Pricing querry?????

Good Morning ,
Hi My querry is I cannot see VPRS Condion in pricing ie in the condition tab , i can see everything excise , zpp , zcp etc but not vprs , can some on epls guide me on this please

Hi Sunaina,
Ensure the following
1) In [V/06] for VPRS the Cond Ctgy must be G and should not contain an access sequence.
2) For the item category in [VOV7] the Determine Cost field must be enabled.
3) In [MM03] -> Accounting 1 View -> Current Valuation Tab -> Enter the Price Control as Standard or Moving Price and based on your selection maintain the cost of the material in either Moving Price or Standard Price field.
Regards
Nadarajah Pratheb

Similar Messages

Pricing Related Querry

Hi All
I Have a pricing related querry. Instead of calculating final price by adding up Basic PriceTaxFreight+any other charges, the system should calculate the basic price on its own once the final price is given. For example, the customer might say that I have to give him a Corolla car at Rs10 Lakhs all inclusive. And when I enter the final price of 10 Lakhs, the system should do the backward calculation to detremine tax, freight etc etc and adjust and alter itself to include everything in 10 Laks
How is this done/ Is it via conditions or formulas or ????

Hi,
This is possible in standard pricing also. Instead of having basic pricing + taxes etc, you create pricing procedure reverse way i.e. first condition should be final price and then other condition in reverse order....
but you need to check whether this is what you are expecting in sales order as pricing procedure can calculate results based on your input....
Regards,
Sameer

Querry over pricing procedure used in creation of BIlling request

Hi,
While creation of BIlling request via DP90 , system considers DIP Profile & pricing procedure and brings data /rates to billing procedure ..
I am trying to understand the pricing procedure, i am using standard pricing procedure RVAA01 ->
When i check the conditions Tab for a particular materials it has the below condition types :-
1. EK01
,PR00,MWST,DIFF,VPRS ..
Anbody pls give idea on how these conditions types are determined ..??
I have checked & found condition record only for PR00 & MWST .. i could not find condition record for VPRS Condition type but how is it determined ?
regards
giri

EK01 comes from the actual cost on the service order
PR00,MWST,DIFF,VPRS from memory these are all condition records created via EK11
PeteA

Function to simulate PO pricing

Hi,
I am using function ME_PO_PRICE_SIMULATION to recalculate purchase rebate agreement in a querry.
The FM didn't work if an article get a flag for deletion or a status which didn't allowed the purchase.
Is there an other FM to simulate the purchase pricing ?
Is there a FM to calculate or recalculate the rebate agreement condition ?
Thanks

Hi,
The FMs
ME_PRICE_SIMULULATION_PROCESS
ME_SOURCE_PRICE_SIMULATION
didn't give the pricing.
Or if yes how do you use it ?
Thanks
Ké

Customer pricing procedure table

Hie can you please let me know customer pricing procedure table for sales document?
I want to know the customer pricing procedure assugned to Sales document in table level.
thanks and regards,
Marry.
Edited by: marrysap on Jun 7, 2011 4:23 PM

Hi There is no table where you can see the customer pricing procedure used for sales document
If you want to see then you might need to write a querry
SQVI
Select tables
VBAK
KNVV
Selection parameter
Sales document number
Customer number
Output
Sales document number
Customer number
Cust. Pricing procedure
Thanks

Changing Pricing Procedure

How can we change pricing procedure in VA02 ?
regds
JKS

> Hi Jithesh,
> Were you able to find way to change the pricing
> procedure in va02? if yes please let me know.
>
> When I create RE with reference to F2, i do not want
> the pricing procedure of F2 to be copied in RE. even
> if I already assigned different pricing procedure for
> RE, still F2's is copied.
>
> Please somebody shed light on this.
>
> Best regards,
Hi,
As per your above querry the copy controls VTaf controls it, and u cannot have a new pricing procedure as desired by you since returns bussiness transaction needs the price at which the goods were supplied and may be the price might have increased now and was less when the company actually supplied so credit memo to be for original price and not the present increased price (If price increased), except taxes get redetermined. In the copy control - VTAF (Pricing type : G assigned).
I hope it can lead to more thoughts.
Regards
Reward points if i made sense
krishna

Pricing procedure of free goods

Could anyone please tell me the effect of pricing procedure in free godds?And what is the difference between pricing procedure in free goods(IMG->Sales and Distribution->Basic Funcions->Free Goods) and pricing procedure in pricing(IMG->Sales and Distribution->Basic Funcions->Pricing)

Hi Wei Zhang,
When there are more than 2 materials say material A which is of some price, and material B which is Free of cost, then the item category will be different for those. TAN for Mat A and TANN for materail B.
Pricing is depends upon the customer pricing procedure and document pricing procedure along with the Sales Area.
When there are free Goods, Again yu have two conditions
1. Give 100 % discount on free goods.
2. Or charge 0 value for that.
This pricing procedure you can do in free goods priocing procedure.
Hope this will help.
Thanks,
Raja

New VMS/IPC boxes - speed and pricing

For the most part, I've been a very happy FiOS customer. The internet side has gone out exactly once in the year I've had the service, and it was restored within an hour. TV has dropped out twice, both times very late at night (I assume for head-end maintenance). Reliability is better than every other ISP I've ever had, combined.
That said..
I wanted to snag another STB for the house - found out the local stores had all been closed (I can understand why from the financial aspect, but it was still a shock pulling up to my old store to pick up another STB.. and finding a "for lease" sign, when I'd been by there 2 months prior), so I looked at options online. The new VMS + IPC boxes looked promising, especially since they added the ability for the entire house to pause, rewind, schedule recordings, etc, from any TV - instead of only the DVR being able to do that (though the old boxes could stream recordings from the DVR).
My chief complaint so far - while the VMS box itself is responsive, the IPC boxes are painfully slow to respond to anything. Picture quality is fantastic, but using them feels, to put it in nerd terms, like using a Pentium 90 with Windows XP and 128MB RAM. They take 5+ to respond to anything more than a channel change (and even that takes up to 3 seconds), and frequently "lose" remote key presses if you try to, say, hit guide, hit page down, then try to arrow down to the channel that you know is on the next page. It literally feels like a throwback to the earliest digital set top boxes from Comcast/Time Warner - the first ones with built-in TV listings in the mid 1990s. The speed is right on par with them; the only thing faster right now is they don't shut down for 30 minutes a day to update the TV listings.
I've gone through the built-in diagnostics on the boxes to verify signal levels - they're decent (not perfect, but this is a 20 year old house with mostly original coax), but we have no pixelation or picture drop-out, so I would think they could carry the basic stuff between the IPC boxes and VMS pretty easily. The router certainly has no problem handling the 75/35 on the same coax (speedtest shows 85-90 down, 35-40 up, with a ~5ms ping, no matter which cable outlet it's plugged into)..
My other complaint - why did Verizon move to "rooms" for pricing? I thought I was getting a DVR plus 3 STBs (since I ordered 3 STBs and asked for a DVR), instead of a VMS + 2 STBs - and I'm paying much more than I did for the old DVR + 2 STBs.
With the griping out of the way - is there a reasonable chance that firmware updates will help with the speed of the IPC boxes? Or is there a chance it's a cabling issue? (I have no problem pulling new coax or cat5e, and I can provide signal levels if that'll help) If not, is there any chance of getting the old QIP7232 DVR + QIP7100 box back (and adding another 7100), and switching back to what I was paying before? I know they're a bit antiquated (especially the 7100s), but they were much more responsive, and didn't make me want to throw the STBs through the window. It just seems really rediculous that I'm paying such a large premium (plus the "upgrade fee") for equipment that, in terms of the user experience, is much worse.
Again.. been a happy customer for a long time, but the new terminals are super painful to use.
Thanks.

If this is the case. I think I will wait till the bugs are worked out
Question what were you paying before and after for the boxes. So what was the old DVR + 2 STB's and the new DVR plus 2 stb's
Trying to get an idea of what you meant by way more. Most people said same pricing and a small $20 or so upgrade fee

How to update pricing in open sale order

Hi all
in open sale order suppose my basic price has been changed .how Can i update all open sales order basic price in one shot.

Dear Sachin,
Please follow the point as given below;
1. In VTFL for your item category maintain pricing type as B if it is delivery related billing and if it is order related billing VTFA maintain pricing type as B and one more thing maintained Billing Quantity as C if you using VTFA and Billing Quantity as D if you using VTFL.
2. Create the new condition records in VK11 for your new price ( Do not change the existing condition record in VK12) with proper validity dates
3. Use update button in billing the system will pick the new record by accessing VK11 in billing.
Try this, it will work.
Regards,
Bharat B

Free Goods with pricing condition (Urgent)

Hi MM Expert,
we have a probleme with free goods. because in PO item of free goods, there is no condition management (no Invoice entry) but we should manage some pricing condition for the item (spécifique condition relative to transport, ...).
so are the any way of managing the expenses annex condition(transport charge, customs clearance charges,) for the free goods in an item of Purchase Order ??
thank's in advance.
Said

Hi,
This is not possible to maintain the condition s for free goods because while creating the PO for free goods by selecting the free goods tad at item level, There is no Condition tab at Item detail .means you are not able to mainatin conditions.
If you want to maintain the conditions ,you have to treat as a Normal scenarios .
Regards
Sanjay L

Free Goods Pricing Problem

In our pricing procedure we have R100 and NRAB condition types.In sales order we are giving free goods(Exclusive).Now in condition tab for the free goods line item the value is showing as followes
PR00- Rs 150
R100- Rs 150(-)
Net Value - 0
CST- 4.50
Net Value with Tax 4.50
Rounding Off   4.50(-)
Total value - 0
So for this line item Net Value is coming Rs 4.50(-) and Tax is Rs 4.50.
In header this value is adding or subtracting from the value of main line item and showing the final value.
So how can i make the net value and tax 0 for the free goods item, so that it will not affect the total value of the document.
Regards
Jyoti

Hi Jyoti,
In this scenario you can use below pricing procedure.
Step 10- PR00.......................................................................100 Rs
Step 20 Gross Price..............................................................100 Rs
Step 30 CST (calculate on Step 20) From 20 to 20....................   8 Rs
Step 40 Net Value( From 10 to 39)...........................................108 Rs
Step 50- R100 (From 40 to 40)..................................................-(108) Rs
Step 60 NRAB........................................................................
Step 70 DIFF..........................................................................
Total       .................................................................................   0 Rs.
I hope it will help. Please check and confirm
Thanks,
Raja

How to change pricing Conditions in Sales order in change sales order bapi

Hi Experts,
How to change pricing Conditions in Sales order in change sales order bapi.
I have used the 2 function modules bapi-changesalesorder and sd salesdocument change, But it is creating the new record , instead of changing the existing one, Could please assist regarding the same
Thanks in Advance .
NLN

HI NLN
I have just tried on my system and managed to overwrite the existing price by passing the following parameters.
Import Paramters:
 SALESDOCUMENT - Sales Document Number
 ORDER_HEADER_INX - UPDATEFLAG as 'U'.
 LOGIC_SWITCH - Import Structure - Pass 'X' to LOGIC_SWITCH-COND_HANDL.
Tables:
 CONDITIONS_IN - ITM_NUMBER,
 COND_COUNT, -> Condition counter same as KONV-ZAEHK generally it is '01'
 COND_TYPE,
 COND_VALUE,
 CURRENCY.
 CONDITIONS_INX - ITM_NUMBER,
 COND_COUNT,
 COND_TYPE,
 UPDATEFLAG as 'U',
 CURRENCY.
 Hope i have clarified your query.
Kind Regards
Eswar

Manual Pricing for configured materials in Sales Order

We use variant config for our goods produced and the pricing results from what is configured. Thsi works fine.
However, occasionally there is a need to replace this pricing with a manual price entered into the Amount column on the order line. The PR00 condition comes in OK but we find that if changes are made then the configured prices are re-applied as well so the order line ends up with 2 types of pricing in effect.
How can I stop this happening i.e. to get SAP to use only the manual pricing if a price is entered into the Amount field?
Thanks
Jim

Jim
Are you sure that you are using PR00 for configurable mat, Ideally it should be VA00
Leaving that aside, if you keep the condition type as Manual entry as priority or No restrictions, in the Manual entries, then when the automatic entries are overwritten by manual entries, only one record will exist and the automatically updated record will no more be in the screen. Please try it.
There is also a OSS note for this, though I dont knwo the number. You can try for it.

Picking of the varient pricing in scheduling agreement

Hello Gurus
goodmorning
i have a small query i.e when i'm using OR as a document type for my sales order its picking the varient price and all are going fine but when i'm trying to do same for scheduling agreement DS in my sales order its not picking the varient pricing plz help me out wat could be the reason.
in advance thank you
venkat
Edited by: K.Venkata Chalapathi on Jan 30, 2009 9:10 AM

Dear Venkat,
Price will get determine in the sales order based on two settings
1.Pricing procedure determination
2.Condition record maintanence.
This may happen for two reasons
1.Different pricing procedures are getting determined for sales order and scheduling agreement.
One pricing procedure may have variant condition type and other pricing procedure may not have the variant condition type.
So check same pricing procedure is getting determine in the both documents or not
2.Condition record may not maintained for the scheduling agreement document type in VK11
So check the condition record maintanence for the variant condition type through VK13 transaction.
I hope this will help you,
Regards,
Murali.

GATP in APO and Free Goods Pricing Records in R/3

We have set up Free Goods in SAP R/3. These free goods are granted based upon a series of access sequences in pricing.
We also have our Order Entry system using GATP on our APO box. In that APO instance, we have set up a large number of product substitutions to occur at order time.
When an item is ordered that is NOT subbed to different item by APO and that item has Free Goods associated with it, the Free Goods are granted by R/3 and placed onto the sales order.
When an item is ordered that IS subbed to different item by APO and that item has Free Goods associated with it, the Free Goods are NOT granted by R/3.
Why are the Free Goods being ignored after the substitution? We have Free Goods records in pricing for BOTH items, and neither one is granting the Free Goods.
Is this a bug, a feature, or an oversight ?
Any help in this area will be GREATLY appreciated!!!

Hi John,
GATP in APO does not supports Free Goods.
Rohit
Edited by: rohit kumar on Feb 20, 2009 1:33 AM

Pricing querry?????

Similar Messages

Maybe you are looking for