Previous frame without resetting

As2
How do you go back to a previous labeled frame and have that fame the same as you left it without it resetting that frame.
I really want the x y positions of a MovieClip to stay where I moved the MovieClip to previously so I can go back to it.
These did not work because of resetting.
_root.prevFrame();
_root.gotoAndStop("here");
_root.gotoAndPlay("here");
I could only pick one place and not what I wanted.
_root.mc._x=224.9;
_root.mc._y=124.5;
I been stuck on this for a long time and would really appreciate some help on this.

What is in the frame that causes it to revert to some other condition?  If you need to have the position of the object retained, then you need to assign it when you enter that frame, otherwise it will return to whatever the timeline condtions defined for it.
Normally to have something not change when you enter a frame you need to implement conditional logic that says if(something) { make it so }

Similar Messages

  • I have an Iphone 4 which I just updated with the latest software, which put in it in Recovery Mode. It has the picture of the plug with Itunes, I downloaded it now its saying its in Recovery Mode, how do I save all of my previous data without Restoring?

    I have an IPhone 4 which I just updated with the latest software, which put in it in Recovery Mode. It has the picture of the plug with ITunes, I downloaded it now its saying its in Recovery Mode, how do I save all of my previous data without Restoring?
    I updated the phone before backing it up on iTunes, now the update wanted me to connect the phone with iTunes and it says the phones in recovery mode and it must be restored before its used with iTunes. I go to click restore and it says it will reset it to factory default and I'll lose all my current data. I have all my sons pictures and videos along with this notes. I can't lose all of this data! Please help!

    You have to restore the iPod, no ifs, ands, or buts...
    After iOS is installed you will be asked if you what to set it up as a new iPod or if you want to restore from a backup.
    If you have a good backup you can restore that and you're good to go.
    If you don't have a good backup, then you end up with a "clean" iPod....

  • Left Arrow "Goto Previous Frame" Not Working in Projects

    When trying to navigate around the timeline in a project, I can press the "Right Arrow" key on the keyboard to navigate to the next frame in the timeline from the playhead.  When I try and press the "Left Arrow" key to navigate to the previous frame, the project is de-selected and the selection jumps up to Macintosh HD above the project (or if editing a project on another drive, it jumps up and selects that Drive).  Pressing the left arrow key again collapses that Drive and all the projects on it are hidden.
    I can skip 10 frames in either direction just fine by pressing Shift-Left or Shift-Right, but for some reason cannot skip backward frame by frame without the project being de-selected.
    If I choose a clip in the Event Library, I am able to navigate frame by frame either direction just fine with the Arrow keys - it only seems to be a problem in an actual project.
    Any ideas?
    Thanks!

    When trying to navigate around the timeline in a project,
    Is this really in the timeline, or in the Project Library? It sounds like you're in the Project Library. In there, yes that's the way the arrow keys work. They're used to navigate through projects and folders. Event Library works the same way.
    After the drive collapses with the left arrow, you can use the right arrow to open it. If you want to slow play through the project hold K and L. If you want frame by frame inspection, hold the K key and tap the L key. Or open the project into the timeline panel.

  • Duplicates of a song on iPhone 4s but not in iTunes. Unable to delete duplicate. Won't play and won't let you swipe to delete. Any ideas on how to do so without resetting the phone?

    I have duplicates of a song on an album. One of the duplicates is grey with no album cover. When you attempt to swite and delete, the track will not delete and will not even play. I've contacted iTunes store and the person I received the support email from told me that it may not be downloaded. I emailed him back and explained that no there is no download for that song in my itunes store on my phone.
    One I never received an answer back which shows you how well these people do their job.
    Two: I really would prefer to have a solution to this problem without having to delete all of my music from my phone or resetting my phone. Because this duplicate isn't even showing up in my iTunes, it's only showing up on my phone.
    When I attempt to find it in my itunes it plays fine. But when I try to find the file to delete it, it is no where to be found. I've tried everything that I could think of to get rid of it. And I don't want to leave the album/artist off my phone because I do enjoy their music... And I have the microsoft sync in my car.
    Anyone got any ideas on how to do this without resetting the phone and/or taking my music off?

    If you have all your music on the cmputer then i would connect up my phone uncheck the Sync Music option and apply.
    This should take all the music off your phone .Then you can resync the music back on to it.
    If this doesn't work maybe a restore to factory settings and start from scratch is the way to go

  • I downloaded a movie using my Ipod touch on my Ipod touch and I guess I rushed through so fast that it glitched up but I would like to find a way to fix it without reseting it. I can see that the movie is in videos but it is not in my purchases

    I downloaded a movie on my Ipod touch useing my Ipod touch and I guess I was rushing through the download prosess that it glitched up but I would like to fix it without reseting it. I can see the movie in my videos but it is not in my purchases and now I cant even view it it says I dont have permmision to access it and it wont let me delete it by sliding my finger accross it. Help

    Movies are not one of the items you can reload via iClould like apps, music, and some other items.  You can contact iTunes and request a redownload,.  They may give you one.
    How to report an issue with Your iTunes Store purchase

  • How can I transfer my old information from my old iCloud account to my new one without resetting my phone and having to use my old account?

    How can I transfer my old information from my old iCloud account to my new one without resetting my phone and having to use my old account?

    What is wrong with your old iCloud account?

  • My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?

    My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • How do i reset my laptops permission without resetting my admin password?

         Listen, I have a school laptop and ofcoarse they have put their own tweaked operating system on their that blocks me from accessing different parts of my laptop and opening any third party apps. As any mac person like myself I have worked my way around the permissions by using a 'ksadmin' file in a particular MacOS folder. You would think now that I have worked this out why would I need to reset my permissions. Well it's because I cannot drag anything into the applications folder and there are some games and files that the 'ksadmin' will not run. The purpose of the 'ksadmin' file is to trick the containing folder that I am actually an administartior of this laptop. So could someone please tell me how to reset my permissions without resetting the admin password. If i reset the admin pasword (I have before) they will find out!
    Thanks
    Daniel

    Then, I'd give it back to them and insist on one with the factory-provided OS. Barring that, put a bootable backup/clone onto an ext HD, boot into recovery mode, wipe the drive, and restore the OS. That will be Apple's nonbutchered OS. Then, on first boot use the Setup Assistant to migrate from the backup/clone.

  • Monthly TPM1 without reset for FX forward in Hedge Accounting

    Hi,
    I would like a clarification on the "standard" way of resetting the valuated position of an FX forward (using Hedge Accounting position management procedure) when using TPM1 and the "mid-year valuation without reset" option.
    When executing TPM1, the typical postings for an FX forward consist in:
    - debiting or crediting the G/L balance sheet account representing the FX deals position
    - against the OCI interim account
    - then to further classify the OCI interim account to OCI and P&L
    When reaching the deal maturity, balances exist consequently on following accounts:
    - B/S account for FX deals position
    - OCI (unrealized)
    - unrealized P&L
    When posting TBB1, a new B/S acount (FX flows reconciliation) is debited and credited with the incoming and outgoing flows of the FX.
    When posting TPM18 subsequently, following postings are done:
    --> REVERSAL OF UNREALIZED:
    - OCI (unrealized) is reversed (in custo, the position management procedure mentions that 'With Reset' of classification flows must be used when realizing the deal)
    - P&L (unrealized) is reversed
    --> POSTING OF REALIZED
    - The FX reconciliation account (the one posted with TBB1) is posted with the realized gain or loss
    - against the OCI interim account
    - the the OCI interim is further classified to OCI and realized P&L
    At the end of the HR, the OCI (realized) is reclassified to realized P&L if needed (THM10).
    As you understand, the B/S account representing the FX deals position that was initially posted with TPM1has never been reversed while the deal has been realized and the position should be closed. In fact that's the only account that remains open (has a balance) at the end. Why is it so? How is it supposed to be offset when using the 'no reset' procedure of TPM1.
    In table TRLV_TRANS_POS for the deal, I see that everything has status posted except 2 records: flow types OTC001 and OTC002. These remain in status scheduled. Is the issue related to that?
    By the way, we investigate the 'no reset' procedure because the 'with reset' option prevents TPM18 from working afterwards. I saw an OSS note for this but it is huge and we would like to avoid implementing it.
    Thanks for advices.
    Regards,
    Christophe.

    Hi Christophe,
    I left the thread open for some possible hints from others, but I believe your question was answered by Rudolf through the SAP Support message. Here his summary again:
    the valuation togehther with classification works in two possible ways:
    1. valuation without reset + reset of the unrealized OCI and P/L
    at the maturity of the deal the valuation is reset with the derived business transaction. the derived business transactions can distinguish between asset and liability accounts. It has to be setup in the position management procedure. The classification reset the unrealized OCI an P/L and posts new relalized classification.
    2. valuation with reset + reset of the unrealized OCI and P/L
    in this case every valaution is reset (usually on the next date) and the corresponding classification is reset as well. At the maturity no reset of the valuation is necessary and same is valid for unrealized OCI + P/L.
    We do not support scenario where valuation with reset is used but the corresponding classfication is not reset together with the valuation.
    BR, Tomislav

  • After a few minutes on certain websites, firefox stops drawing new frames without a mouse movement to force a redraw

    After having certain pages open for between 5-15 minutes (at the most) such as youtube, facebook, or myspace (these are the sites that consistently cause it, but are not limited to them.) The browser no longer draws new frames without the mouse being moved and calling the draw function through it.
    The issue started a month or two ago. There had been no new plugins or add-ons installed for at least another month prior.
    The closing X in the top right also becomes non responsive (though it will light up.) The browser can be closed through the right click menu in the task bar, along with the closing X in the thumbnail preview.
    Program and window completely freeze when attempting to move the window for around 10 seconds, then move to the location designated.
    Other browser have no issues.
    system: Windows 7 Ultimate 64 bit.
    6GB RAM 1600Mhz
    core i7 920
    1.5TB free space in C drive
    currently installed plug-ins are:
    Acrobat 9.3.0.148
    Java Deployment Toolkit 6.0.210.7
    Java Platform SE 6 U21 6.0.210.7
    Mozilla Default Plug-in 1.0.0.15 (disabled)
    Shockwave Flash 10.0.45.2
    Shockwave for Director 11.5.7.609
    Silverlight 3.0.50106.0
    Unity Player 2.6.1.31.223 (disabled)
    Windows Live Photo Gallery 14.0.8081.709 (disabled)
    Yahoo Application State Plugin 1.0.0.7 (disabled)
    Extensions:
    AVG Safe Search 9.0.0.855
    AVG Security Toolbar 4.002.023.004
    Java Console 6.0.18 (disabled)
    Java Console 6.0.21
    StumbleUpon 3.73
    XULRunner 1.9.1 (disabled)
    Zynga Toolbar 2.7.1.3 (disabled)
    Only default Theme installed.

    Podcast (original): http://council.cio.com/podcast/temp.mp3
    Podcast (re-encoded by iTunes): http://council.cio.com/podcast/temp3.mp3
    Music MP3s that aren't working for me:
    http://council.cio.com/podcast/findyouregone.mp3
    http://council.cio.com/podcast/findyourehere.mp3
    http://council.cio.com/podcast/youvideoversion.mp3
    Music MP3 that is working:
    http://council.cio.com/podcast/twoareone.mp3
    (Oh, and ignore my comment earlier that this mp3 stopped working. I got confused back there with all the various tests... This file does play fully. The player also waits until the file is fully downloaded before starting to play... As opposed to the others where the player starts and ends playing before they are downloaded completely.)

  • How to I get my phone out of recovery mode without resetting it to factory

    My phone is stuck in recovery mode. I'm just wondering if there is a way to get it out of recovery mode without resetting it to factory settings. I don't have any recent back-up available. There are alot of photos on my phone I would prefer not to lose by ressetting it back to factory.

    You don't. Once it's in recovery mode, anything that was on the phone is already gone.

  • I have just purchased a used 3gs and the previous owner hadnt reset it.

    I have just purchased a used 3gs and the previous owner hadnt reset it.
    So i did the reset and left it over night as this can take a few hours.
    This morning 10 hours later there is stillthe cirlcle going round in the centre of the screen.
    There is no sim card in the phone.
    What do i do now? please help?

    To make this phone truly yours, do a Restore as New...
    See this Support Article on Restoring your phone...
    http://support.apple.com/kb/HT1414

  • Selecting items in a frame without selecting frame (HTML)

    i have a web page with two frames for two jsp's;
    and i'd like to be able to tab elements in those frames without passing the focus to a frame in whole/
    i tried to set a property <frame tabindex=-1> but
    in this case all the frame becomes inaccesisble
    if this propery isn't set i can tab until a whole frame becomes selected - that is a birder around it appeares///
    what should i do then????

    i've jjust solved this problem!
    i needed tabIndex = "-1" in a body tag of a page!!!

  • Storing a position value from the previous frame

    Hey guys,
    So, I'm trying to assign the X value a null object had at the previous frame so I can continue to subtract a number from it cumulatively. I'm trying to assign it to a variable (prevframe). I'm not sure where I'm going wrong, but the line I'm trying to do it on is written as follows:
    prevframe = transform.xPosition.valueAtTime(time-(1/24))
    So in my mind, this should be taking a look at the value of X on the null, then looking back in time to figure out what it's value was on the previous frame (my frame rate is 24, so I'm dividing 1 second in to 24 pieces and telling it to subtract that much from the current time), and assigning whatever that returns to the variable. But it's just returning a static value, even though I'm subtracting from it. I feel like it's not the correct syntax, but I really have no idea.
    I want to continue to subtract a value which is based on the velocity of another object from this, which I have worked out, I just can't figure out how to reference what this nulls X position was in the previous frame so it always returns the same value until all motion has stopped. The formula the variable is being run through looks like:
    finalposition = prevframe - camvelocity
    Which is then assigned to the final X position of the null object.
    So, I'm not sure where I'm going wrong. I hope I've provided enough information to help someone wrap their head around this and hopefully help me solve it.
    Thanks in advance,
    -Seth

    Sorry it was confusing. Let me try to clarify. My null object has a starting point, which is an X value of 2020. For each frame the camera is moving, I want to subtract the cameras velocity from 2020, but I want it to be cumulative. So say the camera is moving linearly at 20 px per frame. On the first frame this starts, the value it will return is 2000. Then on the next frame I'd like it to subtract 20 from the new X value of 2000, but it continues to look at 2020 as the value to be subtracted from. So there isn't any accumulation of this X position getting lower and lower, it just gets to 2000 and stops.
    When I plugged in your code I was getting the same result. I'm not sure if it's just not meant to work the way I was thinking I'd like it to, but…
    What I'm trying to accomplish is kinda weird though. I'm trying to get this null, which is a parent to some glares nested in a composition, to take both camera movement and actual composition movement in to account as it drives the position of the glare objects. I wanted to see if the composition was moving faster in the main timeline, or the camera, and then add or subtract the faster velocity to the position of the null object, and have it do that continuously rather than to the null objects starting value and nothing else. so 2020 - 20 - 20 - 20 - 20 ect., with a 20 (or whatever the velocity works out to be) for each frame things remain in motion.
    I want it to remain based on expressions just because I'm going to have a lot of these panels with glares, and hand keyframing each of them isn't something I'll have time to do, so I just want it to be based off of those two movements.
    I think I'm going to take a different approach though. I think I'm trying to do too much with this expression that can be done in different ways. Instead of having one null I'm going to have two, and I'll have an expression within my glare objects to decide which ones coordinates to use as a parent still based on velocity.

  • Creating a still frame without timex

    Hi, I'm wondering if there is a really quick way to create a still frame without using timex (it freezes up my entire tree for some reason when I use it with the keymix layer), without having to render out a single image (I dont want to loose quality) and without having to drag it through timeview (I get real finicky trying to drag the time bar back and forth with the mouse or pen)?
    There has got to be an easy way!

    Just change it from 1145-1325 to 1-5000 or something(you are allowed to change those values). Either that or do a new filein and only pick the frame you need, not the entire frame sequence and it will automatically set the in and out as infinity(uncheck the "sequence listing" in the file browser).

Maybe you are looking for