Premiere Pro CC stops responding when a clip is imported and altered.

Whenever I open Premiere Pro CC it works fine all up until I import a video/picture(or several) the problem appears when I try to click the video/image and alter it. Even just right-clicking the video/image causes it to close. I'm pretty stumped as I'm not too good at these kinds of things.

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
Photo Scaling for Video http://forums.adobe.com/thread/450798

Similar Messages

Premiere Pro Only Playing audio when i press play. And it says "Media Offline" with a big red screen. What do i do?

Premiere Pro Only Playing audio when i press play. And it says "Media Offline" with a big red screen. What do i do?

And When i double click the video files in the editing program, another window pops up named: Source:Sequence 01. But the window Program:Sequence 01 Has a Red screen on it! But the file clearly works so i have no idea what to do.

Safari stops responding when I try to bookmark (and other slow problems!)

Two weeks ago my logicboard died, so I sent my ibook out to Apple for it to be fixed. Ever since I got it back this past Tuesday, my Safari has been extremely slow, but nothing else is wrong with my computer. Here are the problems:
- The biggest issue is that Safari stops responding when I try to make a bookmark. The popup appears to select the bookmark's destination and to enter the name, but when you hit ok, the rainbow wheel comes up and it stops responding, so I have to reset Safari, and now I can't make new bookmarks at all.
- It lags when it tries to open new windows, especially new tabs.
- If a new page loads that scrolls at all, and then I try to scroll down, the wheel appears for several seconds until it can load the rest of the page. It's as though it gets stuck before it can scroll.
- Sometimes when typing, it will also start to lag behind my typing speed, or if I try to click on a new field, it will not immediately allow me to type on occasion.
All these things have never happened before I sent it out. I have reset my cache, and I have tried entering the open DNS addresses in my networks, which has improved loading speed, but hasn't fixed any of these problems. Does anyone have any idea what could be wrong and how I can fix anything?
Message was edited by: canyon to the sky

Try verifying the hard disk.
Boot from your restore disk while holding down the C key until you see the Apple logo, then let go of the C key. You'll see an Installation window, select English. From the Menu Bar, select Utilities/Disk Utility. Select MacintoshHD 10.x.x in the panel on the left, select the FirstAid tab, then click Verify. If DU reports errors, click Repair. If Disk Utility cannot repair the disk you have several options. One is DiskWarrior or
TechToolPro If Disk Utility can repair any errors, go back to the Menu Bar, click Utilities/Startup Disk. In the Startup Disk window select MacintoshHD 10.x.x and click Restart.
If you don't have a restore disk, try booting into Safe Mode
Carolyn

Stops responding when signing in to ebay and stops internet explorer also until computer powered back on from shut down

when asked to sign back in to my ebay firefox stopped resonding and when i closed it down and tried to reopen firefox it does nothing so i tried explorer and it also would not open.i tried a restart and it was the same.i shut down and they worked again but i still cannot use firefox to sign in to ebay,explorer works no problem.i tried resetting firefox to no effect and im using 1701 so no update available.i tried clearing cache and memory --no change(im on windows 7 home premium)on a HP laptop.this started 3 days ago

Try verifying the hard disk.
Boot from your restore disk while holding down the C key until you see the Apple logo, then let go of the C key. You'll see an Installation window, select English. From the Menu Bar, select Utilities/Disk Utility. Select MacintoshHD 10.x.x in the panel on the left, select the FirstAid tab, then click Verify. If DU reports errors, click Repair. If Disk Utility cannot repair the disk you have several options. One is DiskWarrior or
TechToolPro If Disk Utility can repair any errors, go back to the Menu Bar, click Utilities/Startup Disk. In the Startup Disk window select MacintoshHD 10.x.x and click Restart.
If you don't have a restore disk, try booting into Safe Mode
Carolyn

Macbook pro wireless stop responding when s/pdif port in use

Macbook pro 15 i7 user here. Have anyone experience the same issue as me? how do i resolve this issue?
it stated airport detected wireless but it just dont issue DHCP ip address out. using VLC to run mkv video format.
video runs fine however not the wireless.:(

I'm guessing you mean that the computer is not receiving a DHCP address, rather than that it is not sending one, when outputting sound through the optical "side" of the sound out port ? Or do you mean that you are using your MBP as a de facto wireless base station and DHCP server for other devices, and that they are not receiving addresses from it when you have the MBP hooked up through the optical digital component of the sound out port?
Winthur> sorry, i should say my MBP is not RECEIVING an ip address. my bad
My MBP is connected to MyHome network but not getting an ip from my direct router when connecting through wireless; when i am using S/PDIF connection from the MBP combo 3.5mm jack to my digital z5500 speaker.
Do things (whichever you intend) work normally when using the sound out port's analogue mode?
Winthur> All things work great (the S/PDIF digital sound out via VLC) ACCEPT that i cant surf net(when my S/PDIF port in use movie playing via VLC or whichever prog). it just dont get any ip, it got a self assigned ip instead. (rem the airport is connected in yellow state)
Is there any possible that the equipment you are outputting the optical signal to itself is producing interference in the relevant wireless spectrum, either because of proximity to your wireless router or the MBP (if it is the router itself in this case) , or, possibly, simply poor shielding on whatever router you happen to be using?
Winthur> i am not sure of this but i am not using any wireless speakers and such. it is a direct Toslink cable (with one end 3.5mm converter) to my z5500 speaker. oh 1 tricky issue i notice is, i do have a HP AP connected to my WRT160N v2 router port. so when i switch the failed wireless connection to connect to internet via this HP AP (from MyHome network to MyAP network SSID), it work.(manage to grab an ip and connect to internet.) but when i switch back to connect wirelessly to my direct router (MyHome network), it failed gettng ip again. Both scenerios are with S/PDIF VLC in use with movie playback)
If you aren't using the MBP as the router itself (ie. your problem is scenario 1 in my first paragraph) then what brand of router is it, and what sort of wireless protocol and security are you using?
Winthur> using WRT160N v2 with 2.0.02 firmware. i know there is a new firmware out there 2.0.03 but is there really a possibility of firmware issue? i tried to flash once and the whole router went dead. manage to revive though. wireless protocol i am not sure but the security is WEP. both my router and my HP AP uses WEP
(Sorry about that rather prolix set of questions! I guess, fundamentally, I'm asking for more information about just what your set-up is here, and just what the problem is! )
Winthur> Glad you ask as i dont know what kind of info i should give to ask for help. in the nutshell:
-i have a WRT 160N V2 firmware 2.0.02 router.
-i have a HP AP connect to this router.
-Router SSID is MyHome network
-HP AP SSID is MyAP network
-both uses WEP
-both network can be "interswitch" without problem in surfing the internet without S/PDIF in use
-problem in getting IP from MyHome network (airport turns yellow) when S/PDIF in use
-Switch to MyAP with S/PDIF in use no problem.
-when S/PDIF unplugged, switch to MyHome network, can be use again.
appreciate your prompt reply.
Best Reg
Winthur.

99 or 100% when it says Premiere Pro has stopped working and needs to close. What's going on?

I am using the premiere pro trial at the moment and have been trying to render a video for a solid week now. My computer is far more powerful then the recommended specs and yet it still takes 2 hours to attempt to export a 3 minute video (that isn't even heavily edited) and not only that but it will get to 99 or 100% when it says Premiere Pro has stopped working and needs to close. I have used earlier versions of the product before and never had such problems, even my 2 year old laptop could breeze exporting. What's going on?

Thanks, I'm a bit new to asking for help!
Version : Premiere Pro CC 2014.2 (8.2)
It is up to date
I'm using Windows 8.1 build 9600
My sources are contained in .mov, .mp4 and .png. The codec I'm trying to use is H.264
After I set the project to export I got this error message every time it gets to either '99' or '100%' completed. "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available"
I have never had such a problem with the program which makes me think it might have something to do with a recent update.
No other notable software was running during the export.
I don't have any third-party effects or codecs installed.
I have 64 bit OS and processor, Intel i5 - 4670K quad core clocked at 3.40 GHz. 12 GB of RAM. And a GTX 770 with 2GB of video RAM.
Unless it was installed in the trial, I do not have the Mercury Playback Engine.
And finally, it can be noticeably choppy during the preview when it gets to the part I don't have rendered but is fine again for a bit if I replay those parts. A part from being a bit slower then usual, I didn't actually run into a major problem until I started exporting.
Thank you for the help! Any suggestions?

After i upgrade to lion and updated logic pro to version 9.1.6 stops responding when loading "Ryu Chords" it stops responding, do anyone have any ideas what problem it can be?

After i upgrade to lion and updated logic pro to version 9.1.6 stops responding when loading "Ryu Chords" it stops responding on certain moment, i tried to reinstall freshly and update to version 9.1.5 but problem same so at this moment version is 9.1.6. I tried 64bit too but no changes. And the thing is that i need studio and i need to sort this problem quick.
Please everybody if you had same problem give me answer or any idea what to do
Thanks

The sample rate is not 128 or so, you probably mean the buffer size...
But the performance drop makes sense: switching between a 64 bit process and 32 bit doesn't come free: it cost performance and creates a jitter, which also either shows as performance lost or instability.
You really have to move away from outdated 32 bit AudioUnits, sorry. Ask the vendors to finally release 64 bit versions, it has been several years since 64 bit is available.

Premiere Pro CC 2014 crash when I Click and Drag

Hi All, I have a problem with Premiere CC 2014 that is driving me crazy!
The issue is as follows:
If I try to drag a clip, sequence, effect or transition anywhere within the premiere, it will crash - with "Sorry, a serious error has occurred" message. The program will crash, quit and the saved recovery project is usually healthy (luckily!). BUT, as soon as I've re-started the program, and reloaded the project - or any project for that matter - the problem persists. As soon as I click and drag, Premiere crashes!
In order to 'reset' this, I have to restart my machine. Once I have done so, I can continue editing as normal for a while (not long, perhaps up to an hour, or so) but eventually, it WILL crash again. I've not been able to work out what I have to do in order to trigger this - it seems random. But once it's happened, only restarting my computer will resolve it - and then only temporarily.
Here are all the facts:
The crash ONLY happens when I drag something... This can include moving a clip on the timeline, dragging a clip form the source viewer or project window, dragging an effect or transition.
The crash happens after I have clicked, as soon as I start to move my mouse.
I CAN click and drag to extend in and out points on the timeline, and I can do 'insert' edit using the button on the source monitor. No crash here.
The footage plays fine.
I am trying this on a CLEAN OS X install, with only Adobe packages installed, to eliminate any potential of interference from other programs. There are no third party plugins or drivers installed. No user data installed either (preferences, photos, documents, etc) - as fresh as it comes!
I am not running Time Machine in the BG
My system is: Macbook Pro 2011, 16GB Ram, 1tb SSD, OS X Yosemite 10.10.1. Intel Graphics card, so no option to turn on or off hardware acceleration. It is set to software only.
I have tested this with projects and footage on an external drive, as well as internal, same issue.
I noticed the issue had started on, or around 25-27th November 2014.
Interestingly, I have noticed that once this crash has occurred in Premiere, a similar problem will occur in After Effects as soon as I drag a file or layer... doesn't matter what the layer is. The crash seems less elegant here, I don't get an error message, it just freezes and I have to 'force quit'. Again, the problem persists until the machine is restarted.
I have been using my macbook and premiere pro cc 2014 on Mavericks for a long time, and had no problems - so I know it should work fine! The only things that changed were an update to Yosemite, I started using Time Machine to make regular backups, I installed a few new fonts and any CC updates that happened in the background... I can rule out most of these because of my fresh install, with no user data, fonts plugins or time machine to confuse matters... It must be an Adobe bug with Yosemite!
Any ideas?
Thanks so much in advance!!

Hi Vince,
vince_email wrote:
...The only things that changed were an update to Yosemite, I started using Time Machine to make regular backups...
Please check this blog post. Updating from Time Machine can cause this issue: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later).
Thanks,
Kevin

Playback has frozen in Premiere Pro CS6, it started when I added some after effects compositions to

Playback has frozen in Premiere Pro CS6. I am running a 1080p timeline and it appeared to start when I added some after effects renders to my timeline. The playback head still runs through the timeline and audio plays normally but the video completely stops and cannot be viewed in real time.
I have plenty of memory and a very good graphics card running 64Bit Windows 7.

Red, yellow, and green render bars and what they mean
http://blogs.adobe.com/premierepro/2011/02/red-yellow-and-green-render-bars.html

Premiere Elements 11 stops responding at Exporter Quick Time Host.Bundle. Can this be fix?

I'm having a problem with my Premiere Elements 11 which has start happening recently. This problem occurs after I sucessfully open & close any of my projects in Premiere Elements 11. After closing Premiere and trying to go back on it when I want to use it again it stops responding when it reaches Exporter Quick Time Host.bundle. I have a OSX version 10.8.4 and QuickTime Player version 10.2. Does anyone know if this problem can be fix?

The footage that's in the project that I'm working on is from 2 different camcorders. One is a Sony DCR SR68 with the video format being MPEG-2 video, AC3 and its resolution being 720 x 480. The other camcorder is a Canon VIXIA HF R10 with the video format being AVCHD and its resolution being 1920 x 1080.
But here's the thing about the Canon camera. I got the videos from each other the camcorders into my computer by just copying the video files into a folder on my desktop. But here's the thing about the Canon camcorder, when I try to copy the videos from this camcorder I had to copy the whole folder which is named "PRIVATE" and the videos in this folder plays on the Quick Time Player.
When I started my project in Premiere Elements 11, I imported all the videos I copy into my computer into my project by going to Add Media > Files and Folders. The videos from Sony camcorder were mpg. and the videos from the Canon camcorder were mts.
I duplicated 2 of the videos from the "PRIVATE" folder by going into Quick Time Player > File > Duplicate. I imported these 2 videos into my project file the same way I did with the other videos. But I deleted the duplicated videos in my Project Asset panel yesterday when Premiere Elements was acting up.
Plus, my Premiere Elements 11 opens up without any stops/not responding because of this whole Exporter Quick Time Host.bundle after I restart my computer. I don't want to keep doing this since it's messing up my work flow. And that's what's going on.

Premiere Pro has stopped working. Windows can't open it

Hi
When I lauch Premiere Pro, I get this error message: "Premiere Pro has stopped working" Then I get this one: " A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
I even uninstalled and re-install the program. but I get the same error. I'm sure this must be an easy-fix for somebody out there. Please help.

There is much more help in that forum http://forums.adobe.com/community/premiere?view=discussions
When you go to the program forum for help, you need to provide a LOT more information
-PPro Information FAQ http://forums.adobe.com/message/4200840
Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
IF YES, read below
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
IF NO, read below
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Premiere Pro has stopped working

Premiere Pro has been working fine everyday since Christmas.
I have made no changes to anything on the Computer, but suddenly this evening I get message every time I try to enter Premire Pro. that Premiere Pro has stopped working and windows is checking for solution, and I am unable to open any of my projects.
I have checked all drivers and gedt messages they are all working correctly.
David Wells

Thank you John for your help
I have a AMD Radeon HD 7570 Driver Version 13.152.0.0
I had already been to their site and run AMD Driver AutoDetect without any luck
I have been using Adobe Creative Cloud for the year since I first purchased this computer, and every programme except Premiere Pro is working OK. I had a similar problem a few months ago after I upgraded from Windows 8 to Windows 8.1 and I then uninstalled Premiere Pro, and deleted the AMD Beta Drivers which I had installed from AMD Catalyst following a recommendation on the Forum, and when I reloaded Premiere Pro everything worked OK without the Beta Drivers, .and although I still received messages Premiere Pro has stopped working some times, until yesterday I had always opened Premiere Pro after a couple of tries.
I was going to uninstall Premiere Pro this morning, but following your E Mail I went back to AMD and thought I would try downloading Beta Drivers from AMD Catalyst and Premiere Pro opened first time of asking.
The joys of Computers, Lets hope it keeps working now
Thanks a lot
David

Premiere Pro CS6 stopped loading correctly - will not load new or existing projects?

It's been about a month since was last editing a project succesfully. When I try to load a new or existing projecet, I get the error message "Adobe premiere pro has stopped working. Windows is searching for a solution..." But there is no solution given, it just closes. I have tried updating my NVIDIA driver with no luck. I am running on Windows 8.1 64 bit. Anyone else have a similar problem?

Thanks for your reply, GautamBahl.
So I did have two graphics cards running, disabled the onboard one and still did not work.
I created a new admin account on my PC, and I am able to create a new project in Premiere now (am not able to while signed into my original account). Since all of my files and settings are on my original Windows account, I would like to get it working on that account. Do my findings give any indication as to how to fix the problem so that I am able to run Premiere signed in to my normal user account?
I appreciate the feedback!

'Premiere Pro has stopped working' during file import

I am on the trial of PP and as soon as i attempt to import a clip, i get a message that Premiere Pro has stopped working and it closes the program.
Here is the message:
Files that help describe the problem:
C:\Users\jchristman.DRACE\AppData\Local\Temp\WER3D30.tmp.WERInternalMetadata.xml
C:\Users\jchristman.DRACE\AppData\Local\Temp\WER567B.tmp.appcompat.txt
C:\Users\jchristman.DRACE\AppData\Local\Temp\WER5718.tmp.mdmp

Hi,
What are the technical Specifications of your computer?
What is the exact version of Premiere Pro that you are using?
Go to File-Project Settings-General and change the Video Renderer to Software Only Mode.
Then Import the file this might help.
Thank You
Arjun

Adobe Acrobat Pro 9 Stops Responding

I work in IT as desktop support for a city. We have a user that is always calling and saying that she cannot open PDF files. What happens is that Adobe Acrobat Pro 9 stops responding and you must go into Task Manager and kill Acrobat.exe. We've taught the user how to do this, because she's been having the issue for apparently 2-3 years.
Here's the thing...
She is the ONLY user in the city (of about 1000 users) that has this issue. She first had Adobe Acrobat Pro 8, so we upgraded her to 9, we have created a new profile on her machine, we have uninstalled and reinstalled, we've wiped her hard drive and started over, and we've given her 2 new computers. Nothing has worked! We just gave her a brand new computer with everything up to date yesterday. This morning she called after about 3 hours of using it saying she's having the same issue.
Considering everything we've done, and that nobody else has this issue, we believe she is causing this issue. But we don't know how. We have never been able to replicate the problem ourselves. This afternoon we are sending a tech to sit with her to watch her and hopefully see if she is doing something that could cause this.
Anyone have any ideas?
Thanks in advance!
-Logan T.

She's a buyer for the city and recieves a lot of PDFs through e-mail. I think that's where most of her PDFs are opened from (Outlook 2007). I'm not sure how many she creates herself. I'm honestly wondering if she even needs Adobe Acrobat or if Adobe Reader would just be fine (she claims she needs it). That will be something the tech can look at today while he is there.
-Logan

Premiere Pro CC stops responding when a clip is imported and altered.

Similar Messages

Maybe you are looking for