Printing issue new to me

Could not print WCIsland.tif because of a program error. This message appears in a window.
When attempting to print I find the following message in the console.
27/09/10 7:31:58 AM [0x0-0x23023].com.adobe.Photoshop[263] Attempt to release a printing object without first doing a retain!!!
This error message seems meaningless to me, how do I correct the problem. Printing from photoshop has always been problematic but this particular error does not help me solve the problem as I am able to do with other problems.
Help. Thanks

Thanks for the information,
I do not have any idea how to do what you suggest, however I do believe it is a bug. I have been keeping tabs on the entries in the console log and the same error shows up for every print I send to every printer I have. The error message pops up at random times and once popped up continues to pop up until something changes. The change I have used is to reboot my printers.
The printers I use (if this is helpful) are:
Epson PHOTO R2880
Epson PHOTO R1440 (2)
HP Photosmart 5280
Cannon Pixma IP90
The printing results when put side by side are similar enough to satisfy myself that I have correctly managed the WSIWG using Spyder3utility for color correcting my Monitor. I use drivers for the printers and select the correct paper driver for the paper I use.
I would appreciate being guided to know what bit mode (32 or 64) my MacBook runs on. Where do I look?
Thanks, any help immensely appreciated.
PS I am looking at upgrading Photoshop to CS5 but I am not sure this is the best plan as I am doing a large job presently.
Wildbogman

Similar Messages

New airport extreme and printer issues

OK here is the deal
I have the new airport and a hp psc 750 printer. I have a new macbook which can not print on this printer. It will recognize it thru bonjour but will not install the driver - the odd thing is that I have a pc connected directly and a windows based wireless laptop which both are able to print via this airport. I also have an external hard drive that is connected to the airport. All of the computers are able access this drive. So all appears in order except for the macbook-printer issue. I contacted tech support and they claimed driver issue. Anyone have any ideas - I have updated the most recent drivers for this computer and I was able to install this printer via a usb connection. Thanks

There have been a few posts about issues with HP printers working or not working as the case may be through the extreme. I can't remember what they say, but a search for HP in this forum may well help you.
Sorry to be so vague, just thought it might be a start for you.

How are printer issues solved by creating a new login ID in ts?

I have been having printing issues with one user on a terminal Server. I have been trying to figure this out for some time and decided to make a new TS login ID which fixed the issue....At lest appears to have fixed the issue....
Can anyone explain to me how a user's key can leak and cause this types of issues? Or point me to a great article to educate myself...
Thanks,
Andrew
Thanks, Andrew

Hi Andrew,
à
I have been having printing issues with one user on a terminal Server.
Would you please let me know more details of this printing issue? Did you get any error message? Please also
check Event Viewer if can find some relevant events. When this one user has this printing issue, did other users encounter the same issue?
Meanwhile, would you please let me know how deploy printer for the terminal server? Did you configure printer
redirection settings for terminal server connections via Group Policy?
à
I have been trying to figure this out for some time and decided to make a new TS login ID which fixed the issue....At lest appears to have fixed the issue....
Based on this description, this issue seems to be related to the user profile. Just my guess.
If any update, please feel free to let me know. More details (error message, events or others) may help us
to go further analyze and narrow down this issue.
Hope this helps.
Best regards,
Justin Gu

Strange Printing Issue With New HP & Pages

Hello!
I have a very strange printing issue with a new HP printer. I have written pages documents heavy in Texts which are located within tables. The documents print fine on a Cannon and Epson printer and look great but when I print the document on my new HP Laserjet Pro 400 Colour M451nw some of the text on some rows come out of the printer looking like they are bold / slightly fuzzy. This only happens with some of the rows of text, not all of them. The font is the same in every row with the same format.
You can see this in the attached image. The first line (Thanks very much) has printed correctly but the subsequent lines look bold / slightly fuzzy.
After a lot of testing the only way I can resolve this is if I copy the content into a new pages document and only then it will print and look ok with the HP printer.
This must be a problem within my origional document. I would simply copy and paste everything into a new document however this would take a very, very long time (over 5 years of work producing teaching materials and over 100 documents and thousands of tables and formatting that cannot be copied and pasted).
Also, on other printers you can see the lines seperating each row of the table. These lines are not visible on the HP print outs, even when the table is copied into a new document.
Has anyone come accross an issue like this before? Is there a way I can fix this without creating a new document? Do I need to get a new another new printer (the 4th printer this week!)?
Any advise, wise words would be greatly apprechiated!
Thanks!

Sorry, Fruhulda. After 4 hours on the phone with Apple care they are taking this issue further themselves. It seems to be a problem with our pages document and the compatibility with certain drivers. We have still not gotton to the bottom of it and Apple are going to get back to me when they have an answer.
We also worked out that the issue only happens when you print via Ethrenet & USB. Printing via Wifi is ok and there are no quality issues.
Very Strange!

Help me solve color and dark print issue with a new monitor recommendation!

I know, I hate "surveys" too. I'm thinking of attacking my color and dark printing issues w\LR and CS4, by investing in a new monitor. I currently have an 20' early edition Apple Cinema Display. The monitor is the last hardware (software) item in my current upgrade cycle. From those folks who are NOT having color or print problems, what displays are you using (or would recommend)? Ah, and price is an issue. Apologies in advance to those who think this is not appropriate use of the Forum.

Monitor calibration is the first port of call. Sometimes changing one item in a system is enough to show up a colour management issue. You suggest that the monitor is the last item in your upgrade cycle, what all have you changed? Computer, printer? There may also be a setting you have failed to set when you installed the new software, eg. have you remembered to set relative colorimetric with the black point compensation box ticked, disable colour management in your printer driver and put an appropriate colour profile for your monitor onto the new computer? You also need the correct profile for your printer/paper combination set up in Photoshop.
If you haven't calibrated your monitor, that on its own will give you poor prints, but all the other bits are needed also.
Jo

New MacBook Pro has real printing issues. Is it just me??????

Hi
I love my MacBook Pro but I am having horrible printing issues.
When I move my MacBook Pro from work to home I have to reboot everytime to make printing work otherwise I get error messages printing from Safari. Microsoft Office docs will print BUT only if I press the print button, if I go via the print menu I cannot press the print button.
This is causing me all sorts of pain.
Printers are an HP PSC2500 at home and an HP PSC2700 at work.
Machine was all 'transferred' from a Powerbook 1.67Ghz that was working perfectly.
Does anyone else have this problem or any idea what the fix could be??????
Cheers.
Robin

Try Reset Printing System, a manu choice in the Printer Setup Utility.

How do I tell the printer the new SSID and wireless key?

Hi,
I have a HP Laserjet Pro Color MFP M175nw and it works beautifully. However, today I replaced my wireless router and thus have a new SSID and key. I cannot figure out how to tell the printer the new router info - it must be very simple. Please help!!!

Hi @wirelessfun,
I understand that you need the printer setup on the new router. I can help you with this.
Restore the printer's network defaults first.
Touch the Setup button. (wrench)
Select Network Setup Menu.
Then select Restore Defaults.
Print out a configuration report to make sure the IP address is 0.0.0.0.
Printing a Configuration Report.
Select Method one under the operating system.
Follow these steps to setup the wireless:
On the printer touch the setup button, (wrench) then select network setup menu, select wireless menu, select wireless direct and turn it on.
On the computer, in the bottom right corner click on the wireless icon and select the printer from the list to connect to. Then open Internet Explorer and type in the IP address (192.168.223.1) for the printer in the address bar.
This will load the embedded web server for the printer.
Select the networking tab, wireless on the left hand side.
Fill out all your network information, select infrastructure, select your network name, put in password and type of encryption. Apply settings.
Click on the wireless icon and connect back to your network name.
Print out a configuration report to make sure the IP address is valid. (192... or 10....)
Run the installation again or run the add printer wizard from the devices and printers.
Test the printer.
Let me know how this goes for you!
Have a great day.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Unable to install hp Color LaserJet 3600n network printer on new Windows 7 (64bit) PC.

Unable to install hp Color LaserJet 3600n network printer on new Windows 7 (64bit) PC. According to Microsoft Windows Compatibility Center website (http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=HP%20Col...) this printer is compatible.
I have tried everythingto no avail. HP will not support and have, very little online resources addressing this particular issue. What should I do?

This may help: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02538616&lang=en&cc=us
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Printer issue after installing Mountain Lion

Hi, a few days ago I posted the following question regarding a printer issue and so far I have not been able to fix the problem. Here's the original question and I will continue the explanation after this....
Hi, I am a fairly new iMac owner and I am really happy with my apple, however I have an issue with my printer and I kind a "blame" Montain Lion for it. I have been using this HP Laserjet P2015 dn printer for a long time, initially with Windows and now with iMac. The first year approximately there was no problem at all to print and the transition from Windows to Mac with the printer had no difficulties at all. It was connected wirelessly via router. After downloading Montain Lion I notice the printer intermittently lost connectivity. The only way to print was turn off and turn on and it will print fine until the next time. Now out of the blue it's doing the same thing so frequently I can't print a complete document at all. It starts, and finish without printing the entire document or not connect at all. I have tried everything, including a static IP address for the printer, connect the printer to the computer via USB, downloading all the printer updates from HP and nothing seems to work. Just now, I did it again (for 100 times so far), delete the printer, reinstall and it's doing the same thing. It connects fine (either via IP or USB) and it last connected only for a minute or two. That's it. It's a shame, because I like the printer. The printing quality is great and to add more pain, I recently got a new ink cartridge ($100.00) capable of printing 3000 pages. It has 70% of ink still. Any computer sabby person out there has any ideas for me? Like I said, I've done everything.... inluding,
1. Remove the printer
2. Update the drivers
3. Assign a static IP address to the printer
4. Connect via USB
5. Disconnect the printer for a while and restart the whole process again
6. Did a "cold start" to the printer
I don't know what to do, and I don't want to spend more $$$$$ on a new printer. Is Montain Lion to be blame for? Please advise me.
Any help will be greatly appreciated.
At this point I do have the printer connected only via USB, prints one page (perfectly) and then goes offline. Before installing Mountain Lion I did use the printer with my Mac for almost a year with no issues at all. I even downloaded Mountain Lion again thinking of any flaws during initial installation. I've done all the updates, drivers, uninstall, re install, repair disk permission, static ip address....you name it... I've done it all and nothing seems to work. What makes no sense to me is that prints so great only one page and then is gone.... I would be happy to know the printer is dead and go get a new one but in my mind if it prints ok one page it still works. I don't want to have a new printer and find out it does the same thing. I can't keep myself away from blaming Mountain Lion. IS THERE ANY WAY TO REMOVE MOUNTAIN LION WITHOUT THE RISK OF DAMAGING THE COMPUTER???? PERHAPS GOING BACK WILL PROVE ME MOUNTAIN LION IS THE CULPRIT. Just saying... I am totally frustrated. I guess the next step is to get a baseball bat and fix the printer once and for all.
Any help will be greatly appreciated.

Any fix for this? I have the same problem after upgrade. It's off by many seconds. Thank you.

Printing issues with HP 310a All in One Printer

I have a new HP 310a. Looks good, fast on text printing, but features such as merged envelopes and printing letters on A5 stationery do not print correctly; nor in correct order. Photos print larger than they actually are and look like they need to be cropped. Anyone experiencing the same?
Photo tray has nothing to hold paper in place (except on sides); and when tray enters printer, the photo paper slips backwards and error message "out of paper" appears.
This is the last time I will buy an HP product

Hi there,
Welcome to the HP Forums!
I understand that your HP F380 has stopped printing in color, and I am happy to help you with this printing issue!
For further assistance, I will need to know the following:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is able to make copies by itself.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please take a look through this guide. Streaks or Lines in the Printed Image.
Hope to hear from you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Printing issue with Electronic Signatures

In the footer of my document, i place document properties and also use the captioning feature for tables and figures. I have saved it in native 2010 format not in a compatability mode.
When I print my document (paper or PDF) these fields print properly.
After I electronically sign the document and look at the document on the screen, the fields and caption numbers (Table 1-1: Intended Audience) appear correctly. When I print to PDF or paper, the numbers disappear (Table 1-: Intended Audience) and they
also disappear from the screen.
When I close the document and reopen it, the fields are correct. It only changes after the document prints.
Using Microsoft Office Professional Plus 2010 Version 14.0.6023.1000 (32-bit).
(--merging--)
The original document was a 2007 document opened/stored in the 2010 format.
Reproduced with new 2010 document simply by creating two properties:
Template Version - Test - Value 1.0
Template Date - Date - Value 1/25/2012
And doing the following:
Using the default Normal template with calibri as the font
Added a heading level 1 to the document
Added a 2x2 table with Insert Caption including the chapter number based on heading 1 below the table
Added the template version and template date as two lines on the page
Inserted a signature line
Created a footer with the template version, page number aligned center (via tab), template date alighted right (via tab)
Printed without signing and all data was present (Table 0-1: Test)
Signed the document and printed. The following was missing:
The template date in the footer.
The table label was Table 0-: Test
The template date was present in the middle of the document

Hi,
Is this problem only affect Word program with Electronic Signatures?
Please try to test Printing with different printer drivers.
If the Word printing problem occurs only when you print documents with a certain font or a certain type of graphics image, try to print to another printer.
If no other printer is available, contact the manufacturer to find out whether there is an updated version of the driver or a different driver that works with your printer model.
You may also follow other methods in this KB article troubleshoot print issue in word:
http://support.microsoft.com/kb/826845
Best regards.
William Zhou
TechNet Community Support

Printing issues in production

Hello, I
We are having some printing issues with the term contract (ME21N) in production although everything is working fine in all other systems. I created a new term contract in production and when saved it stayed in my spool and failed to print immediately. I then printed a different FI document in production (that launches the print daemon) and it printed fine to the local printer, without closing the print daemon window I tried printing the term contract and it printed fine this time. So it appears that somehow in production the print daemon window is not able to launch when a term contract is created/saved.
Any idea or any suggestion?
Thanks,
Rajat Garg
Edited by: rajatg on Jan 24, 2012 9:45 PM
Edited by: rajatg on Jan 24, 2012 9:46 PM

Thanks a lot for the reply.... I further looked into the issue and when I looked at the SPOOL using SP01, I found that the spool request was there but the status was "ERROR" , when I looked at the events of that particular request, one of the even has this message->"Consistency error: Invalid program status"
Although I looked at the the output of the purchase order I see the following:
Status -> Green
Output-> NEU
and Dispatch time -> 4 i.e. Print Immediately when saved
According to me everything looks ok... can you please let me know if I am assuming a anything wrong here.
Thanks,
Rajat

Reader 10.1.3 Kyocera Print Issue

Hello,
we are experiencing an Print-Issue in one of our field offices in Austria.
After we deployed Acrobat Reader 10.1.3 (from 9.5) the employees in this Office were no longer able to print on an Kyocera FS-C5015N(via Network), when they try to print any PDF they get the following error message : "Adobe reader has encountered a problem and needs to close"
Because this Kyocera is only in this office we cannot reproduce this Issue somewhere else.
We are running Win XP Sp3
There is no other PDF Software installed
What we already tried :
- Re-Install Acrobat Reader 10.1.3
- Re-Install Printer on the PCs
- Re-Install Printerdrivers
- Re-Configure Printer Settings
- Re-Configure Printer Network Settings
- Disable "Protected Mode on Startup"
- Disable "Show PDF in Browser"
- Enable the "Print as Picture" setting
- Different PDFs,
- When we Print to another local Printer there is no Problem(but thats a small&slow one and just our Emergency Solution)
- After we Re-Installed the Printer on the PCs the first printing attempt works without Problems
- Tried to print over the Network from my office (Vienna) on this printer -> same Problems
- Also some other "tricks" the local IT-Expert tried
So my question is, if anyone is experiencing the same Issue on this Kyocera or any other or can give me any Feedback according this Problem.
Thanks !
Dominik Brinnich
AMOS AUSTRIA GMBH
Information Management
[private information removed]

This is a public forum; please do not post your email address or other private information.
Regarding your issue; it appears you have already tried everything possible - I have no other ideas what to try with 10.1.3.
The only solution for now I can see is to revert back to 9.5.1; is this a problem for you? This should be only temporarily until a new version of 10.x or 11.x becomes available.

Print Issue in VS 2010 Crystal Report Version 13.0.1.220

Hi Friends,
I am new user for SAP crystal report,
can any one help me for
Print Issue in VS 2010 Crystal Report Version 13.0.1.220

Font must be True Type and on the WEB server where the report is being processed.
Run Process Monitor and see if your app is loading the Font....
Typically if the characters show up as a box it means either the font you are using does not support UNICODE characters, it's not installed so font substition is done but the font used doesn't have the Glyph's required or there is a permission issue with the font being instlaled under a local User account and should be installed under the Admin account.
Also, Search for Font and Windows Framework, there are known limitations with .NET Framework and some fonts.
What font are you using?
Don

My unusual (?) printer issue -- Prints only partial lines when printing in black (part 2)

I have been using my HP Officejet J4680 with my Win7 PC for several years and relatively problem-free -- until about six months ago.
My printing issue might be rather odd. So odd, in fact, I’m not sure how to succinctly describe it. I’m not too techie, but I will try….
This printer will print some lines correctly, other lines print only partially, and some lines don’t print at all.
This oddity happens ONLY when I print in black. When changing the color of the text to any other color other than black the page does print correctly.
Further, this issue seems to occur ONLY when printing certain things/files/formats. For example, material from most websites will print correctly. As will most .PDF files. Printing files such as .txt, .doc, .wps, etc., seem to be the most problematic.
Fixes I have tried include:
Uninstalled and reinstalled printer
Run HP’s diagnostic tools (including checking for any driver updates)
Installed several new black ink cartridges
Cleaned and re-aligned printer head
Lastly, the “copy” feature continues to produce good results. These problematic symptoms seem to occur only while using the “print” function.
Short of relegating this printer to the trash, I’ve tried everything I can think of. Help/ideas/suggestions appreciated.

HI Here4Help2,
Here is a document to troubleshoot poor quality black text for your printer. This is a pretty interesting problem you have here. Let us know if this helps or if the problem remains.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Printing issue new to me

Similar Messages

Maybe you are looking for