Problem in adding fields in ADRC

We are finding problem in adding and deleing fields n ADRC. We have added few fields to ADRC however when we are adding same through Append structure and adjust its giving problem.
We are suspecting field created in data dictionary but not added in database (Oracle).
Please let us know your views and suggest proceeding further.

We are suspecting field created in data dictionary but not added in database (Oracle).
So let's make sure:
Check ABAP dictionary in SE11.
Check Oracle dictionary in sqlplus:
sqlplus <schema>/<password>
describe ADRC

Similar Messages

Problems with Adding Fields/Columns to Crosstab in XI

Post Author: ph03nix
CA Forum: General
I am having problems with formatting a crosstab report in CRXI and am hoping that someone has a solution.
The crosstab report is a subreport, and requires the following columns, grouped by Firm (also not working optimally, but at least working):
Evaluator, Factor1Rate,[Factor2Rate, .., FactorNRate], Summary, UpdateDate, UpdatedBy
Where:
Evaluator is the person that did the evaluation that resulted in each rating (formula field)
Factor1Rate, etc, may have one, many, or all of these be applicable - there can be up to 15 of these. Each FactorRate column is to display the "rating" given by the Evaluator in the corresponding row/column (this much works). The table heading is a formula, but the corresponding rate is not.
Summary should display "Complete" if and only if there is a Comment field (not displayed) filled out for each FactorNRate that has a value of 0, 1 or 5 - otherwise it is blank
DateEntered is one of 2 fields ("last_updated" , or "creation_date" if last_updated is null - a formula field)
UpdatedBy is the last name of the person who last touched the ratings (formula field)
I have gotten the FactorRates to display in the headers, and gotten the corresponding rates to display underneath them, but I cannot seem to add any other columns to the report - they are either added as headers with the factor_rating columns repeated as subgroups (with incorrect data), or are added under existing headers with duplicates of the ratings. I just want to add one column for each field as if it were a normal (non-crosstab) table.
TIA!

the 3 last files
Attachments:
Z1&Z2.vi ‏19 KB
tau_inn (SubVI).vi ‏16 KB
tau_ut (SubVI).vi ‏10 KB

Problem in Adding Field in the View

Hi Friends,
I want to add one field in the view of Interaction Center Webclient.
I copied the view to the Custom BSP and when i try to Add the attribute in context node the Required Attribute is not available in BOL Entity.Please Help me How to Proceed this.
Thanks & Regards,
Ashok.

Hi,
Create ITAB as follows:
Fetch all the data from all the columns SME001 to SME016 in the respective columns in internal table itab.
Make use of field-symbol to add the value of the corresponding columns as follows:-
<FS1> as line type of ITAB
<fs2> type any.
Assume period selected is 007
LOOP AT ITAB ASSIGNING <FS1>
DO.
IF PERIOD = 000.
exit.
ENDIF.
Concatenate 'SME' period into LV_VARIABLE.
Assign component LV_VARIABLE of structure <FS1>
to <FS2>.
if <FS2> is assigned.
sum = sum + <FS2>
endif.
period = period - 1.
ENDDO.
ENDLOOP.
So now sum will contain the sum of the values of SME001 to SME007.
I hope it is clear.
Regards,
Ankur Parab

Problem in Adding field to alv

Hi,
     I have created my zreports in that i want to add order probability for sales order,inquiry ,quotation . But valus coming in report only 100. But according to customer requirement i want 30% for inquiry and 70% for quoatation . how toa dd these values?
     And 1 more when i wil press f4 it should dispaly values like 00 ,10,20......100.
Its a std field in vabk n vbap.How to get these requirement?
     Thanx in advance.
I wil never forget to reward if solution works.

Hi,
    use this funtion moudule
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
       exporting
            retfield    = 'BUKRS'
            dynprofield = 'BUKRS'
            dynpprog    = sy-cprog
            dynpnr      = sy-dynnr
            value_org   = 'S'
       tables
            value_tab   = it001.
and handle the f4 in subroutine user-command of AlV report and when u select a value then append that value in main internal table for that particular record.

Problem in adding field values?

Hi all,
I am using table COSP in my program. The requirement is i need to add the field values(SMEXXX) of this table structure until the period entered in seletion-screen.
i.e if the period is 005.
i need to add
SME001 UNTIL SME005 TO a variable.
if the period is 007 then
SME001 UNTIL SME007.
I need the logic to choose the no of field values dynamically? please help me.
Thanks,
aravind.

Hi,
Create ITAB as follows:
Fetch all the data from all the columns SME001 to SME016 in the respective columns in internal table itab.
Make use of field-symbol to add the value of the corresponding columns as follows:-
<FS1> as line type of ITAB
<fs2> type any.
Assume period selected is 007
LOOP AT ITAB ASSIGNING <FS1>
DO.
IF PERIOD = 000.
exit.
ENDIF.
Concatenate 'SME' period into LV_VARIABLE.
Assign component LV_VARIABLE of structure <FS1>
to <FS2>.
if <FS2> is assigned.
sum = sum + <FS2>
endif.
period = period - 1.
ENDDO.
ENDLOOP.
So now sum will contain the sum of the values of SME001 to SME007.
I hope it is clear.
Regards,
Ankur Parab

Problem in adding custom table's field in MM46

Hi,
I have a complex requirement of adding fields of custom table in MM46 for mass maintance.
I did most of the part but dont know what is missed.
Steps that i followed
1. used tcode MASSOBJ- I Added Ztable name to application table for Object type - BUS1001001.Here i dont know what to provide in other attributes of entry example Number, DB table etc. [SCREENSHOT OF MASSOBJ|https://plus.google.com/photos/114088763388693559922/albums/5704943614516268609]
2. Used tcode OMSR- I added entry of Ztable'field here i gave selection group as 211, maint status as KDEVALBQPSZXCFG
alv group- blank. [screen shot of OMSR |https://plus.google.com/photos/114088763388693559922/albums/5704943614516268609]
After doing these steps Table name and field of table is visible in mm46. But problem is Field is not editable that is in display mode only.
Pleae see this snapshot - [error image|https://plus.google.com/photos/114088763388693559922/albums/5704938582830478801]
Please help me by telling what i missed and am i adding right attributes for entries in MASSOBJ AND OMSR?
Thanks.
Waiting for expert's comments.
Reagards
Rahul
Please do not use words like 'urgent'
Edited by: Rob Burbank on Feb 3, 2012 11:31 AM

Hi Rahul,
Wellcome to SDN. Perhaps you know it, and although it's for older releases, perhaps it could help you. Please, see SAP Note 381942 - Mass changes for logistics data in the article master.
I hope this helps you
Regards
Eduardo

Problem with manually added field.

Hi,
I added a field to a table with sql studio.
There are problems about that field.
My application does not recognise that field. (wd java app.)
What must i do make field with no problem?
Thanks.

> I added a field to a table with sql studio.
> There are problems about that field.
> My application does not recognise that field. (wd java app.)
> What must i do make field with no problem?
No offense but to stay with your language: You have to tell "your application" that there is a new field.
Since we have no idea how you access the system, where you added that field and what you expect to happen nobody can help you.
Markus

Problem with adding new field to the mass change screen in FBL5N

Hi,
We have a problem with adding the field XREF3 to the mass change screen. We followed steps described in the SAP Note 640908, but the result is that when we try to mass change some documents in FBL5N and enter some values in the mass change screen, a message appears: "Please enter at least one new value" and nothing is changed.
If you have faced with such a problem, we would be grateful if you give us some tips.
Regards,
Miłosz Włodarczyk

The problem has been resolved: we didn't activate a code in SE80.

2LIS_02_ITM - Adding field problem

While adding field KTWRT from LBWE to 2LIS_02_ITM ,I get the error as below.
Entries for application 02 still exist in the extraction queue ->
Message no. MCEX151
Diagnosis
Changing extraction structure MC02M_0ITM for application 02 is forbidden, because there are entries that have not yet been processed into an extraction queue for application 02 for at least one client.
If an extraction structure is changed to the entries that are still open in an extraction queue, then these are no longer able to be read and can cause terminations with the collective update.
Procedure
Start the collective update using the function "Job Control" in the Logistics Extraction Structures Customizing Cockpit.
To get an overview of the logistics extraction queues, see the Logistics Queue Overview.
Sounds stupid ,however activities i carried out as listed below to ensure all the steps i covered.
PS -
<b>All the contents from LBWQ,SM13,RSA7,Setup table in all the clients available in R/3 system has been deleted.
Deactivated the update.
</b>
Any help appreciated
Thanks
Chetan
@CP..

Hi,
I am getting the same error.
There are no entries in LBWQ for the MCEX11 and
also no entries in SMQ1 for application 11.
I also ran the collective update using job control with immediate option. There were zero LUW's that were processed.
But, still the error is returned,
Entries for application 11 still exist in the extraction queue ->
Message no. MCEX151
Diagnosis
Changing extraction structure MC11VA0SCL for application 11 is forbidden, because there are entries that have not yet been processed into an extraction queue for application 11 for at least one client.
If an extraction structure is changed to the entries that are still open in an extraction queue, then these are no longer able to be read and can cause terminations with the collective update.
Procedure
Start the collective update using the function "Job Control" in the Logistics Extraction Structures Customizing Cockpit.
To get an overview of the logistics extraction queues, see the Logistics Queue Overview.
Chetan, Can you please let me know,
how you were able to resolve?
Thanks,
Raj

Problem with adding user fields to user table

hi everyone,
i have written code to create user tables and some user fields to that table....
its working fine...
in the code i have some conditions like if the table is already created.. then it should execute the code written for creating table..?
udTables1 = oDICompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
            If udTables1.GetByKey("FA_MASTERDATA") Then
                udTables1 = Nothing
            Else
                udTables1.TableName = "FA_MASTERDATA"
                udTables1.TableDescription = "Fixed Assets Master Data"
                udTables1.TableType = SAPbobsCOM.BoUTBTableType.bott_MasterData
                ret2 = udTables1.Add()
System.Runtime.InteropServices.Marshal.ReleaseComObject(udTables1)
                udTables1 = Nothing
                GC.Collect()
            End If
but how to check the same condition for adding fields????
udfields1 = oDICompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields)
            '' 1st field
            udfields1.TableName = "FA_MASTERDATA"
            udfields1.Name = "Alias"
            udfields1.Description = "Alias"
            udfields1.Type = SAPbobsCOM.BoFieldTypes.db_Alpha
            udfields1.EditSize = 20
'''how to write condition to check whether the field is already creatd or not????
            ret3 = udfields1.Add()
System.Runtime.InteropServices.Marshal.ReleaseComObject(udfields1)
            udfields1 = Nothing
            GC.Collect()

hi try this..
oUserFieldsMD = muc_ParentAddon.SBO_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields)
            '********Adding 1st Field
            If Not IsFieldExist("POR1", "PINo") Then
                oUserFieldsMD.TableName = "POR1"
                oUserFieldsMD.Name = "PINo"
                oUserFieldsMD.Description = "Purchase Indent No"
                oUserFieldsMD.Type = SAPbobsCOM.BoFieldTypes.db_Alpha
                oUserFieldsMD.EditSize = 20
                lRetCode = oUserFieldsMD.Add
                If lRetCode <> 0 Then
                    muc_ParentAddon.SBO_Company.GetLastError(lErrCode, sErrMsg)
                    MsgBox(sErrMsg)
                    Return False
                    Exit Function
                Else
                    Fields = True
                End If
            End If
            System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserFieldsMD)
Private Function IsFieldExist(ByVal as_TableName As String, ByVal as_FieldID As String) As Boolean
        Dim flag As Boolean
        Dim businessObject As SAPbobsCOM.Recordset
        Try
            businessObject = DirectCast(Me.muc_ParentAddon.SBO_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset), SAPbobsCOM.Recordset)
            businessObject.DoQuery(String.Concat(New String() {"Select * From CUFD Where TableId = '", as_TableName, "' AND AliasID='", as_FieldID, "'"}))
            If (businessObject.RecordCount > 0) Then
                flag = True
            Else
                flag = False
            End If
        Catch exception1 As Exception
            Me.muc_ParentAddon.SBO_Application.SetStatusBarMessage(exception1.Message, SAPbouiCOM.BoMessageTime.bmt_Short, True)
        End Try
        System.Runtime.InteropServices.Marshal.ReleaseComObject(businessObject)
        Return flag
    End Function
hope it helps

Adding field GAMNG ( Target Quantity )in the Data Source 2LIS_04_P_ARBPL

We are adding field GAMNG ( Target Quantity ) in the Data Source 2LIS_04_P_ARBPL ( Work Center View from PP/PP-PI )
The field GAMNG is available in the communication structure maintainace.
The problem is- We are not able to drag & drap field GAMNG from the Communication structure LBWE. Getting the error - End phase 002 ***********************************************************
Message no. D0322 ..
We deleted Setup table , Meins field already exist in comm str.
1. How we able to drag the field from the communication structure as getting the above error. We searched SDN & try to follow that method but not working.
2. We can add the field in SE11 - Structure -Manually, then we have to write ABAP code.
Kindly suggest correct answer.
Edited by: sk kamaruzzaman on Dec 20, 2011 2:08 PM

Hi,
There could be a number of reasons why you are getting the error:
1. Fields are not assigned to datatypes.
- Check structure in SE11 and assign to datatypes.
2. There are inactive appends in the extract structure.
- Double-click one of the includes. You will get a new screen with the INCLUDE structure. Click the button append-structure. Check if the append is inactive.
3. The appended structure is in a different development class from the one of the structure it is being appended to.
Please review and apply the following notes carefully :
766603 Activation problems with extract structures
623411 LBWE: Gener. terminates with D0 322 (end phase 002)
757923 LBWE: Generation terminates with D0 322 (end phase
600708 D0 322: End phase 002
It is not possible to enhance the datasource 2lis_04_MATNR with the field GAMNG (so its possible that its the same for 2LIS_04_P_ARBPL) because GAMNG has the reference field AMEIN, which has a STATE F (forbidden) in table TMCEXCFS .
Check to see if this is the same on your system.
Rgds,
Colum

Problem with adding Sun JSF RI v1.2 as a new library in JDeveloper 10.1.3.1

Hi,
I have a problem with adding a latest JSF 1.2 RI from Sun (https://javaserverfaces.dev.java.net/files/documents/1866/44998/jsf-1_2_03.zip) to JDeveloper as a new library.
I created a new User library and added into it jsf-impl.jar and jsf-api.jar from JSF 1.2 RI.
Then I try to create two new JSP Tag libraries based from .tld files.
When a .tld file is placed in "TLD File:" field there is no information below about Library Version and Required JSP Version. If I check "Execute Tags in JSP Visual Editor" and click "Customize" button - list of tags in "Customize Tag Library" window is empty.
I have errors when I try to use JSF Tags from this new library in JSP page like :
"Can't create tag instance: f:view (class: null). Make sure, that the tag class or a library contained this class is available in this application"
(free translation to English)
Is this possible to add JSF RI v1.2 as another library in Jdeveloper 10.1.3.1 ?
thanks for help
koli

Hi,
This solution is not exactly for Jdeveloper 10.1.3.x I think.
- "Create a JSF system library." section, point 2. - there is not possible to add library in folder other than User I see, so I added it in User folder.
- "Register the JSF JSP tag libraries." section, point 5. - in JD 10.1.3 there is no dialog box, I checked checkbox "Show Tag Library in Palette". A new library was added to User folder but there is no new libraries in component Palette.
Even as I use "Edit tag libraries .." from Component Palette context menu and add manually new tag libraries to selected, there is no libraries in Component Palette after it.
I feel so problem is with different .tld files format, not with adding libraries method.
Sun RI tld file (from version 1.2_03) fragment:
<taglib xmlns="http://java.sun.com/xml/ns/javaee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-jsptaglibrary_2_1.xsd"
version="2.1">

<description>
The core JavaServer Faces custom actions that are independent of
any particular RenderKit.
</description>
<tlib-version>1.2</tlib-version>
<short-name>f</short-name>
<uri>http://java.sun.com/jsf/core</uri>
tld included in JD:
<!DOCTYPE taglib
PUBLIC "-//Sun Microsystems, Inc.//DTD JSP Tag Library 1.2//EN"
"http://java.sun.com/dtd/web-jsptaglibrary_1_2.dtd">
<taglib>

<tlib-version>1.0</tlib-version>
<jsp-version>1.2</jsp-version>
<short-name>f</short-name>
<uri>http://java.sun.com/jsf/core</uri>
<description>
The core JavaServer Faces custom actions that are independent of
any particular RenderKit.
</description>
Did JDeveloper 10.1.3.x maintain with taglib version 1.2 ?
Regards
koli

Adding field in the standard report

Hi ,
i have added the one field in the standard transaction VL06 , in the outboud deliveries report according to the Note 605460. I have to add the field in LIPOV structure.
after adding that field(include structure), in output i am not getting that added field.
please help me .
regards,
ajay reddy

>
Ajay reddy wrote:
> hI,
>
> i got the one more note to display added field in the report . (Note : 128154)
>
> thanks for your tme
>
> regards,
> Ajay reddy
Hi Ajay,
I have the same problem. I have added the field in the field catalog and the field in the final internal table also.
But sometimes its displayed and sometime not.
Looking forward for some help here.
Varun

Adding Fields to Custom Infotype Using Custom Infoset in SAP QUERY

Hi All,
We have a requirement to add fileds to a custom infotype for querying Custom Infoset in SAP Query.
We are facing problem as the added field is not getting displayed in the Query set so that we can select and display it in the Basic List along with the other filds.
Kindly suggest a solution.
Full points will be rewarded.
Thanks in Advance
Kumar

Hi Salman,
Thank you for your valuable information. I haven't Configured Dynamic Actions yet. Is it simple to write the Logic for Dynamic Actions. Is this the only way to solve this Issue?
I tried by adding the standard fields, but they are not populating the values; but just appearing as Input Fields with Input help option.
Please let me know if you have any suggestion in this direction?
Regards,
Hems.

Error message in WebGUI after adding fields with EEWB - Class doesn't exist

Hello!
After adding fields to the component BT111H_OPPT within EEWB and BSP_WD_CMPWB I recieved an error message while trying to open an Opportunity in the WebGUI, stating:
Cannot display view MainWindow
An exception has occured
Exception Class CX_SY_DYN_ILLEGAL_CLASS - Method call of IF_BSP_WD_DYN_RT_REP_SUPPORT~GET_URL_PARAMETERS failed; the class ZL_BT111H_O_BSPWDCOMPONEN_IMPL does not exist
Method: CL_BSP_WD_COMPONENT_FACTORY=>GET_REPOSITORY_XML
Source text Row:25
An exception occured during the activation of target view CUBTOpptOverview.MainWindow for the navigation
An exception has occured
Exceptions Class CX_BSP_WD_RUNTIME_ERROR - View CUBTOpptOverview.MainWindow could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source text Row:162
Has any one an idea, if this could be a bug or what went wrong? I am especially irritated, that it seems, that class was not created. After all I never changed any tables or anything in the background manually. I just used the standard tool EEWB, nothing else.
Many thanks for any kind of help!
By the way, I tried to go back all the steps I took previously to, kind of "un-do" my error, but I was not able to delete all created extensions, due to a another error - but that's a different story, or isn't it?
Cheers,
Marek

Hello Experts,
I know my question was a tricky one and no-one was able to help me from this forum. That's why I would like to share with you the solution I just recieved from SAP:
Although all classes that were created whilst extending the component BT111H_OPPT were deleted, there still existed a seperate extension definition in ViewCluster BSPWDVC_CMP_EXT still persisted.
I wasn't aware of the fact, that I had to delete that too.
Note: in order to delete ViewCluster, use tx SM34
The problem ist now solved!
Cheers!
Marek

Problem in adding fields in ADRC

Similar Messages

Maybe you are looking for