Problem connecting on SAP Error OADM -2025

Hi,
i have a problem when i try to connect to Database Sap it give me an error message:"Trying to release mutex referred the caller is not the owner".
What does hit means?????
Everyone can help me???
Valentina
Edited by: Valentina Mioli on Jan 3, 2008 2:58 PM

Hello Valentina,
Did you use the example. Could you post (parts) of your code?
For example:
Dim oCompany As New SAPbobsCOM.Company
oCompany.Server = "(local)"
oCompany.LicenseServer = "localhost:30000"
oCompany.CompanyDB = "SBO_PE_RSA"
oCompany.UserName = "manager"
oCompany.Password = "manager"
oCompany.DbUserName = "sa"
oCompany.DbPassword = "sqlpass"
If oCompany.Connect 0 Then
MessageBox.Show("Error: " & oCompany.GetLastErrorDescription)
Else
MessageBox.Show("Connected")
oCompany.Disconnect()
Good Luck
Regards Teun

Similar Messages

Problem connecting to SAP R/3 in CPIC with 6.20 library

Hi,
Any help or suggestion on this problem is highly appreciated. I'm currently facing a problem in connecting to SAP R/3 in CPIC with 6.20 library. The code return error at the call to CMINIT. Below is the code and error message:
============
Source Code:
============
CONVERSATION_ID convid[8];
PCPIC_CHAR dest;
CPIC_INT returnCode;
dest = sapr347;
CMINIT(convid, dest, &returnCode);
if (returnCode != CM_OK)
   printf("CMINIT: %d\n", returnCode);
   printf("SAP-INFO: %s\n", SAP_CMPERR());
   return;
printf("CMINIT succeeded");
===============
Error Message
===============
Return Code: 20 (CM_PRODUCT_SPECIFIC_ERROR)
SAP_INFO:
LOCATION CPIC (TCP/IP) on local host
ERROR partner not reached (host sapr347, service sapgw00)
TIME Wed Jul 14 00:36:36 2004
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -10
MODULE niuxi.c
LINE 1037
DETAIL NiPConnect
SYSTEM CALL connect
COUNTER 1].
NOTE:
=====The same program is working when we use 4.6 library====.
Best regards,
Brian

Hi vasu,
Have you tried connecting with another user? If not, first try doing that (for instance with your user). If connection is succesful compare the users. I think this have something to do with the ALEREMOTE user. Might be an authorization issue.
Try with different users (maybe one with SAP_ALL).
regards,
Dion

Problem connecting to SAP Open Hub

Hi, I am trying to set up a SSIS job  connecting to SAP Open Hub and have with support from the SAP guys been able to get some progress, but it has now stopped up on a error message we're not able to solve. Any suggestion on what can be wrong and
how to solve this? When I run the package I get the following error message:
SSIS package "D:\Source\MSBI\SapLoadStaging\Package3.dtsx" starting.
Information: 0x4004300A at Data Flow Task, SSIS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Data Flow Task, SSIS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, SSIS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, SSIS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at Data Flow Task, SSIS.Pipeline: Execute phase is beginning.
Information: 0x3E8 at Data Flow Task, SAP BW Source: Process Start Process, variant has status Completed (instance DH88PUV2SZBIFKMIF48K3USME)
Error: 0x3E8 at Data Flow Task, SAP BW Source: Process Data Transfer Process, variant /CPMB/HMIJYDZ -> ZOH_VPL has status Ended with errors (instance DTPR_DH88PUV2SZCA46Y9QNO66A6W6)
Error: 0x3E8 at Data Flow Task, SAP BW Source: The component is stopping because the Request ID is "0".
Error: 0x3E8 at Data Flow Task, SAP BW Source: No data was received.
Error: 0xC0047062 at Data Flow Task, SAP BW Source [41]: System.Exception: No data was received.
   at Microsoft.SqlServer.Dts.SapBw.Components.SapBwSourceOHS.PrimeOutput(Int32 outputs, Int32[] outputIDs, PipelineBuffer[] buffers)
   at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostPrimeOutput(IDTSManagedComponentWrapper100 wrapper, Int32 outputs, Int32[] outputIDs, IDTSBuffer100[] buffers, IntPtr ppBufferWirePacket)
Error: 0xC0047038 at Data Flow Task, SSIS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on SAP BW Source returned error code 0x80131500. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Information: 0x40043008 at Data Flow Task, SSIS.Pipeline: Post Execute phase is beginning.
Information: 0x4004300B at Data Flow Task, SSIS.Pipeline: "OLE DB Destination" wrote 0 rows.
Information: 0x40043009 at Data Flow Task, SSIS.Pipeline: Cleanup phase is beginning.
Task failed: Data Flow Task
Warning: 0x80019002 at Package3: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (5) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches
the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "D:\Source\MSBI\SapLoadStaging\Package3.dtsx" finished: Failure.
The program '[6916] DtsDebugHost.exe: DTS' has exited with code 0 (0x0)
Regards
Paal

Hi Paleri,
According to the
thread which has the same error message, the issue may be caused by incorrect RCF settings. Could you double check your RCF connection configurations such as DNS settings?
If it is not the case, please also make sure you have installed the correct version of Microsoft Connector for SAP BW.
Reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/e2fbafe5-d9df-490a-bfad-3d4b9784a8ea/sap-bi-connector-for-ssis-2008?forum=sqlintegrationservices
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Crsytal Report Connection to SAP :Error invalid Request

Dear All
We have SAP EHP7.
We have Crystal Report 2013 installed.
We tried to connect to SAP tables through new connection, it gives me the following Error.
Subsequently we tried to import the transport requests (as suggested). But it gives invaid Request error.
Kindly, help me where to find the correct transport requests.
Regards,
Venkat

are you connecting through odbc? if so check to see if you are using windows authentifiction or sql.
make sure the user you are trying to pass has read access to the database

Problem connecting to Server error message... a lot

Hi all,
Im running the latest version of Yosemite (Macbook Pro 2009) and I'm having some strange issue.
I used to have a NAS on my network but at the moment it isn't connected. This wouldn't normally be a problem with the exception that it causes me 2 issues that are really quite annoying
First issue is Google Chrome seems to now take 5 mins or so to load...I believe this and the second issue are actually connected
Second issue, I now get the following error message about 5 times which I have to "OK' before it finally dissapears and let me get on with my life.
"There was a problem connecting to the server...(name)
The server may not exist or it is unavailable at this time, check the server name or IP and try again...OK"
Anyone got any ideas why this is happening and how I can stop it?
Thanks in advance.

There are many possible causes for this issue, and it may be very hard to resolve without wiping your account clean of everything except documents as a last resort. Please take each of the following steps that you haven't already tried. Back up all data before making any changes.
If you get the alert in the login screen before you log in, stop here and ask for instructions.
Step 1
If you get the alert as soon as you log in, it's probably caused by one of your login items or by software that otherwise loads at startup or login. Ask if you need help identifying it. Known offenders are "1Password" and "Adobe Resource Synchronizer."
Step 2
If there's an icon representing the server in the sidebar of a Finder window, hold down the command key and drag it out.
Step 3
In the Finder, press the key combination command-K or select
          Go ▹ Go to Server...
from the menu bar. In the upper right corner of the window that opens is a Recent Servers popup menu represented by a clock icon. From that menu, select
          Clear Recent Servers…
and confirm. Test.
Step 4
Open the Printers & Scanners pane in System Preferences and delete any network devices you no longer use. If in doubt, delete them all and add back the ones you want.
Step 5
Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing command-C:
~/Library/PDF Services
In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. A folder may open. If it does, move the contents to the Desktop, or to a new folder on the Desktop. Log out and log back in. Test. If there's no change, put the items you moved back where they were and continue.
Step 6
Open the folder
~/Library/Preferences
as in Step 5 and move the file named "loginwindow.plist" items in that folder to the Trash, if it exists (it may not.)
Log out and back in again, and test.
Step 7
Other possible causes are references in the iPhoto, iTunes, or iMovie library pointing to the server, bookmarks in the Preview application, and PDF files created by Adobe Acrobat with embedded scripts.
Try rebuilding the iPhoto library, if applicable.
Step 8
Resources such as images or sounds stored on the server may have been added to various applications. Examples would be pictures added to Contacts and custom sounds added to Mail. The range of possibilites here is practically infinite, so I can't be more specific. You might get a hint by launching the Console application and looking for error messages that appear at the same time as the alerts.
Step 9
Disconnect all wired peripherals except those needed to start up. Start up in safe mode. Test. After testing, restart as usual (not in safe mode) and verify that you still have the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Step 10
Triple-click the line below to select it:
/System/Library/CoreServices/Directory Utility.app
Rght-click or control-click the highlighted text and select
          Services ▹ Open
from the contextual menu.* The application Directory Utility will open.
In the Directory Utility window, select the Directory Editor tool in the toolbar. Select Mounts from the Viewing menu in the toolbar, and/Local/Default from the node menu, if not already selected. On the right is a list of names and values. By default, the list is empty. If it's not empty, post a screenshot of the window and stop here.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.
Step 11
Open the following file as you did in the last step:
/etc/auto_master
It will open in a TextEdit window. The contents should be exactly this:
# Automounter master map
+auto_master          # Use directory service
/net               -hosts          -nobrowse,hidefromfinder,nosuid
/home               auto_home     -nobrowse,hidefromfinder
/Network/Servers     -fstab
/-               -static
If there are any other lines in the window, post them. Otherwise, close the window.

Problem Connecting with SAP R3 for creating new model

Hi,
i have a problem with connecting to the SAP R/3 when i want to create a new model with BAPIs.
The error is:
Internal Error has occured.
Plugin name: Web Dynpro Model Editor Services
Method: next Pressed
Message: Internal error - see detail information in exception trace.
Exception: Failed to execute runnable
How do i get to the exception trace, or what could be the problem?
Regards. Stefan

Hi, thanks for your answer.
I changed the things, but now this problem appears.
org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
JCO.nativeInit(): Could not initialize dynamic link library librfc. Found version "620.0.941" but required at least version "620.0.1220".)
What can i do with this mistake?

Problems connecting IOS devices with new Comcast wireless cable modem?

Just installed a new cable modem from Comcast, it is their new high speed unit manufactured by Cisco. of the three IOS devices I've tried, all running currently the OS , are having problems connecting with the error "Unable to join the network " Home-XXXX" if you keep asking it may connect but I have to be persistant. My Devices are iPad 4 g Retna with 30pin connection, an iTouch ,latest model with camers, and current iPad mini. is it me or the modem?

You have probably already solved this issue, but I would hide the comcast wifi network (dont broadcast ssid) and make the password very hard. Make sure that put it on channel that does not conflict with your Airport Extream.
Connect the Comcast modem/router to the airport extream's wan port with an ethernet cable.
Comcast usually ships the DHCP enabled. Use the comcast DHCP server for your airport.
Configure the airport extream to "create a network" set the network to "bridge mode".
Name your network, broadcast the ssid all on the airport. Now all your devices will connect everytime. Use can use the Comcast "private" wireless network for maintenance, etc.
Just some thoughts... good luck

BO 4.0: Database error:Unable to connect to SAP BW server Incomplete logon

Hello Experts,
I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers
I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
Database error: Unable to connect to SAP BW server Incomplete logon data -
If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
Desired outcome:
I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
Any help in this matter would be greatly appreciated.
Thanks & regards,
CD.

Whether your problem is solved?
We have the same problem in BO Mobile.
Two users from one BW-role, BO-groups; one user report is executed, another user - error incomplete logon data. In Web Intelligence both users reports succeeds.

Live Office Error when connecting to SAP BW data (Offline dashboard)

Hi experts,
we have built up an Live Office connection to SAP BW query data to create a dashboards, which can show the data also in offlne mode. We are using exactly the same procedure as recommanded by Ingo Hilgofort in [End-to-End Scenarios With Xcelsius 2008|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/90ad73b1-506c-2b10-9e9b-9fde523f010a].
When trying to refresh the Live Office connection using the "Refresh" button in the dashboard we receive the error LO 26301: The current refresh option requires a report instance that does not exist.
The recommended action is: Change the refresh option of the object or use the CMC to schedule a new instance.
But creating an instance of the dashboard is not possible. What is meant by that? Is it necessary that we embed the Xcelsius flash into a PDF or a Crystal Report? What are our alternatives?
Best regards,
Sebastian

Sebastian Koeffer wrote:
Hi Gowda,
>
> an instance of the report did not solve our problems. Even if it does, this is not our preferred solution. Anyway we would like to prefer to use the direct universe connection (Create new universe query) instead of linking to a Webi or Crystal report.
>
> Best regards,
> Sebastian
Hi Gowda Timma Ramu,
i create an instance of report by USER1... and..... dashboard is pointed to latest instance.
when i refresh a dashboard (by clicking on refresh button) it requires login to infoview ... i login to infoview by USER 2 not by USER1.....
it showing an error
_The current refresh option requires a report instance that does not exist. (LO 26301)_
Note:-But data is changing in dashboard
any solution for solving this error.
Its urgent...
Thank You.

Authentication error when creating EPM Add-in connection with SAP BO Enterprise connection type

Hello, Experts,
I have a problem with creation of EPM Add-in connection when SAP BusinessObjects Enterprise connection type is selected.
An error message is "Error while communicating with the server. Framework message: Authorization failed."
Here are the steps that were implemented and how this issue was reproduced:
SAP BusinessObjects Planning and Consolidation 10.0 SP12 for Microsoft was installed and configured.
Integration between SAP BPC and SAP BusinessObjects BI 4.1 SP02 was implemented. SAP BO users can successfully connect to SAP BPC system.
EPM connector was successfully installed and deployed in SAP BusinessObjects BI server.
BPC ODBO 2.0 SP04 64BIT was installed in SAP BusinessObjects server.
EPM connection was successfully created in SAP BusinessObjects CMC.
EPM Add-in and BPC ODBO 2.0 SP04 32BIT was installed in another computer (let's call it CLIENT) which has MS Office 2007 32BIT installed.
From CLIENT computer we have launched Excel manually and successfully created BPC connection with Connection Type - Local.
Then we have logged into BI Launch Pad and launched New / EPM document (Excel). Excel has started.
In EPM Add-in we have pressed Logon.
In connection window selected SAP BusinessObjects Enterprise connection type.
An error "Error while communicating with the server. Framework message: Authorization failed." appears.
Before this error appears we are not getting any window where we could select EPM connection (created in CMC) nor the possibility to enter username or password.
Looking forward you valuable comments and suggestions.
Thank you in advance.
Donatas Budrys

Dear, Roberto,
Our user has Full Access to all BPC tasks and it is administrator in BI system.
Also we can successfully connect with the same user using Connection type "Local".
We had done some investigation and in the BPC SQL Server trace log we can catch the following message when an error occurs:
==============[System Error Tracing]==============
[System Name] : BPCXMLAService [Message Type] : ErrorMessage [Job Name] : ValidateUser [DateTime] : 04/23/2014 10:58:06 [UserId] : [Exception] DetailMsg : {System.Exception: Invalid user at SAP.BPC.Services.Webservice.XMLAService.XMLAService.ValidateUser()} ==============[System Error Tracing End ]==============
It is very interesting that after the EPM workbook is launched via BI Launch Pad till an error occurs we are NOT provided with possibility to enter any username and password. So the EPM add-in should use the same user which was logged into BI Launch Pad - in our case the user with administrative rights both in BI Launch Pad and BPC systems. Am I missing anything?
Looking forward your feedback.
Thank you in advance.
Best regards,
Donatas

Problem in connecting to Sap R/3 system through Crystal Reports

Hi
while I am connecting to Sap R/3 system through crystal reports i am getting an error
(" you do not have a necessary rights to design reports against sap system ")
can anyone sort out this problem?
Thanking in advance

you need to add some transport files while installing the integration kit for sap solutions.check whether all transport files are added

Error " Could not connect to SAP R/3 system"

HI:
We have been having some problems with our portal lately and most recently the error that we get is "Could not Connect to SAP R/3 "
The system landscape settings have not been changed.
Thanks for your responses.
Rachel

When I log into the portal and launch the MSS iviews I get the error ( Could not Connect to SAP R/3).
Similarly when I launch ESS I get the following error:
I see that it is lost connection with our SAP R/3 HR system. And system parameters that are available now
are just SAP BW, SEM and CRM..
So looks like we need to re-establish the connection..(?)
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
System 'pcd:portal_content/wwy.KeyStone/com.nrx.pct.vip.systems.sapr3' alias 'SAP_R3_HumanResources' not found. Please check the system object and the alias..
See the details for the exception ID in the log file
com.sap.portal.appintegrator.sap.IAC::IAC/SSOLayer
Parameter Dump
ApplicationParameter
ClassName com.sapportals.portal.appintegrator.layer.SingleSignOnLayer
CodeLink com.sap.portal.appintegrator.sap.bwc.IAC
DebugMode false
DebugMode.default false
DebugMode.type select[false,true]
ExportParameters Authentication, LogonUser, RequestMethod
ForcedRequestLanguage
IAC PP_MY_Profilematchup
MandatoryParameters System, IAC
NavPathUpdate false
NextLayer IAC/ConnectionLayer
OptionalParameters ApplicationParameter, DebugMode
SSO2Template
System SAP_R3_HumanResources
System.type lookup:com.sapportals.portal.appintegrator.lookup.SystemLookup
TopLayer IAC/SSOLayer
UserMappingTemplate login=<MappedUser>&password=<MappedPassword>&~mysapcomusesso2cookie=0
Wizard.MandatoryParameters System, IAC
Wizard.OptionalParameters ApplicationParameter
X509Template
buildTree false
com.sap.portal.reserved.iview.IsolationMode URL
com.sap.portal.reserved.iview.WizardURL pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.defaultIViewWizard
com.sap.portal.appintegrator.sap.IAC::IAC/SSOLayer
MandatoryParameters
System   SAP_BW SAP_BW_Q22 SAP_BW_SAND SAP_CRM SAP_CRM_SAND SAP_SEM
Internet Application Component (IAC)
OptionalParameters
Application Parameters
DebugMode No Yes

HPUX on IA64: Error when connecting to SAP via librfc

Hello,
I'm trying to develop a C-program to call ABAP-Functions. On Windows this works fine (example program from the book "SAP-Schnittstellenprogrammierung" by Meiners/Nüßer), but on HP-UX on IA64 I get:
**** Trace file opened at 20060919 115449 MESZ SAP-REL 700,0,61 RFC-VER 3 834459
resize I/O buffer to 16000 bytes
>>>> [1] <unknown>    : EXT <ac: 1> L w2sap >>> OPEN
UUID: ab_drvstate create uuid {450FBE6A-BE69-25F1-E100-0000C06D4F88}
======> Connect to SAP gateway failed
Connect_PM GWHOST=w2sap, GWSERV=sapgw00, SYSNR=00
LOCATION    CPIC (TCP/IP) on local host
ERROR       internal error
TIME        Tue Sep 19 11:54:49 2006
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -1
MODULE      nixxi.cpp
LINE        2762
DETAIL      NiICheckPendConnection
SYSTEM CALL poll, getsockopt
ERRNO       2050
COUNTER     3
>>>> [1] <unknown>    : EXT <ac: 2> L w2sap >>> CLOSE abrfcio.c 611
-{450FBE6A-BE69-25F1-E100-0000C06D4F88}
==== Delta 0   0 LOG DROPPED
>>> RfcOpenEx ...
Got following connect_param string:
   CLIENT=000 USER=BCUSER PASSWD=******* LANGUAGE=DE ASHOST=w2sap SYSNR=00 ABAP_DEBUG=0 LCHECK=0 TRACE=1 USE_SAPGUI=0
<<< RfcOpenEx failed
I presume it has something to do with 32/64 Bit, because we also had problems with our own programs. On HPUX socklen_t is 64 bit (parameter of getsocket), and perhaps librfc thinks, it only has 32 bit and give an int as parameter.
Is there anything I can do?
Thx.
Roger

I am also getting this error when using VitalStream. Was an
answer ever found this this issue? If anybody has any suggestions,
all help is appreciated.
Error #2044: Unhandled AsyncErrorEvent:. text=Error #2095:
flash.net.NetConnection was unable to invoke callback streamInfo.
error=ReferenceError: Error #1069: Property streamInfo not found on
mx.controls.videoClasses.NCManagerConnectClient and there is no
default value.
at mx.controls.videoClasses::NCManager/::connectRTMP()
at mx.controls.videoClasses::NCManager/connectToURL()
at mx.controls.videoClasses::VideoPlayer/::_load()
at mx.controls.videoClasses::VideoPlayer/load()
at mx.controls::VideoDisplay/load()
at mx.controls::VideoDisplay/::autoPlaying()
at mx.controls::VideoDisplay/::creationCompleteHandler()
at
flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.core::UIComponent/dispatchEvent()
CODE
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute">
<mx:Panel title="VideoDisplay Control Example"
height="75%" width="75%"
horizontalAlign="center"
paddingTop="10" paddingLeft="10" paddingRight="10"
paddingBottom="10">
<mx:Text width="75%" color="blue"
text="Use the buttons to control the video. The Stop button
resets the video to the beginning."/>
<mx:VideoDisplay
id="myVid"
height="158"
width="211"
source="rtmp://LINK REMOVED"
autoPlay="false"/>
<mx:HBox>
<mx:Button label="Play" click="myVid.play();"/>
<mx:Button label="Pause" click="myVid.pause();"/>
<mx:Button label="Stop" click="myVid.stop();"/>
</mx:HBox>
<mx:HBox>
<mx:Label text="{myVid.bytesLoaded} of
{myVid.bytesTotal}" />
<mx:Label text="{myVid.playheadTime} of
{myVid.totalTime}" />
</mx:HBox>
</mx:Panel>
</mx:Application>
Text

Error when loading templates on connection to SAP-BPC

Dear Experts,
I have a user who has a error when connecting to SAP-BPC. The error message this user gets is:
bold"AUTOMATION ERROR: an attempt was made to load a program with an incorrect format"bold
Do you have any idea on how to solve this problem?
Thank you very much for your help.
Kind regards,
Chanthy CHONGKAM

Hi,
We already tried to connect with the user login on another computer and it worked correctly.
We also reinstalled Excel and SAP-BPC but with no sucess. The same error message appears.
Kind regards,
Chanthy

"Connect to SAP gateway failed" error message when we connecting bex to bw

any one can help in connecting bex with BW.
we got a error when we are trying to connect bex to bw from offshore. as we do not have basis consultant we only need to connect bex with BW.
"Connect to SAP gateway failed".
RFC_ERROR_COMMUNICATION
But it is working properly connecting to onsite team.
this is the first time we are connecting from offshore.

You didnt answer the first question of when exactly are you getting this error message - during direct logon to BEx or using transaction RRMX. Anyways, I assume both are giving the error.
Check how the SAP logon pad is configured to access the BW server currently.
In our case the problem was resolved by using the server machine name instead of the IP address to logon to the BW server.
If you are currently using the IP address in the logon pad then change it to the server machine name instead.
Also, make this entry in your hosts file (windows>system32>drivers>etc>hosts) add an entry like:
<IP Address> <bw_server_machine_name>
save the file, reboot the system and then try logging onto BEx again.
If it still does not work - send me screenshots of the logon pad configuration you have for the BW server.
Hope this helps,
Regards,
Nikhil
Message was edited by: Nikhil Chowdhary

Problem connecting on SAP Error OADM -2025

Similar Messages

Maybe you are looking for