Printer 3545:error code OXC 4EB827F ,HWLMICCIZC

Deskjet Ink Advantage 3545 e-All-in- One Printer
I have purchased the refered printer in Feb,2014 and since working perfactly but from last week when we go for print and power on the printer its power button ligt blink and after serching complited on screen the error code OXC 4EB827F /HWLMICCI C appear and stop the working.
Pl suggest us how to resolve the problem or deput your service engineer to attand the same as the printer still under warranty period
Mukesh Bhatnagar
[edited personal information by moderator]

Hi there @mu_bhr , welcome to the community
I read your post about the error code you are noticing on your Deskjet Ink Advantage 3545. PLease see the document I have posted for you below, in hopes to help you through the problem.
'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error M...
If the error continues afterwards, please call us directly to inquire about your printer options, as you may need a replacement printer.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

How to correct printing problem error code 0xd0840001

Help! My 5610v suddenly stopped printing. All of the lights are flashing and error code " 0xd0840001 Reset Power" shows in the window. I have unplugged power and still had same error code when I plugged back in. Is this a fatal error or is there a fix? Thanks.

Hi @thom235,
Do you have the printer connected directly to a wall outlet or is it in a surge protector or power bar? Even if you have been using a surge protector/power bar all this time and you feel it is not the cause, please connect it to a wall outlet just so we can eliminate the power source as the root cause. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
In this document you will see, ISSUE: Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector
^ This is not limited to Laserjet printers.
When you unplugged the printer, was it on? If not, let's perform a hard reset. To do so, leave the printer on and unplug the power cable for 1 minute. While it is unplugged, hold down the power button on the printer for 10-15 seconds to release any built up power, then after the minute has passed, plug the printer back in.
If the issue persists, I suggest you call us. If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
Best of luck!
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Finger Print Reader Error Code E7210005

Hi: I've just upgraded by X61 Tablet from Vista to Windows 7. I did a complete reimage of the hard drive. Installed the latest Finger Print software downloaded yesterday from the Lenovo website for 32 bit WIndows 7. No problem on install. When I try and enroll my first finger, I get an error message that says "Operation is not allowed by operating system policies. The error code is E7210005. This is an error message generated by the THankVantage Fingerprint software and not Windows 7. I need help on troubleshooting this message. I have no idea as to what operating system policies they are talking about and where it is located. I looked at the Windows Security Policy for the local machine and saw nothing that struck me as referring to this issue, but maybe I'm wrong.
Please advise and give me any suggestions. Thanks. Nile

no-one wrote:
Actually, if you read this post:-
http://www.codeweblog.com/thinkpad-t61-under-installation-win7-fingerprint-recognition-software-to-s...
It seems to be Lenovo's wonderful ability to code for a 64Bit Os that seems to be at issue here.Install a 32bit Vista thinkvantage software in a 64bit OS and it works.
no-one
Actually parts of the code you refer to are written by Upek and not Lenovo and there is a API so Lenovo and other manufacturers can create their own GUI. Lenovo didn't create the fingerprint software/drivers from scratch on their own, but part of it is actually from Upek with a API for Lenovo and others to make a customized GUI. As the article says the Windows 7 fingerprint software from Upek have the same problem.
Also skywalkr is correct about the statement that "built-in Administrator account is not allowed to use biometrics". That have to do with the new addition to Windows 7 "Windows Biometric Framework" (WBF). Since Vista don't use WBF that limitation is not in the Vista version of the fingerprint software. This has nothing to do with 32 or 64 bit or that Lenovo is unable to code for a 64 bit OS, but rather the limitation in WBF/Windows 7 like skywalkr already pointed out. Neither do i understand why you refer to 64 bit since Nile clearly stated that he/she is using the 32 bit version of Windows 7.
-gan

MG series 5320 Cannon printer, error code 6000 appears, can't get rid of it

Cannon Printer MG5320, Error code appears, can't get rid of it?? can anyone help

Hi ikovach10,
To try and resolve the error, if any object is placed in front of the machine, please remove it. Next, please open the paper output tray gently, then turn the power off and back on. If the error still appears, please turn off the machine, unplug the power cord from the power supply and leave it unplugged for 10 minutes, then plug it back in and turn it back on. If the error persists, the printer will require servicing.. Please call or email us using one of the methods on the Contact Us page for servicing options available to you.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

What does this mean error code u44m1i210 elements 13

I bought this over the internet and downloaded. I works but it says it has a update, so I started the update gets all the way through and end it gives me an error. I tried this 4 times. I printed the error code telling me to try again later. The last error code U44M1I210....This Elements 13

Bob,
I am getting eerror 34506 followed by Multiplexing error when I answer OK to the 34506 error.
At what point in the process?
I am loading old VHS tapes into IMovieHD, editing them, then sharing them to IDVD.
Do you have chapter markers? If so:
Make sure no chapter markers are within two seconds of the start or end of the timeline. Make sure no chapter markers are within a transition. Make sure no chapter markers are within two seconds of the end of a transition.
Suggest you create a disc image and then burn the DVD. File/Save as Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006

New Printer QRL Support Codes

Hi Guys!
We've got a great new support library tool that may just save you a bunch of time troubleshooting your Dell printers.
We know it can be difficult to troubleshoot printers, having to run back and forth between your system and the printer with error codes, model numbers, service tag information, then having to remember all those troubleshooting steps from our guides. To help, we've developed QRL stickers that you can place directly on your printer. When scanned, you’ll be linked to resources like:
All you will need is a QRL sticker and a smart device (Tablet or Smartphone), with a QRL code reader application installed. Just scan the QRL with your device and you will be linked to the Dell resource library specific to your printer model, with easy access to our troubleshooting guides and even the ability to order replacement parts, like toner, right from your smart device. Check out the following informational video for more details!
We're really excited about this new QRL Mobile Support Solution and would love to hear your feedback. Please use the comments below to let us know if you think you would find these helpful with your printer support needs. We would be happy to provide more information.
Dell QRL Reader Downloads
iOS             - https://itunes.apple.com/us/app/dell-quick-resource-locator/id507133271?mt=8
Android     - https://play.google.com/store/apps/details?id=com.dell.qrcode&hl=en
Windows    - http://www.windowsphone.com/en-us/store/app/dell-qrl/7db321a3-f02f-4e63-b9ce-13dca4b3bc42
Thanks,

I actually already had it set in HP Jetdirect-Socket. I deleted it and went back to IPP and it worked greated with no message. I have no idea why, but I'm glad it worked.
Thanks for your reply!
Mona

Receiving error code 0x61000016

Printer will not print receiving error code 0x61000016

Hello tennis14,
Welcome to the HP Support forums. I understand that you are getting error code 0x61000016 on the display panel of your HP printer.
To better assist you, would you please provide some additional information:
What make/model/product number of HP printer do you have? Guide to finding your product number
How is the printer connected (USB cable, ethernet, or wireless)?
What operating system is running on your computer (Windows 7, Mac 10.8, or Windows 8, etc)?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Pixma mg5220 has error code 5012, makes a loud sound and won't work.

I have a pixma mg5220 all in one printer. Error code 5012 shows and a loud sound occurs. Running windows8.1 on hp smarttouch 15 812, MIGHT BE b12 It's hard to read. This happens rarely, but when it does, I don't know when it will start to work again. Any suggestions, please?

Hi roxyoung56, To try and resolve the error, please turn off the printer, unplug the power cord and wait for at least 10 minutes, then reconnect the power cord and turn the unit back on again. If the error still displays, the printer will require servicing. Please call or email us at one of the methods on the Contact Us page to obtain your servicing options.

Error code OXB808DEDE

Dear Forum Members!
Today when i wanted to print with my printer after I switched it on, I got this error code on my printer panel:
error code OXB808DEDE
I could find similar OX alphanumerical error codes but not this one.
I tried to reset my printer (plugged off and wait...) but didnt help.
Basically I couldnt do anything with it. After it switched on it makes noises as usual but then i got this error code.
Please if someone know what to do help me!
Thanks in advance!

Hey there @Darkaros , Welcome to the forums!
Thanks for reaching out to us!
Error codes that are alpha-numeric usually mean there is either an Ink System Failure, Printhead issue, or Printer Failure. In some cases it could mean there is a Carriage Jam. I posted you some links below to look through. Try the troubleshooting steps recommended to try and overcome the error message!
A 'Carriage Jam' Message Displays for HP Deskjet 3520 e-All-in-One and HP Deskjet Ink Advantage 3520...
HP Printers - 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a '...
I hope this information helps you, if the error continues, give us a call directly to see about your replacement options.
To show your appreciation or thanks for the reply, click on the "thumbs up" button below!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

New HP wireless printer install gives me Error Code 43

I just bought the HP wireless and networking capable all-in-one printer, the C309 series (no indication of exact model number anywhere on the machine, but the maybe it's the C334, since that's near the serial number on the back.
I connected it to my wireless network with no troubles. I inserted the install disc into my macbook pro, and got past the installation, to the setup step when I got the news:
"The operation can't be completed. An unexpected error occurred (error code -43)."
Does anyone have any ideas as to what the problem is here?

Try here:
http://discussions.apple.com/forum.jspa?forumID=1224
Al

Adobe Print Form Error - Invalid Response Code: (401) Unauthorized

Hi, I've just configured ADS on Netweaver 2004s. I've run through the config guide and everything works ok including the form generation test report FP_TEST_00 which outputs PDF without issue. I have two problems:
-When I run a "test connection" on the RFC destination 'ADS' using the ADSUSER for the login details, I get a 403 not authorized error. Changing this user to J2EE_ADMIN resolves the issue and I get a 302 redirect. I've tried adding other permissions to the ADSUSER without any luck.
-Running a report on the Portal under e.g. Executive Reporting and attempting to just right-click and hit "Print Version" results in a 401 error for request "http://hostXX:portXX/AdobeDocumentServices/Config?style=document" exactly as per this thread: Re: Adobe Form Creation Error - Invalid Response Code: (401) Unauthorized. However, I've double-checked all user details in Visual Administrator (ADS_AGENT) and on the ABAP stack side in su01 and sm59. I also tried changing the users to dialog with no effect. If I go directly to that URL and log in with ADSUSER I get a 403 not authorised error (using J2EE_ADMIN is again successful). I've noticed that in the http access log the HTTP protocol used is 1.1 when using the web browser and 1.0 when using the sm59 connection test. I've heard of problems with using HTTP/1.1, but when I change the options on IE8 to use HTTP/1.0, it changes for all other requests except the request for "http://hostXX:portXX/AdobeDocumentServices/Config?style=document", which is still submitted as HTTP/1.1. Conversely, in sm59 if I specify that it should use HTTP/1.1 under Special Options, I can see from the access log that it is in fact still using HTTP/1.0. Could this be related to the 401 error code that I'm seeing?
Any help would be appreciated. Thanks,
John

I think I've ruled out the HTTP protocol version as being an issue here. However I may have found more useful information on the actual issue.
In the security log under usr\sap\<SID>\DVEBMGS00\j2ee\cluster\server0\log\system I see a different message for the unsuccessful report PDF generation attempt to that of a direct query to the same URL with the same web browser, as below. The unsuccessful attempt appears to forget the ADSUSER credentials and resort to the default J2EE_GUEST which has no authorisations and therefore fails. The direct query doesn't lose the ADSUSER credentials and I think this is because it prompts for the user/password when needed. Does anyone know why this happens for a direct query to this URL but not for the PDF generation attempt?
Resulting logs from unsuccessful PDF generation attempt:
#1.5 #005056AF1EB300750000002D0000142000048B4D2208F055#1279063306899#/System/Security/WS/SecurityProtocol#sap.com/irj#com.sap.security.core.client.ws.AuthenticationContext.setDestination#AICL0001#622##<host>_<sid>_3576650#AICL0001#4c1a62608ed511dfbe2a005056af1eb3#SAPEngine_Application_Thread[impl:3]_5##0#0#Info#1#com.sap.security.core.client.ws.AuthenticationContext#Java###An destination was set with the following properties:
{0}.#1#{PROXY_ENABLED=false, CLIENT_AUTHENTICATION_KEYSTORE_VIEW=, SAP_SID=, SLD_URL=, USERNAME=ADSUSER, SLD_WS_NAME=, URL=http://<host>:50000/AdobeDocumentServices/Config?style=document, PROXY_URL=, SSL_SERVER_AUTHENTICATION=IGNORE, SLD_WS_SYSTEM_NAME=, PASSWORD=XXX, SLD_WS_PORT=, SAP_CLIENT=, DEFAULT_URL=http://localhost:50000/AdobeDocumentServices/Config?style=document, Authentication=BASIC, CLIENT_AUTHENTICATION_KEYSTORE_CERTIFICATE=, URL_CHOICE=Custom, SAP_LANGUAGE=}#
#1.5 #005056AF1EB30072000000250000142000048B4D220A12ED#1279063306977#/System/Security/Authentication##com.sap.engine.services.security.authentication.logincontext#J2EE_GUEST#0##<host>_<sid>_3576650#Guest#4c1a62608ed511dfbe2a005056af1eb3#SAPEngine_Application_Thread[impl:3]_24##0#0#Info#1#com.sap.engine.services.security.authentication.logincontext#Plain###LOGIN.FAILED
User: N/A
Authentication Stack: com.adobe/AdobeDocumentServices*AdobeDocumentServices_Config
Login Module                                                               Flag        Initialize Login      Commit     Abort      Details
1. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   SUFFICIENT ok          exception             true       Authentication did not succeed.#
Successful direct access of URL http://<host>:50000/AdobeDocumentServices/Config?style=document (click on rpData test and manually log in as ADSUSER):
#1.5 #005056AF1EB30070000000250000142000048B4D3E260016#1279063778670#/System/Security/Authentication##com.sap.engine.services.security.authentication.logincontext#ADSUSER#675##<host>_<sid>_3576650#Guest#812f72008ed611dfa62d005056af1eb3#SAPEngine_Application_Thread[impl:3]_14##0#0#Info#1#com.sap.engine.services.security.authentication.logincontext#Plain###LOGIN.OK
User: ADSUSER
Authentication Stack: com.adobe/AdobeDocumentServices*AdobeDocumentServices_Config
Login Module                                                               Flag        Initialize Login      Commit     Abort      Details
1. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   SUFFICIENT ok          true       true
Central Checks                                                                                true                  #
#1.5 #005056AF1EB30070000000260000142000048B4D3E2666A6#1279063778702#/System/Security/Audit/J2EE##com.sap.engine.services.security.roles.audit#ADSUSER#675##<host>_<sid>_3576650#ADSUSER#812f72008ed611dfa62d005056af1eb3#SAPEngine_Application_Thread[impl:3]_14##0#0#Info#1#com.sap.engine.services.security.roles.audit#Java###{0}: Authorization check for caller assignment to J2EE security role [{1} : {2}].#3#ACCESS.OK#SAP-J2EE-Engine#all#

When I try to print from web page I get "printer not activated - error code 30", but I can copy text into Word document & printer works.

I am unable to print anything from an internet web page. I continually get "printer not activated, error code- 30" followed by "An unknown error occurred while printing". I can copy the material from the web page, place into a Word document and then print. This just started yesterday and I have no idea why. Would appreciate your advice!

See this:
[http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page]

When I try to print from web page I get "printer not activated - error code 30", printer works on Internet Explorer

When I try to print from web page I get a dialogue box "Printer not activated - error code 30" followed by a dialogue box "An unknown error occurred while printing". The printer works on websites when I use Internet Explorer. Also, if I copy the web page and paste it into a Word document, I can print a copy. This issue just started this week; I have not encountered this problem prior to this week. Please advise.

What does that error message say?
See this: http://kb.mozillazine.org/Problems_printing_web_pages

I can no longer print a web page. I get an error code 20 message

I can no longer print a web page. When I do I get an error code 20, unspecified problem.

Try a battery pull, wait a couple of minutes and pop it back in..

Activation error: Printer not activated, error code 20

I have had my officejet 4215 all-in-one printer well over a year and it has connected and printed whatever I wanted. Yesterday when I wanted to print an email it would not and the following box popped up: Activation error: Printer not activated, error code 20. Then the next box that popped up said: Printer Error An unknown error occurred while printing.
If I copy the email over to a Microsoft Windows page, then i can print it fine.
Any idea how to fix this so I can print email's like I used to?
Rey

What operating system? What email program are you trying to print from?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Printer 3545:error code OXC 4EB827F ,HWLMICCIZC

Similar Messages

Maybe you are looking for