Possible conflict with other cd ripping software.

Since installing iTunes I have not been able to import CD tracks directly into "Cool Edit Pro" nor have I been able to create image files of my cd's with "PowerISO".
Prior to installing iTunes both worked flawlessly.
I have tried un and reinstalling iTunes and subsequently also re-installing "C.E.Pro" and "PowerISO" but can't get either program functioning again.
My Nero software so far still works just fine.
Perhaps iTunes has changed something in the registry affecting these other two programs.
Any suggestions would be greatly appreciated.
cheers
Windows XP Pro 1.67 gig AMD athlonXP, 512mb ram

hi bob!
the following techniques are typically used to get itunes importing again (and are oriented towards that), but they could be applied to the other programs too:
iTunes for Windows: Troubleshooting CD issues caused by device filters
loove, b

Similar Messages

MainStage message: possible conflict with third party midi or audio drivers

Just when I thought everything was going to be ok...
MainStage gives me a message that it detects a possible conflict with third party audio or midi drivers. The only midi device I'm using is class compliant (doesn't need a driver). My audio interface is an Apogee Duet and I'm using the most recent driver. Logic registers no such complaint. MainStage freezes. Any ideas?
Thanks,
Mark

Hello.
I am seeing this whenever MIDI events are being sent into either Logic or MainStage (primarily MainStage), while they are launching. On my setup, this will either crash the application during launch, ( sent to Apple ) or trigger this "...3rd party conflict / driver..." dialog.
In either instance, disabling incoming MIDI messages by turning them off on all connected MIDI devices, or as suggested, waiting to connect the device in question until, the application is fully launched, fixes my version of this issue.
** Please Note: In my experience, increasing the number incoming MIDI messages, exacerbates the issue and, makes a dialog or crash more likely to occur.
Hope this is helpful.

When I open an encryted pdf file in my Hp Slate 7 voice Tab it was unable to open the pdf file.Tje same file was opening with other pdf reader software.Kindly Help.

When I open an encryted pdf file in my Hp Slate 7 voice Tab it was unable to open the pdf file.Tje same file was opening with other pdf reader software.Kindly Help.
[spam link removed]

Could you please send the pdf to [email protected] so that we may investigate the issue?
Thanks,
Adobe Reader Team

Are there any reported conflicts of CS6 (Stand-alone) with other Non-Adobe Software Programs?

I just downloaded a trial version of CS6 (standalone) 64 bit for my Imac 27" 3.06 dual (OS 10.8.1) 4 GB Ram.
I tried it, and then closed down to compare it to anothernon-Adobe program.
As soon as I tried to open a file image in this other program, I could';t open the other program.
I kept getting that bothersome Apple notice where you write a note, send it, and reopnen the software.
This happened over and over,until I decided to uninstall CS6 and reboot my IMac.
The problem with the other Non-Adonbe software disappeared, and that program functioned as beofre.
Has anyone experienced this problem?
I prefer not to mention the other porogram, but that company has been notified as well.
Thanks.

Hi Chris & John,
Thanks for taking the time to reply.
What I'm going to try and do is upload CS6 extended (Photoshop - stand alone) if I can.
The other program is a commerical (paid with a serial number) called Fluid Mask 3.
Is there a possibility that CS6 can create a problem with OS 10.8.1, which then interferes with my other program?
If I can re-load CS6 extended, and I get the same problem, what I'll do is screencapture the "issue" that Apple OS 10.8.1 said I had,
and attach only a portion of the key parts to a reply here.
Stacey Bindman

Adobe extension manager messages "the following extension conflicts with other extensions

Hello,
I got this message from Adobe Extension manager but it didn't list what extensions or other plugins that conflicted with the hollywood2 2.0 plugin that i was trying to install, anyone else have issues downloading plugins through extension manager?
Any help is greatly appreciated.
Thanks, Kelly

Seems to be a lot of this going on. Wondering if we're wasting our time with this??!!

Possible conflict with Acquisition. Pls HELP/COMMENT.

I’m using the latest version 123.3. Somehow it conflicts with SAFARI, ie when Acquisition is on, no webpage can open in Safari.
It gives a 'Safari can’t open the page' error.

Have you tried lowering your upload/download bandwidth limits and the number of concurrent uploads/downloads allowed?
Yang

CS4 Design Premium conflicts with other programs

I have installed CS4 Design Premium with great difficulty on a Windows XP service pack 3 machine. I also got to about 90% and the program would stop. I eventually installed Photoshop, Illustrator, Flash and InDesign individually. It appeared that all programs were working except Illustrator. When I tried to launch Illustrator I received the following: "Illustrator.exe Bad Image The application or DLL C:\Programs Files\Adobe\Adobe Illustrator CS4\Support Files\Contents\Windows\Alcid.dll is not a valid Windows image. Please check against your installation diskette."
I ended up uninstalling Illustrator. I was going to reinstall it but then I started having other issues.
Since installing, everything slowed to a crawl. Internet Explorer crashes, even Notebook crashes. There seems to be some sort of conflict with CS4 causing instability. If Adobe support was available I would call them. They are unavailable until October 14. Does anyone have any suggestions?
I am going to uninstall all of CS4 in hopes of stabilizing my computer. Other than that I don't know what to try.
Any help would be appreciated. Thanks.
Windows XP Service Pack 3
2.80 GHz
1GB RAM
Device drivers are up to date

I probably will buy more RAM but I don't think that is my problem. I have the conflicts without even opening any of the Creative Suite Programs. Something running in the background is probably the cause. What does Creative Suites run in the background? I uninstalled the Media Player. I am wondering if it is related to Acrobat 9 Pro, Acrobat.com, or Adobe Drive? Do I need Acrobat.com? What for? What is Adobe Drive?
By the way I have over 400 GBs of hard drive space available. When I look at the RAM usage it is OK. Thanks for any help.

Cryptocme2.dll - conflict with other applications

Hi,
A few machines in our firm have ArcServe Manager installed. This is causing a dll conflict with Crystal Reports 2010. The dll in question is cryptocme2.dll.
If I rename that dll in the Arcserve folder, the crystal report can render without problems. This Arcserve is in the Windows Path environtment variable, however shouldn't crystal reference it's own?
We originally thought it was an install issue only - Error 1904 when installing Crystal Reports 2010 Redistributable however it turns out this is a runtime issue as well.
Can we please fix Crystal Reports so that it references it's own cryptocme2.dll?
Thanks

Hi
CR for VS2005 is already installed on my workstation.
When installing CR for VS2010 SP1, the following error message pops up :
Error 1904. Module C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\ReportPromptEMF.dll failed to register. HRESULT -2147023898.
If I rename the cryptocme2.dll file which is in the path (environment variable), the installation can end successfully.
As long as I keep that dll renamed, everything works fine.
However when I restore the original file name, I can't even open a rpt in design mode ("unable to open document" error message from SAP Crystal Reports ActiveX Designer)
And at runtime :
Retrieving the COM class factory for component with CLSID {F734A321-8381-4FFD-A614-139E8906DC83} failed due to the following error : 800703e6.
Hope this will help
Thank you for your time
Regards
LV

Possible confliction with external hard drive?

Hi guys, I'm sort of new here, but I could really use some help.
I love my iPod (30 gig Video), I've had it for just over a year, but last week it all of a sudden started screwing up on me. I'm sorry it's such a lengthy explaination, but I haven't been able to find help anywhere else... If you don't feel like reading it, essentially my iPod seems to be conflicting with my external hard drive.
I keep all my music on a 150gb external hard drive since my laptop's 30 gigs barely has any room left over with all the programs and photos I have on it. iTunes has worked fine in the past with playing/syncing music from an external hard drive but all of a sudden it's decided that iPod and Hard Drive don't mix.
When I have my hard drive plugged in by itself, everything is normal, and iTunes can play the music fine. Though once I plug my iPod in, iTunes and the whole computer freezes up. I get the usual "Do Not Disconnect" message on the iPod, and it seems to be doing something, but everything on the computer just stops. I can click the start menu, I can click the close button on iTunes, nothing happens... UNTIL I unplug my iPod. Then everything unfreezes and whatever buttons I clicked while the screen was frozen do their appropriate action. If I had clicked to close iTunes it would then close iTunes... If I closed iTunes while the iPod is plugged in (which does nothing), then unplug the iPod causing iTunes to actually close, I get a message saying that the iPod needs to be reformatted to work with Windows and I should restore the iPod within iTunes to solve that problem.
At the time, I hadn't tried the iPod alone, without the hard drive plugged in (since I keep the hard drive plugged in all the time), so I figured it was a problem with the iPod, rather than a problem with the hard drive.
So I took the "restore" idea, and went to my friend's computer, which is running Vista. He has iTunes, and his computer is fine. I plug my iPod into it, iTunes opens up, things work great. So the problem didn't seem to be with my iPod. I took the opportunity of having my iPod in a working iTunes environment on my friend's computer, and I restored my iPod, clearing all the songs off of it, which is not really a big deal, since all my songs are on my ext. hard drive anyway. I took my iPod back to my computer, and nothing changed, I still had that problem, and I then realised that the problem only existed while my hard drive was plugged in.
It was after I restored it that I realised if I unplug my hard drive, and have my iPod plugged in alone, everything works fine. It opens up iTunes, it's recognised by My Computer, things are normal, except for the fact that I can't do anything, since all my music is on my ext. hard drive, so I get to look at a whole library of songs with little exclaimation marks beside them. Syncing didn't do anything except transfer the handful of songs from my library that AREN'T located on my external hard drive to my iPod, and of course, once I tried plugging my hard drive in... frozen.
I managed to figure out that if I started iTunes with my hard drive plugged in (so iTunes would know that the songs are in the right location), then unplugged the hard drive, plugged the iPod in (so iTunes would recognise it), then plugged the hard drive back in, things would work alright, though when I tried syncing it, it went painfully slow and stopped after about 3 albums, and this process hasn't worked since, it just freezes up again.
I know I could just copy songs slowly to my computer, and sync them to my iPod from the computer rather than the hard drive, but that would take ages, and I'd like to have the problem fixed rather than to have to go through that process any time I wanted to change what's on my iPod.
So that's my problem. I've followed the "5 R's" that the support here seems to swear by, I have tried unistalling and reinstalling iTunes twice, I've uninstalled both iTunes and the iPod updater stuff, and then installed everything clean from the CD that came with the iPod. I've tried renaming the drive letters of my ext. hard drive and my iPod in case there was some sort of confliction there, nothing seems to have worked. I don't think I changed anything with my computer that would cause this change (I ever restored Windows to a date before this problem occurred), and as for the update to iTunes 7.4.1.2, I didn't update it until after this problem started, so it wouldn't have been caused by the update.
I hope that made sense... If anyone can give me some help as to how I can get my iPod back working on my computer I'd be incredibly grateful and thanks in advance!
If anyone knows what's going on, it's probably somebody here

This sounds like more of a Windows specific iPod problem. You may get better responses if you posted it in that specific section of the forums.

Final CAT Pro Plugins Services cause shortcuts conflict with other softwares

I just installed Final CAT Pro Plugins. They are useful but cause me an issue:
Since they are based on Services OSx system, they remain active also in other programs, so that when I use, for instance, Logic Pro, I have some shortcuts which match the Final CAT Services ones, and in the moment I digit them for Logic use they don't work in Logic and moreover cause FCPX to launch.
So.... How can I do? (Apart from changing the shortcuts....)

Hi MN Studio,
Thanks for this question. My name is Jeroen, I am one of the developers of Final Cat Pro. After we noticed your comments on this forum we decided to rewrite the services. We hope to solve this problem with the new release early next week.
Actually, we have the beta version of the new release ready. If you are willing to try it, send me an email so you can test it and let us know if the problem is solved. You can send us an email via [email protected] or directly at [email protected]
If the new software works out, I can send you the updated version if you want?
Thanks,
Jeroen

PI 7.0 - SMICM - Host Name - Conflict with other places

Hi Friends,
We have host name conflict in SMICM and in other places.
For example, in SMICM it shows the host name 'A' for HTTP protocol and it is green, where as in other places like in RZ10 (Profiles in ABAP), Exchange Profiles (Connection Parameters, Host name), in SLD and in Visual Admin the host name is mentioned as 'B'.
At present, the messages are failing in SXMB_MONI with the error "CLIENT_RECEIVE_FAILED 402 ICM_HTTP_TIMEOUT ".
When we checked the paramter "icm/host_name_full" in RZ11,it shows the empty value.
This problem comes in our quality PI system, ABAP stack.
Could you kindly clarify in SMICM for the HTTP service from where the host name is taken and displays here?
Kind regards,
Jegathees P.

Connect to the operating system. Check this file (replace xxx with your SID and, if applicable, 00 with the correct instance):
C:\usr\sap\xxx\SYS\profile\xxx_DVEBMGS00_ILBNKxxx
Find this line:
icm/host_name_full = hostname.company.corp
Is this maybe empty / incorrect / incomplete?
After changing this the server needs to be restarted.
Sometimes we had strange behaviors after host name changes, which went away after going to sicf -> execute -> right-click on default host -> deactivate -> right-click again -> activate -> in the pop-up click the second activate button, which is for activating the system and all dependent entries.

Possible conflict with iTunes 7 and non-admin account

I've tried burning cd's in my usual windows account (limited) and it comes up with the error message "disc burner or software not found", but when I log into my admin account and try and burn an mp3 then it burns just fine. I wonder if they changed the way version 7 burns cd's...
Any solutuions or fixes?

I'm not really looking for a way to roll it back. I was just hoping to find a fix for the current version, or make them aware that there is a problem with running it in a non-admin account.
Thanks for the info though!

Conflicts with other programs.

Dreamweaver MX 2004 seems to be preventing oher programs from
working correctly. When I try and open some programs they won't
open and I see the Dreamweaver (green circle with "d") in place of
the correct programs "symbol" in my Dock.
I have a Mac G4 running on OS X 10.3.9.I keep getting the
serial # prompt when I open Dreamweaver. I tried downloading
Product Serialization Hot Fix Updater but it didn't unzip after I
downloaded it. (I have Stuffit to unzip files). Therefor I couldn't
ru the fix. BTW I had downloaded the trial version and the trial
period is over. I

I probably will buy more RAM but I don't think that is my problem. I have the conflicts without even opening any of the Creative Suite Programs. Something running in the background is probably the cause. What does Creative Suites run in the background? I uninstalled the Media Player. I am wondering if it is related to Acrobat 9 Pro, Acrobat.com, or Adobe Drive? Do I need Acrobat.com? What for? What is Adobe Drive?
By the way I have over 400 GBs of hard drive space available. When I look at the RAM usage it is OK. Thanks for any help.

Integration with other IT Management Softwares

Dear experts,
With the IT Services and Asset Management solution and in combining, SAP CRM, SAP ERP and SAP Solution Manager applications, it is possible to support all Service Management processes (Service Support and Service Delivery).
SAP Solution Manager can also be used for Application Management processes.
But we still need external applications for specific segments such as Event Management, Job Scheduling, DBMS Management, Network Management, Server Management, Licence Management ... in order to manage SAP and non-SAP systems.
SAP documentation states that Third party tools could be integrated via open interfaces in Solution Manager. But what is the result? Once third party tools have been integrated to Solution Manager, can we see, for example, all licences for all products in our IT landscape in Solution Manager or is it just a link to this third party application? What is the purpose of the integration of a specific IT management tool into Solution Manager?
Thanks in advance,
Stephanie

Hi Nelson,
You can't replace the current Anychart with FusionChart, but you can upgrade to a newer version of Anychart if you want.
If you want to integrate FusionCharts, you add javascript and a flash file to your page and provide xml (for ex from a process) to it. I believe Scott Spendolini had these steps in his presentation of ODTUG, which you can download from that site.
Regards,
Dimitri
-- http://dgielis.blogspot.com/
-- http://www.apex-evangelists.com/
-- http://www.apexblogs.info/

No Signal to Screen - Possible Conflict with MOBO?

I am sooo confused, let me give you the basic problem first.
I am putting a XFX HD 6950 Dual bios GPU into my PC which is a MSI Z77 mPower MOBO with i7 3770k, 16gb ram, seasonic gold 650w modularPSU 120gb m4 ssd with several normal hdds.
Basically I turn the computer on and the screen stays blank, I can hear the computer boot up from the microsoft noises so I know it is turning on, but no signal to the screen. The card works in another setup on a asus mobo with an i5, so I know the card works, and I have put a GTX 780 into this computer so I know the computer works...
I have also tried using the dvi, vga and mini display ports with no success. If I take the GPU out and run off of the onboard graphics it boots up fine. If I leave the onboard graphics connected and put the gpu back in and link it up to a second monitor both screens do not work.
I have updated the Bios to the latest version on the msi website. I have tried to pre install the drivers for the GPU but I cant seem to do that without the card installed, and I cant do that because the screen wont turn on when it is installed.
I have also tried putting it in a different pcie lane and this did not work.
I have tried saying "Oculus Reparo" with a wand in my hand, this does not work.
Any suggestions would be greatly appreciated!

You tried this version? https://forum-en.msi.com/index.php?topic=163872.msg1275786#msg1275786
Try a different monitor?

Possible conflict with other cd ripping software.

Similar Messages

Maybe you are looking for