HT1430 i have tried pushing and holding both home and sleep/wake button to restart my iphone and it is still not responding
My iphone 4 has just stopped working after plugging it in to charge...
I have tried resetting the phone by holding down the sleep/wake and home buttons but nothing is happening... Help!
http://support.apple.com/kb/TS3281
Similar Messages
-
It's disabled and tells me to connect to iTunes. But when I do that, iTunes wont detect the iPod.I have put the iPod in USB- mode, and by that I mean I have tried connecting with holding the home button when connecting the USB. Help?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
I have to restore my iphone 4s becasue it is saying "disabled connect to itunes" and it's never been synced with itunes. However the sleep/wake button is broken on the phone is there still away to restore without using it?
You can try, but the problem with that is you need battery power in order to restore. Once your phone has enough power to restore, it will still show the same message. To get the phone into either recovery mode or DFU mode requires the ability to first turn the phone off. But, you've got nothing to lose, so you might as well give it a shot.
-
HT1430 I am unable to reset my phone as the sleep/wake button does not work????
My sleep/wake button has stopped working. I have checked the support site and it states to reset but I can't as the button does not operate. Do I need my phone repaired?
Yes. If something is broken, you generally have to get it fixed before it will work again.
-
My mac and pc both died. How do sync music from our iphone and 3 ipods onto a new pc?
A year ago my MAC just up and died.I have all the music that was on that mac on my iphone.
We couldn't buy a new mac, so we started using an old pc. My kids built a large itunes library on that computer which now has died.
We have another new pc. How do we combine all the music on 1 iphone (last syched for music on a mac) and 3 ipods (last synch on a different pc) onto this new computer?
When I want to sync,it wants to erase what is on my phone!
Help!Apps are 'registered' to a particular account so if they won't transfer this is suggestive of them being downloaded to the phone from another account.
If you are 100% sure they were bought on the relevant account active on iTunes and the iPhone (check in the account purchase history) then you can download them again for free.
If you get charged again, then its fairly certain that they were not bought on that account. -
HT1430 I held the sleep/wake button for a full minute, and only the Power Off slide appeared.
I cannot access the power off slide because there is a pop-up message saying "Cannot connect to iTunes store" to which I cannot select the OK button. How else can I power off the iPad2?
Try a reset: Simultaneously hold down the Home and the On button until the iPad shuts down. If the Off slider appears, ignore it. This should take about ten seconds, give or take. Once the shut down completes, use the On button to restart.
-
HT1430 How do you turn off your phone if the sleep/wake button doesn't work anymore?
How do you turn off your phone if your sleep/wake button doesn't work anymore?
If a reset doesnt fix it (which it wont - that is likely a hardware issue), then get warranty service.
http://www.apple.com/support/contact/
1-800-MY-APPLE (1-800-692-7753) -
what will i do with my ipad 2 ios 5.0.1 stuck on white apple logo and itunes not recognized it. i'll always try to press and hold both the home botton and sleep/wake button but nothings happen.
if that dose not work then you can always put it into DFU mode by connecting to your computer and holding down the home button and sleep/wake button for excatly 10 seconds and then relesing the sleep/wake button and keep holding down the homebutton till iTunes tells you it has detected an iPad in recovery mode then just do a restore
-
My ipad 2 is wont turn on. I held the sleep/wake button down for 15 seconds and the battery image shows up for a second then the screen goes blank. Help!
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
The i pod is disabled I cant conect to i tunes because it says to enter password. I have followed the steps to try a hard reset by holding down just the sleep/wake button or that and home button till the slidder bar showes which is not happening it has the lock symbol in the middle top screen of the red bar so i cant even get it to unlock.... any suggestions on how to shut this thing off so i can get it into recovery mode to reset it?
Try placing the iPod in ecovery mode and then restoring the iPod via iTunes. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
Next would beto wait for the battery to fully drain and the charge and try again. -
I have a iphone3GS. It could not be boot up. When i press the sleep/wake button, the apple logo appear and then disappear. The password login screen didnt' come on. When i tried to connect my phone to the itune on my laptop, there isnt this button that i can sync my phone with the laptop.
Sounds like your iPhones software may be corrupt. Try placing the iPhone into recovery mode. To do this, follow the steps in this article:
http://support.apple.com/kb/HT1808
Hope this helps
- Greg -
IPod touch problems grey pixels and stuck sleep/wake button
I got my iPod touch 2g in January of this year and I noticed that my sleep wake button was inside the iPod not sticking out like it is suppose to and I also saw that I have about 15 rows of greyed out pixels. I'm wondering if my warranty can fix both of these problems for free or do I need to pay money. I have tried the stuck pixel fix but nothing happened.
Did you try to restore in iTunes?
iPhone and iPod touch: Frozen and unresponsive -
I have downloaded an app which I think is to large as it has jammed. The icon just reads loading. How can I stop it and clear it from my pad????
Have you tried a reset to see if it resumes after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
My iphone is stuck on the itune screen. I have tried pushing the on/off and bottom buttons and the phone will turn off but come right back to the itune screen I also tried plugging my iphone into my computer and holding down the bottom button to see if i could get to the restore screen. Nothing, just the itune screen. Any ideas what to do to fix my phone?
Please read this article if you are unable to restore your device using typical process:
http://support.apple.com/kb/HT1808
good luck. -
I tried updating iphone 6 to 8.1.3 But the phone went dead. I have tried using restore options - both update and erase, but the process stops when it tries to update Iphone firmware.
Put your phone in DFU mode,
Hold the Power Button (3 secs)
Continue holding the power button and also hold the home button (15 secs)
Release the power button while continuing to hold the home button (10 secs)
Your device should prompt with the "Connect to iTunes Screen"
Restore.
Maybe you are looking for
-
How to get paired Auvio wireless speakers to connect and play on 2008 Macbook Pro
How do I get wireless speakers to play after successfully paired in system preferences of 2008 macbook pro? When both turned on they will not connect.
-
SPF outputs different between 7.2.379.0 for R2 and 7.2.1902
We have customer deployments with Windows Server 2012 R2, SCVMM 2012 R2 and SPF. We are finding the query outputs are corrupted in latest SPF version 7.2.1902. We were earlier using 7.2.379.0 and the VM name returned by query was correct. But now the
-
I like iweb.... Is there a way to use the styles outside the program? Let's say I have a picture, when I publish the picture in iWeb on a photo page I can choose a style I want. But I also want to print that picture....with that style. Can I export t
-
CCMs alerting if MAXDB Backup fails
Hi, I want to see an red alert in CCMS (rz20, Method SDB_health_verify_rc_smcl_<SID>, ..Last Check Return Code) if the last return code of the backup is unequal 0. Does anyone have an idea how to custmize rz20 to do this ? If I put the MTE default se
-
Use of Source Language in Worklist Translation
Hi All, Can any one explain what is the purpose of providing the Source Language and how it is different from language provided during the creation of the iView? Thanks, Reetika