Problem in importing idoc? help needed

Hi all,
I am trying the file-xi- idoc scenario.I have created logical system,port,pprofile, rfc destination( using XIAPPLUSER id and password) in respective
sap system.
In sap xi side, using transaction idx1, created rfc destination to sap system and created a port.
In i.repository, when i tried to import the idoc type, i am getting the error like 'unable to establish connection to R/3 system'. I have defined the receiver sap system in SLD asboth technical and as well as business sytem.
Any help???
Rgds,
SR.

Hello SR,
There could be various reasons ... one of them could be your definition in the Integration Repository. Check if you have given correct server address & Group name etc on the screen where you create NameSpace. Also check that the user has sufficient authorization in the SAP system from where you are importing the IDoc schema.
Let me know how it goes.
Regards,
Homiar.

Similar Messages

IDOC help needed

Hi Gurus,
I am new to IDOC and needed to learn about the same.Please tell me some good stuff book that help me out.
Is there any open project scenario that helps me in learning.
Regards,

Hi,
See this link
[ALE IDOC| http://www.riyaz.net/blog/beginners-guide-to-ale-and-idocs-a-step-by-step-approach/]

Problem in importing idoc

Hi Friends,
Im using XI 7.0 , While importing an idoc into a SWCV from connected R3 system i get the following error :
" Problem to reach R3 system "
Detailed error message says " Attempt to import the application component hierarchy failed " CAN_NOT_BUILD_AKH.
I checked that IDX1, rfc destinations etc . are all ok
Message server details were also correct.
Can you help.
regards
Prasenjit

Hi,
Make sure your user id has the proper authorizations as described in the following article on the XI/R3 boxes (if they are separate)
http://help.sap.com/saphelp_nw04/helpdata/en/2b/a48f3c685bc358e10000000a11405a/frameset.htm
Thanks.

Problem in importing idoc metadata

Hi all,
i have problem in loading metadata in idx2. idoc details are AFS/ORDERS05/ZADIORDCONF port: SAPAGS client 003 . i could see an idoc metadata with name ORDERS05 under the corresponding sap system (SAPAGS with client 003) but with out any extension.
now i tried to create another with idoc type : ORDERS05
Extension: ZADIORDCONF
and Source port:SAPAGS
it is giving error msg Extension ZADIORDCONF is not assigned to basic type OREDERS05.
wat could be the reason , please help to solve it
Thanks and Regards
Jhansi

Hi,
There is no need to add anything to idx2. You could delete the existing metadata from idx2 and reimport it.
In some cases even this would not work. In that case, you could refresh the entire metadata by running report IDX_RESET_METADATA. However, use this report only if the above option does not work, since this report will reset your entire metadata.
Thanks,
Bhavish
Reward points if comments helpful

Audio Problems in Adobe Presenter: Help Needed Urgently!!

I am using trial versions of Adobe Presenter 7 and Adobe Connect 8.
I created a presentation in in Powerpoint 2002 and published through Adobe Presenter to Adobe Connect Pro. This presentation has voice over recorded through the Adobe Presenter "record audio" option.
In Adobe Connect Pro, I created a meeting and shared the above mentioned presentation through the "Share Document" option in Connect Pro.
Now, when I play the presentation in this Adobe Connect Meeting, I am not getting any audio that was recorded in Adobe Presenter. Whereas if I play the published presentation directly it plays the recorded audio.
Can anyone help me on this?
1. Are there any settings to be done in Powerpoint or Adobe Presenter or Connect pro?
2. Is it the problem of Trial Account or something like that?
Please let me know the solution. Need to work on this ASAP!!!
Thanks in Advance,
Yogini

This is a weird one. If you created a prezo with audio and published it to AC (Adobe Connect) and everything worked fine on your desktop then it should work fine in AC i.e. there are no other settings required on AC's side, it should just play.
As I am typing this I thought of similar audio problems that we have experienced in the past. A big one would be where another user created a PPT on their laptops and handed it to us. When testing the audio did not work. Reason being is that not all the files were coppied over BUT I must accept that this is not your problem as it definately worked on your PC before you published it to AC.
Wait there is one setting in the publish settings. In the output options tick "Upload source presentation with assests", then tick audio.
I cannot think of anything else. There is a man called Heyward Drummond on the Adobe Connect General forum, who is a real master at answering queries like this. Why not post your query there and see if he comes up with an answer?

Problem in importing idoc structure into repository

Hi experts,
I am trying to import an IDOC structure (ORDRSP.ORDERS03) from an R/3 system into the repository. But I am getting the following error:
" **Ready for import**
Import started...
ORDRSP.ORDERS03:
+ com.sap.aii.ibrep.sbeans.upload.RemoteUploadException: IDoc Type ORDERS03 | urn:sap-com:document:sap:idoc:messages is already locked in another change list by user rajash
Import failed with 1 error
If i still continue, i see the idoc imported in the left hand pane, but when i double click it, i don't see the structure of the IDOC in the right hand pane.
Also, when i press the XSD/WSDL tabs, i get this message:
"Object IDoc Type ORDERS03 | urn:sap-com:document:sap:idoc:messages not found".
Can somebody guide me how to get around this issue?
Thanks and regards,
Ravi Kanth Talagana

Hi Ravi,
Go to user rajash 's change list and activate it. Also ask him to release the IDOC.
cheers,
Prashanth
P.S Please mark helpful answers

Iphone Freezing problem... HELP Needed!!!

Hi, i have an iphone running 1.0.2 (i havent upgraded my firmware yet, i know). But i am experiencing the following problem:
My phone freezes after 5-10 hours of usage. Once it does, i reset by holding home and sleep button, restarts, apple logo, but... it stays there forever, no booting sequence, nothing. non of the buttons are responsive.
So i restore the software to my firmware, by getting into restore mode to recognize my iphone in itunes. Do the complete restore.
Then i have tried both, sycning my last saved profile, and not syncing at all, and treating it like a new phone. my at&t account remains the same.
after doing all this troublesome activity, guess what? 5-10 hours later, same problem. any application freezes. whether im in springboard, maps, sms, or simply the lock screen (happens more often here), it just freezes, becomes unresponsive, and then i have to start all over again (if i have a computer nearby, otherwise, i have to wait 3-5 hours to get to my mac, loosing all my phone calls in the interim.
Is there a fix to that other than restoring to 1.1.1? i mean, i agree this should fix some of the problems, but my phone was working perfectly fine one week ago with the same firmware. How can that change?
ANY SORT OF HELP is greatly appreciated.
Thanks

You are going to need to upgrade the firmware. It sounds like you have done everything you can do as an end user. The next step is to call Apple.
The first thing they are going to tell you to do is update the firmware.
There is no way around it. Lets just hope you don't have a real reason to not upgrade...

Problem with printing - Please help, need to be able to print!!

I am having a bit of a nightmare trying to get printing to work in OS X Tiger and would really appreciate some feedback.
I need to connect 2 network printers. Have managed to install one of them with a driver on the Xerox website but when I go to print a page from Firefox I get the following appear on the first page (followed by several blank pages):
%!PS-Adobe-3.0
%RBINumCopies: 1
%%Pages: (atend)
%APLDSCEncoding: UTFS
%%Title:
I also get the same problem using a generic driver on either of the printers. If someone can tell me where I am going wrong I would really appreciate it!!

Postscript is the page description language that OS X printing is based on. A postscript printer is one that has a postscript interpreter built-in. Non-postscript printers use some other page description language, such as HP's PCL language.
The Workcentre uses PCL (postscript is a paid option). So does the PSC. You'll need a PCL "CUPS" driver. I'd install hpijs (a 3 part install) from:
http://www.linux-foundation.org/en/OpenPrinting/MacOSX/hpijs
For the PSC, I'd try the PSC 2175 driver,
for the Workcentre, try the HP Color LJ 5000 driver.
A guide for Windows printing:
http://www.ifelix.co.uk/tech/3015.html

Problem clonning dynamic pool, help needed

Hi, again I am having problems ...
I manage to successfully import a winxp vm and convert it to template,
I then went to the pool tab,created a new pool, added the template and
configured the cloning to automatic, min 1, max 3 machines (I am still in testing
mode)
the problem is that when the vdi is trying to clone the machines, this is
what I get:
     Cloning Desktop Dyn-pool-VM-01      Dyn-pool      11:41:18      11:42:33      Job Failed
the error:
Error cloning: No suitable hosts to start a desktop for Desktop Provider xvmhost.
the desktop provider seems to be ok:
xvmhost - Sun xVM VirtualBox Desktop Provider Summary
Status: OK
Pools: Dyn-pool
Hosts:
CPU Usage:2%
Total Memory:3.87 GB
Memory Usage:95%
Storage:
Number of Storages: 1
Total Capacity:75.30 GB
Usage:25%
the host appears enabled in the host tab, but when I go to the template, nothing
appears next the the host: parameter, is that ok?
General Information
Machine State: Powered Off
Desktop State:Template
User: -
Assignment Type: -
Guest Operating System
Operating System: Microsoft Windows XP
IP Address: -
Template: -
Desktop Provider Resources
Host:
Storage: inglaterra
ZFS Volume:rpool/edd4470e-e8eb-4e11-9ee1-f6fd2607c83b
what am I doing wrong or what am I missing? I did not find references to this
in the wiki page ... if there are, plz provide me with the link(s)
thanks in advance
-Oswaldo

this is the output from vmstat just before enabling the auto clone for the pool,
dont know if this is usefull....
root [ ~ ]# vmstat 5
kthr memory page disk faults cpu
r b w swap free re mf pi po fr de sr s0 s1 s2 s3 in sy cs us sy id
0 0 0 17438080 610716 2 20 0 0 0 0 1 -0 -0 0 2 617 549 358 0 0 100
0 0 0 17297396 384496 3 11 0 0 0 0 0 0 0 0 0 454 177 211 0 0 100
0 0 0 17297300 384460 0 0 0 0 0 0 0 0 0 0 0 470 144 219 0 0 100
0 0 0 17297268 384432 0 1 0 0 0 0 0 0 0 0 0 850 1859 1000 0 0 99
0 0 0 17297148 384312 0 0 0 0 0 0 0 0 0 0 0 709 1280 736 0 0 100
0 0 0 17297148 384312 0 0 0 0 0 0 0 0 0 0 2 503 169 265 0 0 100
0 0 0 17297132 384304 0 0 0 0 0 0 0 0 0 0 0 712 1272 736 0 0 100
0 0 0 17297132 384304 0 0 0 0 0 0 0 0 0 0 0 451 168 208 0 0 100
0 0 0 17297132 384296 0 0 0 0 0 0 0 0 0 0 0 831 1830 993 0 0 99
0 0 0 17297132 384296 0 0 0 0 0 0 0 0 0 0 0 470 165 216 0 0 100
0 0 0 17297120 384288 0 0 0 0 0 0 0 0 0 0 0 705 1290 735 0 0 100
0 0 0 17297116 384288 0 0 0 0 0 0 0 0 0 0 2 503 166 263 0 0 100
0 0 0 17297116 384284 0 0 0 0 0 0 0 0 0 0 0 845 1843 1010 0 0 99
0 0 0 17297116 384280 0 0 0 0 0 0 0 0 0 0 0 451 168 208 0 0 100
0 0 0 17297116 384280 0 0 0 0 0 0 0 0 0 0 0 471 145 220 0 0 100
0 0 0 17297100 384268 0 1 0 0 0 0 0 0 0 0 0 712 1295 737 0 0 100
0 0 0 17297100 384260 0 0 0 0 0 0 0 0 0 0 0 573 716 470 0 0 100
0 0 0 17297100 384260 0 0 0 0 0 0 0 0 0 0 2 503 165 263 0 0 100
kthr memory page disk faults cpu
r b w swap free re mf pi po fr de sr s0 s1 s2 s3 in sy cs us sy id
0 0 0 17297100 384260 0 0 0 0 0 0 0 0 0 0 0 467 144 214 0 0 100
0 0 0 17297100 384260 0 0 0 0 0 0 0 0 0 0 0 451 235 243 0 0 100
0 0 0 17297100 384260 9 79 0 0 0 0 0 0 0 0 0 591 734 481 0 0 100
0 0 0 17295868 384140 0 27 0 0 0 0 0 0 0 0 0 1013 2667 1377 0 0 99
0 0 0 17295048 384064 0 0 0 0 0 0 0 0 0 0 0 450 151 206 0 0 100
0 0 0 17295044 384060 0 0 0 0 0 0 0 0 0 0 2 746 1297 784 0 0 100
0 0 0 17295032 384052 0 0 0 0 0 0 0 0 0 0 0 595 711 478 0 0 100
0 0 0 17295032 384048 0 0 0 0 0 0 0 0 0 0 0 699 1296 736 0 0 100
0 0 0 17295032 384048 0 0 0 0 0 0 0 0 0 0 0 472 145 221 0 0 100
0 0 0 17295032 384048 0 0 0 0 0 0 0 0 0 0 0 469 174 217 0 0 100
0 0 0 17294844 383796 0 44 0 0 0 0 0 0 0 0 0 848 1855 1007 0 0 99
0 0 0 17294796 383732 0 0 0 0 0 0 0 0 0 0 2 502 168 262 0 0 100
0 0 0 17294796 383728 0 1 0 0 0 0 0 0 0 0 0 715 1273 738 0 0 100
0 0 0 17294784 383716 0 0 0 0 0 0 0 0 0 0 0 451 169 209 0 0 100
and this is the status while cloning:
Hosts:
CPU Usage:1%
Total Memory:3.87 GB
Memory Usage:90%
root [ ~ ]# prtdiag -v|head -20
System Configuration: Sun Microsystems Sun Fire X4200 Server
BIOS Configuration: American Megatrends Inc. 080010 01/31/2006
BMC Configuration: IPMI 2.0 (KCS: Keyboard Controller Style)
==== Processor Sockets ====================================
Version Location Tag
Dual Core AMD Opteron(tm) Processor 280 SE H0
Dual Core AMD Opteron(tm) Processor 280 SE H1
Dual Core AMD Opteron(tm) Processor 280 SE H2
Dual Core AMD Opteron(tm) Processor 280 SE H3
==== Memory Device Sockets ================================
Type Status Set Device Locator Bank Locator
DDR in use 0 H0_DIMM0 BANK0
DDR in use 0 H0_DIMM1 BANK1
unknown empty 0 H0_DIMM2 BANK2

Having problem with trigger.(help needed)

HI all,
i m totally new to the PL/SQL.... hope someone can help me with this.....
i am now using trigger to block inserting into "attendance99" table when the record reach the maximum limit and insert the record to the "waiting_list" table.
The problem i face is by using RAISE_APPLICATION_ERROR, it will block the insertion to the "waiting_list" table as well.....
i had try to use only DBMS_OUTPUT.PUT_LINE instead but end up >>> inserting record into both table "attendance" and "waiting_list" tables.
CREATE OR REPLACE TRIGGER trig_attendance
Before insert on attendance99
referencing new as new
for each row
DECLARE
maxstud NUMBER(2);
currstud NUMBER(2);
Begin
SELECT COUNT(*) INTO currstud FROM attendance99 WHERE offering_id=:New.offering_id;
SELECT max_no_students INTO maxstud FROM offering WHERE offering_id=:New.offering_id;
IF currstud >= maxstud
THEN
insert_waitinglist(:New.offering_id, :New.student_id, :New.evaluation, :New.amount_paid);
RAISE_APPLICATION_ERROR (-20500, 'Sorry, this Offering ID has reach maximum students, you will be placed into waiting list!');
END IF;
END;
CREATE OR REPLACE PROCEDURE insert_waitinglist
(v_offeringid IN waiting_list.offering_id%TYPE,
v_studentid IN waiting_list.student_id%TYPE,
v_evaluation IN waiting_list.evaluation%TYPE,
v_amountpaid IN waiting_list.amount_paid%TYPE)
IS
BEGIN
     INSERT INTO waiting_list (offering_id, student_id, evaluation, amount_paid)
VALUES (v_offeringid, v_studentid, v_evaluation, v_amountpaid);
END insert_waitinglist;
-----------------------------------------------

SQL> create table a (x number);
Table created.
SQL> create table b (x number);
Table created.
SQL> ed
Wrote file afiedt.buf
1 create or replace procedure insert_b(x in number) is
2    pragma autonomous_transaction;
3 begin
4    insert into b values (x);
5    commit;
6* end;
SQL> /
Procedure created.
SQL> ed
Wrote file afiedt.buf
1 create or replace trigger trig_a
2 before insert on a
3 for each row
4 declare
5    v_cnt NUMBER;
6 begin
7    select count(*) into v_cnt from a;
8    if v_cnt >= 5 then
9      insert_b(:new.x);
10      raise_application_error(-20500, 'Limit exceeed. Inserted to B instead');
11    end if;
12* end;
13 /
Trigger created.
SQL> insert into a values (1);
1 row created.
SQL> insert into a values (2);
1 row created.
SQL> insert into a values (3);
1 row created.
SQL> insert into a values (4);
1 row created.
SQL> insert into a values (5);
1 row created.
SQL> insert into a values (6);
insert into a values (6)
ERROR at line 1:
ORA-20500: Limit exceeed. Inserted to B instead
ORA-06512: at "SCOTT.TRIG_A", line 7
ORA-04088: error during execution of trigger 'SCOTT.TRIG_A'
SQL> select * from a;
         X
         1
         2
         3
         4
         5
SQL> select * from b;
         X
         6
SQL>

ALE/IDOCS Help Needed

Hi Friends!
I am preparing for my interview can any one please tell me what type of work i ve to say on ALE/ IDOCS in interview.
I ve worked extensively on reports bdc scrips onley can u pls help me in this regard.
U can personally reach me to [email protected]
Looking for your Help Friends
Thanking you All for your Answers in Advance.
Lekha.

ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html

Problem with jasper. Help needed urgently!

Hi everybody. I'm trying to run jasper reports in a new web applicattion i've done. The problem is that the jasper runs perfectly in my pc i've developed the apllicattion but it doesn't work in the server. The error message that I show is:
[Error de servlet]-[net/sf/jasperreports/engine/fill/JRVerticalFiller]: java.lang.NoClassDefFoundError: net/sf/jasperreports/engine/fill/JRVerticalFiller
java/lang/Throwable.<init>(Ljava/lang/String;)V+4 (Throwable.java:85)
java/lang/Error.<init>(Ljava/lang/String;)V+1 (Error.java:41)
java/lang/NoClassDefFoundError.<init>(Ljava/lang/String;)V+1 (NoClassDefFoundError.java:38)
net/sf/jasperreports/engine/fill/JRFiller.createFiller(Lnet/sf/jasperreports/engine/JasperReport;)Lnet/sf/jasperreports/engine/fill/JRBaseFiller;+44 (JRFiller.java:147)
net/sf/jasperreports/engine/fill/JRFiller.fillReport(Lnet/sf/jasperreports/engine/JasperReport;Ljava/util/Map;Ljava/sql/Connection;)Lnet/sf/jasperreports/engine/JasperPrint;+1 (JRFiller.java:57)
net/sf/jasperreports/engine/JasperFillManager.fillReport(Lnet/sf/jasperreports/engine/JasperReport;Ljava/util/Map;Ljava/sql/Connection;)Lnet/sf/jasperreports/engine/JasperPrint;+3 (JasperFillManager.java:402)
org/apache/jsp/_listado_5F_jasper._jspService(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;)V+503 (_listado_5F_jasper.java:173)
com/ibm/ws/webcontainer/jsp/runtime/HttpJspBase.service(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;)V+0 (HttpJspBase.java:89)
javax/servlet/http/HttpServlet.service(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;)V+0 (HttpServlet.java:848)
com/ibm/ws/webcontainer/jsp/servlet/JspServlet$JspServletWrapper.service(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;Z)V+225 (JspServlet.java:396)
com/ibm/ws/webcontainer/jsp/servlet/JspServlet.serviceJspFile(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;Ljava/lang/String;Ljava/lang/Throwable;ZLjava/lang/String;)V+97 (JspServlet.java:880)
com/ibm/ws/webcontainer/jsp/servlet/JspServlet.service(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;)V+352 (JspServlet.java:978)
javax/servlet/http/HttpServlet.service(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;)V+0 (HttpServlet.java:848)
com/ibm/ws/webcontainer/servlet/StrictServletInstance.doService(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;)V+0 (StrictServletInstance.java:105)
com/ibm/ws/webcontainer/servlet/StrictLifecycleServlet._service(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;)V+0 (StrictLifecycleServlet.java:160)
com/ibm/ws/webcontainer/servlet/IdleServletState.service(Lcom/ibm/ws/webcontainer/servlet/StrictLifecycleServlet;Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;)V+0 (StrictLifecycleServlet.java:313)
com/ibm/ws/webcontainer/servlet/StrictLifecycleServlet.service(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;)V+0 (StrictLifecycleServlet.java:116)
com/ibm/ws/webcontainer/servlet/ServletInstance.service(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;Lcom/ibm/ws/webcontainer/webapp/WebAppServletInvocationEvent;)V+0 (ServletInstance.java:250)
com/ibm/ws/webcontainer/servlet/ValidServletReferenceState.dispatch(Lcom/ibm/ws/webcontainer/servlet/ServletInstanceReference;Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;Lcom/ibm/ws/webcontainer/webapp/WebAppServletInvocationEvent;)V+0 (ValidServletReferenceState.java:42)
com/ibm/ws/webcontainer/servlet/ServletInstanceReference.dispatch(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;Lcom/ibm/ws/webcontainer/webapp/WebAppServletInvocationEvent;)V+0 (ServletInstanceReference.java:40)
com/ibm/ws/webcontainer/webapp/WebAppRequestDispatcher.handleWebAppDispatch(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;)V+0 (WebAppRequestDispatcher.java:936)
com/ibm/ws/webcontainer/webapp/WebAppRequestDispatcher.dispatch(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;Z)V+0 (WebAppRequestDispatcher.java:268)
com/ibm/ws/webcontainer/webapp/WebAppRequestDispatcher.forward(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;)V+0 (WebAppRequestDispatcher.java:155)
org/apache/struts/action/RequestProcessor.doForward(Ljava/lang/String;Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;)V+0 (RequestProcessor.java:1058)
org/apache/struts/action/RequestProcessor.processForwardConfig(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;Lorg/apache/struts/config/ForwardConfig;)V+0 (RequestProcessor.java:428)
org/apache/struts/action/RequestProcessor.process(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;)V+0 (RequestProcessor.java:217)
org/apache/struts/action/ActionServlet.process(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;)V+0 (ActionServlet.java:1481)
org/apache/struts/action/ActionServlet.doPost(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;)V+0 (ActionServlet.java:525)
javax/servlet/http/HttpServlet.service(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;)V+0 (HttpServlet.java:733)
javax/servlet/http/HttpServlet.service(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;)V+0 (HttpServlet.java:848)
com/ibm/ws/webcontainer/servlet/StrictServletInstance.doService(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;)V+0 (StrictServletInstance.java:105)
com/ibm/ws/webcontainer/servlet/StrictLifecycleServlet._service(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;)V+0 (StrictLifecycleServlet.java:160)
com/ibm/ws/webcontainer/servlet/IdleServletState.service(Lcom/ibm/ws/webcontainer/servlet/StrictLifecycleServlet;Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;)V+0 (StrictLifecycleServlet.java:313)
com/ibm/ws/webcontainer/servlet/StrictLifecycleServlet.service(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;)V+0 (StrictLifecycleServlet.java:116)
com/ibm/ws/webcontainer/servlet/ServletInstance.service(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;Lcom/ibm/ws/webcontainer/webapp/WebAppServletInvocationEvent;)V+0 (ServletInstance.java:250)
com/ibm/ws/webcontainer/servlet/ValidServletReferenceState.dispatch(Lcom/ibm/ws/webcontainer/servlet/ServletInstanceReference;Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;Lcom/ibm/ws/webcontainer/webapp/WebAppServletInvocationEvent;)V+0 (ValidServletReferenceState.java:42)
com/ibm/ws/webcontainer/servlet/ServletInstanceReference.dispatch(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;Lcom/ibm/ws/webcontainer/webapp/WebAppServletInvocationEvent;)V+0 (ServletInstanceReference.java:40)
com/ibm/ws/webcontainer/webapp/WebAppRequestDispatcher.handleWebAppDispatch(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;)V+0 (WebAppRequestDispatcher.java:936)
com/ibm/ws/webcontainer/webapp/WebAppRequestDispatcher.dispatch(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;Z)V+0 (WebAppRequestDispatcher.java:268)
com/ibm/ws/webcontainer/webapp/WebAppRequestDispatcher.forward(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;)V+0 (WebAppRequestDispatcher.java:155)
com/ibm/ws/webcontainer/srt/WebAppInvoker.doForward(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;)V+0 (WebAppInvoker.java:79)
com/ibm/ws/webcontainer/srt/WebAppInvoker.handleInvocationHook(Ljava/lang/Object;)V+0 (WebAppInvoker.java:159)
com/ibm/ws/webcontainer/cache/invocation/CachedInvocation.handleInvocation(Ljava/lang/Object;)V+0 (CachedInvocation.java:66)
com/ibm/ws/webcontainer/srp/ServletRequestProcessor.dispatchByURI(Ljava/lang/String;Lcom/ibm/ws/webcontainer/srp/ISRPConnection;)V+0 (ServletRequestProcessor.java:126)
com/ibm/ws/webcontainer/oselistener/OSEListenerDispatcher.service(Lcom/ibm/ws/webcontainer/oselistener/api/IOSEConnection;)V+0 (OSEListener.java:317)
com/ibm/ws/webcontainer/http/HttpConnection.handleRequest()V+0 (HttpConnection.java:56)
com/ibm/ws/http/HttpConnection.readAndHandleRequest(Z)V+0 (HttpConnection.java:575)
com/ibm/ws/http/HttpConnection.run()V+0 (HttpConnection.java:375)
com/ibm/ws/util/ThreadPool$Worker.run()V+0 (ThreadPool.java:654)
I'm running the applicattion with jasperreports1.2.2.jar and the other needed libraries as it's explained in sourceforge.
Should I have missed any .jar? What's the problem? Why the applicattion runs perfectly in my pc but doesn't run in the server?

Yes, because if i hadn't put each and every library required in WEBINF/lib it hadn't work in my pc. There is something in the server different but i don't know what it is. The ear file i export contains the libraries required in the places that they're needed.

Idocs Help Needed!

Hi Guys!
    I want to learn idocs programming in Inbound & Outbound
   <b>Inbound in the sense how data read & put into idocs
   Idocs Processing
Outbound-> Custom FM to Process data to Application
</b>
Can any one having any good material to prepare so
<b> I want step by step in detail screen schots with real time example.</b>
Points Awarded, Sure Thanks for your reply.
Rahul.
[email protected]

Hi,
lease check this online document for ALE and IDoc.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
Also check this links for additional information.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
Regards,
Sankar

Serious Problem...Urgent Help needed

Hello,
     I am facing a problem problem and it seems that it is more related to the parameters we pass to oracle ias server. There is some attribute to be set in deployment descriptor (orion-ejb-jar.xml file) i suppose.
The process is as below:
There are 2 cases i.e.,
1. Insert & Select
2. Select
In case 1, following are the operations taking place :
     1. A set of rows will be inserted in the A table
     2. The same will be refered and inserted into child tables.
     3. Then from other beans, many select queries from different tables
     are executed.
     4. And finally, the newly inserted row from table A will be selected.
During the point 4 execution, the server throws
     java.lang.IllegalStateException: TransactionExpired : java.lang.NullPointerException
In case 2, following are the operations taking place :
     In this case, server executes only point 3 & 4( see in case 1). In this case, the exception is not thrown.
It selects all the requested data and works fine.
I am wondering why this problem arises in case 1. The full details of Transaction Expired exception
is as follows :
java.lang.IllegalStateException: Transaction expired: java.lang.NullPointerException
     at com.evermind.server.ApplicationServerTransaction.checkStatus(ApplicationServerTransaction.java:203)
     at com.evermind.server.ApplicationServerTransaction.enlistResource(ApplicationServerTransaction.java:129)
     at com.evermind.server.ApplicationServerTransaction.enlistResource(ApplicationServerTransaction.java:124)
     at com.evermind.sql.OrionCMTConnection.intercept(OrionCMTConnection.java:81)
     at com.evermind.sql.FilterConnection.prepareStatement(FilterConnection.java:240)
     at com.gpt.io.dxfimport.entity.parse.SelectObject.retrieveDXFObjects(SelectObject.java:86)
     at com.gpt.io.dxfimport.entity.parse.ParsedDataBean.ejbLoad(ParsedDataBean.java:224)
     at ParsedData_EntityBeanWrapper8.loadState(ParsedData_EntityBeanWrapper8.java:638)
     at com.evermind.server.ejb.EntityEJBObject.endTransaction(EntityEJBObject.java:107)
     at com.evermind.server.ApplicationServerTransactionSynchronization.freeResources(ApplicationServerTransactionSynchronization.java:87)
     at com.evermind.server.ApplicationServerTransaction.freeResources(ApplicationServerTransaction.java:798)
     at com.evermind.server.ApplicationServerTransactionSynchronization.afterCompletion(ApplicationServerTransactionSynchronization.java:533)
     at com.evermind.server.ApplicationServerTransaction.rollback(ApplicationServerTransaction.java:348)
     at com.evermind.server.ApplicationServerTransaction.end(ApplicationServerTransaction.java:539)
     at UserInfo_StatefulSessionBeanWrapper16.getDXFData(UserInfo_StatefulSessionBeanWrapper16.java:6610)
     at java.lang.reflect.Method.invoke(Native Method)
     at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:66)
     at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:62)
Normally in case 1, transaction would take at the max of 2 min. Though i have changed the data-sources.xml and server.xml timeouts to 10 min...i am facing the same problem.
Another information which i required is, How to utilize connection pooling using ejb's? If possible, Please give me the required paramaters for data-source.xml in order to utilise the connection pool...
I have read in many sites, that giving pool-location in data-source.xml, the data-sources will be registered in the pool. I tried out the same, the pooling was not utilised...Below is my data-sources.xml file contents:
     <data-source
          class="oracle.jdbc.pool.OracleConnectionCacheImpl"
          name="GPTPool"
          location="GPTPool"
          pooled-location="jdbc/GPTPool"
          xa-location="jdbc/xa/GPTPool"
          ejb-location="jdbc/GPTPool"
          min-connections="5"
          max-connections="49"
          connection-driver="oracle.jdbc.driver.OracleDriver"
          url="jdbc:oracle:thin:@10.10.11.46:1521:FMS"
          inactivity-timeout="60000"
          wait-timeout="6000"
     />
With the above given settings, OC4J throws a error message i.e., java.sql.SQLException: ORA-00020: maximum number of processes (50) exceeded
Above exception is thrown during getConnection().
If i increase the inactivity-time-out then, i can use connections for some more time. I didnt understand the flow of it...
Please let me know as how to utilise connection pooling so that it may solve ORA-000020 problem.
Waiting for your early response.
Thanx & Regards,
Achyuth

Achyuth,
The error is coming from Oracle DB. Please ask your DBA to increase the processes to a higher value in the init.ora.
regards
Debu

Problems with import, please help!

I have tried importing two different CD's and they are importing with presets. How do I turn this off?

I am importing .tif files. An aged preset is being applied. I see where it says presets to apply when importing and "none" is selected. I have uploaded over a thousand images in the last few weeks and these are the first two CD's that have started doing this?

Problem in importing idoc? help needed

Similar Messages

Maybe you are looking for