Problem about c++ compiler in intel computer
we used forte c++ compiler (version 6) under solaris on intel computer
but I can't find the misalign or align debug option flags about the CC
and when the program exit,there are errors reported:no map at the fault address
stoped at the delete statement releasing the memory
but not all delete statement report error
the same code works well on sparc station
I want to know if it is the problem of byte align
and how can I set the CC complier to align or misalign(can't find it in the CC -help)
The default location for the Sun C++ compiler is
/opt/SUNWspro/bin/CC
You can download it from
http://www.sun.com/forte/cplusplus/buy.html
The GNU C++ is free - download it from
http://sunfreeware.com/
(Or in your Solaris 8 companion CD)
No, there is no standard C++ compiler in the core Solaris packages.
Similar Messages
-
Continuing problems about JSP compilation...
I have two problems that I can't solve about JSP:
- my JSPs aren't recompiled when I modify them
I've got to redeploy the entire webApp for the
modification to be updated.
- the precompilation of my JSPs fails
I've got the common NullPointerException in JSP2Java.makeReader
I'm working in the deployed directory way, with a WL6.0sp2...
My xml files seem to be correct and the clocks of the different machines are synchronized.
I read several threads and solutions concerning those problems but all of these
were applied and it still doesn't work...
If someone could help me... TIA...
JimmyL wrote:
> I have two problems that I can't solve about JSP:
>
> - my JSPs aren't recompiled when I modify them
> I've got to redeploy the entire webApp for the
> modification to be updated.
On admin server or managed server????
>
>
> - the precompilation of my JSPs fails
> I've got the common NullPointerException in JSP2Java.makeReader
>
Answered in the other email..
Kumar
>
> I'm working in the deployed directory way, with a WL6.0sp2...
> My xml files seem to be correct and the clocks of the different machines are synchronized.
>
> I read several threads and solutions concerning those problems but all of these
> were applied and it still doesn't work...
>
> If someone could help me... TIA...
-
While trying to restore os x and erase content on my MacBook pro, some problem about voice software came up and the computer asked me to restart and try again by clicking restart button. When I did this, the machine went to a gray start up screen with an apple and will not progress. I've waited more than 30 minutes and tried restarting again by holding the power button. Also, restore cd 1 will not eject so the computer will no longer move past the gray screen with spinning circle. Restore CDs had never beeused and were still in packaging in the original box. Ran hardware test just to check, and it came back as normal. Now what? I live nowhere near a genius bar :(
computer asked me to restart and try again by clicking restart button.
That's called a kernel panic...
Since the install disc won't eject, try starting up while holding down the C key. If the Mac won't boot while holding down the C key, try ejecting disc by either holding down the mouse while starting up or holding down the Eject key while starting up.
Try booting from your install disc so you can run Disk Utility in case the startup disk needs repairing.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
(In Mac OS X 10.4 or later, you must select your language first from the installer menu)
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your startup disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. Make sure there is always 15% free space.
What is a kernel panic
Mac OS X Kernel Panic FAQ
Resolving Kernel Panics -
A problem about EAXX We have some problem in our development when using "Creative OpenAL SDK . (ver 3.03)". We create "OpenAL device" using "Generic Software"
and play audio with EAX2.0. But the EAX effect works on one computer while it doesn't work on another one. Followings are the two computers' configuration:
The computer which works well with EAX:
Operation system: Windows XP SP3
Motherboard chipset: Intel i945G
Sound card: Creative Sound Blaster Audigy Digital Deluxe
OpenAL.dll version: 6.4.0357.22
Wrap_oal.dll version: 2..8.
The computer which doesn't work with EAX:
Operation system: Windows XP SP3
Motherboard chipset: Intel i945GC
Sound card: Creative Sound Blaster Audigy Digital Deluxe
OpenAL.dll version: 6.4.0357.22
Wrap_oal.dll version: 2..8.Hello gozhu_g,
I suggest getting in touch with the developers on your inquiry. Here's their site. -
Problem with moving itunes to new computer
I recently bought a new computer and when i downloaded Itunes some of my songs did not come through complete. About 50 songs in my library will randomly stop playing in the middle of the song and move on to the next song. I downloaded the latest version of itunes. When I go to my library and play a defective song if i force it to fast forward it will play the remaining part of the song so the music is there. So far the only solution to my problems is an expensive one. only thing I can think of to do is delete the affected songs and pay to redownload them. Is there another way to resolve this issue? When I first noticed the problem itunes did let me redownload 3 songs for free then when I went to do it again ( because I have alot a music and haven't discovered ALL the defective songs yet. I cant find them till they play and I notice it) but when I went to redownload song I already paid for they wanted to charge me again.
Thanks for your advice.
Unfortunately it did not solve the problem.
I’m now convinced that my problem is related to the Intel Viiv Technology.
In an article at tweakdown.com, http://www.tweaktown.com/articles/937/index.html , they proclaim that if you have a computer with Intel Viiv Technology "you’re locked out of iTunes". -
I have an Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it. The card is recognized but will not see the in-house network. This is a pre-intel computer. Do I need an additional antennae? If so, which one because my research is confusing me about what is supposed to work with this computer.
Please check out the following Apple Support article to see if your particular Power Mac model supports an external Wi-Fi antenna.
-
Problem about updating to Mac OS X 10.5.3
Hi there,
I just bought my Macbook two months ago. I encounted a problem about updating it to the latest version of MAC OS X. The system reminded me to restart, I proceed. Everythig looked just fine until a poping up window shown "Mac OS X 10.5.3 pacakage can not be validated". Dose anyone know what did that mean? How can I update my little mac?Hi Hummer,
First, welcome to Apple discussions.
To answer your question, your computer checks all downloaded updates before installing them. It does this to make sure it's got the entire file and that the update will install correctly. The fact that validation fails on your machine probably means the file did not download correctly.
To install 10.5.3, simply go to this website, download the "10.5.3 combo update" and then run it on your Mac: http://www.apple.com/support/downloads/ -
Hardware diagnostic shows me a problem about charging battery. What about it ?
Hi.
I bought a MacBook Pro retina 13', mid 14. on last december, and after almost a month I did the hardware test of apple as the Technic support says, and this hardware test shows me a problem about charging battery, so, I wanna know what about it, is it normal ? or is it a battery problem or is it a problem about the Current adaptador ? Thank your for your answers.Could be battery, could be adaptor, could be the computer itself. You will have to take it in for testing. Fortunately, you are still under warranty.
-
I got this message:" Software Update Update failed Something is trying to trick Firefox into accepting an insecure update. Please contact your network provider and seek help." What on earth is this about? I am not computer savy.
taken from https://support.mozilla.com/en-US/questions/826858:
''This issue can be caused by the presence of leftover files in the Firefox program folder (defaults\pref) like a file all.js or firefox.js''
''Download a fresh Firefox copy and save the file to the desktop.
Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html ''
''Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.''
''Do not remove personal data if you uninstall the current version.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.''
''Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.''
''If the problem persists See also:
https://support.mozilla.com/en-US/questions/815130?page=2#answer-185385''
Check and tell if its working. -
Hello i have a problem when i start woorksheet, my computer crash with blue screen sometimes.
hello i have a problem when i start woorksheet, my computer crash with blue screen.
OS: Win 2000 pack 2 and dasylab 7.00.05 ;ddi7.02 ;nidaq 7.0
I hve this problem sometimes and need to reebot my computer.This worksheet is used to generate 4 signals to output and have an acquisition tooin this 4 channels.
The error is in the blue screen:0x00000076 (0x00000000 , 0x81358300, 0x000001c2, 0x00000000).
Thanks for your help.The DASYLab development team has read your message, and advises that there is insufficient information to be able to even start diagnosing the problem. We suggest that you send a note directly to [email protected], with your full contact information, DASYLab serial number, and the following technical information:
-The Help-->Report information - this will tell us more about the computer, video and installed memory
-Installed hardware - what DAQ devices are you using (exact models!)
-The worksheet that crashes - we need to see how the timing is configured in the worksheet
-What other programs are running at the same time?
-Does the worksheet crash every time?
-Does the NI-DAQ Test Panel work correctly for both inputs and outputs?
Sorry that we cannot be more help in this forum; we do not have much experience with blue screen under Windows 2000. This is very hard to do, and is almost always related to a hardware problem - either a resource conflict, or problems with one of the installed hardware devices (DAQ, Video, Memory...).
Regards,
-cj
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab. -
Kernel26-icc compiled with Intel's compiler instead of gcc
I'm working on kernel26-icc, it's the kernel26 but compiled with Intel's compiler. Can't seem to upload it to AUR ("Invalid name: only lowercase letters are allowed.")
http://www.linuxdna.com/
So far I've this:
PKGBUILD
# Maintainer: Mathias Burén <[email protected]>
pkgname=('kernel26-icc' 'kernel26-icc-firmware' 'kernel26-icc-headers') # Build icc kernel
_kernelname=${pkgname#kernel26-icc}
_basekernel=2.6.33
pkgver=${_basekernel}
pkgrel=1
arch=(x86_64)
license=('GPL2')
url="http://www.linuxdna.com/"
source=(ftp://ftp.kernel.org/pub/linux/kernel/v2.6/linux-$_basekernel.tar.bz2
# the main kernel config files
config.x86_64
# standard config files for mkinitcpio ramdisk
kernel26-icc.preset
http://www.linuxdna.com/dna-2.6.33-intel64.patch)
makedepends=('icc')
md5sums=('c3883760b18d50e8d78819c54d579b00'
'5c91374d56f115ba4324978d5b002711'
'a4fd3c59751194bc118c70d1348436ab'
'a307beb562eb7e68a6f3e2fb5fc216a3')
build() {
cd ${srcdir}/linux-$_basekernel
cat ../config.x86_64 >./.config
patch -p1 < ../dna-2.6.33-intel64.patch || return 1
if [ "${_kernelname}" != "" ]; then
sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_kernelname}\"|g" ./.config
fi
# get kernel version
make prepare
# load configuration
# Configure the kernel. Replace the line below with one of your choice.
make menuconfig # CLI menu for configuration
#make xconfig # X-based configuration
#make oldconfig # using old config from previous kernel version
# ... or manually edit .config
# stop here
# this is useful to configure the kernel
#msg "Stopping build"
#return 1
yes "" | make config
# build!
make bzImage modules || return 1
package_kernel26-icc() {
pkgdesc="The Linux Kernel and modules built with ICC"
backup=(etc/mkinitcpio.d/${pkgname}.preset)
depends=('coreutils' 'kernel26-icc-firmware>=2.6.33' 'module-init-tools' 'mkinitcpio>=0.5.20')
install=kernel26-icc.install
optdepends=('crda: to set the correct wireless channels of your country')
KARCH=x86
cd ${srcdir}/linux-$_basekernel
# get kernel version
_kernver="$(make kernelrelease)"
mkdir -p ${pkgdir}/{lib/modules,boot}
make INSTALL_MOD_PATH=${pkgdir} modules_install || return 1
cp System.map ${pkgdir}/boot/System.map26${_kernelname}
cp arch/$KARCH/boot/bzImage ${pkgdir}/boot/vmlinuz26${_kernelname}
# # add vmlinux
install -m644 -D vmlinux ${pkgdir}/usr/src/linux-${_kernver}/vmlinux
# install fallback mkinitcpio.conf file and preset file for kernel
install -m644 -D ${srcdir}/kernel26.preset ${pkgdir}/etc/mkinitcpio.d/${pkgname}.preset || return 1
# set correct depmod command for install
sed \
-e "s/KERNEL_NAME=.*/KERNEL_NAME=${_kernelname}/g" \
-e "s/KERNEL_VERSION=.*/KERNEL_VERSION=${_kernver}/g" \
-i $startdir/kernel26.install
sed \
-e "s|source .*|source /etc/mkinitcpio.d/kernel26${_kernelname}.kver|g" \
-e "s|default_image=.*|default_image=\"/boot/${pkgname}.img\"|g" \
-e "s|fallback_image=.*|fallback_image=\"/boot/${pkgname}-fallback.img\"|g" \
-i ${pkgdir}/etc/mkinitcpio.d/${pkgname}.preset
echo -e "# DO NOT EDIT THIS FILE\nALL_kver='${_kernver}'" > ${pkgdir}/etc/mkinitcpio.d/${pkgname}.kver
# remove build and source links
rm -f ${pkgdir}/lib/modules/${_kernver}/{source,build}
# remove the firmware
rm -rf ${pkgdir}/lib/firmware
package_kernel26-icc-headers() {
pkgdesc="Header files and scripts for building modules for kernel26-icc"
mkdir -p ${pkgdir}/lib/modules/${_kernver}
cd ${pkgdir}/lib/modules/${_kernver}
ln -sf ../../../usr/src/linux-${_kernver} build
cd ${srcdir}/linux-$_basekernel
install -D -m644 Makefile \
${pkgdir}/usr/src/linux-${_kernver}/Makefile
install -D -m644 kernel/Makefile \
${pkgdir}/usr/src/linux-${_kernver}/kernel/Makefile
install -D -m644 .config \
${pkgdir}/usr/src/linux-${_kernver}/.config
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/include
for i in acpi asm-{generic,x86} config linux math-emu media net pcmcia scsi sound trace video; do
cp -a include/$i ${pkgdir}/usr/src/linux-${_kernver}/include/
done
# copy arch includes for external modules
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/arch/x86
cp -a arch/x86/include ${pkgdir}/usr/src/linux-${_kernver}/arch/x86/
# copy files necessary for later builds, like nvidia and vmware
cp Module.symvers ${pkgdir}/usr/src/linux-${_kernver}
cp -a scripts ${pkgdir}/usr/src/linux-${_kernver}
# fix permissions on scripts dir
chmod og-w -R ${pkgdir}/usr/src/linux-${_kernver}/scripts
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/.tmp_versions
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/arch/$KARCH/kernel
cp arch/$KARCH/Makefile ${pkgdir}/usr/src/linux-${_kernver}/arch/$KARCH/
if [ "$CARCH" = "i686" ]; then
cp arch/$KARCH/Makefile_32.cpu ${pkgdir}/usr/src/linux-${_kernver}/arch/$KARCH/
fi
cp arch/$KARCH/kernel/asm-offsets.s ${pkgdir}/usr/src/linux-${_kernver}/arch/$KARCH/kernel/
# add headers for lirc package
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/video
cp drivers/media/video/*.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/video/
for i in bt8xx cpia2 cx25840 cx88 em28xx et61x251 pwc saa7134 sn9c102 usbvideo zc0301; do
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/video/$i
cp -a drivers/media/video/$i/*.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/video/$i
done
# add docbook makefile
install -D -m644 Documentation/DocBook/Makefile \
${pkgdir}/usr/src/linux-${_kernver}/Documentation/DocBook/Makefile
# add dm headers
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/drivers/md
cp drivers/md/*.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/md
# add inotify.h
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/include/linux
cp include/linux/inotify.h ${pkgdir}/usr/src/linux-${_kernver}/include/linux/
# add wireless headers
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/net/mac80211/
cp net/mac80211/*.h ${pkgdir}/usr/src/linux-${_kernver}/net/mac80211/
# add dvb headers for external modules
# in reference to:
# http://bugs.archlinux.org/task/9912
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/dvb-core
cp drivers/media/dvb/dvb-core/*.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/dvb-core/
# add dvb headers for external modules
# in reference to:
# http://bugs.archlinux.org/task/11194
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/include/config/dvb/
cp include/config/dvb/*.h ${pkgdir}/usr/src/linux-${_kernver}/include/config/dvb/
# add dvb headers for http://mcentral.de/hg/~mrec/em28xx-new
# in reference to:
# http://bugs.archlinux.org/task/13146
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/frontends/
cp drivers/media/dvb/frontends/lgdt330x.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/frontends/
cp drivers/media/video/msp3400-driver.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/frontends/
# add xfs and shmem for aufs building
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/fs/xfs
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/mm
cp fs/xfs/xfs_sb.h ${pkgdir}/usr/src/linux-${_kernver}/fs/xfs/xfs_sb.h
# add headers vor virtualbox
# in reference to:
# http://bugs.archlinux.org/task/14568
cp -a include/drm $pkgdir/usr/src/linux-${_kernver}/include/
# add headers for broadcom wl
# in reference to:
# http://bugs.archlinux.org/task/14568
cp -a include/trace $pkgdir/usr/src/linux-${_kernver}/include/
# copy in Kconfig files
for i in `find . -name "Kconfig*"`; do
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/`echo $i | sed 's|/Kconfig.*||'`
cp $i ${pkgdir}/usr/src/linux-${_kernver}/$i
done
cd ${pkgdir}/usr/src/linux-${_kernver}/include && ln -s asm-$KARCH asm
# add header for aufs2-util
cp -a ${srcdir}/linux-$_basekernel/include/asm-generic/bitsperlong.h ${pkgdir}/usr/src/linux-${_kernver}/include/asm/
chown -R root.root ${pkgdir}/usr/src/linux-${_kernver}
find ${pkgdir}/usr/src/linux-${_kernver} -type d -exec chmod 755 {} \;
# remove unneeded architectures
rm -rf ${pkgdir}/usr/src/linux-${_kernver}/arch/{alpha,arm,arm26,avr32,blackfin,cris,frv,h8300,ia64,m32r,m68k,m68knommu,mips,microblaze,mn10300,parisc,powerpc,ppc,s390,sh,sh64,sparc,sparc64,um,v850,xtensa}
package_kernel26-icc-firmware() {
pkgdesc="The included firmware files of kernel26-icc"
cd ${srcdir}/linux-$_basekernel
make firmware || return 1
make INSTALL_MOD_PATH=${pkgdir} firmware_install || return 1
kernel26-icc.preset
# mkinitcpio preset file for kernel26-icc
# DO NOT EDIT THIS LINE:
source /etc/mkinitcpio.d/kernel26-icc.kver
ALL_config="/etc/mkinitcpio.conf"
PRESETS=('default' 'fallback')
#default_config="/etc/mkinitcpio.conf"
default_image="/boot/kernel26-icc.img"
#default_options=""
#fallback_config="/etc/mkinitcpio.conf"
fallback_image="/boot/kernel26-icc-fallback.img"
fallback_options="-S autodetect"
kernel26-icc.install
# arg 1: the new package version
# arg 2: the old package version
KERNEL_NAME=-icc
KERNEL_VERSION=2.6.33-icc
post_install () {
# updating module dependencies
echo ">>> Updating module dependencies. Please wait ..."
depmod $KERNEL_VERSION
# generate init ramdisks
echo ">>> MKINITCPIO SETUP"
echo ">>> ----------------"
echo ">>> If you use LVM2, Encrypted root or software RAID,"
echo ">>> Ensure you enable support in /etc/mkinitcpio.conf ."
echo ">>> More information about mkinitcpio setup can be found here:"
echo ">>> http://wiki.archlinux.org/index.php/Mkinitcpio"
echo ""
echo ">>> Generating initial ramdisk, using mkinitcpio. Please wait..."
/sbin/mkinitcpio -p kernel26${KERNEL_NAME}
post_upgrade() {
pacman -Q grub &>/dev/null
hasgrub=$?
pacman -Q grub2 &>/dev/null
hasgrub2=$?
pacman -Q lilo &>/dev/null
haslilo=$?
# reminder notices
if [ $haslilo -eq 0 ]; then
echo ">>>"
if [ $hasgrub -eq 0 -o $hasgrub2 -eq 0 ]; then
echo ">>> If you use the LILO bootloader, you should run 'lilo' before rebooting."
else
echo ">>> You appear to be using the LILO bootloader. You should run"
echo ">>> 'lilo' before rebooting."
fi
echo ">>>"
fi
if grep "^[^#]*/boot" /etc/fstab 2>&1 >/dev/null; then
if ! grep "/boot" /etc/mtab 2>&1 >/dev/null; then
echo "WARNING: /boot appears to be a seperate partition but is not mounted"
echo " This is most likely not what you want. Please mount your /boot"
echo " partition and reinstall the kernel unless you are sure this is OK"
fi
fi
if [ "`vercmp $2 2.6.13`" -lt 0 ]; then
# important upgrade notice
echo ">>>"
echo ">>> IMPORTANT KERNEL UPGRADE NOTICE"
echo ">>> -------------------------------"
echo ">>> As of kernel 2.6.13, DevFS is NO LONGER AVAILABLE!"
echo ">>> If you still use DevFS, please make the transition to uDev before"
echo ">>> rebooting. If you really need to stay with DevFS for some reason,"
echo ">>> then you can manually downgrade to an older version:"
echo ">>>"
echo ">>> # pacman -U http://archlinux.org/~judd/kernel/kernel26-scsi-2.6.12.2-1.pkg.tar.gz"
echo ">>>"
echo ">>> If you choose to downgrade, don't forget to add kernel26-scsi to your"
echo ">>> IgnorePkg list in /etc/pacman.conf"
echo ">>>"
echo ">>> (NOTE: The following portion applies to uDev users as well!)"
echo ">>>"
echo ">>> If you use any DevFS paths in your GRUB menu.lst, then you will not"
echo ">>> be able to boot! Change your root= parameter to use the classic"
echo ">>> naming scheme."
echo ">>>"
echo ">>> EXAMPLES:"
echo ">>> - change root=/dev/discs/disc0/part3 to root=/dev/sda3"
echo ">>> - change root=/dev/md/0 to root=/dev/md0"
echo ">>>"
fi
# generate new init ramdisk
if [ "`vercmp $2 2.6.18`" -lt 0 ]; then
echo ">>> --------------------------------------------------------------"
echo ">>> | WARNING: |"
echo ">>> |mkinitrd is not supported anymore in kernel >=2.6.18 series!|"
echo ">>> | Please change to Mkinitcpio setup. |"
echo ">>> --------------------------------------------------------------"
echo ">>>"
fi
# updating module dependencies
echo ">>> Updating module dependencies. Please wait ..."
depmod $KERNEL_VERSION
echo ">>> MKINITCPIO SETUP"
echo ">>> ----------------"
if [ "`vercmp $2 2.6.18`" -lt 0 ]; then
echo ">>> Please change your bootloader config files:"
echo ">>> Grub: /boot/grub/menu.lst | Lilo: /etc/lilo.conf"
echo "------------------------------------------------"
echo "| - initrd26.img to kernel26${KERNEL_NAME}.img |"
echo "| - initrd26-full.img to kernel26${KERNEL_NAME}-fallback.img |"
echo "------------------------------------------------"
fi
if [ "`vercmp $2 2.6.19`" -lt 0 ]; then
echo ""
echo ">>> New PATA/IDE subsystem - EXPERIMENTAL"
echo ">>> ----------"
echo ">>> To use the new pata drivers, change the 'ide' hook "
echo ">>> to 'pata' in /etc/mkinicpio.conf HOOKS="
echo ">>> The new system changes: /dev/hd? to /dev/sd?"
echo ">>> Don't forget to modify GRUB, LILO and fstab to the"
echo ">>> new naming system. "
echo ">>> eg: hda3 --> sda3, hdc8 --> sdc8"
echo ""
echo ">>> piix/ata_piix (Intel chipsets) - IMPORTANT"
echo "----------"
echo ">>> If you have enabled ide/pata/sata HOOKs in /etc/mkinitcpio.conf"
echo ">>> the 'ata_piix' module will be used."
echo ">>> This may cause your devices to shift names, eg:"
echo ">>> - IDE: devices from hd? to sd?"
echo ">>> - SATA: sda might shift to sdc if you have 2 other disks on a PIIX IDE port."
echo ">>> To check if this will affect you, check 'mkinitcpio -M' for piix/ata_piix"
echo ""
fi
echo ">>> If you use LVM2, Encrypted root or software RAID,"
echo ">>> Ensure you enable support in /etc/mkinitcpio.conf ."
echo ">>> More information about mkinitcpio setup can be found here:"
echo ">>> http://wiki.archlinux.org/index.php/Mkinitcpio"
echo ""
echo ">>> Generating initial ramdisk, using mkinitcpio. Please wait..."
if [ "`vercmp $2 2.6.19`" -lt 0 ]; then
/sbin/mkinitcpio -p kernel26${KERNEL_NAME} -m "ATTENTION:\nIf you get a kernel panic below
and are using an Intel chipset, append 'earlymodules=piix' to the
kernel commandline"
else
/sbin/mkinitcpio -p kernel26${KERNEL_NAME}
fi
if [ "`vercmp $2 2.6.21`" -lt 0 ]; then
echo ""
echo "Important ACPI Information:"
echo ">>> Since 2.6.20.7 all possible ACPI parts are modularized."
echo ">>> The modules are located at:"
echo ">>> /lib/modules/$(uname -r)/kernel/drivers/acpi"
echo ">>> For more information about ACPI modules check this wiki page:"
echo ">>> 'http://wiki.archlinux.org/index.php/ACPI_modules'"
fi
post_remove() {
rm -f /boot/kernel26${KERNEL_NAME}.img
rm -f /boot/kernel26${KERNEL_NAME}-fallback.img
Then there's of course the config, it's based on kernel26 at the moment,.
I'm building it now, to test. I had to install icc manually because the AUR package for icc didn't work for me. I had to install icc manually (run the installer), but that wasn't enough. Before makepkg, you have to add the icc to $PATH e.g.
PATH=$PATH:/opt/intel/Compiler/11.1/064/bin/intel64
and execute iccvars_intel64.sh which is in that folder.
Last edited by Fackamato (2010-02-25 23:43:38)Ashren wrote:So there is a significant performance gain with ICC? Compilation time wise or?
icc kernel compiles in similar time as gcc kernel, or if there any differences these may be negligible. To be honest I was not really interested in compiling times (was doing somethig else as it takes ~12 min on my system to finish kernel compilation), but rather with overall kernel performance. This is not the same as OS performance, but I am planning to compile firefox with icc and maybe some other stuff (if I am bored enough).
If you have 32-bit OS (I have no idea how it will work on 64-bit), try it. I can't post PKGBUILD for 32-bit icc kernel because I don't use PKGBUILD for kernels or nvidia as I have found it limiting/cumbersome/unnecessary (while PKGBUILDs work great for anything else on Arch).
The only part really annoying is intel server speed. Downloading icc sources (710MB for 32-bit only) tahes two hours. If you try to get 32/64bit sources even longer (1GB download).
32-bit icc PKGBUILD package requires only one modification related to Release Notes otherwise makepkg will fail. Once installed export icc path, edit kernel Makefile and change one line related to compiler: change gcc to icc. You can also add some compiling optimizations.
Pretty easy if you did compile kernel before.
note added:
actually combination of icc and zen seems to have nice effect on desktop responsiveness (this is 2.6.33)
Last edited by broch (2010-02-26 19:54:57) -
I installed Solaris8 x86 on my PC successfully, including software companion CD, which was installed under /opt.
Following was added in .profile :
PATH=/opt/sfw/bin:$PATH
Then I created two programs in a subdirectory:
C code, HelloWorld.c, compiled using gcc, run ./a.out, everything OK;
C++ code, HelloWorld.cc, compiled using g++, ./a.out was generated, it seemed ok. But when I tried to run ./a.out, got following error message:
$ ./a.out
ld.so.1: ./a.out: fatal: libstdc++.so.2.10.0: open failed: No such file or directory
Killed
The same C++ HelloWorld compiled and run good on another Sparc/Solaris7.
Anybody can tell me what the problem is and how to solve it?Edward_King wrote:
I enter a problem about gcc,I installed solaris 10,and then login with root user,I want to use gcc,
#pwd
#gcc
but I find there is no gcc,A better way to find gcc is to:
grep gcc /var/adm/install/contents
On a Solaris system if you install the developer or greater cluster then gcc should be installed into:
/usr/sfw/bin
so you can start by just checking there.
PATH=$PATH:/opt/gnome/bin:/usr/local/bin:/opt/netscape:/usr/ccs/bin
export PATH I'm not sure why you would need /opt/gnome or /opt/netscape but whatever.
1 how can i know root user use sh or csh user?Look at the /etc/passwd file.
2 I can't find .profile or .cshrc file in / directory,where are they? Which directory should I create profile or .cshrc file? After I create profile or .cshrc file,which command I can run to make profile or .cshrc file go function? Need I reboot the solaris system?By default root doesn't have one so just create using vi.
vi /.profile
Thanks in advance!regards,
alan -
Problem about Mac Os X 10.6.3 V.S Labview 2009
hi,labview~
i have some problem about Labview 2009.i saw the website of NI wrote the Labview 2009 is not support for Mac OSX 10.6.3,but i have already installed it (English system) in my computer successfully.
anyway,i cant open the programs which are wrote by labview 8.5(Japanese system) .My labmate who use Labview 2009(Mac OSX 10.5) can open those programs.
can anyone tell me the possible reason i cant open the programs?
Thanks a lot!
PS i have already tried Labview 8.5 and 8.6(English system),but the problem cant be solved....Hi mofi, my name is Taiki from National Instruments Japan.
I assume that the link you referred to is the one below, but as you stated, LabVIEW 2009 is not supported in Mac OS X 10.6 so even though you were able to install it successfully, NI cannot assure that it will fully function on your Mac.
LabVIEW Support for Mac OS 10.6 (Snow Leopard) and 10.5 (Leopard)
http://digital.ni.com/public.nsf/allkb/70F17A30DE7B865E8625737F006377F8?OpenDocument
Since you mentioned that the VI files were able to be opened on LabVIEW 2009, Mac OS X 10.5, the actual VI files should not be the issue which leaves us with the possibility of the software environment.
You also noted that the issue could not be solved on LabVIEW 8.5 and 8.6 but was this on Mac OS X 10.6 as well?
If so, there is a good chance that this issue is due to the fact that LabVIEW is running on an supported OS and I would suggest trying opening the files on another different Mac OS X 10.5 system.
Unfortunately, currently Mac OS X 10.6 is an unsupported OS for any version of LabVIEW so I can only suggest trying on a Mac OS X 10.5.
Kind regards.
Taiki Hoshi
Applications Engineer
National Instruments Japan -
Problem with creating site from another computer!
Hi
I have WebDB 2.2 and Oracle8i instaled on the same computer. I have a problem to create site from another computer. There is not any process when I try to create site. There is always 0%.
But I have no problem with creating site on the origin computer.
Does anybody know something about it?I am just not clear what to do once I have made changes and have published the new information.
You shouldn't have to do anything. iWeb will save the information in the Domain.sites file. You can keep this file in a folder, or even on your desktop and iWeb will launch from a double-click on the file. -
A problem about build project fail...
Hi all, I'm fairly new to iPhone programing and now get a problem about build project fail. ><
I've downloaded a couple of sample codes from Apple web site and build them, but there are some errors messages as below...
Could some body help me to handle this problem?? I'll be very appreciated~
================================ Error msg of "MoveME" sample ============================
Building target “MoveMe” of project “MoveMe” with configuration “Debug” — (21 errors, 1 warning)
Checking Dependencies
warning: couldn't add 'com.apple.XcodeGenerated' tag to '/Volumes/MoveMe/build/MoveMe.build': Error Domain=NSPOSIXErrorDomain Code=2 UserInfo=0x33ba1f0 "Operation could not be completed. No such file or directory"
error: unable to create '/Volumes/MoveMe/build' (Read-only file system)
error: unable to create '/Volumes/MoveMe/build' (Read-only file system)
Unable to create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build
Unable to create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386
Unable to create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build
Unable to create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build
Unable to create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build
Unable to create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build
warning: couldn't add 'com.apple.XcodeGenerated' tag to '/Volumes/MoveMe/build/MoveMe.build': Error Domain=NSPOSIXErrorDomain Code=2 UserInfo=0x33ba1f0 "Operation could not be completed. No such file or directory"
error: unable to create '/Volumes/MoveMe/build' (Read-only file system)
error: unable to create '/Volumes/MoveMe/build' (Read-only file system)
Unable to create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build
Unable to create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386
Unable to create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build
Unable to create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build
Unable to create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build
Unable to create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build
mkdir /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app (error: Read-only file system)
mkdir /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app (error: Read-only file system)
cd /Volumes/MoveMe
<com.apple.tools.info-plist-utility> Info.plist -genpkginfo /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app/PkgInfo -expandbuildsettings -o /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app/Info.plist
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
error: The file “PkgInfo” does not exist.
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
error: The file “PkgInfo” does not exist.
mkdir /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app (error: Read-only file system)
cd /Volumes/MoveMe
/Developer/Library/PrivateFrameworks/DevToolsCore.framework/Resources/pbxcp -exclude .DS_Store -exclude CVS -exclude .svn -resolve-src-symlinks /Volumes/MoveMe/Default.png /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
pbxcp: error: open(): /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app/Default.png [/SourceCache/pbxtools/pbx_tools-1059/pbxcp/fileutils.m:392]: No such file or directory
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
mkdir /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app (error: Read-only file system)
cd /Volumes/MoveMe
/Developer/Library/PrivateFrameworks/DevToolsCore.framework/Resources/pbxcp -exclude .DS_Store -exclude CVS -exclude .svn -resolve-src-symlinks /Volumes/MoveMe/Placard.png /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
pbxcp: error: open(): /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app/Placard.png [/SourceCache/pbxtools/pbx_tools-1059/pbxcp/fileutils.m:392]: No such file or directory
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
mkdir /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app (error: Read-only file system)
cd /Volumes/MoveMe
/Developer/Library/PrivateFrameworks/DevToolsCore.framework/Resources/pbxcp -exclude .DS_Store -exclude CVS -exclude .svn -resolve-src-symlinks /Volumes/MoveMe/DisplayStrings.strings /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
pbxcp: error: open(): /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app/DisplayStrings.strings [/SourceCache/pbxtools/pbx_tools-1059/pbxcp/fileutils.m:392]: No such file or directory
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
mkdir /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app (error: Read-only file system)
cd /Volumes/MoveMe
/Developer/usr/bin/ibtool --errors --warnings --notices --output-format human-readable-text --compile /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app/MainWindow.nib /Volumes/MoveMe/MainWindow.xib
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
/* com.apple.ibtool.errors */
Internal Error:
Description: Compilation failed. Unable to write to path: /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app/MainWindow.nib
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
mkdir /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app (error: Read-only file system)
cd /Volumes/MoveMe
/Developer/Library/PrivateFrameworks/DevToolsCore.framework/Resources/pbxcp -exclude .DS_Store -exclude CVS -exclude .svn -resolve-src-symlinks /Volumes/MoveMe/Icon.png /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
pbxcp: error: open(): /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app/Icon.png [/SourceCache/pbxtools/pbx_tools-1059/pbxcp/fileutils.m:392]: No such file or directory
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
mkdir /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app (error: Read-only file system)
cd /Volumes/MoveMe
/Developer/usr/bin/ibtool --errors --warnings --notices --output-format human-readable-text --compile /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app/MoveMeView.nib /Volumes/MoveMe/MoveMeView.xib
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
/* com.apple.ibtool.errors */
Internal Error:
Description: Compilation failed. Unable to write to path: /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app/MoveMeView.nib
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
mkdir /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386 (error: Read-only file system)
cd /Volumes/MoveMe
/Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin/gcc-4.0 -x objective-c -arch i386 -fmessage-length=0 -pipe -std=c99 -Wno-trigraphs -fpascal-strings -fasm-blocks -O0 -Wreturn-type -Wunused-variable -D_IPHONE_OS_VERSION_MINREQUIRED=20000 -isysroot /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator2.0 .sdk -fvisibility=hidden -mmacosx-version-min=10.5 -gdwarf-2 -iquote /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe-ge nerated-files.hmap -I/Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe- own-target-headers.hmap -I/Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe- all-target-headers.hmap -iquote /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe-pr oject-headers.hmap -F/Volumes/MoveMe/build/Debug-iphonesimulator -I/Volumes/MoveMe/build/Debug-iphonesimulator/include -I/Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Derived Sources -include /var/folders/bW/bWmyU-LjHBKBRZqhplPNE++TI/-Caches-/com.apple.Xcode.501/SharedPrecompiledHeaders/MoveMePrefix-chaljwmdesvmdlfdlkpiazlaoxmy/MoveMePrefix.pch -c /Volumes/MoveMe/main.m -o /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386/main.o
error: couldn't create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386: Read-only file system
{standard input}:unknown:FATAL:can't create output file: /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386/main.o
error: couldn't create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386: Read-only file system
mkdir /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386 (error: Read-only file system)
cd /Volumes/MoveMe
/Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin/gcc-4.0 -x objective-c -arch i386 -fmessage-length=0 -pipe -std=c99 -Wno-trigraphs -fpascal-strings -fasm-blocks -O0 -Wreturn-type -Wunused-variable -D_IPHONE_OS_VERSION_MINREQUIRED=20000 -isysroot /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator2.0 .sdk -fvisibility=hidden -mmacosx-version-min=10.5 -gdwarf-2 -iquote /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe-ge nerated-files.hmap -I/Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe- own-target-headers.hmap -I/Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe- all-target-headers.hmap -iquote /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe-pr oject-headers.hmap -F/Volumes/MoveMe/build/Debug-iphonesimulator -I/Volumes/MoveMe/build/Debug-iphonesimulator/include -I/Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Derived Sources -include /var/folders/bW/bWmyU-LjHBKBRZqhplPNE++TI/-Caches-/com.apple.Xcode.501/SharedPrecompiledHeaders/MoveMePrefix-chaljwmdesvmdlfdlkpiazlaoxmy/MoveMePrefix.pch -c /Volumes/MoveMe/Classes/MoveMeAppDelegate.m -o /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386/MoveMeAppDelegate.o
error: couldn't create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386: Read-only file system
{standard input}:unknown:FATAL:can't create output file: /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386/MoveMeAppDelegate.o
error: couldn't create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386: Read-only file system
mkdir /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386 (error: Read-only file system)
cd /Volumes/MoveMe
/Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin/gcc-4.0 -x objective-c -arch i386 -fmessage-length=0 -pipe -std=c99 -Wno-trigraphs -fpascal-strings -fasm-blocks -O0 -Wreturn-type -Wunused-variable -D_IPHONE_OS_VERSION_MINREQUIRED=20000 -isysroot /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator2.0 .sdk -fvisibility=hidden -mmacosx-version-min=10.5 -gdwarf-2 -iquote /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe-ge nerated-files.hmap -I/Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe- own-target-headers.hmap -I/Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe- all-target-headers.hmap -iquote /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe-pr oject-headers.hmap -F/Volumes/MoveMe/build/Debug-iphonesimulator -I/Volumes/MoveMe/build/Debug-iphonesimulator/include -I/Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Derived Sources -include /var/folders/bW/bWmyU-LjHBKBRZqhplPNE++TI/-Caches-/com.apple.Xcode.501/SharedPrecompiledHeaders/MoveMePrefix-chaljwmdesvmdlfdlkpiazlaoxmy/MoveMePrefix.pch -c /Volumes/MoveMe/Classes/PlacardView.m -o /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386/PlacardView.o
error: couldn't create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386: Read-only file system
{standard input}:unknown:FATAL:can't create output file: /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386/PlacardView.o
error: couldn't create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386: Read-only file system
mkdir /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386 (error: Read-only file system)
cd /Volumes/MoveMe
/Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin/gcc-4.0 -x objective-c -arch i386 -fmessage-length=0 -pipe -std=c99 -Wno-trigraphs -fpascal-strings -fasm-blocks -O0 -Wreturn-type -Wunused-variable -D_IPHONE_OS_VERSION_MINREQUIRED=20000 -isysroot /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator2.0 .sdk -fvisibility=hidden -mmacosx-version-min=10.5 -gdwarf-2 -iquote /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe-ge nerated-files.hmap -I/Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe- own-target-headers.hmap -I/Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe- all-target-headers.hmap -iquote /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe-pr oject-headers.hmap -F/Volumes/MoveMe/build/Debug-iphonesimulator -I/Volumes/MoveMe/build/Debug-iphonesimulator/include -I/Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Derived Sources -include /var/folders/bW/bWmyU-LjHBKBRZqhplPNE++TI/-Caches-/com.apple.Xcode.501/SharedPrecompiledHeaders/MoveMePrefix-chaljwmdesvmdlfdlkpiazlaoxmy/MoveMePrefix.pch -c /Volumes/MoveMe/Classes/MoveMeView.m -o /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386/MoveMeView.o
error: couldn't create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386: Read-only file system
{standard input}:unknown:FATAL:can't create output file: /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386/MoveMeView.o
error: couldn't create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386: Read-only file system
Build failed (21 errors, 1 warning)Ya, something like that...
I'm even new to Mac, thanks for your answer ^^"
Maybe you are looking for
-
I try to play the Itunes song I purchased. I have a new computer, another internet provider since I purchased the songs, and have switched to a new internet browser Internet Explorer 8. I keep getting a dialog box saying "this computer is not authori
-
How to create workflow-status = failed with ContentService?
Hi! For test-purpose I need a workflow with the status "failed". How can I create one? greetings Verena
-
I have been on option one for ever and have never gone over my usage allowance (10gb), now all of a sudden it has shot up. 27gb in august, 43 gb in sept and already on 9.1gb for october. Nothing has changed at my end- no one games on line, downloads
-
ConfigMgr 2012 R2 and SQL Collation
I am planning to install a new ConfigMgr 2012 R2 server and use SQL Server 2012 SP2. Does ConfigMgr 2012 R2 already support other SQL Collations than "SQL_Latin1_General_CP1_CI_AS"? In other System Center 2012 R2 products "SQL_* collations are being
-
Getting ORA-00600, CSS-00152, CSS-00120 When Using csscan
I am getting this error when running CSScan. The solution in metalink says to purge recycle bin. Is this the windows recycle bin or some oracle's internal recycle bin. Purging windows recycle bin did not help. https://metalink.oracle.com/metalink/pls