Priority field mandatory for planning plant-order type

Hi
Is there a standard way through configuration that I may contol priority field in order header to be mandatory for some order types only in one planning plant?
Problem is that if I make the priority field mandatory for order type, it will be so for all the planning plants which i dont want. Also i dont want it to mandatory at planning plant level since there are many order types under one planning plant and requirement is to make priority field mandatory only for some order types under this plant.
TIA.

Hi Tehsin
Thanks for the reply.
In the transaction we can separately make it mandatory for either planning plant or order type.
My requirement is for combination of both.

Similar Messages

  • Added custom field to VA01 should be mandatory for a particular order type

    Hi experts,
    I have created a custom field in Additional Tab B (Screen 8459) in VA01 at the item level. Now that field should be mandatory for a particular order type. If a sales order is created with that order type then the user cannot save the sales order without putting any value to the custom field. Please can anyone suggest me how to do that?
    Regards,
    SURYA

    Hi
    Sap_wiz is right. It's the same that in this [post|Re: Enhancement in VA01 Additional data B tab].
    Regards
    Eduardo

  • Materia Master field mandatory for specfic plant for a specfic mat type

    HI,
    I want to make one MARA-XCHPF field mandatory for a specific plant and specfic material type,If I Give Plant specfic Field referance and check the fiield as mandatory in OMSR for the field  referance I have created If I mark it mandatory it become mandatory for all the material type,I want to make mandatory for some materials type only that too plant specfic
    How to acheive this? kindly guide me
    Kantha

    Dear Kantha,
    check this link may be useful to you.
    Mandatory field per material type
    Regards,
    PK.

  • WBS element field mandatory for specific sales order

    Hi Friends,
    I want to make the WBS element field in sale order line item to be mandatory for a specific sales order type. I am not able to add this field in incompletion log also. So can anyone let me know the solution for this.
    Ratna

    Hi,
    As solution suggest above is correct use VBAP table and Field is PS_PSP_PNR into ur incompletion log and assign this procedure to ur Item category. And If u want to WBS element check at header level the use VBAK table and field PS_PSP_PNR and assign this incompletion log to ur sales document type.
    Once more setting is required to stop the order from saving if incompletion check is unsucessful, for that you need to check a checkbox named "Incomplete. Message" in VOV8 tcode, for ur perticular sales document types.
    Hope this will resolve ur problem.
    rgds
    Dhiraj

  • Profit Center Mandatory in all the Order type

    Hi All,
    I want to make Profit center field as mandatory for all the order types[Standard and Z type].
    I have made settings in PM configuration settings:
    SPRO>Plant Maintenance and customer services>Maintenance and service processing>Maintenance and service orders>Define field selection for order Header Data[PM]>Field Selection for Order Header Data and Reference Object
    But here I am able to do mandatory for Pm orders.
    I want Mandatory for Orders like Process, PM Orders, Sales orders Prodcution orders [In single setting]
    Regards
    Honyal

    Hi
    U can do this with transaction variant SHD0. Record the transaction like CO01 and make the fielf mandatory.

  • For Z Po order type - Item category field is  greyed out.

    Hi MM Experts,
    I am an ABAper working on PO creation with respect to PR( PR with account assignment N)  for Z order type . The requirement includes to update item category of PO with B , But for this Z order type both PO transaction Create/Change(ME21/ME22) the field item category has been greyed out ( Non editable). I checked the SPRO setting for this order type ( SPRO-MM->Purchasing-PO->Define Screenlayout at document level .The field item category has been made as optional.
    Please let me know why this field ( item category still showing in display mode) and How to make it as editable .I need it as editable in ME22 to implement the new requirement of updating that field with item ategory B.
    Thanks in Advance
    Pravee.

    Hi All,
    Since I was creating a PO with respect to PR - after running through all the screens the item category field was becoming non editable, But during the create in one of screen the field item category was still editable, so I updated the item category with B during the create and created the PO, I have used BDC to do the same and its working fine. Thanks for all your inputs.
    Thanks
    Pravee.

  • Transaction for characteristics per plant / order type

    Transaction for characteristics per plant / order type
    We need a new transaction for customizing feature
    Characteristics per plant and order type
    ZVP_PRNTCHARCON
    example one screen - one dimension characteristics, other 15 operations
    Thanks

    Hi Tarun,
    Standard SAP does not support char specific to plant & order type. You need to devlop some custom transaction. If you are looking more details, request you to share the business requiremnet, details etc.
    Thanks...Sanjay

  • Field selection for combination of Mat.type and Plant

    Hi Friends,
    How to  make Valuation category (in material master) mandatory for paricular material types for specified plants
    Ex: I want to make val. category mandatory for mat. types ROH and HALB , only for Plants P1 and P2 and not for plant P3.
    Regards
    Venkat S

    HI,
    I think, valuation category is at client level...Not sure, please verify the table if it is MARA or MARC...If so, you can'tmake it mandatory for a set of plants only....Its either mandatory for all plants or just optional...
    Regards

  • Making storage location mandatory for one plant.

    Hi All ,
           I want to make storage location field mandatory in ME21N for only one plant .Like in our organisation structure two comp codes 1000 and 3000 are there .Under each comp code one plant like under 1000 1000plant is there and under 3000 3000 plant is there  .I want to make storage location field mandatory for only 3000 plant during creation of PO.Is it possible ?
           Plz reply .

    Hi Abhijit,
    Suggestions:
            1) As per your last comment, new document type is used for doing PO for that particular plant. Check the Field Selection Group in the respective document type. (SPRO -> Materials Management -> Purchasing --> PO --> Define Document Type)
            2) Then SPRO -> Materials Management -> Purchasing --> PO --> Define Screen Layout at document level, Select the Field selection group. Then goto to Supplying plant and make the Issuing storage location as a "Mandatory field".
    Note: But you can use this document type for this particular plant only. For the other plants, use the general document type.
              Please revert if you need any clarification.

  • Table & Field Name for Plan Data in CO

    Hi All,
    Can anyone tell me the table & field name where we can get the planned data in Cost Center Accounting and Profit Center Accounting.
    I checked out the COSP(which is Totals) and COEP tables for CCA but i could find the fields only for actual data and not planned data.
    Same for PCA...i checked out the GLPCT & GLPCA tables but in vain.
    Regards & Thanks
    Piyush Kothari.

    Hi,
    Thanks for the reply but COKL is only for Activity Type which contains Allocation Cost Elements.
    I would like to have the Table & Field name for Plan data of Primary Cost Element.
    Piyush

  • Add fields to transaction VOV8  - Sales Order types maintaines

    Hi,
    I want to know if it is possible to add new fields to view V_TVAK (threw table TVAK), and then add them also to the view in transaction VOV8  for a sales order type.
    Thanks naama.

    Hi Nilmini,
    In My case, I have added custom fields to MDC change screen by using /AFS/MDC_CHANGE_CUSTOM_FIELDS but its not appearing in Grid list display. Would like to appreciate if you can Help me to achieve this.
    Regards,
    Jelli

  • How to exclude sales office for combination sales order type/division?

    Hi experts,
    I would appreciate if you could advise: How to exclude sales office for combination sales order type/division in ECC 6.0 ?

    Hi
    Standard SAP functionality would not be able to cater to this. Ideally create a Z table with sales order type and sales office combination. Put in entries for combinations that are allowed. In Sales order program MV45AFZZ use the exit USEREXIT_MOVE_FIELD_TO_VBAK. In this exit write down the logic passing the sales office determined and the order type and check if the entry is there or not. If the entry is there then it should go on to the next step. If it does not then pass an error message. You need to use the help of your ABAP er for this.
    Thanks
    Indranil

  • Descriptive flexfield for different purchase order types

    Hi,
    Can i have a descriptive flexfield for different purchase order types?
    Scenario : I have two purchase order types
    1. Blanket : done from req--> auto create --> standard PO
    2. Standard --> Direct PO
    Regards
    846691

    You can use darpan77's suggestion for context sensitive DFF. See http://oracle.anilpassi.com/context-sensitive-descriptive-flexfields.html for an example.
    However, both options you mentioned talk about standard po. Is the difference in how they are generated? (One is manual and the other is autocreated?)

  • No Authorization for Planning plant in MIGO

    Hi Gurus,
    I have an issue for the Goods Receipt for multiple line items of account assigned( F) PO.
    When user try to receive goods thru MIGO, system throws an error (dump) saying "NO AUTHORIZATION FOR PLANNING PLANT XXX" even though roles are assigned to the user.
    I went thru the OSS note 385830 but it hardly helped me.
    Pls throw some light on the issue...
    Regards
    Shashidhar

    Hi,
    Check for the Authorization Object that system is referring for the error in SU53 transaction. You may process the transaction and once the error comes, go to transaction SU53 check for the Authorization object there.
    You can check the roles available for a given authorization object in SUIM transaction.

  • Automatic Batch Determination is not happening for New Sales Order Type

    Dear Experts,
      I have created a new sales order type ZBPY - For Free Sales, but automatic batch detrmination and batch pick up is not happening for new sales order type,  but it is activated for all the other sales order types in Production Server, can any body let me know the steps how to map this new order type to batch management and let it behave like other order types.
    Thanks in Advance.
    Saravanan(EKS).

    Hi Saravanan,
    Kindly check the following steps for automatic batch determination.
    1. First check the material is maintained with batch in the warehouse management.
    2. Maintain new entry for search procedure for batch determination with the new created doc type.
    3. Maintain new entry for automatic batch determination for sales order or automatic batch determination for delivery ( This depends on the business process of our client, whether they want to determine the batch with sales order or at the delivery level. check this and make new entry)
    4. Create Batch using T.code MSC1N with proper date of manuf. and SLED.
    5. Create Batch Search Strategy using T.code VCH1 with proper strategy type.
    6. Maintain stock with active batch. check this with t.code LS26 or LS24.
    regards
    Ravishankar M

Maybe you are looking for