Printing issues with D1455 and Airport express

Hi, I'm having problems printing with an HP Deskjet D1455 and the airport express. The printing always halts after printing half the page.
Attached is another post related with this problem:
"HI,
i just purchased the Deskjet 1455 and connected to the airport express for wireless printing. I followed the instructions of installing printer on windows with bonjour on the Apple website. After I get everything set, then I started to print, but it stopped while printing(It prints half of the document then stop). In the computer status says ''error'', and it is the same thing when I trying to delete it.
The printer works when I directly connect to the computer.
I want to use wireless printing, how to solve this problem? THANK YOU!"
http://discussions.apple.com/thread.jspa?threadID=1492845&tstart=0
Does anybody knows how can I can solve this?
Thank you.

I came across your question and wondered if you could help me. I just bought a macpro with leopard and am having a heck of a time getting it to work with my design jet 800ps which is connected by usb cable. I installed the driver for the printer from the leopard cd but to no avail. The printer shows up in the printer list but when I send a file nothing happens. I have been on the phone with HP but nothing seems to make a difference.
Thanks much

Similar Messages

Speed issue with TC and Airport Express 802.11n in WDS mode...

Here is my problem.
I replaced my older base station / Express duo with
a new Time Capsule (1TB) and a new Airport Express (802.11n).
I set up the network with the TC as base station running a WDS network (WDS main) and the Express is the WDS remote.
When I check the wireless clients from the TC, I find my iMac running at 130Mbits and the Extreme at 54Mbits.
No other wireless clients are connected to the network (I kept my slower network as a parallel one for my "older" Macs).
The only other connected device is my Dish network DVR that is connected via an Ethernet cable directly to the Express.
So my question is why does the Express not communicate at >54 speed rate with the TC?
And, why does my iMac connect with 130 and not with 300Mbits?
Any thoughts?

Instead of using WDS, you should take advantage of the "Allow this network to be extended" option that is available for the 802.11n AirPorts including the TC. WDS only operates in the 802.11g radio mode.
Here's the basic setup:
o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
o Open AirPort Utility and select the base station that will connect to the Internet.
o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
o Click AirPort in the toolbar, and then click Wireless.
o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
o Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
o Enter the base station network and base station password is necessary.
o Click Update to update the base station with new network settings.
(ref: Page 46 of "Designing AirPort Networks Using AirPort Utility).

Are there any compatibility issues with Sonos and Airport extreme??

are there any compatibility issues with Sonos and Airport extreme??

Sonos uses its own priopietory wireless protocol SonosNet to distribute audio data among all its products, thus it should not affect other network devices which use standard WiFi 802.11a/b/g/n protocol at all though they may share the same radio channel for wirless signaling.
On my dual-band (5 GHz / 2.4 GHz) Airport Extreme staion, I select the option "802.11n Only (5GHz) - 802.11n (2.4GHz)" and turn on "Use wide channels" in Wireless configuration in order to use only 802.11n protocol and more radio channels to achieve maximum wireless bandwidth of 400 Mbps. This bandwidth is necessary for quick Time Machine backup to NAS connected to the Airport Extreme station through Ethernet cable. So my iMac and MacBook Pro always connected to the Airport Extreme through 5 GHz radio channel with 802.11n protocol whereas my iPhone 4S always connected through 2.4 GHz radio channel with the same protocol.
In my living room Sonos ZP-90 (same as new CONNECT model) zone player is connected to Airport Extreme directly through Ethernet cable (recommended by Sonos) and Sonos S5 (same as new PLAY:5 model) zone player in bedroom is connected wirelessly through SonosNet protocol to the ZP-90 zone player in living room.
These devices are in operation simutaneouly most of the time. Music is playing through the Sonos ZP90/S5 zone players througout the day, I am streaming viedo through Internet (fibre broadband 25 Mbps) on my MacBook Pro in bedroom or iMac in living room or reading news on my iPhone. So far so good and have no encounter any interference problem for about three years. Further more bandwidth for 802.11n protocol does not seem to be affected at all.
In fact with a low power Fujitsu USB drive (2.5" / 500 GB, designed for notebook) plug into USB port of Airport Extreme, it can be used as NAS drive for Sonos music distribution system without any problem. Just transfer all files from Music folder in my home directory on iMac into this NAS drive and set it up as music source in "Manage > Music Library Settings" in Sonos Controller for Mac application will do. Though the same drive can be served as Time Machine's backup disk as well, an independent full-fledged NAS drive for Sonos and Time Machine backup is better long-term solution for reliability and performance. With the NAS configured as sole music source, you do not need to keep any computer powered on all the time in order to play music through the Sonos system.

Printer not working with Leopard and Airport Express

Hello!
I have seen that this is a common problem but I've tried several solutions that seemed to work for others but still not for me.
I have a Macbook Pro unibody and airport express with OS X 10.5.6. I used a Samsung CLP-300 wirelessly though my airport express (with Tiger on my older macbook). The printer works fine when it is plugged into my USB on the Macbook but not on the airport.
Here is what I've tried in the past 8 months:
- update the Samsung printer driver
- used "fixairport"
- configured HP IP with airport local address
- spent 2 hours on the phone with apple
None of this seemed to work. The printer will print the first page and then any subsequent pages it gives me an error host message.
If anyone can give me an idea of what did work for them in this situation, or maybe I'm doing something wrong, please let me know. It would be greatly appreciated.
Steph

kelscan, Welcome to the discussion area!
You need to reconfigure your AirPort Express (AX) so that it joins the wireless network provided by the "modem". Follow the directions in KB 302153, AirPort Express: How to join an existing wireless network in client mode.

Dumb with Wirless and Airport Express

I have thought about purchasing an airport express for a while so that I could play music from my desktop which is connected to a cable modem on my component stereo. By a stroke of Christmas spirit a friend of mine gave me his airport express because he no longer needs it.
In order to do make this work, do I need to buy a router and a wireless usb adapter for my desktop despite proximity to modem…. Or can I get by with simply the wireless USB adapter and airport express.

In order to do make this work, do I need to buy a router and a wireless usb adapter for my desktop despite proximity to modem…. Or can I get by with simply the wireless USB adapter and airport express.
Good news, the AirPort Express Base Station (AX) is a wireless router so you don't need to acquire another to make this work. However, you will need to add wireless capability to the desktop.
Your network configuration would be something like the following:
Cable modem > (Ethernet cable) > [Ethernet port] AX > (wireless) > PC, AND
AX [Audio port] > (Audio cable) > Stereo
OR
Cable modem > (Ethernet cable) > [Ethernet port] PC > (wireless) > AX [Audio port] > (Audio cable) > Stereo

Ipad 3 has intermittent issues with airplay to airport express

Hi
I have difficulty streaming from ipad 3 to my airport express, its very intermittent.
Neither my iphone or my mac have trouble

Hope this helps others who are struggling to get the most out of their airplay devices.
After I spent a couple of hours talking to Crutchfield, Yamaha and Century Link I think I figured it out, at least in my case. Thanks to Google I was able to find some posts that pertained to my particular Century Link modem router. Evidently the modem that I was provided has a bug that has yet to be corrected with a firmware update that when set up for Auto Channel it doesn't necessary find the "best" channel. So after reading this I hooked into my modem and saw that it automatically connected to channel 8. I read some stuff that said typically channels 1, 6 and 11 are the best for what that is worth. I changed this feature to override the automatic channel selection and chose channel 6 (which was a suggestion I read online) and I have been streaming various music sources (spotify and Pandora from my ipone 6 and ITunes from my iphone 5 and 6 and from my PC) for several days and countless hours and not ONE skip. I couldn't be happier.
How Crutchfield, Yamaha or even Century Link couldn't figure this out is beyond me but at this point I don't care because my setup is finally working has I hoped it would. I am just keeping my fingers crossed that this performance issue doesn't come back.
Hope this helps someone.

Sharing Music with Computer and Airport Express at the same time?

I just purchased and set up airtunes with some powered speakers.
I cannot figure out how I can play the same music at the same time to shared computers and the Express Powered Speakers at the same time.
Can you help me with configuring instructions please?
iMac G5 with Airport Extreme and DSL w/ iTunes pointing to external hard drive music library.
PowerBook G4 in the kitchen wireless can share music when computer is selected.
Powered Speakers on the screen porch with Airport Express connected can only play music when Express is selected.
How do I fix this so that when we have a dinner party we have the same music in the office, the kitchen and the screen porch all playing together at the same time?
Thanks.
I hope my question is clear as I really would love to sort this out before our party.

Although your problem is slightly different, it seems that you are having the exact same issues that I had just two days ago - solved for me by Felix. If you check the link below, it goes through what I had to do, which was basically to update the software on my airport express base station, which he explains well:
http://discussions.apple.com/thread.jspa?threadID=476631&tstart=30
When I did it, it then gave me the option on iTunes (check the picture at http://www.apple.com/airportexpress/airtunes.html to see the magnified bit on iTunes) and then I could just choose multiple speakers concurrently.
Hope this helps.

Printing issues with Word and embedded excel

we are using word 2003 with embedded excel blocks. The issue is we have a 9040n printer in one office where the document is created, but when we come to another office and try printing the word document on a 9050 printer, the document looks different. I've tryed using current pcl 6 drivers on both printers with no luck, and now if have ther 9040 PCL 6 driver on both printers with the same issues happening? Any Ideas, please help!!
Brad

I came across your question and wondered if you could help me. I just bought a macpro with leopard and am having a heck of a time getting it to work with my design jet 800ps which is connected by usb cable. I installed the driver for the printer from the leopard cd but to no avail. The printer shows up in the printer list but when I send a file nothing happens. I have been on the phone with HP but nothing seems to make a difference.
Thanks much

Smart form printing issue with LOCL and SAP printer

Hi,
The issues are as follows:
1. the top portion of the Invoice and PO does not print when using the SAP printer (works when using LOCL)
2. the shaded areas of the Order Confirmation and Invoice are black when printing to a SAP printer (works when using LOCL)
In an attempt to correct the printing issue is was suggested that we change the SAP printer device type from HPLJ4 to POST2. This did address the problem where the shaded areas were black but then we received reports that other reports printed "garbage". Its possible that using POST2 device type causes issues when printing to HP compatible printers.
Apparently all the testing was done using the SAP printer LOCL and not the SAP printer name and SAP spool system. LOCL uses the SAP GUI and Windows system to produce the output. Our production users at the plant site and Toledo are using SAP defined printers with the device type of HPLJ4. HPLJ4 is our standard here as OC for our printer definitions and we have HP compatible printers installed in our Toledo location and all of our remote sites. We need to be able to correctly print the Invoices, Purchase Orders, Sales Order Confirmations on our SAP printers.
What can be done to the reports to allow them to print on our HPLJ4?
Thanks, Prathap

Hi Prathap,
Check the background shading of the windows of the Smartform where you get the black boxes. If it is set something like this:
   Color: White
   Saturation: 100%
this can be the problem.
I know it is strange but some black and white printers cannot handle this setting. They only know one color black so the ignore the color setting and just take the saturation 100% setting.
The reason it works with local and device type SAPWIN is that the print data is created in Windows and sent to the printer as graphic.
Please change the shading for window MAIN -> tab 'Output Options' to:
   Color: Black
   Saturation: 0%
and this should resolve the problem.
Then create a new spool and check if the problem is resolved. See SAP Note #400050.
Regards,
Aidan

10.4.8 update - issues with mail and airport

Gah! Just as I was signing up so I could post on this board, my airport connection went bye-bye.
Initially I tinkered with my router (linksys) settings. Recycled everything a bajillion times. Not sure what caused a partial resolution, but my connection is no longer crawling, but it drops a few times a day. The only solution at this point is to recycle modem and router and restart computer.
Now I am having issues with my mail application. Whenever I "get mail" I am prompted for my password. I type it in, plus check the box "add to keychain". App searches for mail. So I went into account prefs and noticed there is no password in the dialog box. I type it in. If I save and close the dialog and then reenter, the password is once again missing. Huh??
So I reinstalled with the combo update (I had previously installed via software update), verifying/repairing disk before, repairing permissions after.
I have removed the system config folder in order for the system to create a new one.
When I look in keychain access, the only thing in there is the airport login. I have also performed a keychain first aid. Nothing appears to be wrong.
Any suggestions??
I patiently await responses.
Oh, and I applied the first update in proper fashion as well. No weird third party stuff, etc. And I didn't have any of these issues pre-update...
mbp Mac OS X (10.4.8)

1. Reset the router by holding down the button in the
rear for 10 seconds.
I've done that ad nauseum, plus tweaked router settings, plus recycled modem/router many times. It does not appear to be a problem with the router hardware or software.
2. Toss your Mail Account, and make a new one.
If indeed that is the solution, is there an efficient way to save/export messages so I don't lose them?
mbp Mac OS X (10.4.8)

Another issue with Mac+PC & Airport Express network

Okey here's my problem. Yesterday i got my very first Mac (iBook 12") and i'm very happy about the computer in general. I also have Airport Express wireless base station. My other computer is table-PC and it has Planet WL-8314 PCI wireless card in it. I have ADSL-modem that i used with ethernet connection.
Now i want to connect Airport Express to ADSL so that both computers could get wireless internet connection and PC could be able to connect to speakers with Airtunes.
iBook connects to Airport Express very easily. No question there. But my Windows XP (service pack 2) PC is driving me crazy. I have configured the network using the admin utility from iBook. I've tried fully open network, use mac-address, WEP and WPA, but nothing works. I've installed Airport Express applications to windows as well but it doesn't connect.
Here is my current settings (Hope i can translate them correctly to english, i'm using finnish).
Encryption: WPA2 Personal
Encryption type: WPA OR WPA2
Connection: Ethernet
DHCP is in use
Share IP-addresses "checked"
by sharing one IP-address (DHCP and NAT) (use 192.168.1.1. addressing)
As i said i've disabled encryption, used mac-addresses and even made it fully public but nothing helps.
When i configure Airport Express from iBook my PC shows the network and does recognize the name of the network correctly and even if there is an encryption in use or not. If i'm using WPA and trying to connect, my PC asks for password but when i give the correct password it just stays stuck - nothing happens. The same thing when i try to connect without any encryption and passwords. It just tries and tries and tries... and fails.
This feels pretty hopeless. And the weird part is that yesterday i got it work for maybe an hour or so. Then Windows crashed and when it loaded again the same settings did not work anymore. So there are really weird things happening. And that period when it was working the admin utility worked in PC as well.
So any ideas what i could do. I'd really apreciate any help that can guide me to make my network fully work. So far it works perfect only with iBook - well better than nothing .
iBook G4 Mac OS X (10.4.3)

The connection i managed to establish last night didn't last very long. When i restarted Win XP, the connection was lost again. Anyway now i think i have solved the problem. All i had to do was to not set Windows XP take control over wireless network configure. This was done through unchecking one option. Then i could open wireless network adapter's own configuration tool and establish a connection to Airport Express wireless network.
So basically i had to punch Windows XP's native tools down in order to get the connection work at all. It just amazes me why such feature exists if it doesn't work.. Anyway i'm happy now and hope this discussion with myself in this thread might help some other as well .
iBook G4 Mac OS X (10.4.3)

Audio sync issues with Optical Toslink Airport Express

Hello
I have 2 airport expresses. One connected via mini to RCA to some Logitech speakers.... And the other via mini to Optical into my Bose T20 receiver. The Bose is def a few milliseconds behind the Logitech and my computer..... Probably due to the optical cable in the Bose receiver.
Am I to to understand switching to the RCA in the Bose should correct this delay?.... The price being losing on digital audio quality in place of analogue?!!
Can someone please advise if I can somehow get the Logitech connected airport express to have a delay so it syncs that way?
Appreciate any help.
Cheers

At this point I would recommend that you look for signs of Wi-Fi interference that may be preventing your Express from providing the best signal possible ... even in the same room.
An excellent tool to measure signal quality, built into OS X Mountain Lion, is the OS X Wireless Diagnostics:
Option-click on the AirPort icon on the OS X menu bar.
Select "Open Wireless Diagnostics..."
Enter your Mac's Administrator credentials in the next window.
On the Wireless Diagnostics window DO NOT click on "Continue." Instead, go to the diagnostic's menu bar, and then, select Window > Utilities
Start the test with the laptop near the wireless router. Note the values for RSSI and Noise. They should both be negative and measured in dBm.
Now take the laptop to the other locations that you want to access the Internet in your home. Different rooms, different floors, etc. Again, note these same two values at each of these locations.
When you have finished collecting the data, you will want to enter them into the following formula for Signal-to-Noise Ratio (SNR). SNR = RSSI - Noise. For example, if your get the following readings: RSSI = -61 dBm and Noise = -84 dBm, SNR = (-61) - (-84) = 23 db
To get decent wireless bandwidth performance at a location you will want the SNR value to be 25+ dB.

Choppy YouTube Playback with MacBook and AirPort Express

I recently purchased a brand new 2.1 Ghz Intel Macbook (white) with extra memory and immediately connected it to the internet using the AirPort Express 802.11n. I have experienced no problems thus far except for extremely poor internet streaming video playback. YouTube videos stop to load every few seconds. I didn't have this problem with my old PowerBook G4, and like I said, everything else seems fine - pages load normally and downloads are very quick. I have installed a new version of Flash and done a couple of other suggested tricks but nothing seems to help. Any suggestions?

See http://discussions.apple.com/thread.jspa?threadID=309565&tstart=0

DNS Server Issues with Comcast and Airport Extreme wifi routers

I am having significant challenges with 3 Airport Extreme (latest gen) wifi routers and my Comcast Xfinitity service. It once worked just fine, but now I continually get the blinking amber lights stating "No DNS servers" for each of the Airport Extreme (AE) routers. My configuration is:
Coax cable -> Comcast Xfinity cable modem -> ethernet to 16-port gigabit ethernet switch ->->-> ethernet to 3 Airport Extremes around the house direct connected with switch
I have many wifi devices throughout the house (iPads, MacBooks, home automation devices) as well as direct-connected devices via ethernet (one PC connected to AE router).
Each Airport Extreme router is set with these settings in the Airport Utility app:
Internet tab= Connect using: DHCP
Wireless tab= Network mode: Create a wireless network
Network tab= Router mode: Off (Bridge Mode)
I have attempted to put the Xfinity cable modem in bridge mode, and use the Airport Extreme to serve up the IP addresses, but still lost internet connectivity.
I have also attempted to set the Network tab=> Router Mode to "DHCP and NAT" but get "Double NAT" error issues as well.
I have tried using the Comcast DNS server addresses (75.75.75.75;75.75.76.76) setting on the Internet tab for the routers and do end up getting a green light, but NO internet connectivity.
Lastly, I have tried using the Google DNS servers (8.8.8.8;8.8.4.4) setting on the Internet tab the routers giving me the No DNS servers amber light error and again, no Internet connectivity for either wifi-connected or even ethernet connected (directly to Airport Extreme router) devices (like my PC) despite getting a green light on the router.
Any this point, it really seems that these AE routers are NOT compatible with the Xfinity cable modem or service… (and yes, I've tried power-cycling and restarting the modem, and then the AE routers, MANY times to little avail).
Should I move one of these Airport Extreme wifi routers to before the switch, and have the other 2 in Bridge mode after the switch? Do I need to setup a specific range of DHCP reservation addresses for each different AE router?
Appreciate any insight anyone can share with this aggravating DNS server issue between Comcast & multiple Airport Extreme wifi routers.

I do not see anything wrong with your basic setup.. the issue is indeed the WAN ports of the AE.. AC version are having problems with some network equipment.
You have listed a stack of things you have tried.. but I want you to move the ethernet patch cable you use on each AE to its LAN port instead of WAN.
Restart the airport when you do that.. and then see if it becomes stable.
In bridge mode the airport moves the WAN port to LAN.. but the WAN port setup itself seems more problematic than the LAN ports.
There are other methods we can try if this does not work.. but in the end.. I would be tempted to take the whole lot back to apple.. they need to start making equipment that works with standard modems and switches.
BTW what brand is the 16 port switch?? Does it happen to be managed (smart type)?

Print issue with eprint and iPad mini

Eprint has stopped working on my iPad mini. It used to work fine. It says, "Photosmart C6200 series doesn't support this file type". Yet, I can print the same file from my iphone 5 s with no problem. I tried deleting and reinstalling. It didn't help. The printer is WiFi.

Hi Jan14,
Welcome to the HP Support Forums. I understand that you are getting an error message on your iPad when trying to send a print job to your Photosmart C6200 series printer using ePrint.
Please follow the steps in the section titled “What if a 'No AirPrint Printers Found' message displays on my Apple device?” from the Printing Over a Wireless Network with Apple's AirPrint FAQ document. For the step where you are asked to turn the iPad off, please reset your iPad instead using the steps in Apple’s Turn your iOS device off and on (restart) and reset document. This should allow you to print using ePrint again.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Printing issues with D1455 and Airport express

Similar Messages

Maybe you are looking for