PPOME issues

Hi All,
I am working with PPOME for creating org structure.
I have few questions:
1. Is it possible to country specific IT in PPOME screen like the one which we can use in PP01.
   Is it possible that through configuration we can add a tab in detail area for country specific infotypes.
2. How can i do config to add additional tabs/infotypes in detail area to maintain object characteristics.
    I tried config in spro but dint work out. Can anyone pls suggest some link.
3. Where can i specify staffing percentage for a person if he is holding more than one position.
4. Where can i specify in PPOME that position is being shared(%).
5. In my details area I can just view Basic data and account assign tab, how can i get cost dist, WS Tabs.
6.I cant see history of any objects, say for position, if i meve position X reporting or belongs to from Org unit A to Org Unit B.
   then i cant see the history of position X (its reporting, belongs to, holder) like we can see in Po10.
   Also, similarly for Org unit.
Pls provide your inputs.
Regards
Aryan

Hi ,
1. I can't see Task in the Find(search ) area.
How can i bring it in search area......Can anyone help me out with this?
2. . Is it possible to country specific IT in PPOME screen like the one which we can use in PP01.
Is it possible that through configuration we can add a tab in detail area for country specific infotypes.
Do i need to set some parameter ID like the one we set to get country specific infotypes in PP01(PNI -US)
along with the config to get the country specific infotype as a tab in details area?
Regards
Aryan

Similar Messages

Issue in PPOME transaction

Hi Experts,
I am able to see an employee in PPOME under 'person' search, but the same employee is not getting reflected under 'user' search.
Pls let me know what could be the possible reason and how to get it reflected.Thanks.
Regards,
Rams

Hi,
Please verify if you can see the same in PP01 transaction as there are issues generally when you create any relationship or object in PPOCE/PPOME transaction.
If you cannot see in PP01 create one and then try, may be you can now see the same.
Thanks,
Ameet

Error message while copying a position in PPOME

Hi,
I get the following error message when trying to copy a position in PPOME
Error during copying. The action has been interrupted.
Message no. 5A505
Any ideas what might cause this?
Regards,
Francois

Hi Francois,
I have found a note that might help solve your issue
1037901 Error during copying in transaction PPOME
1104954 PPOME: Error 5A 505 when copying objects
other customers had similar issue in their user exit, check if you have set up one.
Hope this help
Sarah

ERROR MESSAGE IN PPOME TCODE AFTER UPGRADE TO ECC 6.0

Hi Experts,
I have a question.
Recently our system went for upgrade and during testing phase we have found one issue.
Error message is appearing in PPOME transactio code after upgrade to ECC 6.0
The screen is getting defaulted to Budget section and unable to find the subtype as there are no subtypes available there and showing error message as "Fill in all required fields".
Please let me know your solution on this.
Regards,
Sekhar.

Hi,
- you can deactivate the budget tab in the IMG-activity 'Hide/Show Tab Page'
(SIMG_CFMENUOHP1HFW20 alternatively use SM30 on view 'T77OCTABUS')
1. Create new entries for the following KEY:
a) Scenario OME0
b) Object type 'P', 'O', 'S'
c) Tab Page 'PBC_ORIG'
2. for each of this entries, set the 'Exclude Tab Page'-Flag.
- in case you do not want to deactivate the Budget tab:
The error occurs due to missing entries for subtypes in table T778U
for infotype 1516.
Please maintain the according subtyes you want to use if you create a
budget.
Regards,
Ana

Input fileds not appearing in IT1005 Planned Compensation in Tab for PPOME

Hello friends,
The business requirement is:
- add IT 1005 Planned Compensation as a tab page in T.code PPOME/PPOCE
- I configured the following in system:
- IMG>Personnel Mgt>Org Mgt>Hierarchy Framework>Integrate New Infotype> >Add Infotype as Tab Page in Detail Area>Define your onw tab page>Tab Page Definition (this is option one)>
I added Tab page as z1005, ticked infotype specific and infotype 1005
> Scenario Definition (Hierarchy Framework) > select OME0 >
Tab Page in Scenario for each Object Type >
I entered object type S (as we need it for Position), tab page: z1005, and respecitve sequence, I did not enter any report name, screen no, FM for Icons and Donot display is unchecked.
Once I did this configuration and run PPOME tcode I got the tab page there but in the input fields it is blank and showing text like ##################### just a row like this.
However when I do the same configuration for IT 1050 Job evaluation, it is working fine there. But 1005 is throwing the above error.
Can anybody faced the same problem and resolve the above issue or incase some SAP Notes are available for the same.
thanks
Sunny

In my opinion, that would be "Best Practice". Although I think that term is over-used. Everything varies by each client's needs/wants and what functionality they use in the system.   That being said, even if they're not using portions of functionality today, it's better to plan for it. That way you don't have to redefine the catalog every time you want to use something new.
There really is no "correct" ratio of Jobs to Positions. For a smaller company you're going to have fewer positions assigned to each job. For a larger company, you're going to have more people doing the same work, and therefore more positions assigned to a lot of your jobs.
I generally recommend a new job is created when there is a difference in one or more of the following.
u2022   Tasks (Function) - Administration vs. Manufacturing vs. Engineering, etc.
u2022   Responsibilities - Supervising other people vs. not supervising, Lead, Trainers, etc.
u2022   Pay Range (significant differences) - Except for differences based on location (Someone in San Fran/Bay area is
    going to get more money than someone doing the same job in Iowa; different amts/currencies for different countries)
u2022   Qualifications/Skills - requires a degree or certificate vs. job that doesn't
With your client, I would recommend having the approximately 200 Jobs, and creating the existing Jobs as Job Families so they could still report on data as they see it today.
...Danialle
Edited by: Danialle Rook on Aug 12, 2010 9:49 PM

Position showing in PA30 not PPOME

Hi,
I am using ECC6 and we have a problem where some times when an action is run we can see the employee is linked to their position via their PA record , however in PPOME the employee is not showing as occupying the position. If I run RHINTE00 report this corrects it, however this should not be happening in the first place.
I've checked T77S0 and PLOGI ORGA is switched on.
Has anyone else encountered this issue and found what is causing it and how to correct it?
Thanks
Tom

Hi Tom,
This usually happens when you upload the data either through BDC or LSMW and we have to run the RHINT report for the data to be seen in PA / OM.
However, in the normal process if the PLOGI ORGA integration switch is on in table T77S0, then hiring an employee in PA reflects him in the OM struture.
Hope this helps.
Thanks
Ranjeeta

Issue in PPOMA_CRM (BP's for Org units level1, level2 is not created)

Dear Gurus,
I am facing this issue in Solution Manager , where i have created Org Model in Tx: PPOMA_CRM.
The Coloumn (Business Partner) in this Tx does not show any number assigned to the group.
I deleted the whole structure and recreated it but , it was in vain.
I want to "Map"/"Link" the field "Support Team" in the Service desk ticket to the "Org Model " created in PPOMA , but i am stuck here .
I have also created "RULES" to automatically detect the Support Team using Tx:PFAC , but it does not work either.
Will you please direct me to some document other than "Adv setting doc for Service desk for Solman EHP 1" or any other blog or any suggestion where i can pin down the cause of this error and resolve it.
Thanks in advance.
Regards,
Victor

Hi
please look this thread [Org Unit Business Partner number missing |Org Unit Business Partner number missing;
[Problem with Integration of Organizational Units & BP |Problem with Integration of Organizational Units & BP .;
Thanks,
Jansi

No assignment to org model in PPOME possible

Hello,
When I try to assign in the org model/PPOME (ECC6.0) a person to a position, the system allows that for some persons u2013 for some not. If not, the message u201CNo entry found, 5W800u201C is issued. If I would try to create the relationship A/008 via PP02, the system issues u201CValidity period of record not within validity period of P 0000XXXX, Message no. 5A039u201D.
Can anybody please explain me whatu2019s going on?
T770S0 is maintained in the following way:
PLOGI ORGA X    Integration Switch: Organizational Assignment
PLOGI PLOGI 01 Integration Plan Version / Active Plan Version
RHINTECHECK for personell no. 0000XXXX: all 12 (time-related) records of IT0001 are wrong (error) and the report suggests:
a. Check whether the person is marked in open processes
--> This seems not to be the case
b. Check your organizational assignment, either in infotype 1 or in the organizational structure in the above mentioned period.
--> I think this is also not the problem as org unit and position (PLANS, STELL) are both empty in PA0001.
I am new to HR-module, please explain what is missing, Thanks,
Angie

Hi,
thanks for your answer. Regarding the questions:
> How did you get the employee records into PA0001?
The employee records were transferred from another system into my system via ALE. In the source system the records were created via an interface (I assume). In the source system OM is not used.
> What about the emplyees that you can assign to a position? Do they have a position in PA0001?
No, they donu2019t. All records havenu2019t a position assigned in PA0001.
> Can you find other differences between the employees that work and the ones that don't?
There is only one difference for the employees who donu2019t work: In PA30 on IT "org. assignment" is field personnel area two times displayed with two different values, even that it is the same field:
On the top of the screen:             P0001-WERKS, screen number 0100.
Section enterprise structure:     P0001-WERKS, screen number 2000.
From PA0001-table I can see that these employees have changed their personell area in the past (in the source system). Those records were transfered into my system via ALE, too.
> Check dates to make sure that your employee is active within the dates you try to assign him.
The employees are active in the related period.
Please advise. Thanks,
Angie
Edited by: Angie012 on Feb 14, 2011 9:48 AM

Info type 1001 Additional Data and Maintenance Using PPOME

Hi All,
I have gone through the steps of creating additional data for a new relationship that I have created in Organizational Management. Everything works fine when maintaining this relationship using transaction PO13 - Position maintenance.
Transaction PO13 - 1. Create relationship. 2. Additional data screen comes up. 3. Additional data is saved.
Transaction PPOME - 1. Assign relationship. 2. No Additional data scree.
I have debugged the code and PPOME calls module pool MP100100 the same way at PO13 and infact the system actually goes through the code to call my additional data screen, but the screen is not present in PPOME even though the system calls it.
Has anyone ran into this issue? Is there a solution? Or does PPOME not support the maintenance of relationship additional data?
thanks.
JB

check this view T77OMTABUS.
In the attribute scenerio select the OME0 and then double click on tab page of scenerio of each object type....
against the object S there are several tab page defined. i think you need to create the entry for the additional data also.
hope this would work..
Thanks,
Amar

PPOME - Org.Unit (Acount assignment) goes into DUMP

Hello Gurus,
ive got a Big issue, concerning SAP HR module.
When we start the TC: PPOME we select org.unit from the structure.
It is beeing showed normaly, but only when we select Acount assignment it goes straight into DUMP,
saying:
Runtime Errors         STORAGE_PARAMETERS_WRONG_SET
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
    In the system profile, set the parameters
    -abap/heap_area_dia and
    -abap/heap_area_nondia
    to a maximum of 189714480. To be on the safe side, reduce the value by 10,000,
    000.
    Then restart the SAP system.
These corrections are not needed since the system for every other purpose (SD, MM, FI) is working, only for HR module during acount assignment is going into DUMP.
Any advice why this happens to some of the Org.Units?
Regards,
Laurynas Prikockis

Hi ,
Please check this thread might be helpful.
Runtime Errors STORAGE_PARAMETERS_WRONG_SET
Regards,
Siraj.

Unable to assign multiple company code to a controlling area in PPOME

Hi Experts
In PPOME I was trying to assign multiple company codes under 1 controlling area in account assignment. e.g. ABC is the company, its 2 company codes, ABC1 and ABC2.
In PPOME when I am assigning the root org unit (ABC) with controlling area ABC1 and company code ABC1, it hierarchially inherits the below structure.
Whereas when I want to change the company code for ABC2 orgunit, it doesnot give the provision to change. It hierarchially inherits the root org unit structure.
I have tried to differentiate it by creating different costcentres for different companycodes, but that also doesnot help to fulfill the need.
Please help me to solve the issue as early as possible.
Warm Regards
Anwi

Hi Rajdeep
The same function can be handled from PPOME also, because in case of assignment of enterprise structure components with org structure components we use IT 1008.
However, if yours process is followed, then also I am unable to change the COMPANY CODE. Rest can be well taken care of.
Cheers
Anwi

PPOME custom infotype

Dear friends,
I have added custom OM infotype in PPOME as a new tab page.
if i create any organisational unit in ppome, i want to know the immidiate parent organisational unit (ie. Objid of the parent org unit) of this newly created org unit.
Also if the cursor is on some other org unit other than the newly created org unit.
then i am not able to get the objid of this newly creatd org unit in PBO or PAI of
my custom infotype screen.
Any help will be highly rewarded.
Thanks,
Vijay.

Hello,
Note 327614 and 385019 might help troubleshoot your issue
Kind regards
Sarah

Infotype in PPOME

Hi,
I created a new infotype and by customizing a new tab is appearing in PPOME with it.
The issue is the content of the screen itself. The tab in PPOME is nothing but a blank display (screen 7000). Infotype has not a screen 7000. How can this screen be filled with the infotype?
Cheers.

Hi,
Refer
https://forums.sdn.sap.com/click.jspa?searchID=4152994&messageID=2201930
https://forums.sdn.sap.com/click.jspa?searchID=4152994&messageID=3771704
https://forums.sdn.sap.com/click.jspa?searchID=4152994&messageID=2201930
Regards

Add custom infotype on ppome

Hi all,
I'm struggling with adding a custom infotype (tab) to a position in transaction PPOME.
I searched on sdn and the net, but I'm not able to find a solution.
Problem is that the tab is displayed, but there's only the message 'no subscreen found' displayed.
I've done following steps :
- created the infotype using PM01
- created subscreen 7000 using PPCI
- added subscreen 7000 in table T77ID
- adapt the sequence of the framework in SPRO
I'm sure that I'm missing something, but what ?
Thanks for the help !
best regards,

Hello,
Note 327614 and 385019 might help troubleshoot your issue
Kind regards
Sarah

Unable to Storage Location in PPOMA

Hi SRM experts,
I'm working on SRM7.0 and have the following issue:
Tcode: PPOMA_BBP
Tab: Extended Attributes
Radio button: Storage Locations
I am able to select my R/3 backend system from drop down but unable find any entries for Storage Locations i.e. when I press F4 in filed stor.location, message "No values found" is displayed.
If I enter the Storage Locations manually (which I have created in R/3) and press enter, message "No storage location assigned to value, Message no. BBP_ATTR017" is dispalyed.
Additional info: I have successfully replicated locations (i.e. Plants) from R/3 and able to view the list of Plants from F4 help in the radio button Locations. Due to this, I'm finding an error "Application "Confirmation": Define the attribute LAG" for an user in PPOMA & unable to create any shopping cart.
Please help.
Thanks,
Hari

Hi,
To update the location from ECC you need run the report
BBP_ATTR_TEXT_REFRESH. Please do the following:
Go to transaction SE38 -> Enter BBP_ATTR_TEXT_REFRESH -> Execute (F8)
-> Enter 'Attribute'-'LAG', "your backend system" and EN
-> Run the report (make sure the test mode option is deflagged)
-> Select all -> Refresh,
this updates the descriptions from the backend.
If this not solve the issue, please check in your backend system if
the note 1175255 is applied. If not, please apply it.
After performing above mentioned steps - go PPOMA_BBP while adding storage locations under Ext attributes tab:
1. Input your 'Source System' and select applicable 'Storage location' from the dropdown list and do not key in manually.
Hope this should resolve your issue.
Regards,
GM

PPOME issues

Similar Messages

Maybe you are looking for