Printing to a Imagesetter (Platemaker) from PageMaker 6.5 on Windows 7 OS I get a message from the platesetter there is no process on the other end of the Pipe Any Ideas

I am running PageMaker 6.5 on a Windows 7 OS. I can print to all my printers except one. It is a Platesetter or sometimes called an imageseter. When I send a file to it, it gives me the message "No Process On The Other End Of The Pipe". I have installed and downloaded all PPD's and such and installed them the same as they were previously installed on a Windows XP PC when it worked great. Any ideas?

Go back to XP. PM has been for more than 10 years and is unsupported under XP. In fact, 6.5 has support only for Windows 2000 and earlier.

Similar Messages

My printer works great but I keep getting error messages from HP Solutions Center

I'm using an HP Officejet J6480 All in One Printer on a Windows 7 64 Bit machine. The printer works great but I kept getting error messages from the HP Solutions Center every 15 seconds that popped up making it impossible to do work on my laptop so I uninstalled the Solutions Center to try to fix the problem. Now the printer won't print. Is there a way to re-install the Solutions Center and get rid of the pop up error messages?

hello Danagriz, unfortunately the plugin check page lags behind. adobe has released a critical patch for a vulnerability in its flash plugin, which is reportedly already exploited in the wild. therefore firefox will block insecure versions from running by default on websites for your protection.
https://helpx.adobe.com/security/products/flash-player/apsb14-27.html https://addons.mozilla.org/firefox/blocked/p794
please update to Adobe Flash Player version 16.0.0.235 as soon as possible, which you can download from http://www.adobe.com/products/flashplayer/distribution3.html (use the windows-exe for plugin-based browsers).
in order to update java, go to java.com (or if you don't need the plugin you can also uninstall it though the windows control panel)

I have some old pagemaker files that I need to open so I have bought a G3 on ebay. It turns on OK but all that comes uo on the screen is an envelope with alternating question mark and apple logo. Any ideas?

I have some old pagemaker files that I need to open so I have bought a G3 on ebay. It turns on OK but all that comes uo on the screen is an envelope with alternating question mark and apple logo. Any ideas?

I suggest you get 9.2. You need to install the same or later version of the OS. One some computer the shipped version has extra drivers. The drivers will not be in the official release in this case 9.1. They would be in 9.2.
Mac OS 9.1 (Mac OS ROM 7.5.1) and Mac OS X 10.0.4 (4P13)
*blinking question mark*
The blinking question mark means that your mac firmware could not find a valid operating system
on one of your disk volumes.
Somethings to do to resolve the blinking question mark.
http://docs.info.apple.com/article.html?artnum=58042
Try holding down the option key then power on. This brings up the startup manager. Click on your hd. Click on right arrow key.
You need to figure out the level of your firmware before installing 10.2 or greater. ( The PC name for firmware is BIOS. ) Installing 10.2 with a down level firmware will most likely make your iMac unusable and difficult to fix.
What is firmware?
The firmware software receives control when you poweron your machine. It does some hardware testing and some hardware configuration then passes control to your version of Mac OS. It reside on a PROM ( program read only memory ) chip on the logic board.
Figuring out what level of firmware you have?
Open Firmware, boot into Open Firmware.
Power on your iMac while holding down command+option+o+f
The first output line contains the firmware level. Mine reads:
Apple PowerMac4,1 4.1.9f1 BootRom built on 09/14/01 at 13.18.04
Copyright 1994-2001 Apple Computer Inc.
On my machine, I have 4.1.9f1.
What firmware do you need?
http://docs.info.apple.com/article.html?artnum=86117
For a slot loading iMac, this article indicates that you need to be running 9.1 or later version of Mac OS Classic.
http://docs.info.apple.com/article.html?artnum=75130
"The iMac Firmware Update 4.1.9 will only run on iMac computers with lot-loading CD or DVD drives running Mac OS 9.1 or later from a local drive. If you are using Mac OS X you must boot from a local Mac OS 9.1 or later writeable partition (not a CD, or network disk) prior to following the update instructions."
You can download the Mac OS 9 updates from the Apple site.
http://support.apple.com/kb/HT1387?viewlocale=en_US

After trying to install the new update, I am getting a message from Windows saying that an MC file is missing, reintall Itunes-which I have now done 3 times. How do I fix this?

I received the new update from Itunes and after installing, I couldnt get into my Itunes. I get a message from Windows saying that an MC file is missing and to reinstall I tunes. I have reinstalled 3 times, the first time I didn't remove the old version, I installed the update over it. Next I tried the repair function under Control Panel. After that, I uninstalled Itunes and reinstalled again from the website. I still get the same message about missing files from Windows.

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Keep getting error message from 'Cron Daemon'

I have been running an Xserve G4 with Mac OS X Server 10.3.9 as a mail server and web server for several years now with no problems. Recently, however, I tried to set up a mailing list, which I had never done before. When I tried doing this, OS X automatically created a mailing list called "Mailman" for me, in addition to the mailing list I created.
Now I keep getting error messages sent by "Cron Daemon <[email protected]>" to that "Mailman" mailing list. The error messages are sent to the mailing list and I get them as a subscriber to the list. They read:
====
From: [email protected]
Subject: [Mailman] Cron <mailman@www> /usr/bin/python -S /usr/share/mailman/cron/senddigests
Date: 6 mai 2006 12:00:00 HAA
To: [email protected]
Modules/gcmodule.c:215: failed assertion `gc->gc.gc_refs == GC_REACHABLE'
Mailman mailing list
[email protected]
http://www.mydomain.com/mailman/listinfo/mailman
===
I did some research on the OS X Server support pages and discussion forums and couldn't find any references to such a problem.
With a worldwide search with Google, I only found very obscure stuff about Python, which I know nothing about.
The mailing lists appear to be working fine other than that (and the fact that Mailman uses "www.mydomain.com" instead of just "mydomain.com").
Any help would be greatly appreciated.
Pierre

Thanks for the clarification. I really do not need anything fancy at this point. Also, please note that I am still using Server 10.3.9, not 10.4.
Now, as for the initial problem, I am afraid it is not gone. It has just changed. Here's what I got in my mailbox this morning:
===
From: [email protected]
Subject: Un envoi sur la liste Mailman à partir de [email protected] requiert une approbation
Date: 8 mai 2006 09:25:02 HAA
To: [email protected]
En tant qu'administrateur de liste, votre autorisation est nécessaire
pour l'envoi du message suivant vers la liste:
Liste: [email protected]
De: [email protected]
Objet: Cron <mailman@www> /usr/bin/python -S /usr/share/mailman/cron/gate_news
Raison: Envoi par un non-abonné sur une liste reservée aux abonnés
Quand vous le souhaitez, rendez-vous à:
http://www.mydomain.com/mailman/admindb/mailman
pour approuver ou rejeter la demande.
From: [email protected] (Cron Daemon)
Date: 8 mai 2006 09:25:01 HAA
To: [email protected]
Subject: Cron <mailman@www> /usr/bin/python -S /usr/share/mailman/cron/gate_news
Modules/gcmodule.c:215: failed assertion `gc->gc.gc_refs == GC_REACHABLE'
From: [email protected]
===
In other words, the error message is still coming, but now it's being sent by "[email protected]" and since this is not a subscriber to the list, I get the admin notice requiring approval. (It's in French because I am using mailman's French-language option, but you should get the gist of it .)
I still do not know:
1) what causes this message and what it means
2) why it's coming from "[email protected]" rather than "[email protected]".
Like I said, I changed the "host_name" option from "www.mydomain.com" to "mydomain.com" in both mailing lists I have, but obviously there is still some part of Mailman that thinks it should be using "www.mydomain.com".
I am afraid I still don't know what to do about this.
FWIW, I ran the check_perms command you gave me this morning and it did find 10 problems and corrected them. I don't know yet if this will help with this particular problem.

How do I get received messages from others to show up on my different Apple devices, such as my iPhone

How do I get received messages from others to show up on my different Apple devices, such as my iPhone or iPad or iPod Touch, etc. I can see their reply on the device I was using at that moment but not on the other devices even iMessaging is turned on. Is there a way to refresh to incoming messages when one picks up one of their other Apple devices?

Hi there lkbluntzer,
You may find the information in the article below helpful.
Send and receive messages
http://help.apple.com/iphone/7/#/iph01ac18d71
See what time a message was sent or received. Drag any bubble to the left.
-Griff W.

I have already downloaded OS Yosemite (it says so on my Apple About this mac overview) but now I keep getting a message from "install Yosemite" that keeps asking me to install Yosemite again and won't go away.

What do I do? I have already downloaded OS Yosemite (it says so on my Apple>About this mac>overview) but now I keep getting a message from "install Yosemite" that keeps asking me to install Yosemite again and won't go away.

I have the same issue. My computer has also slowed down. I hope this isn't a malware. I haven't input my password into it, and dont know what I did to turn this on.
Hope someone else can give some insight

HT1212 my ipod is disabled, i have tried the steps to restore, but i get a message from itunes saying i have to enter my password to open itunes, meanwhile i cannot enter a passcode on the touch b/c it is enabled. i do not have the original computer i sy

My ipod was disabled by my son entering the wrong pass code. I no longer have the original computer i sync to. I have tried to restore using the instructions sent by Apple Rep, and on these help pages. I get a message from itunes saying that cannot connect to ipod touch b/c it is disabled, that i need to enter passcode to continue.. meanwhile, the ipod touch is saying i am disabled and to connect to itunes. Any NEW ideas?

If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)
If none of the above work, try:
DFU mode: http://osxdaily.com/2010/12/04/ipad-dfu-mode/
How to put iPod touch / iPhone into DFU mode - http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/

When I sync my Ipad and Mac I get a message from itunes to allow access with an email address I no longer use and asks for a password I don't know how do I remove the old email

Whwn I sync my ipad I get a message from itunes to sign into my account but the email used is not my email and I don't have a password for the email it used - how do I get rid of the email address for itunes on the ipad - itunes on the Mac work just fine - but not on the ipad

Hello Tonchee
If you are seeing an Apple ID that is not yours, then you have purchased content on your iPad that is tied to that Apple ID. You would need to know that password or remove the content that is associated with that Apple ID.
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I keep getting this message from Imovie: Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (Error in user parameter list)

I keep getting this message from Imovie:
Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (Error in user parameter list)

Bartirn,
I called Apple under my Mac support contract. They were completely unfamiliar with the error you and I were encountering. Updating to 10.8.5 didn't help.
I'm stopping my TimeCapsule while I perform these tasks, but I don't know yet if I have a consistent work-around.
B

HT4863 I sent an email from my iPhone 3GS (via iCloud account) with around 16GB of attachment. It slowed down the phone for a few seconds, then appeared to be sent. However, the message is now not in the sent box, and I can't see an outbox at all. Any ide

I sent an email from my iPhone 3GS (via iCloud account) with around 16GB of attachment. It slowed down the phone for a few seconds, then appeared to be sent. However, the message is now not in the sent box, and I can't see an outbox at all. Any ideas?

That changes things a little bit , login to icloud.com and see if you can find it in your sent folder.
If it is there you did send, just need to wait until you phone syncs "sent folder" perhaps on wifi.
If it is not, then I would say it is lost and you may have to send again. They have 20 megs limit, so make sure that message plus attachment is under that limit.

Can I use an AE as a Bridge allowing me to hardwire my iMac and offer a wifi to my MacBook? The Ethernet in my office is hard wired but does come in from a router on the other end of the building that has a wifi that cant reach my office...

Can I use an AE as a Bridge allowing me to hardwire my iMac and offer a wifi to my MacBook? The Ethernet in my office is hard wired but does come in from a router on the other end of the building that has a wifi that cant reach my office...

Thanks, I thought so but wanted to be sure before running out and buying one... I also called Apple Joint Venture and they helped me set it up without the Airport by using my iMac as the wifi! Thanks again!

And when i try to Re-install itunes i get a message from itunes ERROR 7 (windows error 1114), now how do i sort this out ???

and when i try to Re-install itunes i get a message from itunes ERROR 7 (windows error 1114), now how do i sort this out ???

Hey deepakmenonfrompune,
Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following resource may help to resolve your issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.

My pdf reezes when I click on COMMENT. I am trying to get at the tools to edit a pdf. If I use the tools from the toolbar, there is no issue, but once I click COMMENT, the document freezes and I have to open Task Manager to crash it. This started in the l

Sorry, I am new to the type of problem-solution process and I do not know how to edit my first statement. My true statement is below:
My pdf freezes when I click on COMMENT. I am trying to get at the tools to edit a pdf. If I use the tools from the toolbar, there is no issue, but once I click COMMENT, the document freezes and I have to open Task Manager to crash it. This started in the last seven days (3.31.15).

I answered your questions below, BUT while I was searching for properties, I found the REPAIR ACROBAT INSTALLATION feature, did the repair and (Voila!) the issue was resolved!
Thanks for making me search for information.
Karen
I am using Acrobat XI Pro, version 11.0.10.32.
I did not create the file I was working in during the freezes, so I tried a PDF that I created with Adobe and it also freezes when I click on COMMENT. I did discover that the COMMENTS plug-in is loaded. (see image
I have used COMMENT for years without this issue occurring. It started in the last 2 weeks.
I could not find Properties under the file menu, but found a security setting in Preferences under the Edit menu. It did not have a way to allow/disallow COMMENT.

Can't get group messages from iphone user

I use to be able to get group messages from an iPhone user when I was using my Razr Maxx but switched to an iPhone for a couple months, then back to the Razr Maxx and now I can't get group messages from my iPhone users. I'm using the same text message service I was using before trying an iPhone so I don't know why I now can't get group messages.

http://support.apple.com/kb/TS5185

Printing to a Imagesetter (Platemaker) from PageMaker 6.5 on Windows 7 OS I get a message from the platesetter there is no process on the other end of the Pipe Any Ideas

Similar Messages

Maybe you are looking for