Powerbook g4 startup and sleep/wake problems

Right, here's my problem: Turning it on.... When it wants to! I press the power button and the white power indicator lights up, and stays lit, fans spin and thats it. Black display and nothing else. No startup chime or anything. (The power indicator should be off
when the machine is on, I know this, but stays lit.) Holding the power button gives a long tone and flashing power indicator and I think then it reboots giving the
startup chime, but again stays on a black screen with nothing else. Removing the battery, (with no power adaptor, holding the power (resetting PMU) then reinserting the battery and giving it a power supply does evenually allow it to boot but I have the same issue with it
every time I put it to sleep or shut it down! I have run the Apple Hardware test numerous times, even the extended test and it passes all tests.
I have tried resetting PRAM, NVRAM, applejack, repairing volumes (no repair required) repairing permissions, but to no avail. I have even installed OS X again using the supplied Apple CDs,
but half way though install (when it restarts) I have the same issue and had to attempt to get it to boot so it could finish the install.
When I eventually get it back on the clock is reset to
January 1970. (I presume this is because I reset the PMU.)
Something is not right somewhere!
RAM installed, 512MB, 80GB HDD, 1.67GHz, 15" high rez, DL super drive.
Nice machine whilst its on, I'm typing on it now. I know for a fact it won't blooming turn back on though without a fight.
Any suggestions? (I am presuming it's either the PRAM battery or something to do with power managment seen as I'm on now, fine with a brand new battery and 65w AC adaptor.)
I have also read that holding down power button on startup makes it give a number of tones, it gives one, which apparently means bad RAM? RAM appears to be fine otherwise it wouldn't be on fine and dandy now?
Strange one this.
Anything at all is most appreciated.
Regards,
Dan

ok there have been some advances.
couple of things;
1) my machine was putting itself in safe sleep (or deep sleep) i have now disabled this so it sleeps normally.
2) lookupd has been hanging. (filtered 'hangup' in console:)
===== Display starts at offset 22077 within file of length 153149. ====
===== Use File->Reload (Cmd-R) to display more. ====
Jan 1 01:00:51 daniels-powerbook58 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[57]: exited abnormally: Hangup
Nov 5 23:59:24 daniels-powerbook58 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[110]: exited abnormally: Hangup
Jan 1 01:00:23 localhost launchd: Server 2947 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[41]: exited abnormally: Hangup
Jan 1 01:00:36 daniels-powerbook58 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[57]: exited abnormally: Hangup
Jan 1 01:00:36 daniels-powerbook58 launchd: Server 3f17 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[102]: exited abnormally: Hangup
Nov 6 00:24:48 daniels-powerbook58 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[103]: exited abnormally: Hangup
Nov 6 00:26:48 daniels-powerbook58 launchd: Server 299b in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[194]: exited abnormally: Hangup
Nov 6 00:58:11 daniels-powerbook58 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[195]: exited abnormally: Hangup
Nov 6 00:58:40 daniels-powerbook58 launchd: Server 3f3f in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[284]: exited abnormally: Hangup
Nov 6 01:01:24 daniels-powerbook58 launchd: Server 3f5f in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[296]: exited abnormally: Hangup
Nov 6 01:03:46 localhost launchd: Server 3137 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[40]: exited abnormally: Hangup
Nov 6 01:03:59 daniels-powerbook58 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[61]: exited abnormally: Hangup
Nov 6 01:05:07 daniels-powerbook58 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[89]: exited abnormally: Hangup
Nov 6 01:06:39 daniels-powerbook58 launchd: Server 4d2f in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[189]: exited abnormally: Hangup
Nov 6 01:40:17 daniels-powerbook58 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[190]: exited abnormally: Hangup
Nov 6 01:45:33 localhost launchd: Server 2313 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[39]: exited abnormally: Hangup
Nov 6 01:45:46 daniels-powerbook58 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[60]: exited abnormally: Hangup
Nov 6 01:45:46 daniels-powerbook58 launchd: Server 430b in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[97]: exited abnormally: Hangup
Nov 6 02:05:21 localhost launchd: Server 2953 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[43]: exited abnormally: Hangup
Nov 6 02:05:34 daniels-powerbook58 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[60]: exited abnormally: Hangup
Nov 6 02:22:29 localhost launchd: Server 293b in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[38]: exited abnormally: Hangup
Nov 6 02:26:26 daniels-powerbook58 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[61]: exited abnormally: Hangup
Nov 6 02:26:26 daniels-powerbook58 launchd: Server 440b in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[146]: exited abnormally: Hangup
Nov 6 02:26:57 daniels-powerbook58 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[148]: exited abnormally: Hangup
Nov 6 02:27:02 daniels-powerbook58 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[164]: exited abnormally: Hangup
Nov 6 02:29:15 localhost launchd: Server 294f in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[43]: exited abnormally: Hangup
Nov 6 02:29:28 daniels-powerbook58 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[59]: exited abnormally: Hangup
Nov 6 02:55:44 daniels-powerbook58 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[122]: exited abnormally: Hangup
Nov 6 02:56:58 daniels-powerbook58 launchd: Server 3e3b in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[231]: exited abnormally: Hangup
Nov 6 02:57:27 daniels-powerbook58 launchd: Server 3e3f in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[234]: exited abnormally: Hangup
Nov 6 03:09:15 daniels-powerbook58 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[236]: exited abnormally: Hangup
Nov 6 13:22:56 daniels-powerbook58 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[254]: exited abnormally: Hangup
Nov 6 13:26:53 localhost launchd: Server 294f in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[43]: exited abnormally: Hangup
Nov 6 13:27:06 daniels-powerbook58 launchd: Server 3f0f in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[97]: exited abnormally: Hangup
Nov 6 13:37:10 daniels-powerbook58 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[100]: exited abnormally: Hangup
Nov 6 13:38:19 daniels-powerbook58 launchd: Server 29af in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[193]: exited abnormally: Hangup
Nov 6 13:50:04 daniels-powerbook58 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[195]: exited abnormally: Hangup
Nov 6 13:50:04 daniels-powerbook58 launchd: Server 3f1f in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[206]: exited abnormally: Hangup
Nov 6 15:34:02 localhost launchd: Server 291b in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[68]: exited abnormally: Hangup
Nov 6 15:34:17 daniels-powerbook58 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[88]: exited abnormally: Hangup
Nov 6 15:42:02 daniels-powerbook58 launchd: Server 420b in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[94]: exited abnormally: Hangup
Nov 6 15:42:47 localhost launchd: Server 3137 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[42]: exited abnormally: Hangup
Nov 6 15:45:34 localhost launchd: Server 3137 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[42]: exited abnormally: Hangup
Nov 6 15:45:48 daniels-powerbook58 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[59]: exited abnormally: Hangup
Nov 6 15:48:55 daniels-powerbook58 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[92]: exited abnormally: Hangup
Nov 6 16:14:59 localhost launchd: Server 331f in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[72]: exited abnormally: Hangup
Nov 6 16:23:06 localhost launchd: Server 330f in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[43]: exited abnormally: Hangup
Nov 6 16:25:16 daniels-powerbook58 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[114]: exited abnormally: Hangup
Nov 6 16:25:22 daniels-powerbook58 launchd: Server 335f in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[194]: exited abnormally: Hangup
Nov 6 16:32:04 localhost launchd: Server 3307 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[43]: exited abnormally: Hangup
Nov 6 16:32:18 daniels-powerbook58 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[60]: exited abnormally: Hangup
Nov 6 16:47:33 daniels-powerbook58 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[192]: exited abnormally: Hangup
i think its got its knickers in a twist... this is with 10.4.2 (after i reinstalled os x). i then updated to 10.4.10 with the combo download after a fsck -fy, reset of pmu, nvram, and repairing of permissions. Now the hanging of lookupd seems to have stopped. well, at least now the process restarts if it does hang straight away, but it hasnt appeared for a while in the logs.
fingers crossed.
this make sense to everyone?

Similar Messages

  • SLEEP/WAKE PROBLEM on my Macbook Pro 2.33GHz Intel Core 2 Duo

    Greetings!
    I love APPLE. So APPLE, please do try to help me out here...
    The first problem I encountered was a faded translucent bluish/grayish rectangular line stretching from top to bottom suddenly showing up. I've shown this to our local APPLE technician and my LCD was replaced. Nice job here APPLE!
    Now for the latest problem occurring as I'm writing this post. When I have my laptop fall into sleep, for say at least 5 minutes, and attempt to wake it up.. the user interface doesn't show up. The screen remains black and that pressing any key on the keyboard or clicking the mouse will automatically restart the laptop always (I do hope my internal hard disk won't be damaged from this reoccurring dilemma of mine). I've observed that this current problem started after my LCD was replaced.
    Does anybody have the same problem as I have? If so, please do give me possible solutions for this? I've already talked with our local APPLE technician and told me that there might be some problems with the motherboard inside that may opening the laptop might be necessary.
    Still... No worries APPLE (as of yet), I still love it even though it's my first time using such a wonderful invention of technology.
    Fathom Graphis

    Hi. This is Fathom Graphis again.
    Reading one of the threads that mentions an individual asking for help from an Apple certified technician with a problem that's quite the same as mine, I followed the instructions given by this Apple technician that there may be an application or some device activated in the "SHARING" folder (under *System Preferences*) that's causing the problem of the laptop not waking up and requiring hard reset to get back to the Mac OSX user interface.
    So, I checked my sharing folder and found that my *"PERSONAL WEB SHARING"* option is activated (Under the SERVICES menu). I deactivated (unchecked) it and tested my laptop sleeping function by shifting the PUT THE COMPUTER TO SLEEP arrow to 1 minute and letting the laptop sleep for 10 minutes. After which, I moved the mouse and the MAC OSX User Interface came abruptly and the laptop didn't restart. I tested it again by letting it sleep for another 10 minutes and waking it up through mouse click and the MAC OSX User Interface showed up abruptly and the laptop, again, restarted.
    So far, I'm still putting my laptop under observation. But I just want to inform everybody with their supposed respective SLEEP/WAKE problems on their Macbook pros (or Macbooks) that this may solve their issues (though I provide no guarantees, okay? I'm just a common user who happen to find a solution accidentally).
    Still I want to address APPLE that certainly, letting your laptop sleep and waking it up and restarting itself after with the Personal Web Sharing activated (or checked under System Preferences > Sharing > Services) is indeed a "bug" that needs to be fixed. So hopefully, the people at APPLE would try to resolve such an issue as soon as possible (because, to my knowledge, sudden restarts of Hard Disks may cause data damages). God Bless You All.
    Fathom Graphis

  • Ipod touch 4th gen needed a new screen and sleep/wake switch.  So, I replace them.  I was able to get to settings and do "erase all content and settings".  I am not able to totally shut this device off as it keeps restarting after a few seconds.

    Ipod touch 4th gen needed a new screen and sleep/wake switch.  So, I replace them.  I was able to get to settings and do "erase all content and settings".  I am not able to totally shut this device off as it keeps restarting after a few seconds.  I have used itunes to restore and also recover.  Device will actually shut off and stay shut off if I leave it connected to the computer.  The moment I unplug (3 seconds) the apple logo appears, it boots, unlock screen appears, I can unlock and operate normally, unplugged or not.  Just cant get it to completely shut down unplugged.  Any thoughts?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
      - If still not successful that usually indicates a hardware problem. Maybe you installed a bad component or damaged something during the repair/replacement.
    Apple will not help since you worked on the iPod yourself.

  • Macbook Pro Retina (late 2013) sleep wake problems under Yosemite

    Hi,
    Ever since I installed Yosemite on my MBP (details in the screen shot below), I've been getting Sleep Wake problems.  At night, I simply close the lid of the laptop, leaving all applications running, and in the morning I wake it up.  This worked fine under Mavericks on this laptop, but since Yosemite, every time I open the lid, I've had problems.  Initially, I'd open the lid and the machine would restore from what looked like a deep sleep (screen would get an alpha layer on it, and the little progress bar would appear, as though it's waking from the battery running out).  I ran Disk Utility, which found and repaired an issue on the disk (can't remember the details, unfortunately), and ever since then, when I open the lid, I have to hit the power button to get the machine going.  It restores in about 15 seconds (nice and fast), and it does re-launch all of the applications I had open, but the machine will also show a little system alert, indicating a "Sleep Wake Problem".  Each time I see it, I submit the issue to Apple.  Because I'm an idiot, I forgot to copy the crash log from this morning, but I'll do that tomorrow and append it to this thread.  Meanwhile, if anybody is having a similar experience and can isolate the cause, I'd love to know.  A few variables which might matter:
    * I have a Thunderbolt external hard drive which I use for Time Machine.  Each night, I eject the disk before shutting the laptop down (I bring the machine home with me each night).  My laptop used to have issues ejecting external disks, which I traced (thanks to this board) to an issue with attempting to put an external drive to sleep (I think that was the issue).  I haven't had any issues since that time.
    * The apps I have running all the time are Mail, Safari, Coda (text editor) and VMWare 8, which is running a Windows7 VM.  That's been my environment for years now, yet the sleep-wake issue only started since upgrading to Yosemite.
    Any help/advice is appreciated.
    Thanks!

    Hi Ben,
    Another sleep issue and adding to your post... My MacBook Pro (2.7ghz early 2011)
    Leaving apps open and closing the "lid" and then going to bed... several times thru out the night my MacBook will start to wake up.  The optical drive spins up (DVD is in the drive), the hard drive fires up, I think i can see the screen glow ("lid" is still closed).   Then it sets itself back to sleep (must detect the closed lid).
    Did not do this with Mavericks or other earlier OSs. 
    I have not begun to try to figure this out... today is the day!  lol. 

  • My iphone is showing the apple pic so i Pressed both home and sleep/wake buttons until the Apple logo appears, then release the sleep/wake button and continue pressing the home button alone until iTunes detects and Recoveys but it is gives an error 1051

    my phone was showing the apple pic when i eraseed all content and settings so i did Pressed both home and sleep/wake buttons until the Apple logo appeared, then released the sleep/wake button and continued pressing the home button alone until iTunes detected the phone in Recovery Mode but an error is coming (1015) plz help me!!!!

    plug into itunes and take it from there
    http://support.apple.com/kb/HT1808

  • Iphone 5 froxen on home screen, wont let me swipe.  tried home and sleep/wake botton to no avail still locked.  went to restore using itunes but dont want to loose photos on phone.  can anyone suggest a way to get photos before i restore

    iphone 5 frozen on home screen, wont let me swipe.  tried home and sleep/wake botton to no avail still locked.  went to restore using itunes but dont want to loose photos on phone.  can anyone suggest a way to get photos before i restore

    try moisturising your finger a bit if the skin is too dry it can give problems

  • Where do I find the 'home' and 'sleep/wake' buttons on my iPad?

    One user suggested I reboot my iPad by holding down the HOME and SLEEP/WAKE buttons at the same time. Where do I fine the home and sleep/wake buttons?  I am new to apple. Thank you.

    The home button is the button on the front of the iPad below the screen, the sleep/wake button is on the top edge of the iPad

  • HT1430 My phone locked up during sync to I tunes,   Power button and sleep/wake don't work

    My  phone locked up during sync to I tunes,  Power button and sleep/wake don't work.

    We here http://support.apple.com/kb/HT1808 and here http://support.apple.com/kb/ht4097

  • What will i do with my ipad stuck on white apple logo and itunes not recognized it. i'll always try to press and hold both the home botton and sleep/wake button but nothings happen.

    what will i do with my ipad 2 ios 5.0.1 stuck on white apple logo and itunes not recognized it. i'll always try to press and hold both the home botton and sleep/wake button but nothings happen.

    if that dose not work then you can always put it into DFU mode by connecting to your computer and holding down the home button and sleep/wake button for excatly 10 seconds and then relesing the sleep/wake button and keep holding down the homebutton till iTunes tells you it has detected an iPad in recovery mode then just do a restore

  • Could AirPort Extreme be causing my Sleep/Wake problem?

    I had not been able to wake my iMac G5 from sleep when touching the keyboard. Apple Genius determined there was no problem with the computer, so suggested I unplug all peripherals to try and isolate cause.
    When I unplugged the ethernet cable from the Mac, the problem seemed to be fixed. (All other attachments did not affect problem.) I now have just the modem plugged into the Mac, and will see how the sleep/wake cycle responds.
    But I'm wondering, has anyone else had a problem with the Extreme causing a power problem?
    Thanks

    Never mind above as problem has also occurred with just the modem plugged in. Extreme is not the culprit. Still unclear as to what is causing it.

  • Home and sleep/wake button doesn't work

    my ipod touch 5th gen's home button doesn't work and I've tried the accesive but it still wont lead to the home screen... even the off/sleep/wake button doesnt work... I've just had this gadget last May 2 of this year... What will I do?

    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          
    Also are you saying the the Accessibility feature Assistive Touch does not work?

  • Ipod sleep/wake problem

    Hi There
    i bought an2nd gen ipod second hand the lcd was cracked so opened it up to fix it done that then found out the sleep/wake button did not work so bought a new button flex but still did not work.
    So i had a good look around and found a split on the wifi flex the bit that connects to the sleep flex so i have replaced the wifi flex to and it charges and starts up fine but the sleep/wake button still does not work.
    So could it be any thing else?
    thanks

    Most likely the problem is with your software. Just turn it on and restore it through iTunes if you haven't done so already. If that doesn't work, all I can say is to wait until the next version of 2.x.x comes out and see if problems persist. If they do, then you should probably call Apple and let them know.

  • I phone 4s frozen with a pic of USB and I tunes logo will not reset by holding home and sleep wake buttons

    I phone 4s frozen with a pic of USB and itunes logo on screen will not reset by holding sleep/wake buttons and home button at same time

    It is plugged into computer and itunes is not showing that my phone is connected. Apple gave me a website address to fix the problem but it must have not been the correct web address. I'm outside of 90 day window for phone support.

  • Ipad dipped in water and sleep/wake button not working properly?

    My son dipped my ipad 2 in the water bucket for like half a second the ipad,before this ipad was out of battery and was off! i quickly took it out dried all the excess water and even used a blow dryer to dry it,after a quick dry i tried to swtich it on and everything is working okay till now except the wake/sleep button,its not locking the screen or not switching off the ipad. it did turned it on but its not locking the screen or turning off the ipad!
    when i tried reseting it from the general menu in settings it turned off and then the apple logo kept on coming for like 5 seconds and then going away this keeps on happening till i dont keep a hold off the sleep/wake button to switch it on or till the ipad runs out of battery,then if i hold the wake/sleep button to turns it.
    One more problem im facing as soon as the ipad turned.it gives me power off option everytime then iv to cancel it to use my ipad.
    so the main question is my sleep and wake button is turning on my device but not working while its on,what would be the problem and whats the solution?
    p.s. i was tensed about it so i quickly turned it on to check whether its working,i know i shouldnt had turned it on :/
    currently my ipad is off and iv put it under a fan to dry,thinking this might might help but im feeling it wont now its too late:(

    Hello:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    That resets the iPad.  If that does not work, I am afraid it has been damaged by the "water dip." 
    Barry

  • HT1430 i have tried pushing and holding both home and sleep/wake button to restart my iphone and it is still not responding

    My iphone 4 has just stopped working after plugging it in to charge...
    I have tried resetting the phone by holding down the sleep/wake and home buttons but nothing is happening... Help!

    http://support.apple.com/kb/TS3281

Maybe you are looking for

  • Mutiple Excise invoice for single GR document

    Hi, How to handle If the vendor send a multiple excise invoice for the single delivery ? Now My client is having this problem 1. The material doument " X" contains 10 items and part 1 also captured at the time GR 2. Vendor send Two excise invoice (On

  • Where to find Power Adapter for iBook - 65W Model A1021?

    Does anyone know where I can find a new power adapter for an older iBook? Details: Apple 65W Portable Power Adapter Model No. A1021 Cord seems to be fine, just need the brick. Thank you!! Teresa

  • Dummy PC in new GL

    Hi Friends, We have document splitting on Profit center level,still somehow,the dummy PC had been configured and consequently,a few entries had been posted to dummy PC ,since the Cost center master did not have a PC. How to remove the dummy PC settin

  • Moved to ixwebhosting and none of my links work. Not Impressed!

    I moved over to ixwebhosting and the transition was easy but now all the links I've spent planting around the world are sent to another site. Not impressed! Unless one types in the url into the browser one get transported to generic sites that use si

  • Bug in Presentation services - using cookies for GET requests

    Hi, I am implementing OBIEE bridge to integrate report in to 3rd party web applications. I am creating page using the following syntax: *string pageId = htmlViewService.startPage(new StartPageParams() { dontUseHttpCookies = true }, sessionId);* Even