Printer and Touch Smart do not talk to each other

I have a HP Touch Smart and Cannon MP810 and the wireless function will not work between them I have a belkin and the Cannon dongle but neither will work.

Sorry it is a bluetooth not a wireless

Similar Messages

  • HP Envy 120 printer and Macbook Pro won't talk to each other...

    Hi
    I have a shiny new printer and a fairly new Macbook Pro and simply cannot get my printer to 'talk' to my Mac. 
    The printer is connected to our home internet and the Internet report you can print off says everything is fine.
    We have done the Apple > Software update etc to make sure the latest drivers etc are installed. (For info, we are on OS X 10.8.5). However, when we then try to print something, it comes up as no printer installed and there is no 'nearby printer' showing, which I believe should be showing there. (We have tried adding manually, too, using various settings and can't do it that way, either.)
    When this didn't work, we downloaded the relevant driver from the HP site (to see if this would help, but it didn't).
     After downloading the driver, we go through the installation process and what happens is that it doesn't have our printer listed and asks that we connect our printer. When we connect it, it recognises it and we then proceed. It then says your printer is now connected and you may remove your device. When we remove it, it then does not have any device listed and we cannot progress any further. Stuck in an infinite loop...
    Also, firewall and security settings are fine.
    I've also restored default settings on printer etc and started over a number of times.
    Any help would really be appreciated.

    Kodak has drivers for up to Mac OS version 10.7 on their website here:
    http://support.en.kodak.com/app/answers/detail/a_id/41686/selected/true
    Did you try downloading and installing them?

  • NetWeaver XI components are not talking to each other

    I am an XI  consultant, i dont have proper Basis support at my client, since they are fond of only ABAP stack.
    They installed netweaver xi from the market place.
    I am unable to import any SWCV (even SAP BASIS) from SLD to IR and IR menu is blank.
    Unable to find list of adapters in Integration Directory.
    RWB -component monitoring is blank .
    SLD- creation of products,SWCV,Technical Sys,Buss Sys is possible.
    In conclusion i can say that they all are not co-operative and not talking to each other
    And also i want to know wheather xi 7.0 is compatable to databases Oracle 8.0.3 and Oracle 8.0.4

    Hi Venkata,
    Does the XI post Installation steps done by the team or not? It seems that there is some steps missing while doing the XI installation. Talk to to the BASIS team and tryu to find out the solution.
    >>> Unable to find list of adapters in Integration Directory.
    Check thisblog for it:
    /people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
    >>> And also i want to know wheather xi 7.0 is compatable to databases Oracle 8.0.3 and Oracle 8.0.4
    In my view, yes. XI is compatible with all the versions of Oracle Database above version 8 but never tried it.
    Reward points if helpful. *
    Regards,
    Subhasha Ranjan

  • N and G networks not "talking" to each other

    Hi Everyone,
    I have an Airport Extreme (802.11n) which is connected to our cable modem. Following an article in Macworld, I set up two networks, one for our "N" machines (a new iMac and a Macbook) and a "G" network for our older laptops (a PBG4 and a G4 iBook). The "G" network begins with an AEX which is connected to the Extreme via an ethernet cable. The "N" network is 5ghz and all works well except for one thing. I recently converted the "G" network to WDS; both the AEX base station and the WDS AEX relay have speakers attached to them, and the remote AEX (the last in the chain) is connected to our printer. Before I changed the AEXs to WDS, the "N" machines could both print and play to the connected speakers in the "G" network, but since I switched the "G" network to WDS, the "N" machines can't do so. (The AEXs don't show up in Airport Utility or iTunes on the "N" machines.) The only way we can print or play music from the "N" machines is to switch to the "G" network. I must have missed something when I set up the "G" WDS network. I'd like to make it so the "N" machines can stay on the "N" network but can access the functions on the "G" network. Thanks in advance.
    Joe

    In this network configuration, the key is to make sure that the AirPort Express Base Station (AX), that is acting as the main base station in the WDS, is configured as a bridge. (Connection Sharing = Off (Bridge Mode))

  • Safari and Mail not talking to each other Safari says no software found

    Hi Everyone,
    Okay, when using Safari and trying to email the web content by pressing command + i a message pops up saying the following "Safari couldn't create and email message because it couldn't locate an email application." then it states "You can use the Mail application included with Mac OS X to send webpages. To do so, you need to install Mail using the Mac OS X installation CD's."
    Well I have mail it came with Leopard "Hello" I use it every day. Has anybody encountered this problem any help would be highly appreciated. I have cleared the preferences out of the library folder for Safari and Mail and nothing.
    Sincerely
    Gforce06

    Hi V.K.
    Thank you I reselected mail and it did the trick.
    Sincerely
    Gforce06

  • Windows Vista & Palm Centro 690 not talking to each other

    After my other phone went through the wash machine I changed to a this Palm unit.  Activated it, came home and installed the sync software, worked fine.  Couple of days later tried to sync again, no such luck.  I have been working off and on for a couple of weeks trying to get it to work again!!!  I have talked to the local Verizon office, they suggested I talk to tech support.  Called them, spent over an hour on the phone with them uninstalling the software, again, download the new software, again, still nothing, did a reset and a format and again nothing.  Have been using the Palm as a regular phone and it is fine.  I have been unable to figure out what to do.  I even talked to Hp tech support, not their problem!!! talk to the palm people.  So here I am, I have looked through your forms but was unable to locate anything that is related to the Centro and Vista.  I am almost willing to try anything that seems reasonable.
    Post relates to: Centro (Verizon)
    This question was solved.
    View Solution.

    From the bottom up.
    Palmdestop 6.2, on a 32bit HP Pavillion a1740n, When I plug the usb cable into the phone I hear a "dull thud" like and error, then it just repeats it self. I was able to find this information the other evening:
    Problem Event Name: - PnP Driver Not Found
    Architecture: - x86
    Hardware ID: - USB\VID_0830&PID_0061&REV_0200
    OS Version: - 6.0.6001.2.10.768.3
    Locale ID: - 1033
    Hopefully this means something to you, as it doesn't to me.  Additionally last night I was trying to install new drivers through device manager from the CD, but the machine reported that what I have is current, as well as the dialogue boxes go by so fast that it is next to impossible to do anything, such as change the path.
    Thanks, for your response and I hope you come up with a solution.
    KZ
    Post relates to: Centro (Verizon)

  • They Are Not Talking To Each Other

    I just bought a new iMac. With the old iMac, every time that iTunes was launched, the computer would sync with Apple TV. This computer does not sync with the launching of iTunes. I found this out when I rented a movie last night and tried to watch it. It was there on the iMac but it did not show up on Apple TV. It was only then that I realized that the syncing was no longer happening. How can I get it to sync again?
    Cheers
    John

    Let me just backtrack a bit here.
    So I'm sitting on my sofa in front of the TV set and I fire up Apple TV.
    From the Menu I choose
    Settings
    Computer
    Add Shared iTunes Library
    Connect to iTunes Window comes up with the following message
    to stream iTunes content to your AppleTV, open iTunes and select AppleTV from the Devices list. You will need to enter this passcode
    and then you're given a 5 digit code to enter. At this point I rush upstairs where my iMac is, open iTunes and yes, there is the Apple TV in the Devices list but there is nowhere that I can see for me to enter the 5 digit code. Ideally I should be seeing the AppleTV icon with the Click to Set up" next to it in the list as in these instructions
    but all I see is a plain Apple TV icon so I am stymied. Maybe you should be renting movies via AppleTV and not on the iMac although I would have thought that with all the interconnectivity, a rental on any device can be viewed on any other.

  • HT1338 New OSX Mountain Lion.  New Epson Expression Premium XP-700.  Will not talk to each other.  Would be grateful for any assistance.  Thanks.  Brenda

    I HAVE A NEW MAC OSX MOUNTAIN LION AND A NEW EPSON EXPRESSION PREMIUM XP-700 PRINTER, I AM HAVING TROUBLE TRYING TO GET THE SOFTWARE TO DOWNLOAD,CAN YOU PLEASE HELP.
    MANY THANKS
    BRENDA HUTCHINSON

    First please don't type in all caps. it's considered bad manners and shouting in online forums and is difficult to read. Normal typing is preferred. This is the latest driver
    http://support.apple.com/kb/DL1398
    You can also check at the Epson web site for support.

  • When i turned on my i pod a white apple logo was shown which then turned to rainbow colours and the i pod started buffering, this is all it does, i cannot get it to stop and my computer will not talk to the i pod, help?

    when i turned on my i pod a white apple logo was shown which then turned to rainbow colours and the i pod started buffering, this is all it does, i cannot get it to stop and my computer will not talk to the i pod, help?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I have bought  three iPhone 6  one for me and one each for my two kids  we have just done the update iOS 8.01 now all phone  do not connect to service provider and touch id is not working ,  APPLE HELP !!!!

    i phones  updated iso 8.01 all three phones  will not connect to service provider and touch id
    will not work  APPLE HELP !!!!!!!!!
    anyone know  i fix as  i have spent over 2000 pound on three phones that won't work
    all three where working fine until the 8.01 update

    Apple just pulled the update because it is a major fubar! You will have to rollback your iPhone to the base iOS 8 using iTunes and Apple needs to seriously test its patches!
    Update:
    Simply connect your phone to iTunes and back up your data. Then, click the “Restore iPhone” button and follow the on-screen instructions. It’s a huge pain, but at least it’s better than having your shiny new iPhone turned into a big expensive iPod touch.

  • I am using a Canon 640 printer and my MPNavigator will not remain open.  It pops open then quickly closes.  I've used it for several years but it just started doing this.  What can I do to fix this problem?

    I am using a Canon 640 printer and my MPNavigator will not remain open.  It pops open then quickly closes.  I've used it for several years but it just started doing this.  What can I do to fix this problem?

    I had a similar problem with a Canon MP800R under Mac OS X 10.9.2 Mavericks.
    In my case, the MP Navigator app in the dock was linking to the wrong file.
    It linked to Applications > MP Navigator 2.1.app > Contents > Resources > MP Navigator.app, but it should link to the "main" app, probably under Applications > MP Navigator 2.1.app.
    After pulling the correct MP Navigator app file to the dock, I can start MP Navigator again by clicking on it in the dock. However, when clicking on it, a second MP Navigator icon will show up in the dock and stay there until the app is closed. By the way, the MP800R scanner also works (although officially not supported by Canon).

  • I have CS5 and LR5. they will not talk anymore. Everything was working 5 days ago. I can no longer access CS5 from LR5 edit, then drop it back into LR5. Need support

    I have CS5 and LR5. they will not talk anymore. Everything was working 5 days ago. I can no longer access CS5 from LR5 edit, then drop it back into LR5. Need support

    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop ("CS5" won't do for instance; we would need CS5 vers 12.0.2 or whatever) and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    A screen shot could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • I am using OS X and am trying to set up a HP ENVY 5660 e printer and the drivers are not listed.  I read somewhere not to use the install disk.  What do I do?

    I am using OS X and am trying to set up a HP ENVY 5660 e printer and the drivers are not listed.  I read somewhere not to use the install disk.  What do I do?

    Your suggestion was a good one and what I found was that to use this and any other printer I looked at is that I need to update the operating system to a later version.  I have been reluctant in the past to do this after reading update horror stories and since this computer does what I need and very well.  Was glad I moved over from windows and this is the first problem I have had.  Thanks for your help and any other suggestions you may have.

  • TS3293 iPad not backed up message appears and touch screen does not respond

    iPad not backed up message appears and touch screen does not respond

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot

  • I lost all data in "notes" on both my iPod Touch and my new Ipad within minutes of each other.  How can this happen?

    I lost all data in "notes" on both my iPod Touch and my new Ipad within minutes of each other.  How can this happen?

    Where were the devices doing since the content was there and when you found it missing?
    DId you power it off ond then back on?
    Did you reset the iPod?
    I would try resertting the iPod. Noting is lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.

Maybe you are looking for