Pre build weblogic image for virtual box

Hi Brother,
I would like to have weblogic 9/10/11 virtualbox image to run on my PC 32bit CPU for self study, when can I download the image? I see the available download version is Weblogic12 only and allow run on 64bit CPU.
Thanks
John

Hi John,
You need open ticket with oracle to get those installation for 32 bit
Regards
kal

Similar Messages

Building an image for multiple types of Macs...

I need to build images for iMac G3 500's, iMac G4's, eMacs, & 400 Mhz G4 Towers. My question is this...
Using OS 10.3 or 10.4, can I build an image on one of these machines that will have all of the appropriate drivers, software, etc. to distribute to all of them? Or... are there specific items installed during the OS install for some machines and not others?

Contradictory evidence exists whether or not you can really build one unique image for use for all of those machines. One interesting factor here is you say 10.3 or 10.4. Those operating systems can not really be run from one image simultaneously.
In addition, some G4 400 Mhz towers are incapable of target disk mode or being used as the source for a migration assistant transfer. These two articles tell you which those are:
http://docs.info.apple.com/article.html?artnum=58583
http://docs.info.apple.com/article.html?artnum=58418
Assuming you have license for Mac OS X for all the machines there, I suggest building a by model base of a partition you can import to each machine from several external hard drives.
The migration assistant after installing Mac OS X on a specific machine can help simplify how many partitions you need to create:
http://docs.info.apple.com/article.html?artnum=25773
You just install the operating system and it will import data using the migration assistant.
Now the migration assistant will import data from a 10.3 machine to a 10.4 machine, but you can't do vice versa.

Pre-loading external images for XML-based gallery

I'm working-on an XML-based photo gallery here:
http://www.unionandparkwood.com/demo/flash_gallery/
It works how I want it, except that the first time a
thumbnail is clicked for an image, it pauses long enough to skip
the fade. If you click-through the images a second time, you'll see
that it works smoothly. My guess is that the first time the
thumbnail is clicked, the image isn't cached, yet.
I tried to fix this by creating a JavaScript file for the
page to pre-load each image and thumbnail:
0003a = new Image;
0003a.src = "images/Down-Range.jpg";
0003b = new Image;
0003b.src = "thumbnails/Down-Range.jpg";
But that didn't work. What would be the best way to do this?
I included a link to "Download ZIP" of the FLA project on
this page, too, because it wouldn't be easy for me to describe
what's happening. In a nutshell, a thumbnail click launches a
function that loads the appropriate image into the main image
holder. What seems to be happening the first time is the image
isn't loaded before the fade is finished, so the image just appears
after a short pause the first time.

>>What seems to be happening the first time is the
image isn't loaded before
>>the fade is finished, so the image just appears after
a short pause the
>>first time.
As has been said many times in thos forum - use the
MovieClipLoader class to
load images, and then use that class' onLoadInit method to do
things with
the loaded image. Loading is asynchronous - you _have_ to
wait until the
image is done loading before doing a fade.
Dave -
www.offroadfire.com
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/

Images for picture box

I have to create a system configuration control for our machines.
What we are going to have are a lot of images (about 50 or so) that will be displayed as the operator selects different sub-systems to configure.
We started with a tabbed index, used "drag-n-drop" to put a different image on each tab of the front panel, then used the block diagram to switch from one tab to the next. So, in our block diagram, there is an enumeration wired to a Tab Control property-node for *each* change to the tabbed index.
Here is the problem: When we add new tabs to the tabbed index control (future features, etc.), the Tab Control enum changes, and the wire from the Tab Control enum to the Tab Control property node breaks.
Fixing these broken wires is tedious.
We can drag-n-drop the images directly onto the block diagram, and this would be an acceptable solution if we could find out how to get the images on the block diagram to load into a picture control.
Most of the images have to be sized to fit, so we don't want to have them dynamically linked to a folder. It would be best if we could place all of our images onto either the front panel or the block diagram, then load those into a picture box (or something similar) whenever the image is needed. But, for images dropped on the block diagram, there are no wires to connect them with a picture box.
Any thoughts? Suggestions?
Attached file is saved in 8.2 format.
Angus Cattle from Pool Ranch and Steel Repairs via Joe's Welding.
Attachments:
Calibration.vi ‏104 KB

I would suggest creating a typedef'd enumeration. This is a control (.CTL file) that consists of an enumeration and it's Status set to typedef
When you drop instances of this typdef on your block diagram OR fron panel, it is LINKED to the CTL. Any changes made the the CTL will AUTOMATICALLY update the instances on your fornt panel and block diagram.
When you add an item to your typdef'd enum, your Tab Control and your case statements will likely break, but you can usually use Add Page or Add Case and move forward. Your existing enums in the other cases should update.
LabVIEW wiki: Type Definition
LabVIEW wiki: Enum: Potential Uses
Message Edited by Phillip Brooks on 01-02-2008 12:28 PM
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness
Attachments:
typdef.gif ‏9 KB

DVD drive rawdisk for Virtual Box

Hello, dear Archers !
I know this not an appropriate forum for such a question, but I don't wanna register on VB's forum (I don't like how much Oracle would like to know about me ). So, here is my question.
I'm trying to use DVD drive of host system as a physical drive in guest system. I mean, using host's DVD drive directly on guest system, so guest system would see which device it really is. So, I'm trying to use this command to generate a rawdisk for this drive:
VBoxManage internalcommands createrawvmdk -filename dvd.vmdk -rawdisk /dev/cdrom
However, I'm getting this error:
VBoxManage: error: Cannot open the raw disk '/dev/cdrom': VERR_MEDIA_NOT_PRESENT
VBoxManage: error: The raw disk vmdk file was not created
Is there any chance to bypass this error ? I just wanna connect this drive to guest system, so I could be able to, for example, flash and stuff like that...

The VirtualBox application has to be installed on the boot drive I believe, however it is then definitely possible to create and store and run virtual machines on any drive.

Error installing virtual box guest additons

On my windows 7 laptop I have virtual box 4.0 . I installed Oracle enterprise linux 5.5 and i want to make a shared folder . When i run VBoxLinuxAdditions.run I get the folowing :
"Your system does not seem to be set up to build kernel modules . If the following module compilation fails then this could be the reason .
The missing package can be probably installed with yum install kernel-devel-2.6.18-195.el5"
After this it invite me to see the content of file /var/log/vboxadd-install.log . In this log it tell me it can not find the kernel sources .
What can I do? I must download anothr version of Oracle enterprise linux? wihich one?
Many thanks,
Aurel

Hello,
I configured the yum tool (as I find out on http://public-yum.oracle.com/) and I run yum install kernel-devel . After that I run sh /media/VBOXADDITIONS_4.0.0_69151/VBoxLinuxAdditions.run
The process of building kernel modules for Virtual Box additions is ending in error - it doesn't know about gcc tool. In what package there is this tool?
Thank you,
Aurel

Webcenter PS3 pre-build virtual machine question

Experts,
I have following queries regarding VM for web center
1) What are the limitation of using pre-build virtual machine for development/testing environment compared to standard installation?
2) What are the webcenter features not supported by pre-build WC VM but is supported in standard installation?
I am thinking of using pre-build WC VM for development and testing environment. So, want to know the limitation before using it.
Appreciate any help on this.
Ashish
P.S - Standard installation is installing DB (using RCU), weblogic & webcenter suite.

The pre build is very good for demonstration purpose. You can do some development on it but i don't think this is recommended.
The pre build machine is just a plain installation with a DB, weblogic and webcenter suite. If you create your own VM with the same software, than there is not much difference between the pre build machine.
If you don't plan on using a real server for your development purpose than you can use the pre build machine. I don't know if it is allowed so maybe you should check this with Oracle. There isn't a real difference between an installation that you will do an the pre build machine to technicaly, you could use it... Licence wise... you should check it with Oracle.

Email activity for soa and bam with pre-built virtualbox images

Dear OTN,
i am running pre built virtualbox image for soa and bam and want to run with email activity and configure the email inside the virtualbox can anyone help me with email activity in pre-built virtualbox image.
Thanks & Regards,
Pavan

Hi there
I have a Technote that shows how the information can be published from EBS to BAM. In addition you could create an end to end visibility across the products e.g. B2B - BPEL - EBS - Financials etc by raising the events to BAM .
There is no out of the box dashboards available today. However, i have a number of customers who are doing this use case by themselves or through some SI/Oracle consulting.
can we contact you offline to discuss your requirement?
http://www.oracle.com/technology/products/integration/bam/11g/technotes11g/whitepaperBAM_E-BusinessSuiteIntegration.pdf
There are certified adapters available for EBS to FM as well.
Regards
Payal
Edited by: PayalS on May 21, 2010 4:25 PM

Demo License for Virtual Image of Web Security

Hello,
I had downloaded the latest image for Virtual WSA.
But I am not able to get the demo license for that.
It is showing the message "Access to the page resitricted."
Thank you -- and you helpp will be appriciated..
regards
Hozefa

Hello,
You should have privileges as long as you are logging into the site using your CCO ID. If you do not have one please register for a CCO ID on www.cisco.com and you should have access to get a demo license. If you are logging in with your CCO ID and its still giving you the error message then you will need to reach out to your Cisco Account manager to provide the demo license. I apologize for any inconvenience this causes.
Best Regards,
Michael Hautekeete
Customer Support Engineer
Cisco Content Security - Web Security Appliance
http://www.cisco.com/en/US/products/ps11169/serv_group_home.html
https://supportforums.cisco.com/community/netpro/security/web
https://supportforums.cisco.com/community/feeds?community=2091

Pre-Build VM for IAM and OAM 11G

Hi,
Is there any pre-build VM available for IDM and OAM 11G version to download and use it?
Thanks,
Meera Hussain

Hello,
VMs provided by Oracle are available at Oracle VM Templates
I don't think IDM is available right now.
-Sylvain
When closing a thread as answered remember to mark the correct and helpful posts to make it easier for others to find them

Pre-Size Your PPI for Best Print - Once Good Advice Still Good?

In another thread someone mentinoed pre-sizing image data to prepare it for best printing.
For a long time it's been "standard advice" to resize images so that the ppi is an even division of the printer's dpi, because some years ago occasionally one would run across printers that would produce poor results if you didn't - you might see jaggies in straight edges for example.
Thing is, computers have (not so) quietly been getting more powerful over time, and printer makers have been competing with one another to try to make their printers produce better results than the other guys. One way they've done this is by improving the quality of the algorithms in the printer drivers. Use of mega storage and high accuracy math, which was once taxing on older computer systems, is now standard practice.
So it's time to question the old rule of thumb.
Making a few assumptions about the many variables (what printer, what OS, what version of drivers, what application being used to print) , there seem to be several questions here:
1. Can the image resolution be too high, causing the printer driver to make bad decisions about what ink dots to lay down where on the paper?
2. Does it help or matter if the image PPI is an even division of the printer's DPI?
As I have done in the past, I set out to do some actual testing, to see if I can actually SEE anything to help answer these questions.
I created a sharp image to be printed at 3 x 2 inches: http://Noel.ProDigitalSoftware.com/ForumPosts/Ghirardelli.jpg
Then I printed it at 6 different resolutions (1000, 720, 567, 300, 200, and 100 ppi) by resampling the image, labeling it, printing from Photoshop CS5, and feeding the same sheet of HP Premium Plus photo paper through my older HP 932c inkjet printer 6 times. The printer was set to its highest quality settings, including 2400 x 1200 dpi mode. This was the result:
I then looked critically and as objectively as I could at the different images. Here are my observations:
Naked eye:
The four highest resolution images (1000, 720, 567, and 300 ppi) all seemed to have an equivalent high level of crisp detail.
I could not detect the inkjet dots. Smooth objects look smooth.
Jeweler's Loupe:
I could see significant reduction in the finest details in the 300 ppi print vs. the three higher resolution prints, and a slight reduction in the 567 ppi vs. 720.
At no resolution were any jaggies or evidence of aliasing visible.
The inkjet dot pattern was plainly visible, and it does differ between the different prints. But it was not possible to say whether one was "better".
Things seem to have a little more texture in the 1000 ppi print vs. the 720 and 567 ppi prints.
Macro Photo:
Lacking a high resolution scanner, I took photographs of the 6 different prints. Unfortunately, I didn't have the time to set up with my best lighting and lens combination, so I got some reflections off the glossy paper, and and at this resolution I can't really see the inkject dots in the photos. I want to repeat this when I can find more time to do it better. As I did these photos hand-held, I believe the variances between them could be slightly influencing the results. But I'm going to post them anyway, for you to see.
I could see ever so slightly more detail in the 720 ppi print vs. the 1000 ppi print, though from the size of the tiny dust/light reflections I think it may have just been the better focused. Note that this observation is not supported by direct observation through the jeweler's loupe, above.
The 1000 ppi and 567 ppi prints seems to have slightly more noise or texture than the 720 ppi print. Again, this might be issues introduced by the photography process, though I did note a possible increase in texture in the 1000 ppi print with the jeweler's loupe as well.
Beyond just the blurring, I could see some evidence that straight lines are not quite as straight in the lower resolutions (300 ppi and lower). This seemed more apparent than with the jeweler's loupe examination, and I wonder whether the Photoshop downsampling process could have introduced it.
Left to right, top to bottom: 1000, 720, 567, 300, 200, 100:
Conclusions:
Printing to my HP 932c inkject printer on Windows 7 x64
300 ppi is not sufficient to coax the best possible detail out of an inkjet printer. It appears a number in the vicinity of 720 or more is better, and this number could be much higher with modern very high resolution printers (mine's old).
Speed was no different in printing any of these - a modern computer can process a huge amount of data in the blink of an eye.
When a sufficiently high resolution image is printed (in this case 567 ppi or higher) I saw virtually no evidence that a particular ppi value is superior, for example an even division of the printer's dpi, though in hindsight I realize I should have prepared a 600 ppi image (duh). I will add a 600 ppi image before I re-photograph the results.
It's possible ever so slightly more texture becomes visible at 1000 ppi than 720 ppi, but it might be just noise.
Practically speaking, from looking critically at the results I could not see a reason to pre-size the image for a specific ppi value.
I encourage you to experiment and report your results with your particular combination of gear.
Your comments are welcome!
-Noel

Noel Carboni wrote:
Jeff Schewe wrote:
I would never suggest people actually downsample though...why waste the pixels?
Exactly. There was a statement in another recent thread that downsampling to be an even fraction of the print dpi was important to do.
It might have been a misapplied extension of the advice to upsample. It's not been all that long that we've had big enough high resolution data that even makes downsampling a possibility.
-Noel
I believe I was the one to make that statement, which was based on recommendations by an Epson Print expert at a seminar demoing printers. He showed to prints from the same file, one set at an even multiple of 720 and the other some random number. It was subtle but visible the difference. That was probably 5 years ago.
In the meantime, I have made extensive tests of prints on my Epson 3800 trying many combinations of single pass, hi speed, Super fine print (2880x1440) and down to the basic level.
Everything evened out at 720 dpi. At 360, which is where I output from ACR, I can make an 8x12 print with no resampling whatsoever. Upping that to 720 and pushing the printer hard (2880x1440, single pass on Canson Platine), I see a discernable difference in the smooth tonalities.
As I understood you from past conversations, you employ the maximum output size from ACR which in my case, would double the file size by upsampling, and if necessary, downsample from that. I am not comfortable doing that as a default operation, but perhaps Jeff S might step in here and clarify. After all, ACR does offer that option! But my file size now goes from ~70MP to 143 MP, cutting my storage capability by 1/2. It's not a trivial matter when two of us here can run 600 to 800 images in 1/2 day!

Installing ArchLinx+Guest Additions in Virtual Box(error during guest)

The Arch Linux install seemed to go through smoothly. I installed it using the wiki page, rebooted, and logged in as root. I am installing this for a class, so trying to follow the instructions to do so. Next, we are supposed to install 'Guest Additions' for Virtual box using the instructions below:
Now, you should install "Guest Additions" for VirtualBox. Guest additions allows you to share files between host and guest systems. This is very convenient for development as you will need to copy files back and forth between the host and guest operating systems. You can download Guest Additions at *link*.
You need to start the virtual machine before you can continue installing Guest Additions. To do that, just select your VM name from the list on the left hand side in VirtualBox and click Start. After logging into Arch Linux, you should mount this ISO image just as you had mounted the Arch Linux ISO file. You can then mount the cdrom inside the Guest OS by doing:
mkdir /mnt/cdrom
mount -t iso9660 /dev/cdrom0 /mnt/cdrom
Now install the guest additions by doing:
cd /mnt/cdrom
sh ./VBoxLinuxAdditions-x86.run
This will compile and install the kernel modules necessary for Guest Additions functionality. Please note that if you
recompile your own kernel (later as a part of project requirements), you will have to run this again so that the modules are
compiled and installed for the new kernel too.
Under settings for VBox, I mounted the Guest Additions image file, started Arch Linux, logged in as root, and followed the instructions above. I was able to do all of the above, but when I excute the last line, I am given this message:
http://img132.imageshack.us/img132/3971/linuxd.png
I have no idea where to go from here, and any help would be greatly appreciated.
Also, I feel like I have installed Arch Linux incorrectly. All the videos and pictures I see show a GUI type interface, but all I am presented with is a text-based interface. When I boot it up, it asks me to log in, and I am then taken to the command line, but I don't see the same GUI interface everyone else seems to have. Is this normal for a basic Arch Linux install? Thanks in advance.

Arch has no GUI until you install one. Some people don't want a GUI, so it's left to the user. The base install has only a command line interface.
You should probably read the Beginners Guide.
In case you missed them, there's two short articles, also on the wiki that might help you understand Arch, Arch Linux and The Arch Way

Virtual box vs Oracle Vm

Hi,
I want to know the pros and cons for tehse 2 products whicg Oracle owns
If i have to use Virtual box as it has features like snapshots - using physical serial port of the server on the VM guest and using USB's , what are the pre - requisites to use it
Is this as stable as Oracle VM and a freeware?
Can i install server OS as guests with Virtual box.
Like Oracle VM has - VM server which has OEL as base and is managed by Oracm VM manager - how is the setup for Virtual box.
Thanks.......

Virtualbox is an application, similar in configuration and setup like VMware, VirtualPC and other VM applications that need a host Operating system. Oracle VM server has it's on OS and usually gets installed on a bare metal computer.
http://en.wikipedia.org/wiki/X86_virtualization
http://www.oracle.com/us/technologies/virtualization/oraclevm/061976.html
http://blogs.oracle.com/virtualization/2009/05/oracle_vm_blog_basics_of_oracl.html
It seems for the purpose of testing you might be able to install it as a guest OS in VMware Fusion and maybe Virtualbox:
http://forums.virtualbox.org/viewtopic.php?f=8&t=31357
From what I understand, Virtualbox is not a certified platform for Oracle Enterprise Linux and running Oracle database. However, Oracle VM and VMware ESX are certified platforms for OEL when installed directly on the computer hardware.
Edited by: Markus Waldorf on Aug 18, 2010 1:08 PM

(Stupid Question) : Difference between "O VM" and "O VM Virtual Box"

What are the differences between
Oracle VM : http://www.oracle.com/technetwork/server-storage/vm/overview/index.html
and
Oracle VM Virtual Box : http://www.oracle.com/technetwork/server-storage/virtualbox/overview/index.html
There's no Support for Virtual Box ??
But what else ?
Hemant K Chitale

Hemant K Chitale wrote:
Oracle VM : http://www.oracle.com/technetwork/server-storage/vm/overview/index.html
This is a server virtualization solution designed to run on bare-metal server hardware. It's similar to VMware vSphere or Microsoft Hyper-V.
Oracle VM Virtual Box : http://www.oracle.com/technetwork/server-storage/virtualbox/overview/index.html
This is a desktop solution designed to run on your workstation. It's similar to VMware Workstation or Parallels.

How build where clause in select statement in FM for Virtual provider

Hi
I looking for example of FM for Virtual provider where I find code how assign to select statement "where" clause value from query variable.
In following code how build t_r_custtype range and how assign value to it.
CODE********************************
TYPE-POOLS: abap.
initialize
CLEAR: e_t_data, e_t_msg.
this is specific to infoprovider VIRTPROV
CHECK i_infoprov = 'VIRTPROV'.
FIELD-SYMBOLS: <l_s_sbook> TYPE sbook,
                 <l_s_data> TYPE ANY.
DATA: l_t_component TYPE abap_compdescr_tab,
        l_t_sbook     TYPE TABLE OF sbook.
initialize
CLEAR e_t_data.
Data selection / only Business Customer
SELECT * FROM sbook
    INTO CORRESPONDING FIELDS OF TABLE l_t_sbook
    WHERE custtype in t_r_custtype.
ENDCODE********************************
Thanks a lot
Adam

Hello,
Would you like fill the ranges in Customer exit for BEx..?
If Yes. please refer the attachment for the whole code...
"Sample code in Customer Exit in BEx"
IF i_step = 2.
CASE i_vnam.
WHEN 'ZDAY_CX'.
LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'ZDAY_IN'.
CLEAR: l_s_range.
ZT_DT1 = loc_var_range-low.
ZT_DT2 = loc_var_range-HIGH.
CALL FUNCTION 'DATE_CREATE'
EXPORTING
ANZAHL_JAHRE = 0
ANZAHL_KALTAGE = 0
ANZAHL_MONATE = '-1'
ANZAHL_TAGE = 0
DATUM_EIN = ZT_DT1
DATUM_EIN_ULT = ' '
ULTIMO_SETZEN = ' '
IMPORTING
DATUM_AUS = ZFIDAY .
E_TT =
E_ULTKZ =
CALL FUNCTION 'DATE_CREATE'
EXPORTING
ANZAHL_JAHRE = 0
ANZAHL_KALTAGE = 0
ANZAHL_MONATE = '-1'
ANZAHL_TAGE = 0
DATUM_EIN = ZT_DT2
DATUM_EIN_ULT = ' '
ULTIMO_SETZEN = ' '
IMPORTING
DATUM_AUS = ZLSDAY.
E_TT =
E_ULTKZ =
l_s_range-low = ZFIDAY .
l_s_range-high = ZLSDAY .
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ENDLOOP.
*****************************************End*************************************
**To get the From date (For Text Variable) as per the user input date interval range**
WHEN 'ZR_S'.
LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'ZDAY_IN'.
CLEAR: l_s_range.
ZT_DT1 = loc_var_range-low.
ZT_DT2 = loc_var_range-HIGH.
CALL FUNCTION 'DATE_CREATE'
EXPORTING
ANZAHL_JAHRE = 0
ANZAHL_KALTAGE = 0
ANZAHL_MONATE = 0
ANZAHL_TAGE = 0
DATUM_EIN = ZT_DT1
DATUM_EIN_ULT = ' '
ULTIMO_SETZEN = ' '
IMPORTING
DATUM_AUS = ZFIDAY .
E_TT =
E_ULTKZ =
l_s_range-low0(2) = ZFIDAY6(2).
l_s_range-low+2(1) = '.'.
l_s_range-low3(2) = ZFIDAY4(2).
l_s_range-low+5(1) ='.'.
l_s_range-low6(4) = ZFIDAY0(4).
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ENDLOOP.
*****************************************End*************************************
Please let me know if any clarification required..
Rinku..

Pre build weblogic image for virtual box

Similar Messages

Maybe you are looking for