Printing a Brochure problem

Hello,
I am trying to make a brochure using Page's brochure templet. I managed to make a very nice one (first Time). However I am having a terrible time printing it. I Have an eMac with 10.4.6 installed, HP Business Inkjet 1200 and I am using Pages 06' version. The problem is I have no control over the margins and I have tried page set up with no luck. The printer is cutting off the right side of the brochure. I have tried to make it a PDF and print it that way but I am experiencing printing problems there also. The PDF will not print both pages or multiple pages of the Brochure and the margins are screwed up as well. I can print other PDF documents just fine.
I have tried printing out other templets with success in Pages, however both the Brochure templets tht Pages provide do not print correctly. This leads me to believe it is a page's templet problem. I need some help!
Thanks
Mat

Hi. I’m using Pages 2.0 with Mac OS X 10.4.6. Tried to print the Classic Brochure on an HP Deskjet 940C and an HP psc 1210xi. Am having the exact same problem as Matt Y mentioned. The printer is cutting off the right side of the brochure.
I’ve tried everything I know to get this to print correctly, including saving as a PDF. Strangely enough, the right side of the brochure is cut off when I print from PDF as well! First time I’ve seen that happen.
I should mention that the brochure looks perfectly fine in print preview, both in Pages and in the PDF.
I should also mention that the comments were hidden.
I tried scaling the brochure down from 100%, but this just makes all the text in the brochure completely out of alignment and spread out everywhere.
I do not have this option: “Choose your Paper Size; Select US Letter Borderless.” So, I’ve created a custom Print setup using US Letter with 0.00” border left and right. Still cuts off right side of brochure (no change).
Can’t find anything to do with “Set the "Amount of extension" or stretching in your borderless option to the minimum.”
Any other suggestions, help, or patches to fix Pages software, would be appreciated!

Similar Messages

When I attempt to print trifold brochures I get constant jam warnings

Printing trifold brochures on my 1215CP I constantly get jam warnings.

Internet Explorer, Firefox , Opera and Google Chrome are Browsers. Yahoo and Google, unless you are referring to Google Chrome are not browsers. The browser is what you need to change. there are three images below of three different browsers. You are probably using Internet Explorer. Switch to another browser for a test print.
Google Chrome
Firefox
Opera
Do you understand the term browser as an interface? It is a graphical user interface through which you connect to MSN and Yahoo to browse the internet.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

PDF printer has a problem with Safari in "Reader" mode in Windows7

As shown in the image above. When I try to use the PDF printer to print out a web page in Safari "Reader" mode, the lines near the bottom of each page get squeezed like this. There is no problem with XPS printer. I guess this problem is because of some incorrect settings in Safari or the PDF printer?
My system is Windows 7 Pro. I am using Acrobat X Pro. The page I am trying to print is http://en.wikipedia.org/wiki/Electronic_band_structure. This problem only happens when the webpage is adjusted into "Reader" mode in Safari.

Many thanks for your reply!
I am sorry, I did not make my question clear. I would like to save some web pages only in "Reader" mode, because in this mode all the advertisements are filtered out and the pages look much nicer than the origional layout.
I first let Safari to active "Reader" by clicking "Reader" button.
Then I click "Print" button and select Adobe PDF as the printer.
The problem is the PDF file has something wrong (shown above), and I would like to know how to avoid this problem.

Downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with the

downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with them and then called Apple support and worked with them for 3 hours. No one can figure it out. Is there something wrong with this version? the pdf was created in 2004. Do I have to pay to get Acrobat?

Let me give you a slightly different perspective than everyone else here. You are using an unsecured wireless network, which means that all your network traffic is easily available for viewing by anyone else using that network. That's bad. Very bad, for you, unless you absolutely trust everyone who lives within range of this network. So stop doing it.
As to the Mac not connecting, wireless networking is simply too complex for any reasonable answer without more information. There are many possible error points, and as often as not it's the Mac that can connect and the Windows PC that cannot. Since you can't give us any information about the configuration of the neighbor's network, and can't make any changes to it, we can't do much to help you troubleshoot it.

I am having trouble printing a PDF document. Whenever I click print nothing happens but when I am printing documents from Word, Excel etc they print without a problem. I've tried printing as image but that did not work. I uninstalled Adobe Reader XI and d

I am having trouble printing a PDF document. Whenever I click print nothing happens but when I am printing documents from Word, Excel etc they print without a problem. I've tried printing as image but that did not work. I uninstalled Adobe Reader XI and downloaded Adobe Reader X instead and that still doesn't work. I have Windows 7.

Hello,
Please follow the link to troubleshoot the printing issues with Adobe Reader:- Troubleshoot PDF printing | Acrobat, Reader.
Regards,
Nakul

When I tried to print I had problems.

I got a new Macbook pro yesterday. Brilliant!
I used Time machine to transfer everything. I'm getting used to most things but
when I try to print I had problems.
I downloaded new driver but still no go.
Help please!!!
Kathy

If you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite

Print Color Management Problem ?

I have a print color management problem I cannot solve. It reminds me of the print color management problem I had over a year ago when the compatibility conflict between LR and MAC Leopard produced horrible prints. I have Snow Leopard now and been out of the country for some months and yesterday when I tried to make some prints the same problem reemerged. So I downloaded current drivers (and ICCsfor Premium Luster) from Epson and LR 2.6 and spent a good part of the day with Martin Evening's book. I followed (I think) his instructions to make the basic print step by step but the prints still were terrible. My problem is with the color management pop up in the print settings dialog -- it says "color matching" not color management and I cannot check either "no color management " if I want LR to control the process (Kelby) or check "color sync" if I want my Epson R800 take over. I have no idea where the "color management" pop up went. I'm clueless as usual and probably omitting a step because of frustration or brain numbness. Any help would be appreciated. WJS

The settings in Lightroom are simple. and contain in the Print Job panel in the Print module. You either select manage in printer (and then select the profile in the printer drivers) or select the profile here and then turn of all colour management in the printer drivers. The second option will usually produce the best results. What you don't want is to have the profile selected in both LR and the printer drivers, so if the driver doesn't have an option to turn of colour management then you may be forced down the first route. However it would be an unusual decision for a printer manufacturer to make drivers that can't turn off colour management, so you may wish to ask how to do it to your printer manufacturer or check the printers handbook.

I used to print my photos in my hp psc 2210 printer without any problem. Now it gets stuck towards

I used to print photos in my HP psc 2210 printer without any problem including the 8X11 enlarged photos, but now it gets caught at the end of the printing resulting in shortened images. Does it have to do with the thickness of the photo paper? It was able to do it before. Are there any adjustments to be made?
HMC

Hi,
It looks like you've tried some of the troubleshooting steps listed in this document, but there are a few more to try first. Click on the + besides the XP section and follow the steps in order. See if this helps, if it doesn't I'll look for some more.
Printer Prints Blank Sheets
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP

Printing a Brochure

I'm getting ready to send my brochure to the printers, and they are telling me that I need at least a .25" border and a .125" bleed around the edges to ensure uniform printing. Can someone explain this to me and what I need to do in my brochure to ensure that I have this spacing? I don't want to pay any additional setup fees. One side of my brochure is all black, and the other is all white with text and pictures.
I've tried to follow the rulers at the top and the bottom to align my text and/or images, but the guide does not have an arrow to follow like Pagemaker, so its a bit difficult to align to the size that I need. I'm also having a problem finding out where to set the default margins on my page to accomodate for the proper spacing/bleed.
Thanks for the help!

hi, I'm a graphic designer and send a stack of pdfs to printers... bleed is where the printed items 'bleed off' the page edges, such as a large image or coloured panel etc. The amount needed is so that when the printer trims the paper, there's enough 'extra print' - ie the bleed, so that if the trimmer moves a bit, you still get your bled image off the edges as desired.
A border usually means that this is the area inside the edge of the page where the trimmer might get chopped off - so text and things like that need to be inside - so they don't get chopped off.
The black side will need bleed, the white side not. As they are back to back, the whole document now needs bleed.
Pages isn't anywhere near as high-end (ie trims and bleeds etc) print friendly as say Indesign which does all these things, but looking at it just now, it is possible, but quite fiddly.
Go to the page icon, click on inspector, click on page setup button. Scroll to bottom to 'manage custom sizes'. Here you can add your bleed amount to your page. That is, create a new page size that incorporates the bleed measurements. Click the + button, name it, then change the page size to what you need - add .125 x 2 to width, and .125 x2 to height. You can also enter the border as a printer margin here as well for the white side.
Then go back to page setup and select this larger page size that you just created and named. When you go back to your document, it has moved to top left and the extra space added to right and bottom. Add guides - ie .125 each side and both top and bottom. Move the items on the page within this. You now need to stretch the black background to fill the larger page size - you have added the bleed for the black! Check anything else that may need adjusting - a large pic etc
Once everything is where it should be, do the same to the white side - except nothing bleeds off here, it just needs positioning correctly. Fiddly, but possible.
(These things can all be set automatically in InDesign)
good luck and please let me know if that works for you
david

How to print a brochure in pages?

I created a brochure in pages using a template and when I try to print it, a big white margin in the right hand is created.
Can someone help me to create the real final print format for my brochure?

Pages '09 is the better option and yes it can do a (3 fold?) brochure.
Pages 5 is missing most of the requirements of good DTP, like linked textboxes.
There is quite a range of software available for producing such material. If you need to send it to a commercail Offset Printer, you really need Pro software such as Indesign and Quark Xpress, which are expensive but complete.
All the other cheaper alternatives lack the full features you need for quality work:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=7&mforum=iworktipsnt rick
But given a great deal of effort, experience and sometimes luck, you can make do with some of the amateur apps.
Peter

HP color laserjet 2600n windows 7 printer not installed problem with spooler.

My computer will not recognize my printers. Nothing new was installed, just all of a sudden, they were gone . Have installed new drivers, and had a very knowledgeable person look at it-nothing. Very frustrating. Have a program that has been on it from the beginning and now it won't work (quark). Don't know where to turn. Am doing a windows defender scan for viruses as we speak. Help!!!!!

Could be a lot of reasons. First try to print a supplies status page- If that prints with color on it, you have a driver problem.

Hp LaserJet Printer 1300 Installation Problem

I have Hp Laser Jet 1300 Printer want to plug it with Dell an Thosiba laptop. I have orignal drivers cd with it but, During Installation, its stop and gives error that Unable to install Printer.

Please check the operating system compatibility with your product and try to perform installation with latest drivers:
http://h20566.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&cc=us&lang=en&lang=en&sp4ts.oid...
Please mark the post that solves your problem as Accepted Solution
Click the 'Kudos Thumbs Up' if this was helpful. Thank You!
(Although I am an HP employee, I am speaking for myself and not for HP)

I have HP LaserJet Pro M1536dnf Multifunction Printer and my problem with eprint "Not Connected"

i use eprint but after day show in site massage state Not Connected
to solve this problem turn off printer or hp web services and tern on and it work
but same problem after some hour show not connected
how can printer connected all time ?

Hey sfareg,
One thing you need to check is if your internet connection is intermittent. If it is not, you can follow these steps to give the printer a better connection.
1. Find your printer's IP address by printing a network configuration page.
2. Type you IP address into the address bar of your web browser.
3. Click on the network tab at the top of the page.
4. Look at the left hand side and click IPv4 under wireless.
5. Change the IP settings to Manual.
6. Enter the printer's IP address, your subnet mask, and your routers IP address or default gateway in the spaces.
7. Set the Preferred DNS to 8.8.8.8.
8. Set the Alternate DNS to 8.8.4.4.
9. Click apply.(You may need to refresh the page if it says processing for longer than a min and click apply again.)
The printer should have a better connection now.
Although I am an HP employee, I am speaking for myself and not for HP.
If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

HP LaserJet Pro M1217nfw Multifunction Printer scaner driver problem in windows 7

I have a HP LaserJet Pro M1217nfw Multifunction Printer. Printer is ok but Scaner has problem in Windows 7 scaner driver is deleted when i try to scan it show the error " Scaner not communicate " I have to reinstall driver after few minitus again same problem . Pls advise me what is the best solution for that

Hi KrunalPatel,
I'll paste a link to a troubleshooting document below - from what I've read, it has the best chance at fixing your scanner errors, as it has the most steps to try
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02917811
Please let me know how it goes
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

Unable to communicate with printer; ad hoc problem: Photosmart 6510

I'm running windows 7 pro and I recently installed the aforementioned printer. Please help. 'HP-setup-73 Photosmart 6510,' the name of the printer, is recognized and able to be connected to in my network wireless connections. Firewalls have been disabled and Installation and network config is already set - at least to my knowledge. But when trying to print something, an error window pops up saying: "Unable to communicate with printer...If you installed this printer by IP address, please update the IP address..." That error message could be irrelavant; Perhaps it's a setting adjustment on the printer side. I don't know, that's why I'm asking. what should I do to fix this problem?

Print a Wireless Network Test from the front of the printer (probably the Network or Wireless menu). Does it indicate that your printer is connected to your network?
If so, go to Start > All Programs > Hewlett-Packard > [your printer model] > Update IP address.
If you want a more permanent solution after doing this (so you will not have to do it again), set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Printing a Brochure problem

Similar Messages

Maybe you are looking for