tremendous pain. It appears that Lightroom is stealing the focus away from the text field when Lightroom needs to process the data you are entering. I can't tell you how many times I have had Lightroom go bonkers because the focus was stolen and it interpreted my keystrokes as shortcuts!

HT5622 Hi, I have verified my apple ID and it showed verified. However, it is still point out follow the verify link to your email. Please help

Hi, I have verified my apple ID and it showed verified. However, it is still point out follow the verify link to your email. Please help

I have this problem too

[svn] 668: opensource: ant package now works on a Mac; Darrell pointed out some Windows-centric backslashes that were holding up the show (fixed others that I found too).

Revision: 668
Author: [email protected]
Date: 2008-02-26 16:26:38 -0800 (Tue, 26 Feb 2008)
Log Message:
opensource: ant package now works on a Mac; Darrell pointed out some Windows-centric backslashes that were holding up the show (fixed others that I found too).
Modified Paths:
flex/sdk/branches/3.0.x/build.xml
flex/sdk/branches/3.0.x/frameworks/tests/checkinapp/build.xml
flex/sdk/branches/3.0.x/modules/asc/build/java/build.xml

It sounds to me like Final Cut Express is what you really need to learn. I learned it by buying a book that included a DVD of examples to use as you go through the book. It will only take a couple of hours to figure out how to do most of what you need to know. Its the last 20% that will take the longest to learn, mostly because its the stuff you'll use the least.
The book I used was written by Tom Wolsky. It was for version 2 of the program. I don't know if its been updated. Take a look in the Final Cut Express forum. Ask the forum for recommendations. You'll probably get a response from Tom Wolsky himself since he's a regular on that forum.
I've since upgraded to Final Cut Studio. I occasionally still use iMovieHD because its easier for some tasks but not very flexible. For example, the themes in iMovie are easy to use but it would be near impossible to recreate them in Final Cut Express. So I sometimes just populate the themes in iMovie and export them to Final Cut to add to a larger project.
There are a couple of potential stumbling blocks in learning Final Cut, one of them being media handles. Once you figure out those, you'll be on your way...

Point out mistakes in my Concept(Container Contentpane)

Similar Messages

Maybe you are looking for