Premium payments setup

Hello,
My client pays insurance premium every month, and no invoices are issued by the insurance company.
Please advice on how I may set up the system to make payments to the insurance company, and schedule these payments also.
thanks,

Hi,
You can use the recurring invoices feature for this. Please see How To Create The Recurring Invoices (Doc ID 1938954.1) for a detailed explanation and screenshots for how to set one up.
Regards,
Cheryl

Similar Messages

  • Cross Company code posting is available for recurring payment setup?

    Hi All,
    I could not find the cross company code field for recurring payment setup with useing T code FBD1.
    Vendor is created in paying company code 1000, however, the rent has be booked to cross company code (1001) cost center (2000).
    So, while trying to do recurring payment setup, I could not see the field.
    I know the alternative option that i can use the "Cost Center(1000)" is assigned to CoCd 1000 and do recurring setup without useing cross company code, later i can post the manual journal for correction (as below), however, I do not want use this option.
    Dr/Cr       CoCd                         GL account            Cost Center           Amount
    Dr            1001                         Rent account          2000                      XXXXX
    Cr            1000                         Rent account          1000                      XXXXX
    Please let me know your thoughts on this.
    Thanks,
    Srinivas

    Hi, ok17 is not for cross company,but for CO-FI real time integration.
    Ex. you maintained for "RKL     Actual activity allocation" Dr 123 Cr 567
    Then while posting activity allocation in CO you'll get posting like Dr 123 Cr 567   (with corresponding CO objects)

  • Adobe Web Premium CS4 setup.exe not working (upgrade)

    Just bought and downloaded Web Premium upgrade, extracted with no issue, ran setup.exe and the mouse flickered but nothing happened. No service listed in taskmanager, nothing. After googling a while, I used msconfig to turn off everything possible on startup, mcafee, carbonite, video card GUIs, java runtime, etc etc. rebooted, again nothing. I'm upgrading from Studio8 which installed with no trouble. I'm pulling my hair out!
    I run vista ultimate 32bit, 700gigs free space, 4gig ram, 1gig video card, 2.4ghz dual core intel chip. I also have premiere elements and Photoshop elements package installed (v7) but they installed without a hitch.
    Any suggestions?
    PS: I did read through these forums and was trying to avoid editing my registry etc. When I go into add/remove programs, there is no trace of CS4 (thinking setup was running hidden or something) nor are there cs4 directories created in /programfiles/adobe.

    any input on this? Adobe mail customer support recommended disabling UAC and/or using a new user account... neither worked.

  • Automatic payment setup

    Dear friends,
    I have a requirement to setup Automatic payment with different  comapnys bank account to credit during F110 run.
    Example1 : I have house bank BOA has 2 accounts acct1 currency USD adn acct2 currency USD as well.
                          When paying to vendors, users would like to have a choice some times to pay from acct1 and other times from acct2.
                          As far as I know there is no direct solution for this. If anyone has inputs are appriciated.
       Thanks,
       Balaji

    Hi Balaji,
    You maintain the House Bank in Vendor master, and in your case since it is one house Bank BOA, you can maintain this in the vendor master.
    Now, before running the F110 Payment run, in the last tab Print out/Data Medium, you can maintain variant with your relevant Account ID's and the payment will be made by that Account ID.
    Second Option is to, use Transaction code S_ALR_87001486, where you can maintain Amount just before running payment run.. So maintain amount in only those Banks, from where you want to make payment. If you use this method, you do not need to enter the House Bank in Vendor master.. and use Payment method as the differentiating factor.
    Regards,
    SAPFICO

  • Re: Skype Premium Payment Options

    I have the same problem. I have had a Premium account with yearly payment and can no longer find this option. Monthly payment is too much accounting work. Has Skype no longer yearly payments??
    I would appreciate any advise on this.

    Hello,
    At present the Premium Subscription is only available on a monthly basis. Further announcements will be made shortly.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Auto-Payment Setup

    When I try to set up auto-payment, I am denied, and get the message: We are currently experiencing difficulties with Automatic Direct Debit enrollment. Please try again later. We apologize for the inconvenience. I have been getting this message for the last two weeks now. When I try to set up auto-payment with my gas company and electric company, I've no problems, only with Verizon.

    It is currently 11/13/2014, and I also have been getting this message when trying to update my auto payment settings these past couple of days. It is extremely frustrating being presented with a website which is extremely slow and can't even do anything as basic as let me update my information despite trying 10 times over 2 days. Note to your web developers: cool graphics and loading animations don't mean squat if it takes 5-10 seconds for every page to load and the page doesn't even work after it loads. I would rather the ugliest web site in the world if it means that pages loaded < .5 seconds and I could enter my changes, save, and get out as quick as possible. 

  • Oracle AP Payments - Automatic Payment Setup/Payement Group R12

    Hello All,
    Is there any Process for automatic Payments/Batch Payments in Oracle R12. We are on 12.1.3. Since the  user is making bulk payments by keying manually in Oracle.
    Please help me on this
    Regards

    Hi,
    If you are looking for payment batches, in that cause please refer the below link for conceptual and pratice demonstrations, that migt help you ....
    http://ivruksha.com/index.php?option=com_kunena&view=topic&catid=4&id=78&Itemid=58
    http://ivruksha.com/index.php?option=com_kunena&view=topic&catid=4&id=50&Itemid=58
    Regards,
    Ivruksha

  • TDS Payment Setup based on following

    How do we set the TDS in the SAP B1
    TAX Calculation –
    Contractors
    For Company
    Bill Amount                                             – 100.000
    TDS (10%)                                                -    2.000
    TDS Surcharge(10% on TDS)                     -      .200
    TDS Cess(2%(TDS+TDS Surcharge))         -       .044
    TDS HeCess(1%(TDS+TDS Surcharge))     -       .020
    Total With-holding TAX                                     2.266%
    For Non- Company
    Bill Amount                                             – 100.00
    TDS (10%)                                                -    2.00
    TDS Cess(2%(TDS+TDS Surcharge))         -       .04
    TDS HeCess(1%(TDS+TDS Surcharge))     -       .02
    Total With-holding TAX                                     2.06%
    Edited by: Marc Riar on Feb 19, 2008 10:51 AM

    I have installed the TDS Addon and entered all the data correctly as shown in the Manual like
    1) Company Details - Accounting Tab    2)  In setup - all the masters were defined as per the said example in the manual   3) User - manager were assigned all the data properly as per the said manual. 4) GL Account Determination - Witholding Tax were checked and General Settings - Witholding Tax were checked.
    But when i have gone in BP master - I can only see 2 checkbox - TDS Overlook and Surcharge Overlook.
    In my BP Master - Subject to Witholding tax Checkbox is not visible and even WT code allowed is not visible
    In Item Master - General - Checkbox - WT Tax is not visible.
    What could be the reason ?

  • Apple ID Payment Setup

    I don't know why I can't seem to setup my account with my credit card so I can buy apps and other thing. Any suggestions on how I could fix this???

    You will need to explain what issue you encounter in order to offer you some solutions. Otherwise we have no idea what may be the issue.

  • ITunes payment setup

    Hi,
    I'm currently overseas, reinstalled iTunes on my Laptop and want to change my credit card I'm paying with.
    Now iTunes tells me I cannot set it up cause I'm in iTunes Belgium (I'm currently in Belgium) but I am from the U.S.!!
    What can I do? Help!!
    Message was edited by: sinapp - typo...

    You've set the iTunes Store for the US one? Check the round flag icon at the bottom-right of the iTunes Store window. If it's not showing the Stars and Stripes, you're in the wrong country's Store. Click the icon and select the US.
    Note that the terms of use for the iTunes Store prohibit using the US Store from outside the country. Though I'm not aware of any technical measures in place to prevent such use, some people have reported problems when attempting to use a given country's iTunes Store from outside the country, so there may be IP address filters or other such measures in place. If so, you're out of luck.
    Regards.

  • Wireless Setup for HP Officejet Pro 8500A Premium not working

    I get this msg when I attempt to click on anything within the HP OJPro 8500A Premium wireless setup menu when it redirects from my Windows 7 network map.   I have a question mark icon with "unknown" where the printer should be on the network map and down below there is the statement "The following devices cannot be placed in the map" with the HP OJPro 8500A Premium icon shown.   Then when I click on the Printer icon it takes me to the HP HP OJPro 8500A Premium Embedded Web Server site.   When I click on the Wireless Setup Wizard or Advanced Wireless Option I get this message:
              An error occurred during a connection to fe80::d685:64ff:fe34:b3d.
    You have received an invalid certificate.  Please contact the server administrator or email correspondent and give them the following information:
    "Your certificate contains the same serial number as another certificate issued by the certificate authority.  Please get a new certificate containing a unique serial number.
    (Error code: sec_error_reused_issuer_and_serial)
    The page you are trying to view can not be shown because the authenticity of the received data could not be verified. Please contact the web site owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site."
    Any help would be appreciated.

    Hi rjbarnar,
    I see you are getting an error on your HP OfficeJet 8600 when trying to connect it wirelessly to your network. Can you please let me know the Exact model of 8600 you are using as well as the current Operating system?
    If you have the base model of 8600 the N911a and are running Windows XP or Higher (Vista, 7 or 8) I would like you to go ahead and update the Firmware of the printer:
    HP Officejet Pro 8600 N911a Firmware
    Before starting the upgrade:
    The HP Officejet Pro 8600 Firmware flashing (upgrade) requires a wired network or a USB connection.
    DO NOT upgrade the printer firmware in a wirelessly connected printer.
    If the computer has a firewall installed or enabled, it may block the Firmware Download Utility from accessing the printer. Therefore, please remember to temporarily disable any firewall that may be on the computer, including firewalls such as Microsoft Windows XP Firewall, Sygate, Zone Alarm or BlackICE.
    Please click on the How to install tab when on the download page and read all recommendations and the process before installing.
    If you are using a different model of 8600, please reply back with that information.
    Thanks in advance,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Questions on Electronic payment in Payables

    Hi,
    Please explian the Electronic payment setup in oracle Payables r12.
    Regards
    Abhijit

    Hi Abhijit,
    You can pay your suppliers electronically by using either the Oracle EDI Gateway or by delivering to your bank an electronic funds transfer output file that Payables creates.
    Creating Electronic Funds Transfer Payments without the Oracle EDI Gateway
    To create an electronic funds transfer (EFT) payment file that you can deliver to your bank, you follow nearly the same steps as in creating checks in a payment batch. However, instead of printing the checks, you send a softcopy file of formatted payments to your bank so it can disburse the payments directly into each supplier's bank account.
    Prerequisites
    You are not using the Oracle EDI Gateway for this payment batch.
    If you are not using a payment file format provided by Payables, customize and register an EFT Payment Program, and create or customize, and register a remittance advice program. See: Automatic Payment Programs, and Setting Up Custom Payment Programs
    Define a payment format with the Electronic payment method that references your EFT payment program and remittance advice program. See: Payment Formats.
    Use the Banks window to define the remittance bank accounts and payment documents you use to create EFT payments. In the Payment Documents window, assign your EFT payment format to the payment document. Enter Computer Generated for the Disbursement Type. See: Defining Banks.
    Define the suppliers and supplier sites that use the bank account to receive electronic payments. See: Entering Suppliers.
    Enter bank information for each supplier site you want to pay. See: Entering Supplier Bank Information
    When you enter the invoices you want to pay, enter Electronic as the payment method.
    Approve the invoices you want to pay and confirm that they have no active holds.
    Creating Electronic Payments with the Oracle EDI Gateway
    To create an electronic payment file (820/PAYORD, REMADV) that Oracle EDI Gateway formats and transfers to your bank, you follow nearly the same steps as in creating checks in a payment batch. However, instead of printing the checks, the EDI Gateway formats the payment data in the EDI outbound payment format. You can then use the EDI translator to transmit the formatted payment data to your bank for disbursement. For more information, see: Outbound Payment Order / Remittance Advice.
    For each scheduled payment that you pay with the Electronic payment method, you enter the supplier's remit-to bank account. If you enable the Allow Remit-to Account Payables option, you can override the default primary bank account and enter another bank account for the supplier with the same payment currency. If you do this, you can create EDI payments for more than one bank for different scheduled payments on the same invoice.
    Refer to :http://docs.oracle.com/cd/A60725_05/html/comnls/us/ap/eft.htm
    Thanks,
    Shikha

  • Problem Reversing a Credit Card Payment

    I am having a problem reversing a Credit Card payment. Here is the the steps tha led up to the probplem:
    1) Applied Payment to an Invoice, paying the total of the Invoice using the Payment Means of Credit Card
    2) In Deposits, selected the Credit Card tab and selected the Payment to be deposited and Updated the Deposit.
    3) Brought the updated Deposit up, Clicked Data, selected Cancel and Canceled the Deposit.
    This worked well
    Here is were I have a problem
    4) Brought the Incoming Payment that was deposited and then had the deposit Cancelled, clicked Data and selected Cancel,
    when prompted for Transaction Cancelation date, first selected Origional Document date,  then selected CUrrent System date,
    but received the same message "Can Not Cancelled.  One of Credit Vouchers was cashed".  
    I tried to reverse the Transaction the same day it was orrigionally applied.
    Any odeas why I can not reverse a credit card payment BUT if I selected Check as the Payment method,  I am allowed to reverse the Check?
    I am currently running SAP B1 2007 SP00 PL47
    Thanks In advance!!!
    Dana

    Hi,
    Julie is correct. The setting is found in Admin/Setup/Banking - Credit Card Payment - Setup window. The "Payment After" field (Days/Month) is what determines whether the payment may be cancelled/reversed. Once the number of days/months indicated have passed, you cannot cancel the incoming payment transaction.
    Heather

  • Payment wizard set up

    Hai,
    I have a problem relating to payments made to multiple vendor. I have tried by using payment method set up in Admn>Setup>Banking>Payment method setup and by using payment wizard. It is coming correctly but it is making as individual entry for each vendor as below ;
    Vendor A          1000
    To Bank                     1000
    Vendor B          5000
    To Bank                      1000
    I need the entry as below :
    Vendor A             1000
    Vendor B             5000
    To Bank                         6000
    ie., Bank should be debited as a whole . Is there any settings to be made in payment setup or is there any other way to solve this issue.
    Can anybody help as this is urgent.
    Regards
    Narayanan

    Narayanan,
    The Payment Wizard is a method to process mutiple payment at one time but its base behaviour does not differ from processing an individual outgoing payment.
    Therefore, the Jounal posting are going to be individual and not 1 JE as you are expecting.
    I do not believe there is any setting to do this
    Suda

  • Payment batch Set

    Hello,
    Does anyone know how to create a Payment Batch Set in R12? or where the Payment Batch Set and payment groups from 11i migrated?
    The batch sets in 11i did not migrate
    I checked in Payment setup but there is not place for paygroups or Payment batch sets.
    Thank you
    Paul
    Edited by: user7760954 on Sep 14, 2010 2:38 PM

    Pl see if these MOS Docs can help
    Error FRM-40010 Trying to Open Payment Batch Sets Form (APXPBSET) After Upgrade to R12.1.1 (Doc ID 1069087.1)
    R12 Payment Batch FAQs          (Doc ID 579383.1)
    R12 Payment Process Request - Functional and Technical Information          (Doc ID 821133.1)
    HTH
    Srini

Maybe you are looking for