Position of Paramter in BI report

Hi,
I have created some parameters.Those are automatically showed on the Report View page by default at some postions.What I need is to adjust the parameters on the screen at my convinient postions.
Can anybody help?
Thanks & Regards,
Ajay

Ya that is doable.Can you brief your exact problem

Similar Messages

How to Change the position of Column in ALV report

Hi Follks,
    Is is possible to change the position of column in ALV report?.If yes then how?
    Basically my requirement is, that user want afacility where , he should be able to change the position
    of column aftre he runs the report.
    Eg: After running the report , user felt that column 5 should be at position 2 , in that case he should
           be able to drag column 5 at position 2 and vice versa.
    Please help me, how to solve this issue.
    Note : I am using NW 7.0 SP 9
    Regards
    PG
Edited by: PG on Apr 13, 2009 11:10 AM

HI PG,
do below whie filling the filed catlog
wa_fieldcat-fieldname        = 'Field1".
wa_fieldcat-COL_POS = '1',
append wa_fieldcat to it_fieldcat.
wa_fieldcat-fieldname         = 'Field2".
wa_fieldcat-COL_POS = '2',
wa_fieldcat-fieldname         = 'Field3".
wa_fieldcat-COL_POS = '3',
Thanks!

Position of parameters of a report using a Logical Database

Hallo all,
Is there any way that I can make the parameters defined by me in a report to appear <b>before</b> the ones defined by the Logical Database it is using ?
I searched but I couldn't find something relevant.
I would like to avoid having to copy and modify the LDB program.
Thanks

Here are a couple of things you can do:
1. Right-click on the subreport and select "Format Subreport...". Turn off the borders on the subreport.
2. Right-click on the subreport and select "Size and Position". Set the X and Y coordinates both to 0. This will place the subreport at the top-left of the section where it's located.
3. In the subreport, suppress ALL of the sections that you're not using.
4. Make the height of the subreport fairly small - it will expand to the size of the data it contains.
5. Put the column labels in the Page Header of the main report, using markers on the ruler to identify the placement of the left side of each column header. Be sure to line the markers up to a specific "tick mark" on the ruler.
6. In the subreport, place markers at the same tick-marks on the rule as you used for the column labels on the main report. Then align the fields in the subreport with the markers.
This should get you close to the format you're looking for. If it's not exact, you can look at the report in Preview and tweak the position of the column labels to match the data in the subreport.
-Dell

Date field positions vertically and overlaps other report items

I have a date field on my reports and they are positioned on the right of the report canvas where they have enough cusion space. Somehow they[label and the date itself] are coming appearing on multiple lines..one below the other instead of appearing in a single line. My settings are:
Vertical Alignment:Fixed
Horizontal Alignment:Fixed
Base Printing:Enclosing
Keep with anchoring object:No
The field displays whatever fits on 8 units on the grid and then moves the remaining data on next line. My reports are not character mode.

I think I need to expound on my message.
I am actually upgrading from Oracle reports 6i to oracle reports 9i. The date field prints successfully on one line in the margin for the oracle 6i reports. HOwever there is some wrapping for the oracle 9i reports. What i have noticed is that when I place the date field anywhere within the range 0 - 8 units on the paper layout grid in the margin, the date prints successfully. Otherwise it wraps. I have no such problem in Oracle 6i.

How to use lexical paramter in oracle reports

I have a query like,
select * from t1 where &c1=:v_srep;
where t1 is tablename
c1 is column name
How do I create &c1 and how should I populate it ?
Thanks,

From Oracle 8.1.5 database, we can use dynamic ref cursors.
With dynamic ref cursor we can really avoid the use of lexical parameters in Reports.
With static ref cursor this is not possible in all cases.
For example, if we need dynamic WHERE, we practically can't use static ref cursor.
But, problem is that Reports needs static ref cursor type for building Report Layout.
Solution (as i know, first published in my post in MetaLink Reports Forum,
thread "Report based on Ref Cursor or PL/SQL Table", 24-Aug-01) is:
in package specification we must have both ref cursor types,
static for Report Layout and dynamic for ref cursor query.
Dynamic ref cursor examples:
"Dynamic Table in the Second Query with Oracle Reports"
http://www.quest-pipelines.com/pipelines/plsql/tips03.htm#JULY
"Using a Collection Instead of a Temporary Table in Complex Reports"
http://www.quest-pipelines.com/pipelines/plsql/tips03.htm#NOVEMBER
Regards,
Zlatko Sirotic

Paramter visibility in Report Output

Hello All,
I am having a requirement to "Print Parameters in a output(pdf,xls,csv) of a report", which i am providing to my query for fetching a data.
Is this possible, yes then how?
Pls Help.
Regards,
UKJ

If you've tried it, then probably not; I'm lucky enough to have BI Publisher.
An alternative approach would be to UNION it into your query. E.g.
SELECT
:p1_dept,
null,
null
FROM
dual
UNION ALL
SELECT
emp_id,
ename,
manager
FROM
empYou can play around with this to get the layout you want. If you don't want the page item to appear in the main report on your Apex page, then you can have two reports on the page, one without the page item which displays as a standard report and the other report with the page item that only displays as a CSV link. To get a report to display only as a link, create a report template that only has a CSV link in it.
I hope that makes sense.
Shunt

How to is lexical paramter in oracle reports

I have a query like,
select * from t1 where &c1=:v_srep;
where t1 is tablename
c1 is column name
How do I create &c1 and how should I populate it ?
Thanks,

Pl see
How to use lexical paramter in oracle reports

Position of select list on report

Sometime when I add a select list to a report region, it will appear at the top of the report. However, when I do it to another report, it appears at the bottom.
Anyone have any ideas about this strange behavior?
By the way, I did change the sequence of the drop down to before the report sequence, but it didn't have any effect.

I would take a look at the Region that you selected the item be placed in. There are all different choices of where to display a region item if you look. There are two choices. One of the choices is to display an item in the region and the other is to display an item among this regions theme or something. I can't remember for sure but you will find your answer in the region definition.

Position of 'Next' button in Report

Is there a way of adding a 'Next and 'Previous' button in a 'Report from a wizard' to the top of the resulting data records in addition to the ones below?
Cheers,
Arnt

Hi,
With the reports it is not possible. If you want to achieve something like this you should make of dynamic pages to develop the output and the buttons.
Thanks,
Sharmila

Position of Parameter in BIP Report

Hi,
I have created some parameters.Those are automatically showed on the Report View page by default at some postions.What I need is to adjust the parameters on the screen at my convinient postions.
Can anybody help?
Thanks & Regards,
Ajay

This is exactly my case. There are NO options to customize BIP Report's control area (where filters are). There is NO way to change look-and-feel of Online Report Viewer!
In my case we've shifted to Dashboards (user set Report parameters via Dashboard Prompt), but here is another problem...
OBIEE - Publisher integration(multi-select value via Presentation Variavle)
It's really ununderstandable why OBI is so expensive and so bad!
Edited by: beloblotskiy on Mar 4, 2011 2:37 AM

Report for Org units with no positions

Hi
I am searchign for a report through which I can find all org units whcih have no positions assgiend.
Please suggest.
Thansk
Regards
RKGSAP

HI,
follow the path -
SAP Easy Acces->Human Resources->Organizational management->Info system->Organization Unit->Organization Structure
Here you have the SAP query, execute the one that ftis in your requirement.
Also check the same in the Position node. Explore the 'report Structure' node as well.
Thanks & REgards, SWapnil Mishra

Report on Positions directly linked to Authorization roles

Hello All,
Is there a report in SAP which can tell us which positions are assigned to Authorization roles or which Users are directly assigned to Authorization roles rather than through their Positions?
If not a report is there way we can find it out?
Regards,
Ahmad

No Standard report available to show Positions directly linked to Authorization roles

Standard report-Position(urgent)

Hi
Is there any standard report where we can kown an employee assigned to two different Positions.
or Position is assigned to two or more employees.
Thanks
Archana

Hi
1. From Technical point of view it can be checked by HRP1001 , but If user wants to view the Person assigned to two positions is there any standard report.
2. If any person reports to two managers
I would like see his reporting structure in one screen.
So, would like to see his Position(S)&Person(P) reports to (Level-I)Position(S)&Person(P) and (Level-II)Position(S)&Person(P).
Is there any standard report.
Thanks
Archana
Edited by: archana bharatwaj on Jan 23, 2008 4:33 AM

Holder of two positions, reporting to multiple managers in Travel managemen

Dear Consultants,
Our configuration is as follows:
We have implemented Travel Management in our organization.
A Person is assigned %70 capacity of Position A, and is assigned %30 capacity of Position B.
Position A is reporting to Position X and Position B is reporting to Positon Y.
i.e. , Position A and Positon B are reporting to seperate positions.
My question is:
According to our travel management workflow logic , if the holder of the shared position applies for a travel request, The approval of the travel request should go to Position X ( The position which is heading Position A ) Obviously because our employee is holding %70 of position A, and is primarily reporting to position X.
Now, we checked the workflow, and it's working fine from R/3 , however, the Enterprise portal is showing Position Y as the position which should approve the travel request.
Thanks !

Generally
Even thogh if he is haveing many approver the request will go and have to go to that manager in which the Position where his working percentage is more
Ex: X employee is working for three projects A B C for A 25 % B 25% C 50% so the approve shd go to C project manager
are u doing this with the help of the work flow please let us know
might be useful iam not sure jsut want to share

Report alle Business Roles assigned to Position

Hello,
I'm looking for a report wich brings a coomplete Objectdescription of an incorporate position in a organizational Model. Very important is the information which business role (we use CRM 2007) is assigned to the position.
I checked already report rhstru00 but I don't know which structure parameters I have to take to get out the required information.
There must be a way to get this information.
Thanks a lot in advance!
Best Regards
Stephan Jung

Step1
U should know the Personnel number of the person u want to assign role.
Step2
PA20 to do Org assignment
Info type = get the position number
Step3
Go to PO13 for Position number
You assign the position number to Role (basically you create a relationship b/w Position number and Role here)
Define relationship B 007 Relationship type (Always select this Relationship type)
Step4
Go to SU01; create a user ID for THAT Personnel number ( If the user don't have one)
Step5
Go to PA30 you define relationship between Personnel # and User ID
Create Info Type 105, Subtype 0001
In ID/Number = User ID and save
For personnel number
Step6
Run PFUD
To update user master record i.e. to enter the role that is assigned to that position in org level. Put the Role name and select Reconcile User Master Data and execute.
Or
In SE38 Run report RHPROF0

Position of Paramter in BI report

Similar Messages

Maybe you are looking for