Printer is overprinting old jobs on top of new jobs.  Using a Mac with OSx and a HP photosmart for over a year.  this just started happening.

Printer is overprinting old jobs on top of new jobs.  Using a Mac with OSx and a HP photosmart for over a year.  this just started happening.

RReset printing system again and the restart in Safe Mode . This will clear some caches,to do this hold down the Shift key when you hear the startup tone until a progress bar appears, after it has fully booted restart normally and add the printer.

Similar Messages

  • My mac has started sending yahoo emails out as if they were being sent from an old gmail account I haven't used in years. Why has this just started happening?

    My mac has started sending yahoo emails out as if they were being sent from an old gmail account I haven't used in years. Why has this just started happening? 

    It is important to understand that Mail uses TWO servers, a Receiving Server and a Sending Server.
    When you create a new mail message, or reply to a message, the Sender server is shown in the message composition window like this:
    That drop-down window allows you to select which of the Sending Servers you previously set up should be used.
    In general, once you choose a Sending server, its choice will "stick" for all future replies to messages from that Receiving mailbox.

  • How do I get my old printer "HP Laserjet 4mv" to work on my newer Macs with OSX?

    How do I get my old printer "HP Laserjet 4mv" to work on my newer Macs with OSX?
    There is no HP support for this old printer. I have tried to connect via ethernet (thru ethernet router), and it does not show up in printer preferences. The printer worked fine on system 9x but when I went to my new macs with system X no luck. This is a great B&W printer that prints at 18 x 24". I would like to keep it and not junk it, but its been sitting on my desk unused for some time now. Any thoughts or JUNK IT! Thanks, R.T.

    Does anyone at Apple have help for this sort of question - I too have an old printer (HP LaserJet 5MP) that I would like to keep using on my Mac. (Mac OSX 10.6.8).
    I got it working by getting a USB cord that connects to it - but every once in a while it just stops working for weeks. The mac 'sees' it and it sends the data because the printer lights start blinking but then it just doesn't do anything. Is there no one who can tell me (and raterada) how to get some new life into these old printers. I would rather not add this (and a new toner cart) to the landfill just yet. . .

  • I created a spreadsheet on my mac with numbers, and now it tells me  I have to buy a newer version of numbers to access the spreadsheet I created with the old program.  if I wanted problems like that I would go back to using windows

    I created a spreadsheet on my mac with numbers, and now it tells me  I have to buy a newer version of numbers to access the spreadsheet I created with the old program.  if I wanted problems like that I would go back to using windows

    Hi sar23,
    You may have inadvertently created or edited the document in the new Numbers 3.0 (which is free; you don't have to buy it) and are now trying to open it with the old Numbers 2.3.
    Both versions can be on your Mac at the same time, and can run at the same time.  The icons are similar so it's easy to confuse them (old on top here, new on bottom).
    The new Numbers 3.0 is in your Applications folder. The old Numbers 2.3 should be in a subfolder in the Applications folder named iWork '09 or similar.
    If you accidently edited an old document in the new version and want to take to take it back to the old version, you can export it:
    SG

  • Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal

    Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal Pre icon, File, Edit, Clip, etc.
    I am planning on purchasing Premier Elements 13, would it be better if I bought a new program rather than download an upgrade, just in case the upgrade doesn't load properly due to the error with my existing program?
    If I the deleted Premier Elements 9 on my PC would I lose all my existing videos that were produced using Premier Elements 9 or would they be saved so that they can still be worked on in Premier Elements 13?
    Does Premier Elements 13 work with Windows 7?
    Thanks
    Terry

    Premiere Elements 13 absolutely works with Windows 7!
    In fact, I'd highly recommend you download the free trial and give it a test run.
    Meantime, go to Windows Update and make sure you have all of the latest Windows updates, including those that don't install automatically. Then go to the nVidia or ATI site and ensure you have the latest driver for your graphics card, and go to Apple.com and ensure you have the latest version of Quicktime, per the program's requirements.

  • Connecting to a HP Officejet 7610 printer when using a Mac running OSX 10.5.8

    Connecting to a HP Officejet 7610 printer when using a Mac running OSX 10.5.8

    Did you download & install the 10.5.8 driver?
    http://www.hp4driver.com/2015/01/hp-officejet-7610-driver-download.html

  • My phone just turned off and will not go back on. my top lock button has been broken for over a year. Help!

    my phone just turned off and will not go back on. my top lock button has been broken for over a year. Help! I have tried plugging it into wall unit and computer but my home button just doesnt do anything!

    It seems that year long delay from having your lock button repaired has finally caught up to you.  Sounds like you have some damage to your phone that requires repair/replacement.  Take it to a Apple store or contact Apple Tech Support.

  • TS3682 how to transfere my apps from my old i-pad to the new one using PC

    how to transfere my apps from old i-pad to my new one using the PC ?

    Ahmoss
    You will need to us a PC with Itunes 11.0.1 installed.  Mkae sure you are signed in to the iTunes store with your Apple/Itunes Id.
    1.  You will need to connect the old iPad and make sure you - offload pictures in the Photoroll, sync the Apps from your iPad to the iTunes etc
    2.  Make sure that the iTunes app library has everything in it and make sure thath the device app folder has all the apps you want in it.
    3.  Make a manual back-up - once you are happy that the key Itunes folders are correct.
    4.  Depending on how you want to proceeed you can restore that back-up to your new iPad or build it from scratch.
    Cheers

  • HT4356 Why has my AirPrint HP printer stopped talking to my ipad2...it has worked for over a year now! It speaks to my laptop!

    Why has my AirPrint HP printer stopped talking to my ipad2...it has worked for over a year now ...it speaks to my laptop.!

    1. Turn off router, printer and iPad
    2. Turn on router and wait 30 seconds
    3. Turn on printer and wait 30 seconds
    4. Turn on iPad and test printing

  • My mid 2011 mac with OSX 10.7.5 will not mirror with my apple tv. No icon at top of page or in system preferences - advice?

    My mid 2011 mac with OSX 10.7.5 will not mirror with my apple tv. No icon at top of page or in system preferences - advice?

    You need to upgrade the OS, go to the Mac App Store to download Mavericks

  • Duplicating files on Top "Level" of HD in Yosemite stuck with PENDING and "X"

    Duplicating files on Top "Level" of HD in Yosemite stuck with PENDING and "X"-- which is incredible as it is happening on both my 2010 MBP-13" and my daughter's brand new MacBook Space gray:
    Go to the highest level on your hard drive --- where the SYSTEM and APPLICATIONS and USERS folders are located.  Now take any file or folder that is there (small or big) and click on it, the either choose "duplicate" or do cmd-d to make a duplicate of that file.  WHAT HAPPENS?
    For me-- the file duplicates but the icon has a progress bar image  along the

    I HOPE THIS HELPS people to see what I'm getting on the top level only:  Here are 2 images -- a before and after:  I have a very plain empty folder called "Test Folder 1 May 2015" in the first one (along with some other folders) and then in the second one you can see I duplicated that folder -- but it now has a progress bar and and "x" showing!  (Just the "duplicated" file - the one with copy in the name).  This is a screen shot (using "Totalfinder" if anyone is wondering).  Same with my daughter's new MacBook (and she has essentially nothing on it, is not using TotalFinder - but the same problem.  Hey, maybe it's not a problem, maybe it's a "feature" of Yosemite or just the way it treats root level folders now--- but I sure would like to get rid of this weirdness if possible without breaking the system!

  • Itunes now requesting PW for old purchases. Current PW does not work. How to fix and gain access to songs purchased 6 years ago. Other, more recent songs all OK.

    Itunes now requesting PW for old purchases. Current PW does not work. How to fix and gain access to songs purchased 6 years ago. Other, more recent songs all OK.

    If you bought the music with another itunes account, then you will have to authorize the computer for that account.

  • HT5312 Someone else has been given my old Apple ID. now I can't use items purchased with that account. How do I get it back or change items purchased by me to my new account?

    Someone else has been given my old Apple ID. now I can't use items purchased with that account. How do I get it back or change items purchased by me to my new account?

    When I requested a new password the e-mail was sent to the old address then the new owner of that address entered their info and I no longer have access to it.

  • I've changed my apple id password, however icloud still only accepting my old password. (though to sign in here, for example, it only accepted my new one). My Mac was stolen and I really wanted icloud to be safe! How do I get this sorted?

    I've changed my apple id password, however icloud still only accepting my old password. (though to sign in here, for example, it only accepted my new one). My Mac was stolen and I really wanted icloud to be safe! How do I get this sorted?

    Welcome to the Apple Community.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")

  • How to transfer I tunes from old windows lap top to new Mac lap top

    How do you transfer your i tunes account from an old windows lap top to your new Mac?

    Drag and drop copy the iTunes folder to a external hard drive on Windows, then take it to the Mac and use iTunes there to import it.
    If you want to read/write the external drive between Mac's and PC's, right click on the drive and format it exFAT or FAT in Windows, not NTFS.
    Some Mac's can read NTFS, but not write to that format as it's proprietary.
    When you format the drive, all data will be erased on it, so make sure before you do so.

Maybe you are looking for

  • Sorting Of Data In Data Manager

    Hi, I am Importing some records into the Data Manager and when i see the records in the Data Manager it is sorted alphabetically . But when the same data is viewed in the portal the last imported entries are displayed in the end, is there some way to

  • Cascade lov in a "form with a report"

    I am fairly new to HTMLDB and struggling with this one. Can anyone help? I have built a test application that uses a form with report, created using the wizard.On the form I have cascaded LOVs( SITEOWNER and SITE) . The second LOV should depend on th

  • I need help, i am having a brain fart and i can' think. Dice rolling Game

    here is what i am supposed to do: write an app to simulate the rolling to 2 Player (Player and Computer) Show each rolling in Map size 50 channel Just like this: Player play frist 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 2

  • Error could not find file/pathurl for id file::QTMRead

    Hi, I'm very puzzled as to this error I have gotten on multiple projects when trying to check back out. Error could not find file/pathurl for id file::QTMRead I'm halfway through a project with a deadline of next week, and have been using edit proxie

  • Does LR/Mogrify work in Lightroom 5?

    I've installed the LR/Mogrify plugin successfully, but when I try to export an image using the Mogrify watermarking options (specifically the burn-in of filename) I get an error message: An internal error has occurred: LrCatalog:withCatalogDo was mar