Post MR11 report

Hi,
Is there any report which identifies which documents were 'Maintain GR/IR clearing (MR11'd)' in a particular period
Thanks

HI,
Though you may view a document via MR11SHOW, this is onlly per document.
However, you may check the document type assigned to MR11
Material management > Logistic Invoice verification > Clearing Account maintenance
then view FB03
Hope that this helps
regards

Similar Messages

MR11 report

Hello Experts,
MR11 report (SAPRCKM_MR11 program) doesn't have the ALV grid display and hence we are not able to download the report into excel.
I have seen few posts saying to change the 'Scope of list' from BEST to ALV in the config. Will this really help in getting the ALV Grid display for the report? If not, could anyone share your thoughts?
Thanks
Sandy.

Hello Sandeep,
Have you try this way.
From Menu Bar,
Select System -> Select List -> Select Save -> Select Local File.
You will prompt will save list option for excel spreadsheet download.
Regards,
Sameer

My MacBook Pro is running VERY slowly. After reading other questions and responses, I ran an EtreCheck, but do not know how to post the report here. Any help would be greatly appreciated.

My MacBook Pro is running VERY slowly. After reading other questions and responses, I ran an EtreCheck, but do not know how to post the report here. Any help would be greatly appreciated.

My MacBook Pro is running VERY slowly. After reading other questions and responses, I ran an EtreCheck, but do not know how to post the report here. Any help would be greatly appreciated.

Inventory posting List report

Hello,
I have an A/R invoice posted of an item as its Quantity is 2 in the SAP Business one system. when i go to the Inventory posting list report, this same report only displays the Qty as 1 instead of 2. what could be the reason why this is happening? This problem is specific to this one invoice. The rest of the invoices have correct Quantities displayed in the Inventory posting list report.
Thank you.
Regards,
Maureen.

Hi Peter,
please see these screen shoot for this specific item and the corresponding inventory posting list and also see another invoice of the same item.
pic 1, invoice 90001017
pic 2. its corresponding inventory posting list.90001017
pic 3 the same item , different invoice
pic 4 corresponding inventory posting List for invoice above
note of the differences on the Quantity it displays.
thank you.
kind regards,
Maureen.

Inventory posting list report not shown transaction data

Dear Viewer,
As my english is not good inspite of this i am trying to give you detail where i have stucked in SAP.
As you know there is some standred report in SAP .inventory report is one of them.
when i am going to see inventory posting report in inventory report i am unable to see all transaction .
Like recv qty,issue qty,daily sub total so on somthig like taht.
When i login to other super user id i am able to see all these data.This is happen only one super user id dont know why.
Please help me out regard this.

Hi Divya,
Do this,
->> Login SAP(which user id did not show the issue Qty, rec qty & total) in normal user id.
->> Goto Inventory module.
->> Inventory reports.
->> Inventory Posting List.
-> Run the Inventory Posting List report.
->> Goto Form setting on Menu bar.
-> put the Tick mark in Visible button on Form setting window.
Regards,
Madhan.

Macbook Air running slow--receiving error message when trying to post Etrecheck report

My Macbbok air is running really slow over the past couple of weeks. I'm pretty new to the world of Macs so not sure what I can and cannot do to improve performance.
I am trying to include the report from Etrecheck in my post, but everytime I paste it and attempt to post I receive a message that says: You have included content in your post that is not permitted.
If anyone can tell me what I am including that is not allowed I will fix it and post the report so I can be helped.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

Extending the beta! How to compose and post defect reports.

There is no such thing as bug-free software, and LR is no exception to that. Even more, v1.0 releases, even those with long beta programs, can be more brittle than expected. We've already seen a few things that look like real defects which could be addressed in a future release. This is normal and expected, and now a team at Adobe will be dedicated to maintaining the LR release into the future.
This posting is sort of asking the question "how can we help", with a fair bit of opinionated ranting of my own on the subject. Take my comments with a grain of salt, of course, but I'm not sure I say anything that hasn't already been said a million times before.
Firstly, is there a place where bug reports should be posted that Adobe will see? Is there a document that describes how Adobe would prefer such reports to come in, perhaps with suggestions for supplemental material they'd like to see passed along with the defect report? Not only does this provide a place where Adobe can track raw bug reports, it can make perturbed users feel better, since they've been able to do something specific and active.
Full disclosure: I am a software developer by trade, and I maintain shipped releases of code for a living. I know how I like to see problem reports and it drives me *crazy* when a we get a vague report formatted with no punctuation, in all lower-case, containing no specific details. Usually these come with bizarre screen-shots embedded into a Microsoft Word file. Not helpful.
It drives me crazy because I know there is a bug in there somewhere, it just isn't necessarily the bug seen by the end-user or understood at first blush by the developer. I call this the "real bug", and it can be hard to suss out, sometimes.
I assume that the following basics are /probably/ helpful when reporting defects against LR v1.0:
- System details. At least the exact platform version and release. Possibly with a short run-down on CPU speed, amount of RAM. Mac users should probably be sure to clarify what CPU they are running.
- Clear steps to reproduce, if possible. Describe the problem exactly as you see it, being sure to use the language and nomenclature that the application uses. Capitalize app-specific controls exactly as you see them in the app, to make it clear what you are doing.
Try to reduce the problem to the barest set of operations.
- For things like "hangs" and "crashes", I'm guessing that most supported platforms have a way of capturing these details. I cannot and will not speak for Adobe. But! if I was looking at a crash or hang, I'd want any and all crash logs (OS X) or Dr. Watson (Win32) that were related to the former and the sample output (OS X) or Process Explorer dump (Win32) for the latter.
Details on how and where to post defect reports would be nice. Sounds like a FAQ item, at the least!
Finally, here are some things that drive me crazier and I feel are *not* helpful:
- Defect reports that intersperse observed behaviour with guesses about what the problem really is. No one knows better the potential places where symptoms could stem from except those people maintaining that codebase. I'm a smart guy and code for a living. I would never presume to know the precise inner-workings of Lightroom without access to the source and probably a run at it in a development environment.
- Arguing for how terrible or disastrous a particular "bug" is, and how it needs to be addressed as critical for immediate correction. Everyone, including me, finds their own bugs most critical. The problem is that software maintenance requires putting everything into perspective, evaluating each defect on its own merit, as well as how risky a fix for the defect might be. This last part cannot be minimized. Changing code incurs risk. The idea is to carefully shepherd a new release into each new version while maintaining integrity and stability. No matter how bad a bug is, introducing a fix that simply

I agree with how you think bugs should be reported. For now, I'd suggest posting them here, in detail. Some of us can relay them to the appropriate places, at least until we hear from Adobe personnel about an official location or method for the average end user.
Lee Jay

My system crashed...if I post my report, can someone tell me what happened?

My relatively new 2010 MBP 15" 2.66 i7 8GB RAM w/ the anti-glare screen (trying to include all the info, just in case) crashed. First, it wouldn't wake from sleep. That happens from time to time, sure. But this time, it didn't even sleep when I closed it. I didn't notice and slipped it into my bag, taking it with me to class. When I got to my class to take out my machine, I unzipped it and felt a ton of heat rush out, noticing the fans on the computer were running at full power. My MBP was HOT! I held the power button to shut it off (just instinct, don't know if that'd help anything) and let it cool. I started it up a few minutes later, and here I am writing this.
I've been having issues with flash videos... On any site, the videos sometimes pause as the audio plays normally (artifacts show at the top 1/8 of the video portion of the screen). Also, when in full screen, the video sometimes plays at a seemingly slower frame rate (maybe 10fps or so, so it's definitely choppy), again while the sound continues normally. Don't know if this has anything to do with the issue, but it's been annoying, to say the least (especially considering the over-$3000 I put into this thing...not that I'm complaining about the price for an MBP, I love it despite these issues...).
Finally, the system has been a bit slower overall. As far as maintenance, I'm pretty anal. I run MacScan and MacKeeper once a day at least. I have onyx and check for file permissions within Onyx and Disk Utility, etc., on occasion, and did so just a few days ago. My hard drive is 500GB with just over 100GB free...
ALSO: I had been having an issue a couple weeks ago where my computer would freeze every 30 seconds or so for about 5 seconds, and then resume again as though nothing was wrong, and then repeat... Restarting didn't help, so I repaired permissions, and things seemed to be fixed (although my MS Office programs wouldn't work...all my programs are legit, by the way...so don't know what was up with that...but a reinstall fixed the issues).
I've had a **** of a couple weeks with this computer, but I'm determined to keep it running (and my pocket full, hopefully). Any chance that someone can help me with what may be going on? I do have AppleCare, but I thought this might be easier than going to the store to have them tell me everything seems fine and they have no clue what's wrong...
I did a copy of the report once the computer started again after the whole overheating thing...if that actually tells anyone anything. Any help is MUCH APPRECIATED! Thanks in advance!

Tom
Thanks, I switched CuteFtp to binary and that cleared up the problem. You know I was using your post from a previous thread to help me already. I guess I did not read enough.
You are really helping with your posts.
Very much appreciated,
Bill

BW upgrade - pre and post upgrade reports

Hi All
Quick question please.
We plan to upgrade our BW ABAP system from NW 731 SPS7 to NW 740 SPS6.
I read the ASU toolbox note 1000009 and can see that there is no file for our scenario i..e from 73X to 740 so note 1734333 is the way to go here when prompted for ASU toolbox run. However within the note 1734333, it states "This note requires that all pre-requisites for the BW-related system copy automation are met according to note 1707321". When i read 1707321 it talks about installation procedure for PCA which is part of LVM, a licensed software. We don't have this license. Hence I am wondering if note 1707321 is applicable for us at all or is it that this note would bring about changes in the system and sets up a staging area upon which the Z report from the other note(1734333) builds and then creates task list for pre and post upgrade. I am certain that we will have to implement Z report from note 1734333 however the reference to note 1707321 has created some confusion.
Also once we implement the Z report from 1734333, the note says, the report needs not be transferred but the objects generated need to be. Would the author here referring to reports - SAP_BW_BEFORE UPGRADE and SAP_BW_AFTER UPGRADE and having them recorded into a transport. Any thoughts here please. If the author is indeed referring to these reports only, how do we know this will show up in quality systems via STC01 as input options.
Regards
Kalyan

I re-read the note again, It says, If task manager content notes(1707321) are not applied, we will not see reports for stopping RDA Daemons and Process chains i...e report RS_SYSTEM_SHUTDOWN. However we are on NW 731 SP7 so we already have this report. This means we can go ahead with implementing the Z report from 1734333 and forget about the other note. Have I comprehended it correctly
Regards
Kalyan

Reconciliation of MR11 Report - Del/Inv Surplus with GRIR GL A/c

Hi Friends,
Normally there is always a difference between the Delivery and Invoice, i.e. either Delivery Surplus or Invoice Surplus, the report for which we can generate from MR11, using the quantity variance - Less than/Equal to 100%. However, we notice that the total of this report does not match with the net balance in the GR/IR Clearing GL Account, even though use the same date for the movements are used in both the reports. Is there a particular reason for the same? And how can we find out the difference?
Also is there a report that can give us the Supplier Wise - Details of the GR/IR Clearing GL Account?
Thanks in Advance.
Regards

The Report talied after using the correct selection parameters.

Reports are not posting with report repository webserver configured for Sin

Hi Everyone,
We have configured Single Signon on our Test environment (UADB1) using Sun Authentication Manager. Everything went well, we can login using our LDAP accounts except for one thing. The reports are not posting to the report repository.
Our setup goes like this. We have used only one webserver for login and for report repository purposes. SSL certificate was configured in the webserver and we are using https in the report node. Both URLs https://dv001.test.com:8450 and http://dv001.test.com:8400 were configured for Single Signon.
Report Node Definition
Node Name: uadb1
URL: https://dv001.test.com:8450/psreports/uadb1
Connection Information
https
URI Port: 8450
URI Host: dv001.test.com
URI Resource: SchedulerTransfer/uadb1
Below is the error I am getting. If I will use another webserver which is not the Single Signon configured as report repository the reports are posting. So, I am thinking this has something to do with the Single Signon setup and SSL. ANy idea? Thanks.
PSDSTSRV.2093190 (10) [06/13/10 01:05:43 PostReport](3) 1. Process Instance: 9499/Report Id: 8465/Descr: Process Scheduler System Purge
PSDSTSRV.2093190 (10) [06/13/10 01:05:43 PostReport](3) from directory: /psft/pt849/appserv/prcs/UADB1/log_output/AE_PRCSYSPURGE_9499
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) (JNIUTIL): Java exception thrown: java.net.SocketException: Unexpected end of file from server
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](3) HTTP transfer error.
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](3) Post Report Elapsed Time: 0.2300
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) =================================Error===============================
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) Unable to post report/log file for Process Instance: 9499, Report Id: 8465
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Process Name: PRCSYSPURGE, Type: Application Engine
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Description: Process Scheduler System Purge
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Directory: /psft/pt849/appserv/prcs/UADB1/log_output/AE_PRCSYSPURGE_94

Duplicated thread : Reports not posting if using Single Signon webserver as report repo
Nicolas.

Mismatch amount in posting & bank report-Payroll

Dear Team,
We using the tcode Pcoo_m99_ cipe (posting to account: create posting run), in simulation, all the employees have shown green. While match the data pc00_m99_cipe & bank report for salary & wage payable miss match around 4000/- only.
Salary & wage payable is higher than bank report around Rs. 4000/-
Kindly suggest how to find out the difference.
Regards,
Rakesh

Dear Praneeth,
Thank you for your time & cooperation,
In August month you maintained the IT 0015 sty 01 is it deduction wage type ? to deduct the amount which is brought forward from the July month ?
Yes! It is deduction wage type & the same amount entered.
in the august month have done FI postings (pc00_m99_cipe) for this employee or not ?- Yes
In the month of august, we have done the posting, No error found.
new employee confirmation action done in April and salary also increased in IT 0008.
Now the same employee confirmed action process & salary also increased in IT 0008 with effect from April.
i didn't understand the problem mismatch the salary register and posting amount..... please explain with example figures
while cheking the bank report details & FI postings (pc00_m99_cipe) amount are mismatch.
The mismatch amount is the same amount i.e. while analysis found that in FI posting consider the arrear on Basic, HRA, Conv etc. and the amount is same as July.
Regards,
Rakesh

Inventry Posting List Report PLD

Hi Experts,
I am using SAP 2007 B Pl 13 . I am running the report Inventry Posting List. The data comes dailywise total , monthwise total yearly total but in PLD it does not show in this manner. I need the PLD in this format. Please help me.
Thanks and Regards
Piyush

Hi Rahul,
Thanks for reply but what the problem creating is that what i am choosing the option on this report is not showing in PLD as that way.
Thanks and Regards
Piyush

Posting datewise report needed MCE5

Hi
To get the report MCE5 by posting date what table I should refer to create Zreport.
Thanks,
Kiran

What logicshould i tell to abaper.
for example if material no. in mce5 = material no. EKBE then accumulate data in report mce5 report posting datewise for the field menge from EKBE.
is that logic is correct.

ABAP error on posting MR11 entries

Hi,
Tried posting entires in MR11. On pressing icon post clearing gets error message program termination & ABAP error. ABAP error analysis " DIAG1 = MR11 1000 01 02"
Could any one advise what could be reason foir error & how to resolve it

if an ABAP terminates then it creates a huge log that can be analyzed via ST22.
even it is huge, the most important info is at the first 5 pages.
It is usually not a user error when a program terminates. Ask an ABAPer to analyze the dump.

Post MR11 report

Similar Messages

Maybe you are looking for