Preserving configuration settings in the configuration copy

Hello,
Does anybody know how to copy Project Configuration preserving all configuration settings for each mapping in the project?
I have about 30 mappings and each mapping has hints for parallel execution. I need to have a copy of the configuration with parallel hints to load a different schema. I have tried to use copy and paste the configuration, but the configuration copy has lost all parallel hints. It is not a show stopper, but I would like to avoid manual settings in the future as much as possible.
Thanks
Vlad

Unfortunatley this is a, 'it depends' question. If your business requirements are such that you need to easily change a configuration via standard tools, e.g. you're hosting an Azure web site, then config file is a great choice. If you have an architecture
where the settings differ depending upon a user login then a database might be a good solution. If your architecture uses security zones then the less you put in a less secure zone the better. Sorry, but, "it depends" is the best I can offer.
http://pauliom.wordpress.com

Similar Messages

Customisation settings for VC Configuration copy from Purchase order to GRN(Goods Receipt note)

Hi Experts
I was looking for Customisation settings for VC Configuration copy from Purchase order to GRN(Goods Receipt note),
Please share.
Regards
Sandeep

Hi Ritesh
Thanks for your reply,
I checked both of these transaction we need to select 3 option Characetrstics frm configuration(prio) and classification. I will check that, I had one more question
In PO VC configuration is called for class type-300 and in GRN VC configuration is called for class type -023. How it will fetch the variant class configuration to Batch class configuration?
Once we had faced some issues the copy from PO to GRN was happening for some batches & some batches it was not happening.
yes we have activated Mill Functions in our ERP box.
Regards
Sandeep

The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly

I have a 2 server SharePoint farm.
All outgoing emails were working fine.
I just restarted both servers and now after that none of the emails are being sent. I am using OOB publishing workflow and it shows message:
The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Even if I setup Alert on some list, it doesn't send email.
I have checked that outgoing email setting in CA is defined and like I said it was working fine without problems but after restart it is showing error.
What could be the cause of this and how to fix it?
EDIT
I removed outgoing mail server in CA, added again and restart IIS but still emails from OOB workflow is not being sent. But email from Alerts are being sent. Don't know what to do now.

This is really weird, It works when an alert is set but workflows doesn't send emails... Can you create a simple 1 Step workflow in SPD to send an email when a specific field is set. See if this sends an email..
AJ MCTS: SP 2010 Configuration MCSA: Windows 7 If you find this post useful kindly please mark it as an answer :) TY
I created a test workflow which sends email to user and it is also not sending email. But I am getting email from SharePoint regarding "variation" page changes as well as alerts which I told above.

You may need to configure the connection settings in the deployment descrip

Hi All
I am new to BPEL and going through Order Booking Tutorial (using 10.1.3.4 version of opmn ) .
I have a problem in 'Designing the Database Adapter to Insert Data' Chapter.
I have installed Oracle 10g Express Edition and BPEL Process Manager on my local system.
In the Example it has been asked to create a daabase connection with Third Party JDBC Driver. Instead I have created a database connection with Oracle(JDBC) Driver.So i didnt have to register any third party driver.
I cud access the Order/OrderItems table as well .
I Deployed the same on the server.But while running the process I get following error--
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
nested exception is:
     ORABPEL-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore. [Caused by: Listener refused the connection with the following error:
ORA-12519, TNS:no appropriate service handler found
The Connection descriptor used by the client was:
localhost:1521:XE
See root exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml) and restart the server. Caused by Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.4.0) (Build 080602)): oracle.toplink.exceptions.DatabaseException
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I have checked several post on this error but every post talks about third party database.I have used Oracle Database only so why/What shud I change anything in oc4j-ra.xml?? This is my doubt .
Pls help me on this .Also Let me knowe in my case is there any need to create the datasource.?I am low at concept of database.
Pls help
Regards
Naveen

Hi
I am trying to insert orader and order Items as given in the Order booking tutorial..
Here are the files description
.wsdl file looks like
<service name="DBInsert">
<port name="DBInsert_pt" binding="tns:DBInsert_binding">
<jca:address location="eis/DB/MyConnection"
UIConnectionName="MyConnection"
ManagedConnectionFactory="oracle.tip.adapter.db.DBManagedConnectionFactory"
mcf.DriverClassName="oracle.jdbc.OracleDriver"
mcf.PlatformClassName="oracle.toplink.platform.database.oracle.OraclePlatform"
mcf.ConnectionString="jdbc:oracle:thin:@localhost:1521:XE"
mcf.UserName="system"
mcf.Password="6672B62098892995C8B651EFDF798A59"
/>
</port>
</service>
data source file looks like
<connection-pool name="MyConnection">

<connection-factory factory-class="oracle.jdbc.OracleDriver" user="orabpel" password="->pwForOrabpel" url="jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=on)(ADDRESS=(PROTOCOL=tcp)(HOST=nakhanna)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=XE)))"/>
</connection-pool>
<managed-data-source name="MyConnection" connection-pool-name="MyConnection" jndi-name="jdbc/MyConnectionDS"/>
</data-sources>
oc4j-ra.xml looks like
<connector-factory location="eis/DB/MyConnection" connector-name="Database Adapter">
          <config-property name="xADataSourceName" value="jdbc/MyConnectionDS"/>
          <config-property name="dataSourceName" value=""/>
          <config-property name="platformClassName" value="oracle.toplink.platform.database.Oracle9Platform"/>
          <config-property name="usesNativeSequencing" value="true"/>
          <config-property name="sequencePreallocationSize" value="50"/>
          <config-property name="defaultNChar" value="false"/>
          <config-property name="usesBatchWriting" value="true"/>
          <connection-pooling use="none">
          </connection-pooling>
          <security-config use="none">
          </security-config>
     </connector-factory>
##################################################################3
Still I get the same error .
<bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>null</code>
</part><part name="summary"><summary>file:/C:/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_FulfillOrder_4.0_e77c64251e45eb4711a3a093f92e6a86.tmp/DBInsert.wsdl [ DBInsert_ptt::merge(OrdersCollection) ] - WSIF JCA Execute of operation 'merge' failed due to: java.util.MissingResourceException
java.util.MissingResourceException
; nested exception is:
     ORABPEL-00001
java.util.MissingResourceException
java.util.MissingResourceException
java.util.MissingResourceException
</summary>
</part><part name="detail"><detail>null</detail>
</part></bindingFault>
Pls let me know if something looks wrong in the above files
Thanks
naveen

How do I configure the brightness, contrast and colour settings of the built-in HD Camera on iMac?

I have recently purchased an iMac after making the switch from PC.
I am struggling to find an app, or settings configuration where I can modify the brightness, contrast, color and white balance settings for the built-in HD camera. The online manuals didnt give me any answers so I thought I would turn to the communities pages for some help.
The room where the iMac is situated has a light behind me and I am facing the wall so not much light in front of me except the ambient light from the screen. Friends on FaceTime, Skype etc. say that the picture from the built-in camera is too dark and difficult to make out my face clearly. How can I fix this?
Any and all help is most welcome.
Thanks
UKRichard

I would move it if it weren't the main room light that is fixed to the ceiling. Not remodelling my house just for the iMac camera. On my old PC all the webcams came with utilities to adjust these settings, I am surprised Apple dont have something similar for free.
I did see another post about iGlasses here, but not sure I want to pay $10 just to adjust my camera settings
Message was edited by: ukrichard

The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.

Hi,
I have SP 2013, and it was working properly. and workflows send emails perfectly. yesterday, i decided to build a fresh site collection so i deleted the old one and created a new one. now, workflows are unable to send emails. i'm sure it has nothing to do
with my mail server cuz no changes happened to it. i'm sure about the settings for outgoing mail on central admin. all i did, was to enter mail server IP in outgoing mail field and email below it.
in the workflow status the status says "error" followed by this message: "The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly."
Any help please?

Hi,
According to your post, my understanding is that you failed to send email after building a fresh site collection.
I recommend to verify that you have entered your SMTP server name correctly.
You can add it as FQDN e.g. ServerName.DomainName.
Here are a similar articles for your reference:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/f0605f59-0baa-49c9-854e-0fb369a9e5a0/cant-seem-to-get-emails-to-send-in-sharepoint
http://alpesh.nakars.com/blog/sharepoint-outgoing-email-issue/
Best Regards,
Linda
Linda Li
TechNet Community Support

The email message cannot be sent. Make sure the outgoing email settings for the server are configured properly

i have an issue when loading a workflow. it gives me a following error "The email message cannot be sent. Make sure the outgoing email settings for the server are configured properly". it doesnt send me any alerts and worlflow fails at the end
with the above error message.

Hi,
I agree with Bistesh. But after Outgoing e-mail settings are configured properly, if the issue still exists,
It may result from your Anti-Virus. Please refer to the following steps:
Open MCAfee Console and go to Access Protection window.
Click Anti-Virus Standard Protection and edit “prevent mass mailing
worms from sending emails” rule.
Now we need to know which processes are being blocked therefore we need to check the MCAfee Log located at
C:\Documents and Settings\All Users\Application Data\McAfee\DesktopProtection\AccessProtectionLog.txt
you may find entries of DtExec , DtExecUI and DatabaseMail90, now these processes need to be entered in the exclusion list of selected rule .
Reset the IIS And SharePoint Timer service to check if this works for you.
Here are some similar issues with you, you can use as a reference:
http://social.technet.microsoft.com/Forums/en-US/667f0d61-4914-43fa-80c1-8cf430b113bb/workflow-email-not-working-but-normal-email-alerts-working-fine?forum=sharepointgeneralprevious
http://techsuite.wordpress.com/2008/12/08/workflow-history-the-email-message-cannot-be-sent-make-sure-the-outgoing-email-settings-for-the-server-are-configured-properly/
Best Regards,
Lisa chen

How to configure a test sever with the system copy with prd data

Dear All ,
I need to configure a test sever with the system copy with prd data.
Please any one can suggest the step by step process to do the same configure and system copy.
Regards
kumar

Dear All,
I am facing problem in system copy. I want to knoe the way after restore i can move all the data and server data in one drive .
Now the error is resolve by changing the initTAT.sap the value tape to disk but now stuck in the drive for restore it is asking which is not there at os level.
BR0252E Function mkdir() failed for 'M:\oracle\TST\SAPDATA4\PRD33' at location
BrDirCreate-1
BR0253E errno 2: No such file or directory
BR0252E Function mkdir() failed for 'M:\oracle\TST\SAPDATA4\PRD32' at location
TO solve the above problem i have created ad network drive for this but once all the restore will be completed than how i can i move the data form network drive to on drvie.
Please suggest
Regards,
Kumar
Edited by: kumarmoh on Jul 21, 2009 1:43 PM

The Java load in database SID / hostname has not been configured yet. You cannot run an installation from the System Copy folder with this load

Dear Gurus,
We are facing the below issue when performing a homogeneous system copy of NW 7.0 system using backup/restore method for DB6 system.
The Java load in database <SID>/<hostname> has not been configured yet. You cannot run an installation from the System Copy folder with this load.
We went through the SAP Note http://service.sap.com/sap/support/notes/2049842, and followed the same but no luck.
We updated the Kernel to the latest, but still no luck.
Request for your quick help as we have to complete it by EOD today.
Thanks a lot in advance.
Best Regards,
Anuj

Hello Ashutosh ,
Thanks for your reply.
We have gone followed the below sequence:
SCS Installation
Database Instance Installation using backup/restore method
CI installation. -> getting error, when we provide the Java Components DVD.
Best Regards,
Anuj

I have an ut ipad 2 with no configuration for the i cloud. I have follow the instructions of synch the ipad with itunes v 10.6 in my pc, but i can not get the display of the cloud icon in the general settings of the ipad. appreciate any help

I have an ut ipad 2 with no configuration for the i cloud. I have follow the instructions of synch the ipad with itunes v 10.6 in my pc, but i can not get the display of the cloud icon in the general settings of the ipad. appreciate any help

I'm asking because ios5 introduced iCloud. You have to have updated to ios5 to see it.

HT1338 i just installed unifi- i then bought a repeater uplink- TL-WA901ND- unfortunately i have been unable to connect/configure the settings to the repeater

i just installed unifi- i then bought a repeater uplink- TL-WA901ND- unfortunately i have been unable to connect/configure the settings to the repeater

Can you get any other wired client to access the Internet when plugged into the AirPort's LAN port? Just not your Win7 laptop? What IP addresses are being assigned to your laptop when connected?
I also tried Extending my wireless network using the Express, but get the error 10057 every time.
Sorry, but this won't work as the Apple routers basically can only extend other Apple routers.

How to fix "The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly."

Hi All,
I have move dev to production, then workflow facing "The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly". Actually it is working fine in dev, in production mail not going. How to fix
this issue?
Thanks in advance!

make sure your outgoing email settings are correct and also make sure servers are in exchange rely if you are using exchange.http://sharepoint.stackexchange.com/questions/35353/how-to-handle-e-mail-message-cannot-be-sent-error
check below blogs: http://www.chrisbuchanan.ca/Blog/Lists/Posts/Post.aspx?ID=2
another option to put pause in right place:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/6e848a25-019d-4220-aff6-c535da933e0f/the-error-message-in-workflow-history-the-email-message-cannot-be-sent
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

[svn:osmf:] 14595: Metadata refactoring revision: having LayoutMetadata return a NullMetadataSynthesizer so that child layout settings do not get copied to their parent .

Revision: 14595
Revision: 14595
Author:   [email protected]
Date:     2010-03-05 01:25:04 -0800 (Fri, 05 Mar 2010)
Log Message:
Metadata refactoring revision: having LayoutMetadata return a NullMetadataSynthesizer so that child layout settings do not get copied to their parent.
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/layout/LayoutMetadata.as

I've only encountered two instances where the PUT operation failed on certain files. One, the server does not like the particular file type, and two, when the file was open in another program.
Other than that, I could only guess that it may have something else to do with the web server configuration and not DW.

HT4864 When trying to update my Mail Account Mailbox Behaviours settings, when I try to close the settings pane the following messages occur: Invalid Incoming Mail Server The "Incoming Mail Server" field cannot be empty. The incoming mail server box has p

When trying to update my Mail Account Mailbox Behaviours settings, after making the changes when I try to close the settings pane the following messages occur: Invalid Incoming Mail Server The “Incoming Mail Server” field cannot be empty. The incoming mail server box has in light grey colour: p02-imap.mail.me.com in it and I cannot edit its content. Any ideas what is going on and how to fix it?

Hi all,
Mattreichenbach is probably on the right track here with a reset of settings. I think I've determined the issue has to do with cached account information and inconsistencies for the account name. This seems to crop up when I've changed my password and it hasn't propagated fully to all the servers, devices, certificates, etc.
Hopefully many here are on their way to restoration of service by now but it's clear that a lot of people are having the same issues. Very frustrating and definitely something Apple needs to resolve: incoming mail server field grayed out, incorrect autopopulation of different fields, other unanticipated behaviors. If you're still having issues, though, here's what worked for me...
First, head to the iCloud preferences pane in System Configuration and choose "Sign Out". When I did this it prompted me with a number of "are you sure" type questions about retaining information on my local machine. I chose to delete/remove the info each time simply because it should all be restored by the cloud and I didn't want to risk a massive duplication of my data... I will say, I'm back up and running with no issues so I suspect you can make the same delete/remove choices... But use your own judgment. I don't want you to lose any data (ie.. please use care as you do this because I cannot bear the thought of causing anyone to experience the pain of data loss).
Once you've signed out of iCloud, restart your system. When you get back in, head to the Mail, Contacts and Calendars section of your System Preferences and add your account back by choosing the brushed aluminum "iCloud" button. When it asks for your account name, use your @iCloud.com email address. I am all but certain my issue had started because one of my devices (iPhone or whatever) had been set up with an email alias specified instead of my @iCloud.com address.
Apple, if you're reading through any of these issues (there are TONS of users having this same problem). Take note, that your icloud service somewhat frequently is not responding and yet tells the user that the password is wrong and this prompts people to be changing their passwords unnecessarily. This has happened to me on numerous occasions. Also, I noticed that last week's outage corresponded to a VERY similar outage exactly one year ago to the day. Sounds like planned maintenance to me and I think you could do a better job notifying folks so we're not wasting HUGE amounts of time troubleshooting a problem that we have no hope of fixing.
Hope that helps some of you!
Terry Mullane
Washington, DC

Why should Adobe Reader fail to print because of settings in the Edit/Preferences?

AdobeReaderDocumentCouldNotPrint.txt
Glyn Price Tue 17 March 2015
Why should Adobe Reader fail to print because of settings
in the Edit/Preference?
Adobe Reader XI Version 11.0.10
MS Window 7
File > Print > Print
I got the error message:
The document could not be printed
I googled this error message and used the following
solution that worked i.e. it then printed successfully.
Edit > Preferences
Category: Security(Enhancement) 'Enable Protected Mode at Startup'
It was checked, changed it to unchecked.
Category: Documents 'View documents in PDF/Mode'
It was set to 'Only for PDF/A'
Set it to 'Never'
Exited Adobe Reader and restart it. Then it printed.
I had a look on another computer system (Adobe Reader XI Version 11.0.10
and MS Window 7) and on this different computer I could print
without doing the above two changes.
I'm a bit puzzled. Why preferences on one system were not
needed on a different system?

Here is an elaborate method of troubleshooting this problem. There may be a simpler method if anybody wants to suggest one.
There is a general technique that is helpful in this situation. I can't give you complete instructions here, and I haven't tested this with regard to bluetooth devices, but here's the gist of it.
Create a second log-on account for your music projects. Configure it so that when you log in to the new music account, the drivers needed for the Bluetooth devices don't load. You do this in System Preferences: Accounts.
When it's time to do music, log out of your usual account and onto the new one.
When you install drivers for any peripheral, you have the option of installing them "for all users" or only for the user account that is active during the installation.
This governs whether the drivers go in root/library or root/Users/your name/library.
If drivers are in root/library, they will load whenever the Mac is booted up and will run for all users.
But if drivers are loaded in root/Users/your name/library, they will only load if you log in as "your name". If you have a second account called root/Users/music account/, and you log in under that, the drivers in "your name" will not load. Get it?
To get this working right you need to be knowledgeable about moving or deleting files in the /library/ directory and subdirectories, and you need to be careful because you can unwittingly cause some damage if you are not careful.
There is also the root/System/library directory, and in general you should never mess around with anything in there or you might hose your system.
In summary, I would start by using the installer programs for your BlueTooth devices and DE-installing all drivers. Reboot. Log back in as your usual user account. Then RE-install each driver and see if the installer program gives you the OPTION to installl for all users or just for this user. Choose the latter. Then log on to your new Music account and see if the problems go away.

Preserving configuration settings in the configuration copy

Similar Messages

Maybe you are looking for