PPM 5.0: Assign cProjects New Status to Project Mngt business transaction?

hello Experts,
In SPRO -> Project Management -> Basic settings -> Create/Change Status Profile for User Status, I created my own status profile and assigned them to object types.
Now, for status synchronisation, i need to map Project / Initiative Business Transaction to DFM Business Transaction
( SPRO -> Portfolio and Project Management -> Portfolio Management ->Base System Interfaces -> Decision Flow Management Settings -> Status Synchronization -> Map Project / Initiative Business Transaction to DFM Business Transaction)
My question is : 
How can I create my own Project Management business transactions?
if is not possible, how can i assign the standard ones (DX01, DX02, etc) to my own status (ZST1, ZST2, etc) ?
Thank you in advance,
Amal

Hello,
Check the trasnaction BS32 for adding new business transactions.
Cheers
Amit

Similar Messages

  • How to insert a new customized user status in an existing business transaction?

    Hi Gurus:
    We have a service request where we need a new user status, but I have in a productive system service requests created already.
    We customized the new user status for the transaction type that we are using, but how to retrieve in the old business transactions created this new user status?
    Is there a way to insert the new customizing in old transactions? Is possible to force by some ABAP code to insert the new user status in some old business transactions?
    I'll appreciate your inputs.
    Susana

    Hi Susana,
    Can you try the report of note
    1289525
    If this is not working may be you can use partaily the code of the report .
    Best regards
    Christophe

  • Order Status Report (by CO Business Transaction

    Hi All,
    At present, we are using standard IO Reports that give output of all the Orders (even closed ones). User wants a Report that gives output (or in other words they can select) by "status" of the order (e.g. they don't want to see whatever happended in closed orders).
    I think it will be done by copy and then modify SAP standard report. Would you please suggest which field/table is used and how to go about it.
    I know brought "Business Transaction" in General Data selection and created/applied a variable as ZVRNGR, but, can not proceed further as it does not select BFRE/BTAB or BABS..
    In the maintenance of Number Range Interval for Controlling Documents, I do not see / can't select the elements BFRE (Released), BTAB (Technically Complete) or BABS (Closed). I think these ionle
    Would anyone of you please explain the solution, with step-wise details.
    Thanks in advance.
    SB

    Thanks Sree.
    The problem is that in Report Painter's Library, view CCSS is being used and option sare limited to the fields.
    One of the fields is CO Business Transaction, but, here it does not work when I select (BFRE, BTAB or BABS) for Sattus of the Order. And these 4-digit IDs are also not there in config under KANK.
    Does it make any sense to you (or anyone else). I know one guy, Hein who has the idea about it.
    For WBS, are you having report in Report Painter or is it ABAP?
    Thanks again,
    SB

  • Assign a New Report Painter Layout to a Transactions

    Dear all.
        I have created a New Layout ZPT-ACTIV-01 by copy the Layout 0PT-ACTIV-01.
        I need to created a new transaction. I Copy the transaction S_ALR_87012258 to ZS_ALR_87012258. Because a create a new Layout ZPT-ACTIV-01 e need to change the Default Value
    D_SREPOVARI-EXTDREPORT = FBR 01RFRRS02 ZPT-ACTIV-01                .
    But When i'm saving the transaction the following erro message appears "Do not use blank characters"
    Best Regards
    Thanks In Advanced
    Pedro Miguel Rodrigues

    No, i don't have any aditional Space.
    But, i think that this problem is only occurs in my SAP Version ECC 5.0.
    Best Regards
    Thanks in advanced
    Pedro Miguel Rodrigues
    This problem was solved by implementing the OSS Note 871039
    Message was edited by: Pedro Rodrigues

  • New Cubes in Project System Business Content

    Hi
    I am going through the business Content Help. We have standard Cubes like 0PS_C02 for dates 0PS_C04 for Controlling, 0PS_C07 for Claims and so on
    Also I see new cubes 0PS_C021 with different description Dates ( Identification using GUID) and 0PS_C041 FOR Controlling (Identification using GUID) and so on.
    My question is what for these new cubes with Description Identification using GUID.
    Thanks
    Satish

    Hi Satish,
        I believe the 0PS_C041 , 0PS_C021 are the used when you create projects in R/3 using cProjects or xRPM. When you create a project in cProjects and replicate it, a corresponding project is created in R/3 which is identified by a 24 character String(this is the GUID). And the cubes 0PS_C041, 0PS_C021 in BW.... are used to store such projects information.
    Hope this helps!!!
    Rajesh.

  • Status Profile: Business Transaction Control Config (OK02)

    Hi All,
    I would need to know the use of the options 'no actions', 'set' and 'delete' under the Business transaction control in Status Profile (User Status)  --> you will need to double click on each of the statuses to view the Business Transaction Control - they are the last 3 columns.  Please provide specific example as well. 
    Also, could you help to advise the relevance of the 'lowest' and 'highest' columns in the initial screen?  Please also advise the relevance of position and priority as well. 
    I am really having difficulty understanding the definition from SAP for both items.
    Thanks!
    Vivian

    Hi VP,
    Thanks for your reply.  Just a little clarifications.
    Yes, the transaction code is OK02, sorry for the typo.  For the 'Set' User Status, if below is my actual config:
    OK02:
    Status 10 - IDEN
                                     Influence               Next Action     
    Bus Trans               No Influence        Allowed      Warning     Forbidden      No Action     Set Status       Delete Status
    Complete                                          X                                                             X
    Confirm WBS                                    X                                             X                 
    Confirm order                                    X                                                             X
    Lock                                                X                                                             X
    Lock assignment                              X                                                             X
    Lock budgeting                                X                                                              X
    Lock dates                                      X                                                              X
    --> now let's say the WBS is currently set as status 10 IDEN.
    a). if someone suddenly do 'complete' (this is not a system status right?). as it is indicated as 'Set Status', what status will be set? user status or system status? What will be the value for the status to be set?
    a). if someone suddenly do 'confirm WBS' (not a system status right?). as it is indicated as 'Set Status', what status will be set? user status or system status? What will be the value for the status to be set?
    Also, may I know where I can see list of system status?System status cannot be defined / added by user right?
    Vivian

  • CProjects- Customizing New Status in "Change Status"

    I need to customize new status in "Change Status" drop down of cProjects tool. Now the status available are "Created, Released, Locked etc" as we all know. But i need to customize my own status for "Projects Phases and Tasks" I create. Can i do that. Please help me on the same. It is urgent.
    Edited by: Visvesh Ramanathan on Jan 10, 2008 4:00 PM

    Hi
    As Vivek already explained, you can have user status in bs02
    now here you can maintain the status as one maintains in R/3 or ECC
    create an auth Key in BS52 for status which needs approval
    maintain the same auth key in bs02 against status
    what you have to do is create a role using pfcg and assign that key in that role
    assign the role to user which ll approve the status to next status.
    Select object type which will give you the applicability of status profile.
    e.g the status profile is to be used for project / task / checklist etc etc...
    The user statusses are visible once you select the status in 3rd tab of project
    Niranjan
    Award points if useful

  • How to add a new status to the Status drop down menu in CRM

    Hi All,
    Help me guyz i am new to CRM,
    i have to add a new status to the Status drop down menu in CRM Sales Area.
    Please help me for steps.
    Thanks
    DST

    Hi,
    You can add New status to the Drop Down menu by defining a catalog,codegroups & code group profiles to that...... Once assigned assign them to the Subject profiles and assign this subject profile to the transaction type that is assigned.
    This would populate all the profiles that u have mentioned in the subject profile.
    Award points if this answer helps you.
    Regards,
    Ravi

  • Solution Manager 7.1 IT Service Management: IRT, MPT new status

    Hello everyone,
    I am wondering, if  in SAP Solution Manager 7.1 IT Service Management I can customize new status into SLA measurement, for example 'Customer action' duration time at Web browser (similiar fuctionality as IRT(The initial response time) and MPT(maximum processing time)).[IRT & MPT|http://pokazywarka.pl/ysrkhe/]
    Equally, new SLA status should be calculating duration for the other incident status for example "In process". If anyone has idea, please advice.
    Best regards,
    SAPFan
    Edited by: SAPFan on Feb 6, 2012 10:48 PM

    Hi,
    Under the System Prepration section I have 2 questions I need additional clarification:
    1. Under 6.2 Prepare Outside Discovery -> Establish trusted connection-> /usr/sap/hostctrl/exe/host_profile of solution manager server:
    a. I added service/admin_users = daaadm. Am I suppose to include the password? what should the formate be?
    What you have entered is fine. Would not need to provide the password as well. Check the External discovery troubleshooting guide sections.
    https://websmp207.sap-ag.de/~sapidb/011000358700000486362011E
    2. Under 6.3 Connect Diagnostic Agent -> ran the following command on my ECC server:
    ./smdsetup.sh managingconf hostname:"solutionmanager.FQN" port:"50004" user:"ddaadm" pwd:"password1"
    a. Is the user/password referring to SolutionManager admin account?
    b. How do I check if it's running correctly?
    c. How to get my solution manager to see my Ecc server's diag agent?
    The user password should be a Solution Manager Java user like SMD_ADMIN or J2EE_ADMIN
    How to check for diagonstic agents, again check the trouble shooting guide referred above.
    I checked the following:
    Start Visual Administrator and navigate to: Server node -> Services -> Security Provider. Please also make sure that the MBeanAdmin is mapped to the Administrators Security role on both: com.adobe/AdobeDocumentServicesADS-EJB and com.adobe/DocumentServicesLicenseManagerADS-License
    I don't see the Adminstrator role to add to the above. Am I suppose to just enter "administrator"?
    Yes, just add the role "Administrators"
    2. Solution Manager Internal Connection -> Setup DPC/DCC Web Service URL
    a. I'm supposed do the following: You have started the Agent Administration:
    b. How do I start the Agent Administration?
    Make sure you have the role SAP_SMWORK_DIAG assigned to your user ID via SU01. Then call solution_manager tcode and goto the RCA tab. Agent Administration link should be available.
    Regards,
    Srikishan

  • User status Profiles - Add new status

    Hi Experts,
    We're working in cProjects 4.0, and we want to customize the status profile for some objects in the project, trying to add a new status "in evaluation" between standard status "release" and "completed".
    It is very important that you <b>cannot change to this status unless the item is released</b>. And we want to define that you can come back to the status only from defined statuses.
    We tried to define that under customizing point "Create/Change User Status Profile" but we don't get to have the discrimination criteria just mentioned above.
    Any help/hints on this?
    Thanks in advance!!
    Kind Regards,
    Isabel

    Isabel,
       You should be able to accomplish this by setting them as below. You could set up the influence like the below  
    Created /initial - System status REL Disallowed
    Released/Initial - System status Completed Disallowed
    Released /inEvaluation - System status Completed Disallowed
    Completed /InEvaluation - System status Completed allowed or No restriction
      and set the Next action to No action.
       By setting them as above When you are in create system status, you can only have the created/Initial User status active. In order to release the object the user will have to propogate to the Released /initial user status .
      After the system status Release has been set, depending on the completion of your activity you can set the released/inevaluation user status.Only after you set this status can set the system status to complete.
      Hope this helps.
    Thanks
    Narasimhan

  • E-recruiting new status to candidate

    Hi all,
    I need to find a way to identify a candidate on hold. I think about creating new status "On hold" but I can't find where to do it in the IMG and I'm not sure it is recommended. Does anyone have another idea about how to represent a candidate who is "On hold" ?
    Thanks,
    Sharon

    Dear Sharona,
    As Venki is suggesting, Please create an activity against object NA (candidate) instead of object NE.
    Create a Z activity.
    Map it to an existing process or create a new process
    Assign this process to Recruitment(Specify the process as TRM instead of candidate shortlist)
    Assign this activity to Object NA.
    This Z activity can then be used in Talent relationship management where you can search for relevant candidates & perform this activity on them. This will ensure that you can perform this activity on all the candidates available in the Talent pool & is not dependent on a requisition.
    In the system there are a lot of activities available for TRM. Example: Release or locking of a profile.
    Regards,
    Sowmya

  • Add new status values to "documentation tab" in solar02

    HI,
    I want to add new status values for the documentation tab in solar02.
    can anyone tell me the process for the same?
    thanks,
    basis admin

    Hi,
    If you're reffering to the documents status you can define custom ones at:
    Transaction SPRO
      button "SAP Reference IMG"
        Navigate through:
    -SAP Solution Manager Implementation Guide
      -SAP Solution Manager
        -Cross-Scenario Settings
          -Document Management
            -Status for Documents
    options:
    *Define Status Values for Documents
    *Assign Status Values for Read Authorization
    *Define Document Status Schemes
    *Assign Status Scheme to Documentation Type
    Please read these Steps and you'll be able to configure these status.
    Kind regards,
    Fabricius

  • How do I assign a new Apple ID to iPhoto?

    It all began back in 2010 when I bought a used PowerMac G5 to see how I got along with MacOS. When I got it, the OS was already set up, along with a few Apps, such as iPhoto and iMovie. I didn't have an apple ID back then, and it didn't matter, because the OS running (Leopard) didn't require one. So I used the preinstalled iPhoto.
    Then, in 2011, i scraped my money together, bought a MacBook Pro and used the built-in Mirgation assistant to get my documents and data there.
    Since then I wasn't able to update iPhoto, because it probably was installed on the PowerMac with a different apple ID - and this information was transported over to my Macbook. The app store wouldn't let me install it with my own ID. And because I can't find a dmg for iPhoto, I can't just uninstall and reinstall it.
    Now using a non-updated iPhoto wasn't really a problem - until now that Mavericks won't support this old version any more. And I can't access my photos any more.
    So is there a way to assign a new Apple ID to iPhoto? Or to uninstall and reinstall it without losing any photos?
    Because there is no way to get the ID from the company that sold me this Power Mac. I don't have any contact data any more...

    To create a new ID see:
    Frequently Asked Questions About Apple ID
    Then either you can:
    - erase the iPod (Settings>General>Reset>Erase all Content and Settings) and set it up as a new iPod with her ID
    - Use the new ID on her iPod but only for:
    Settings>Messages>Send and Receive
    Settings>FaceTime
    Settings>Game Center
    and Settings>iCloud if you want her to have separate Contacts Calendar and some other things.
    You can also continue to use the same/common Apple ID for Settings>iTunes and App stores so you can share purchases.

  • Assigning a new tax key for V0 and VAT not possible

    Hi Experts,
    Invoice is been created successfully in SUS , XML transfered to XI which in turn created the IDOC in ECC.
    I get the below error while transferring theinvoice IDOC from XI to ECC.
    Assigning a new tax key for V0 and VAT not possible
    Message no. FD008
    Diagnosis
    In Financial Accounting customizing, the tax ID transferred in the invoice is missing so that the system cannot determine a tax code. The system could not determine an entry with the value V0 nor with the value VAT .
    Procedure
    In Financial Accounting customizing, include the external tax ID and a corresponding internal tax code for the present partner.
    Please let me know if I am missing any setup in ECC as I have already maintained the setup in OBCA, OBCD and OMRY.
    Thanks,
    -Devi Swain

    Hi Devi,
    Can you please tell me ,how you resolved this issie,I am getting same error.I I have already maintained the setup in OBCA, OBCD and OMRY.
    Thanks,
    -Sunil

  • PS2013 - When creating a new instance of Project Server hangs in 'Waiting for resources' status

    Hi,
    I have one instance of Project Server 2013 fully operational and I tried to duplicate the instance to make some tests. As I know the issue of using the same Content Database of Project Server in the same Server Farm, I used the powershell  backup/restore/dismount
    and mount the content database to change the site IDs to avoid index duplication. The Project server database was a regular SQL backup and restore in another database.
    I created a new Web App in the port 90 as show below.
    Then I included the Content database of Project Server as separated DB from SharePoint for this new SharePoint -acme90 and I tried to create the new instance. The creation hanged in "Waiting for Resources" status.
    To make another check excluding the reuse of the SharePoint-80 I tried to create another instance both in the SharePoint-80 where is the working instance and in the SharePoint-90, everything default and again they all hanged in Waiting for Resource.
    If I try to create the instance using PowerShell I got the following error:
    PS C:\Users\epm_setup> Mount-SPProjectWebInstance -DatabaseName Test_EPM -SiteCo
    llection http://acme02/epm -Lcid 1046
    Mount-SPProjectWebInstance : Cannot find an SPSite object with Id or Url:
    http://acme02/epm.
    At line:1 char:1
    + Mount-SPProjectWebInstance -DatabaseName Test_EPM -SiteCollection
    http://acme02/ ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ~~~
        + CategoryInfo          : InvalidData: (Microsoft.Offic...ountPwaInstance:
       PSCmdletMountPwaInstance) [Mount-SPProjectWebInstance], SPCmdletPipeBindEx
      ception
        + FullyQualifiedErrorId : Microsoft.Office.Project.Server.Cmdlet.PSCmdletM
       ountPwaInstance
    All SharePoint and Project Server services are running, all App Pools and sites are started at the IIS. I could not find a hanging timer job.
    I cannot stop the hanged process or dismount the instances using Powershell since no instance created.
    How should I solve the hanging status of creation of the instance? As they are in Hyper-V I can go back using one snapshot.
    Thank you.
    Best regards, Ricardo Segawa - Segawas Projetos / Microsoft Partner

    Hi Eric,
    Thank your for your interest in this case.
    I checked for running and crashed PWA jobs and deleted all of them just after restoring the snapshot and tried to create the new instance in the new web app in port 90 (besides the existing and working instance in port 80), but again it hanged in "waiting
    for resources". There is not any timer job hanging, no error in event viewer or in log. So the error is well before working with cloned dbs.
    Answering your questiion, I am working all on 2013. My intention is backup one instance of the port 80 and copy to the instance of port 90, changing of course the url and the index of the content db of SharePoint. The process I used was:
    Create a new web app in port 90, creating a new SharePoint_Content_2 on a
    http://server:90 site.
    Created the top level site called Portal using the Team Site template.
    Create a new content db for new instance of Project Server named EPM_Content_2 using Central Admin.
    Backup content db from port 80 instance of Project Server and restore to this EPM_content_2 using PowerShell cmd.
    Dismounted and mounted this Project Server content db to create new index for existing sites to avoid index conflicts.
    Backup the Project Server DB from port 80 using SQL backup and restored as ProjectWebApp2 db for port 90 instance.
    Tried to create a new instance of Project Server
    http://server:90/pwa on web app of port 90 using the ProjectWebApp2 db and using the same app pool of the other instance. But as in the previous case, it hang out in "Waiting for resources".
    Best regards, Ricardo Segawa - Segawas Projetos / Microsoft Partner

Maybe you are looking for