Portal Installation Problem on Sun Solaris

Hi,
I'm trying to Install portal (Oracle 9i AS ) on Sun Solaris 2.8 (64 bit). I have followed all the steps and installer show successfull installation. But when I'm trying to check the installation thru web browser, I'm not getting anything. It is not able to load portal. Please let me know do I need to start any listener or anything else.
What else should I do to check the mistakes because I have installed it twise but no luck.
Thanks.
Sandeep

I am having the same problem installing on Windows 2000. I looked at the services that were installed and two of the ones that were marked as Automatic did not start when I rebooted. They are:
OracleiSuitesHTTPServer
OracleOraHome81TNSListener
I also tried to start the HTTP server from the command line but got the following error:
D:\Oracle\iSuites\Apache\Apache>apache
Syntax error on line 14 of D:\Oracle\iSuites\Apache\Apache\conf\mod__ose.conf:
AuroraService - directive already in effect for this Server
If anyone has a solution please let me know. I had a hard enough time trying to get through the installation at all.
Thanks,
-Stephanie
null

Similar Messages

  • Issue wit hthe installation on Unix Sun solaris

    Hello,
    We are doing a fresh installation on Unix sun solaris Sparc 64 bit
    I have downloaded the software and when i was trying to invoke RunInstaller i am getting the following error message and this is regarding Display
    Error Message :
    Checking Temp space: must be greater than 250 MB. Actual 66655 MB Passed
    Checking swap space: must be greater than 500 MB. Actual 66889 MB Passed
    Checking monitor: must be configured to display at least 256 colors
    >>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
    Some requirement checks failed. You must fulfill these requirements before
    continuing with the installation,at which time they will be rechecked.
    we didnt actually have any licensed version of xterm or any other Display unit.
    As this is a test server i am working i was looking for free software which also supports ssh and work as a Display tool.
    Note: This should support ssh.
    Would appreciate any help.
    Thank You

    See this thread - installing the 11g database via putty
    HTH
    Srini

  • WebLogic 6.0 Installation error in Sun Solaris 2.6

    I tried to install the evaluation copy of WebLogic App Server in a Sun Solaris
    2.6 box and when I run the installer, it stopped because a symbol in a xomEuro.so.2
    file was not found.
    The installer stopped and showed an error similar to:
    ../usr/openwin/lib/locale/iso8859-1/xomEuro.so.2: _XlcCompileResourceList: referenced
    symbol not found
    I will very glad to know what was the problem and of course, how to solve it.
    Thank you very much
    Michel Fornaris
    Senior Web Developer
    Baptist Health Systems of South Florida

    Evance Mok wrote:
    Added "DebugConfigInfo OFF" to the "IfModule" tag in httpd.conf and still no
    luck. Stopped the segmentation faults, but we are unable to forward the jsp
    request to weblogic. Is the "DebugConfigInfo" parameter in the right
    location? Are there any other suggestions?
    Also, from the documentation, the "AddModule" command for weblogic is not
    added in some cases, why is this the case?This just means that the apxs script does not add it so you will need to add it
    manually...
    >
    >
    Thanks,
    Evance
    "Vittal Gunturu" <[email protected]> wrote:
    Hi we are proxying all the jsp requests from apche to wl6 on a solaris 2.7.
    Always getting a segmentation fault ..
    [Thu Jan 25 10:45:57 2001] [notice] child pid 9107 exit signal Segmentation
    Faul
    t (11)
    Here's the section of the httpd.conf file
    LoadModule weblogic_module libexec/mod_wl.so
    AddModule mod_weblogic.c
    <IfModule mod_weblogic.c>
    WebLogicHost 192.168.1.33
    WebLogicPort 7001
    MatchExpression *.jsp
    ErrorPage http://www.yahoo.com
    Debug ALL
    </IfModule>
    Any suggestions
    thanks
    vittal
    This is a known problem. It will be fixed in sp1.
    For now, you need to add "DebugConfigInfo OFF" to httpd.conf.
    Jong

  • Numlock Problem with Sun Solaris 10 remote login into Linux

    Hi,
    I am using a Sun Solaris 10 system in a network. The Num lock key works fine when launching application locally on the the Solaris system.
    However, when I login from the Solaris 10 machines remotely into a Linux machine, set the display to my machine(i.e solaris 10) and then launch GUI applications, the Num Lock key does not work as expected.
    Can any of you help me with this issue ?? Is this a documented problem ?
    Is there any workaround for this issue ??
    Thanks in advance
    Regards,
    Philip

    dj_phil, any luck on finding the problem and/or solution here?
    thanks -12

  • Performance Problem For Sun Solaris Kernel

    Hello,
    I have DB version 10.2.0.2 On Sun Solaris 5.10, when a run top utility i see that 20-25 % of CPU takes Kernel.
    Then i Truss DB writer and in out file i see error likes this: kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    On metalink i read that it's bu using direct I/O on Solaris UFS file system. Then I change init parameter filesystemio_options from setall to asynch. now value of this parameter is asynch, but when i truss DB writer i saw same error: kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    has anyone same problem?

    file system is UFS. mount option is forcefirectio.
    This is example:
    14051/169:     pwrite(341, "06A2\0\01505D1 <8797 DBA".., 8192, 0xBA278000) = 8192
    14051/1:     lwp_unpark(171)                         = 0
    14051/171:     lwp_park(0x00000000, 0)                    = 0
    14051/1:     lwp_unpark(172)                         = 0
    14051/172:     lwp_park(0x00000000, 0)                    = 0
    14051/1:     lwp_unpark(173)                         = 0
    14051/170:     pwrite(367, "06A2\0\01BAA .BA8797 C #".., 8192, 0x545D74000) = 8192
    14051/173:     lwp_park(0x00000000, 0)                    = 0
    14051/172:     pwrite(369, "06A2\0\01C 88DE68797 DBA".., 8192, 0x711BCC000) = 8192
    14051/173:     pwrite(370, " $A2\0\01C p07 z8797 D13".., 8192, 25785483264) = 8192
    14051/1:     lwp_unpark(174)                         = 0
    14051/174:     lwp_park(0x00000000, 0)                    = 0
    14051/1:     lwp_unpark(175)                         = 0
    14051/175:     lwp_park(0x00000000, 0)                    = 0
    14051/1:     lwp_unpark(176)                         = 0
    14051/176:     lwp_park(0x00000000, 0)                    = 0
    14051/171:     pwrite(367, "06A2\0\01BABB6 p8797 C #".., 8192, 0x576CE0000) = 8192
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/174:     pwrite(370, "06A2\0\01C } # W8797 =B6".., 106496, 0x7A46AE000) = 106496
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/175:     pwrite(374, "06A2\0\01D E - 28797 C #".., 8192, 0xA5A64000) = 8192
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/176:     pwrite(375, "06A2\0\01D8B 7 Z8796 J96".., 8192, 0x166EB4000) = 8192
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/156:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/153:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/152:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/157:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/154:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/155:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/161:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/160:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/158:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/163:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/162:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/159:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/164:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/165:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/166:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/167:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/168:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/169:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/173:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/170:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/172:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/174:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/175:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/171:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/1:     semtimedop(16777258, 0xFFFFFFFF7FFFDEB4, 1, 0xFFFFFFFF7FFFDEA0) (sleeping...)
    14051/176:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/1:     semtimedop(16777258, 0xFFFFFFFF7FFFDEB4, 1, 0xFFFFFFFF7FFFDEA0) = 0
    14051/1:     yield()                              = 0
    14051/1:     yield()                              = 0
    14051/1:     yield()                              = 0
    14051/1:     yield()                              = 0
    14051/1:     lwp_unpark(177)                         = 0
    14051/177:     lwp_park(0x00000000, 0)                    = 0
    14051/1:     yield()                              = 0
    14051/1:     lwp_unpark(178)                         = 0
    14051/178:     lwp_park(0x00000000, 0)                    = 0
    14051/1:     yield()                              = 0
    14051/1:     lwp_unpark(179)                         = 0
    14051/179:     lwp_park(0x00000000, 0)                    = 0
    14051/1:     yield()                              = 0
    14051/1:     lwp_unpark(180)                         = 0
    14051/180:     lwp_park(0x00000000, 0)                    = 0
    14051/1:     lwp_unpark(181)                         = 0
    14051/181:     lwp_park(0x00000000, 0)                    = 0
    14051/182:     lwp_park(0x00000000, 0)                    = 0
    14051/1:     lwp_unpark(182)                         = 0
    14051/1:     lwp_unpark(183)                         = 0
    14051/183:     lwp_park(0x00000000, 0)                    = 0
    14051/1:     lwp_unpark(184)                         = 0
    14051/184:     lwp_park(0x00000000, 0)                    = 0
    14051/177:     pwrite(258, "06A2\0\0\0 @0602879719EA".., 8192, 12599296) = 8192
    14051/1:     lwp_unpark(185)                         = 0
    14051/185:     lwp_park(0x00000000, 0)                    = 0
    14051/181:     pwrite(259, " &A2\0\0\080\09987977F P".., 8192, 1253376) = 8192
    14051/186:     lwp_park(0x00000000, 0)                    = 0
    14051/182:     pwrite(259, " &A2\0\0\0800189879783\t".., 8192, 3219456) = 8192
    14051/184:     pwrite(259, " &A2\0\0\08002C987978114".., 8192, 5840896) = 8192
    14051/180:     pwrite(259, " &A2\0\0\080\0 )879782F9".., 8192, 335872) = 8192
    14051/1:     lwp_unpark(186)                         = 0
    14051/185:     pwrite(259, " &A2\0\0\08004A98797 x ~".., 8192, 9773056) = 8192
    14051/1:     lwp_unpark(187)                         = 0
    14051/187:     lwp_park(0x00000000, 0)                    = 0
    14051/1:     lwp_unpark(188)                         = 0
    14051/1:     yield()                              = 0
    14051/188:     lwp_park(0x00000000, 0)                    = 0
    14051/186:     pwrite(259, " &A2\0\0\08005 98796 pA4".., 8192, 10952704) = 8192
    14051/1:     lwp_unpark(189)                         = 0
    14051/187:     pwrite(259, " &A2\0\0\08005998797 {FF".., 8192, 11739136) = 8192
    14051/1:     lwp_unpark(190)                         = 0
    14051/188:     pwrite(259, " &A2\0\0\08006 987977F95".., 8192, 13049856) = 8192
    14051/1:     lwp_unpark(191)                         = 0
    14051/169:     pwrite(341, "06A2\0\01505D1 <8797 DBA".., 8192, 0xBA278000) = 8192
    14051/1:     lwp_unpark(171)                         = 0
    14051/171:     lwp_park(0x00000000, 0)                    = 0
    14051/1:     lwp_unpark(172)                         = 0
    14051/172:     lwp_park(0x00000000, 0)                    = 0
    14051/1:     lwp_unpark(173)                         = 0
    14051/170:     pwrite(367, "06A2\0\01BAA .BA8797 C #".., 8192, 0x545D74000) = 8192
    14051/173:     lwp_park(0x00000000, 0)                    = 0
    14051/172:     pwrite(369, "06A2\0\01C 88DE68797 DBA".., 8192, 0x711BCC000) = 8192
    14051/173:     pwrite(370, " $A2\0\01C p07 z8797 D13".., 8192, 25785483264) = 8192
    14051/1:     lwp_unpark(174)                         = 0
    14051/174:     lwp_park(0x00000000, 0)                    = 0
    14051/1:     lwp_unpark(175)                         = 0
    14051/175:     lwp_park(0x00000000, 0)                    = 0
    14051/1:     lwp_unpark(176)                         = 0
    14051/176:     lwp_park(0x00000000, 0)                    = 0
    14051/171:     pwrite(367, "06A2\0\01BABB6 p8797 C #".., 8192, 0x576CE0000) = 8192
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/174:     pwrite(370, "06A2\0\01C } # W8797 =B6".., 106496, 0x7A46AE000) = 106496
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/175:     pwrite(374, "06A2\0\01D E - 28797 C #".., 8192, 0xA5A64000) = 8192
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/176:     pwrite(375, "06A2\0\01D8B 7 Z8796 J96".., 8192, 0x166EB4000) = 8192
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/1:     kaio(AIOWAIT, 0xFFFFFFFFFFFFFFFF)          Err#22 EINVAL
    14051/156:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/153:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/152:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/157:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/154:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/155:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/161:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/160:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/158:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/163:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/162:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/159:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/164:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/165:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/166:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/167:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/168:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/169:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/173:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/170:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/172:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/174:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/175:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/171:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/1:     semtimedop(16777258, 0xFFFFFFFF7FFFDEB4, 1, 0xFFFFFFFF7FFFDEA0) (sleeping...)
    14051/176:     lwp_park(0x00000000, 0)          (sleeping...)
    14051/1:     semtimedop(16777258, 0xFFFFFFFF7FFFDEB4, 1, 0xFFFFFFFF7FFFDEA0) = 0
    14051/1:     yield()                              = 0
    14051/1:     yield()                              = 0
    14051/1:     yield()                              = 0
    14051/1:     yield()                              = 0
    14051/1:     lwp_unpark(177)                         = 0
    14051/177:     lwp_park(0x00000000, 0)                    = 0
    14051/1:     yield()                              = 0
    14051/1:     lwp_unpark(178)                         = 0
    14051/178:     lwp_park(0x00000000, 0)                    = 0
    14051/1:     yield()                              = 0
    14051/1:     lwp_unpark(179)                         = 0
    14051/179:     lwp_park(0x00000000, 0)                    = 0
    14051/1:     yield()                              = 0
    14051/1:     lwp_unpark(180)                         = 0
    14051/180:     lwp_park(0x00000000, 0)                    = 0
    14051/1:     lwp_unpark(181)                         = 0
    14051/181:     lwp_park(0x00000000, 0)                    = 0
    14051/182:     lwp_park(0x00000000, 0)                    = 0
    14051/1:     lwp_unpark(182)                         = 0
    14051/1:     lwp_unpark(183)                         = 0
    14051/183:     lwp_park(0x00000000, 0)                    = 0
    14051/1:     lwp_unpark(184)                         = 0
    14051/184:     lwp_park(0x00000000, 0)                    = 0
    14051/177:     pwrite(258, "06A2\0\0\0 @0602879719EA".., 8192, 12599296) = 8192
    14051/1:     lwp_unpark(185)                         = 0
    14051/185:     lwp_park(0x00000000, 0)                    = 0
    14051/181:     pwrite(259, " &A2\0\0\080\09987977F P".., 8192, 1253376) = 8192
    14051/186:     lwp_park(0x00000000, 0)                    = 0
    14051/182:     pwrite(259, " &A2\0\0\0800189879783\t".., 8192, 3219456) = 8192
    14051/184:     pwrite(259, " &A2\0\0\08002C987978114".., 8192, 5840896) = 8192
    14051/180:     pwrite(259, " &A2\0\0\080\0 )879782F9".., 8192, 335872) = 8192
    14051/1:     lwp_unpark(186)                         = 0
    14051/185:     pwrite(259, " &A2\0\0\08004A98797 x ~".., 8192, 9773056) = 8192
    14051/1:     lwp_unpark(187)                         = 0
    14051/187:     lwp_park(0x00000000, 0)                    = 0
    14051/1:     lwp_unpark(188)                         = 0
    14051/1:     yield()                              = 0
    14051/188:     lwp_park(0x00000000, 0)                    = 0
    14051/186:     pwrite(259, " &A2\0\0\08005 98796 pA4".., 8192, 10952704) = 8192
    14051/1:     lwp_unpark(189)                         = 0
    14051/187:     pwrite(259, " &A2\0\0\08005998797 {FF".., 8192, 11739136) = 8192
    14051/1:     lwp_unpark(190)                         = 0
    14051/188:     pwrite(259, " &A2\0\0\08006 987977F95".., 8192, 13049856) = 8192
    14051/1:     lwp_unpark(191)                         = 0

  • URGENT - Oracle 9i, Oracle 9iAS, and Oracle 9iAS Portal Installation Problem

    ERROR :
    1. Objects with type JAVA CLASS with more than 30 characters are truncated to 30 characters
    2. There are only 30 objects with type JAVA CLASS are installed (instead of 334) mentioned on the troubleshooting guide
    3. Oracle9iASHttpService automatically stops after starting the service
    Environment :
    Windows 2000 Server
    Oracle 9i 9.0.1.1.1
    Oracle 9iAS 3.0.9.8.2 (Oracle 9iAS 1.0.2.2.2a)
    PDK Services for Java version 3.0.9.0.4 (from Patch used to install 3.0.9.8.2)
    Patches 8.1.7.1.1, 8.1.7.1.5, 3.0.9.8.2
    I installed the Oracle 9i, 9iAS, Portal and the patches based on the installation instructions (http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/DOCUMENTATION/INSTALL_GUIDE_9I.PDF)
    I tried adding the Sample Web Provider I got ORA-29531 error on HttpProviderDispatcher. Then I checked the Patch 8.1.7.1.1 installation, they are some scripts that need to be run that was not part of the 9i/9iAS installation instruction. I run the suggested scripts(catalog.sql, catproc.sql and utlrp.sql) and modified the jserv.properties to point the xsqlconfig.xml to ORACLE_HOME\oracore\admin.
    The error still persisted. From the Troubleshooting PDK Services for Java, one of the suggestion is to run the sql command :
    Select object_name, object_type, status from user_objects where object_name like '%HttpProvider%';
    which resulted to an object with name '/3334f18_HttpProviderDispatche' without the 'r' at the end
    and
    Select count(object_name) from user_objects where object_type='JAVA CLASS';
    which resulted to only 30 VALID object. According to the installation instruction, there are supposedly 334 objects.
    I checked the object_name of the other JAVA CLASS objects, all the names of the objects are all less than 30 characters. It looks like that the objects with the object_name > 30 are truncated to 30 characters.
    Then I rebooted the machine, when the machine went back on Oracle9iASHttpService stops automatically after it has been started.

    I have posted question on that thread and there is no specific solution from our problem. From the Oracle PDK Troubleshooting PDK Services for Java, it looks like there is a problem on the Oracle Portal installation. I tried recompiling the packages and my problem worsened. Now I cannot start the Oracle9iAS HTTP Service.

  • NAS 4.0 evaluation version installation problem on SPARC/Solaris 2.8

    Installing the NAS 4.0 that was bundled with a Sun SPARC/Solaris 2.8 throws
    the following error:
    ( Installed with quick installation after correct installation of iWS 4.0,
    from documentation Directory Server installed is not needed since NAS
    installs its own)
    In December of 1999, the Sun-Netscape Alliance announced
    i P l a n e t A p p l i c a t i o n S e r v e r 6.0
    * 100% J2EE compliant
    * reliability and high availability for non-stop service required by
    the Enterprise
    * scalability to go the distance for unplanned success
    * the best performance of any web application server
    * broadest support of tools for J2EE application development
    * high performance and complete solutions for internet enterprise
    integration
    Information and availability of this next generation application server
    can be found at
    Please enter the install location [usr/netscape/server4]:
    Please enter the FULL PATH of the Web Server Instance to be used
    for NAS:
    /usr/netscape/server4/https-sofiana03.sofiana
    Please enter the password for Netscape Directory Server Adminstrator
    and Netscape Application Server Administrator.
    The password needs to tb be at least 8 characters. [changeit]:
    Installing Netscape core components
    Installing Netscape Server Family Core Components
    Installing Netscape Directory Suite
    Installing Administration Services
    Installing Netscape Application Server Suite
    Starting the NAS install ...Installing Netscape Application Server 4.0
    Core
    Binaries
    Extracting Netscape core components ...
    Extracting Netscape Server Family Core Components ...
    Extracting Netscape Core Java classes ...
    Extracting Java Runtime Environment ...
    Extracting Netscape Directory Server ...
    Extracting Netscape Directory Server Console ...
    Extracting Netscape Administration Server ...
    Extracting Netscape Console ...
    Extracting NAS Web Connector Component ...
    Extracting NAS Core Server Component ...
    Extracting NAS Administrator Component ...
    Extracting NAS Deployment Manager ...
    Extracting Netscape Application Server 4.0 Core Binaries ...
    Fatal Slapd The required field AdminDomain is not present in the install
    info fi
    le.
    Configuring Administration Server...
    Your parameters are now entered into the Administration Server
    database, and the Administration Server will be started.
    Changing ownership to admin user root...
    Setting up Admininistration Server Instance...
    ERROR: Ldap authentication failed (151:Unknown error.)
    Proceeding with installation of Netscape Application Server (NAS)...
    Reading userinput log file ..... done
    Configuring web server plugin
    ....../usr/netscape/server4/nas/bin/nas_postinstall
    ..ksh[49]: /usr/netscape/server4/https-sofiana03.sofiana/start.1007: cannot
    creat
    e
    mv: cannot access /usr/netscape/server4/https-sofiana03.sofiana/start.1007
    /usr/netscape/server4/nas/bin/nas_postinstall.ksh[188]:
    /usr/netscape/server4/ht
    tps-sofiana03.sofiana/config/.obj.conf: cannot create
    mv: cannot access
    /usr/netscape/server4/https-sofiana03.sofiana/config/.obj.conf
    ERROR: Variable KIVAwebdocs was not defined. This command:
    /usr/netscape/server4/nas/bin/.kconfns
    /usr/netscape/server4/https-sofia
    na03.sofiana /usr/netscape/server4/nas
    did not set the DocRoot variable correctly.
    Please make sure that this file exists and is executable:
    /usr/netscape/server4/nas/bin/.kconfns
    This NAS installation might not be succesful.
    Please enter the WebServer docs directory pathname:
    ==>
    What's WebServer docs? entered usr/netscape/server4/docs didn't help.
    Thanks for the support
    Pablo

    hi,
    Make sure that your network uses DNS naming.
    This error occurs when a machine is not correctly configured to use DNS naming. The default fully qualified host and domain name presented during installation is not correct.
    To successfully install, you need to provide a fully qualified domain name that consists of a local host name along with its domain name.
    for example yoursystem is a host name and yourdomain.com is a fully qualified domain name.
    regards,
    saravanan

  • Oracle9iAS Portal Installation problem on Windows 2000

    I'm trying to install distributed oracle AS environment.
    There are two servers(A, B) with Windows2000+SP2
    and one of them, Server A, has domain controller in it.
    Server B is a member of that domain.
    In server A,
    I installed Oracle9i and Oracle9iAS infrastructure.
    Everything looks fine when I checked with EnterpriseManager website.
    These are the components I can see...
    BC4J, ClickStream Collector, HTTP Server Internet Directory, OC4J_DAS, OC4J_Demos, OC4J_Home, Single Sign-On:orasso:7777
    All the components are running except ClickStream Collector.
    In server B, as a middle-tier,
    I installed Oracle9iAS Portal/Wireless.
    Everything goes fine except Wireless Configuration at the end of the Installation Process.
    Ignoring Wireless error, I connected to EnterpriseManager website in Server A.
    I can see the <9iAS Portal/Wireless> instance registered that I just installed in Server B.
    Click into the <9iAS Portal/Wireless> Application Server, it seems OK except Wireless.
    But, when I opened <oracle_home>/assistants/opca/install.log in Server B,
    I could find some ERRORS while <configuring portal as a Partner Application for SSO Server>.
    INSTALL_ACTION:createPartnerApplicationConfig()
    INSTALL_ACTION:assocPortalToExistingSSO()
    It was sql*plus ERROR, and it says...
    SQL>ERROR:
    ORA-01017: invalid username/password: login denied
    Because of this error, I think, Portal DAD creation has failed.
    Could somebody can help me with this problem?

    Hi,
    The problem of installing Oracle Product on P4 computers comes from the symcjit.dll (Java Jusit in time compiler) which doesn't recognize the P4.
    I installed Oracle products on my P4 just by copying the CD's on a harddisk and manually replacing the dll (which is Version 3...) by a one I found to be Version 4.0.0.7.
    It is maybe not the best solution as it can result some instability (I don't know yet) but at least I didn't bought a brand new computer for nothing.
    The question is to know when Oracle will deliver some patches to allow a normal installation on P4s.
    Let me know if you want me to send you the dll.
    Regards,
    Jacques.

  • Ethernet Intel 82562 pro/100 installation problem on sun 10

    HI,
    I have installed sun 10 on my Pentium 4 machine. but sun os has not detected on board intel 82562 pro / 100 Ethernet card.
    I also searched for drivers on net but could not find any thing.
    any one will help me out.
    Thanks,
    Rajesh

    In your Applications folder, there should be an app caller Server.app
    Double-click that to start the server installation.

  • Oracle VM Server (3.2.3) installation problem on Sun X3-2

    Dear All Experts,
    I  have 2 hard disks and configure as RAID1, than create 2 virtual drives for OS (40GB) and Local Storage Repository (250GB) already.
    During VM Server installation, I saw 3 drives (a, b, c) and I don't know why drive C is created automatically?
    drive A: OS = 40GB, file system: ext3
    drive B: Storage Repository = 250GB, file system: ext3
    drive C: 3GB, file system: vfat
    I have to delete this drive C or not? if delete, it affect to system or not? how to delete it?
    your help is so appropriate.
    Thanks and regards,
    Heng

    Dear All,
    Any update for this issue?
    I have 2 virtual drives when I install OVM Server 3.2.3, I see 3 drives is C one more. Please check and give advice as below:
    root@ovmserver ~]# fdisk -l | more
    Disk /dev/sda: 42.9 GB, 42949672960 bytes
    255 heads, 63 sectors/track, 5221 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
       Device Boot      Start         End      Blocks   Id  System
    /dev/sda1   *           1        1305    10482381   83  Linux
    /dev/sda2            1306        5221    31455270   82  Linux swap / Solaris
    Disk /dev/sdb: 256.0 GB, 256049676288 bytes
    255 heads, 63 sectors/track, 31129 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
       Device Boot      Start         End      Blocks   Id  System
    Disk /dev/sdc: 3880 MB, 3880452096 bytes
    120 heads, 62 sectors/track, 1018 cylinders
    Units = cylinders of 7440 * 512 = 3809280 bytes
       Device Boot      Start         End      Blocks   Id  System
    Disk /dev/dm-0: 256.0 GB, 256049676288 bytes
    255 heads, 63 sectors/track, 31129 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
         Device Boot      Start         End      Blocks   Id 
    Please kindly give advice for this. your help is so appreciate.
    Thanks and regards,
    Heng

  • Installation problem 10g on solaris

    Hi ,
    I am trying to install 10g (10.2.0.3),install the base relaese 10201 successfully and when trying to upgrade to patchset 2 this is the what i am getting.
    /Disk1 $ ./runInstaller -silent -responseFile /wdm01/app/oracle/admin/WDMD/create/10.2.0.3_patch.rsp
    /database/10.2.0/10203/Disk1
    ./runInstaller -silent -responseFile /wdm01/app/oracle/admin/WDMD/create/10.2.0.3_patch.rspStarting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.8
    Passed
    Checking Temp space: must be greater than 250 MB. Actual 11038 MB Passed
    Checking swap space: must be greater than 500 MB. Actual 18253 MB Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2007-10-04_12-13-35PM. Please wait .../database/10.2.0/10203/Disk1
    Oracle Universal Installer, Version 10.2.0.3.0 ProductionCopyright (C) 1999, 2006, Oracle. All rights reserved.
    You can find a log of this install session at:
    /wdm01/app/oracle/oraInventory/logs/installActions2007-10-04_12-13-35PM.log
    .................................................................................................... 100% Done.
    Loading Product Information
    .................................................................................................... 100% Done.
    Analyzing dependencies
    ................SEVERE:OUI-10091:There are no patches that need to be applied from the patchset Oracle Database 10g Release 2 Patch Set 2 10.2.0.3.0 .
    Any suggestions ,Please let me know.

    Did you see the Note:454323.1

  • UCM 10gR3 installation problem on Solaris

    Hi,
    I have a problem installing Oracle Content Server 10gR3. When I run the setup script:
    *$ cd <path>/UCM/ContentServer/solaris-x86/*
    *$ ./setup.sh*
    I get the following error:
    Exception in thread "main" java.lang.NoClassDefFoundError: Installer
    I am running Solaris 10 on VirtualBox, and I have Oracle Database 10gR2 Installed. JDK 1.5.0_20 is installed with Solaris, but I have tried different JDK's, with no use.
    I tried setting the CLASSPATH environment variable to ".;/usr/jdk/latest/lib;/usr/jdk/latest/jre/lib", and running the script again, but I got the same result.
    Any Ideas?
    Thanks in Advance.
    Ayman Madkour
    Edited by: Ayman Madkour on Nov 2, 2010 9:05 AM

    hi,
    we are working production environment, for that reason we have to install UCM 10gR3 on sun solaries OS.
    UCM 11g will it support SUN Solaries OS ??
    can you provide me for UCM Installation guide on sun solaries OS.
    its very urgent requirement.please provide installation guide for SUN SOLARIES V.10 asap.
    Thanks in advance.
    Edited by: 792821 on Nov 30, 2010 11:20 AM

  • Sun, take responsibility for appserver7 installation problems!

    *** First set of problems...
    I'm having installation problems on both Solaris 8, (Ultra 480, 1GB RAM, latest recommended patches) and a Windows 2000 Server with SP2 (1GHz P4, 512MB RAM).
    I chose default installation directory and then the install
    complains that Pointbase 4.2 should be installed into the
    same directory etc. Cannot unselect the Sample apps and
    Pointbase options.
    *** Second problem...
    I have an instance previously installed on Windows 2000
    Professional with SP2.(1GHz PIII, 512MB RAM, 5GB space)
    When i start application server 7.0 , then i get the following
    message:
    Could not start the instance: domain1:admin-server
    Server failed to start:abnormal subprocess termination
    Could not start the instance: domain1:server1
    Server failed to start: abnormal subprocess termination
    Could not start one or more instances in the domain:domain1
    Could not start one or more domains
    Press any key to continue ...

    When you say that you choose the default installation directory and then the installer complained about Pointbase, what platform where you using? Had you already attempted installs in the past or uninstallations that did not complete properly?
    For your second issue, did you happen to change the host name of your machine? Try cranking up the log level (edit server.xml) to see what's causing the instances to fail on startup. Did the application ever start up after install? What things did you do just prior to the server exhibiting this behaviour?

  • Installation problem sun solaris 9 x86 on intel

    I am trying to install sun solaris 9 x86 intel platform edition on my home pc hp e-vectra, configuration is PIII 800 Mhz, 10 GB HDD, 128 MB Ram, 17" color monitor, but it giving me following error :-
    BooT Panic: trap type e, error 0 at 117499
    Cr0: 800000011, cr1: 4, cr3: 17e000
    Eax: 0, ebx: 7e2c, ecx: 0 edx: 16e350
    Es: fffffffe, edi: 17dfe0, ebp: 7e40, esp: 7e20
    Entering boot debugger:
    Please help me, how can I install sun solaris 9 x86 on my HP E-Vectra PC.
    Kalpesh Mehta

    I had similar problems several months ago. I suspect this happens when host pc does not have floppy drive(or bios somehow misreports it) as it was in my case. Solaris 8 seems to work fine in the same environment, so I keep using it for now. Possible workaround might be to use DCA from Solaris 8: Installation of Sol9 started just fine after I entered Sol8 DCA and asked it to boot from Sol9 CD.
    Hope this problem will be fixed in subsequent Sol9 releases.
    Victor

  • Sun Solaris 10 installation problem on IBM ThinkPad R31Notebook

    Hello,
    I have tried to install Sun Solaris 10 on my IBM ThinkPad R31 notebook, but the system has problem at initial stage of loading the installation software from CD. Here is the message I see on the screen when the CD is loaded:
    loading stage2 ....
    GNU GRUB Version 0.95 (639K lower / 514880K upper memory"
    Solaris
    Solaris Serial Console ttya
    Solaris Serial Console ttyb (for 1x50, v60x and v65x
    SunOS Release 5.10 version Generic_118855-33 32-bit
    Copyright 1983-2006 Sun Microsystems, Inc All Right reserved
    Use is subject to license terms
    Rebooting
    Rebooting
    Rebooting
    Rebooting
    Rebooting
    Rebooting
    Rebooting
    Rebooting
    I changed both memory and the hard drive but I still have the same problem. Can anyone please tell me what the problem might be or what remedial step I should take to install Solaris 10 on R31?
    Thanks

    Did you try install check CD before the installation?
    I think that there might be two main reasons:
    1. Your computer is not supported
    2. Hard drive may need to be formated to FAT32 or UFS

Maybe you are looking for