Problem in moving transport request

Hi,
While performing transports at OS level, we are facing some error.
below is the log. Please look into this issue.
We have already trigged manually RDDNEWPP and
SAP_TRIGGER_RDDIMPDP from client 000
>tp import pf=TP_DOMAIN_FD3.PFL FD3K915202 FT3 CLIENT=010 U01268
This is tp version 372.04.08 (release 700, unicode enabled)
Warning: Parameter DBLIBPATH is no longer used.
ERROR: The following call returned with exit code 236:
ERROR: sapevt SAP_TRIGGER_RDDIMPDP -t name=FT3
ERROR: Background jobs cannot be started.
ERROR: Please check trace file dev_evt.
We have also manually triggerred RDDIMPDP via sapevt from OS level. But issue still persist.
There is no error in Import log and import history. But we are getting the below error in slog.
WARNING: System FT3. Warning.        20090602114617 :
ERROR:       The following call returned with exit code 236:
ERROR:         sapevt SAP_TRIGGER_RDDIMPDP -t name=FT3
ERROR:       Background jobs cannot be started.
ERROR:       Please check trace file dev_evt.
WARNING:       (This warning is harmless if no further warnings follow.)
The error in dev_evt is as follows:
Tue Jun 2 09:51:58 2009
Trace File of External Event Raiser (Level=2, Append=0)
EventID: SAP_TRIGGER_RDDIMPDP
ERROR ***: Cannot determine mshost
Please suggest..................
Thanks,
Sourav Misra

I have resolved the problem........
As per SAP note 821875 point 2(Security settings in the message server), MSEACCESSDENIED (or rc= -20) errors message can occur if the parameter rdisp/msserv_internal is not defined with 0 value
We have removed rdisp/msserv_internal from instance profile, and add it again in the DEFAULT profile with 0 value. Remember that, after this, it's important to check that the value has been correctly   changed in the correct file DEFAULT.PFL
After this, we have restarted the instance.
I have attached also the following SAP note for information:
826779 - sapevt (Version 5): Security settings in the Msg.g.
                        Please maintain the RDDIMPDP in all clients with user
                        DDIC in accordanceof note 11677. Goto SE38, use RDDNEWPP
                        to schedule RDDIMPDP on client
                        000 and other client with DDIC user.
Thanks,
Sourav Misra
IBM

Similar Messages

PROBLEM IN RELEASING TRANSPORT REQUEST THROUGH SE10

Dear all,
I am trying to release transport request of development server via. transaction se10.Now my problem is that the child(DEVELOPMENT/CORRECTION) is getting released while the parent request is not getting released.
I checked everything and its showing 'test call of transport control program ended with return code 0208.' I even checked overview of system,overview of connection type,over view of transport protocol and they are fine.my only doubt is after going to se10 when I click transport proposals its showing "WORK FLOW NOT ACTIVE' .
Is my problem is because of this. Please help its very urgent as due to this I am not even able to transport any request on production server.
Helpful contribution will be duly rewarded.
Thanks & Regards,
VICKY

hi
vicky just went through your Query regarding release
of requests..first of all U be sure of TMS configuration
see whether it is consistent or not.then after Refresh
the system and then come to release of requests.
its true that we can transport through scc1 but first
check about STMS configuration and the way you set
that.
Regards
manjula.

Problem with the transport request

A request was released to Prod.
In D and Q the request is success but in P it shows one error..
so, we tried to create a new request and copy the objects from the old one.
but v r gettiing the objects not below the task(in req) but below the req..
so it is not possible for me to release it.
I also tried to edit the code , but when i saved it it is not asking for a new request. is it bcoz old req is released to P?

Hi,
In production system, it is showing an error in the logs while transporting : Generation of Programs and Screen and return an error code 8. there are no repositary objects to transport. this is just simple code modification. In Quality and Dev system, transportation was done successfully with out causing any problem.
So, we tried to create a new transport request by editing the code in development.however it is not asking for the new transport request number while saving or activating.
Also, we tried to create a new TR manually using SE09 and placing the modified objects under the task. but, transport request and task number are getting created at a time and while assigning the objects, the objects are under the request not under the task.the objects should be under the task only.
this is the problem what exactly we are getting. Please clarify..
Thansk!!!

Problem with "Create Transport Request"

Hi all,
Iu2019m working with Solution Manager and Charm. I have a problem when I create a transport request.
After that I put regular correction into status u201CIn developmentu201D I choose u201CCreate Transport Requestu201D from the menu but the system display the message u201CThe last action triggered is locked in the task listu201D . Is it a problem of authorization in satellite system? The user that I use to create a transport request have sap_all profile in the satellite system. What settings do I have to use in satellite system and in solution manager?
Thank in advance
giovanni

Make sure that the profile S_TMW_IMPORT and S_TMW_CREATE has the correction authorizations assigned and that it is assigned to the user TMSADM of client 000 of your satellite system.
Note 807228 can be useful.
Hope this helps,
Roel

Looking to confirm the successfully MOVED Transport Requests & their order

Hi,
I have manually ordered about 20 requests which were successfully transported from Dev to Quality; After 6 months of testing, I now need to move them to production.
Is there a way to know these objects which were successfully moved by Basis to Quality in the order in which they were moved (Those days there were a number of them which failed and had to be fixed released again on Dev, etc. so it has become a bit confusing)
Thanks

Hi,
Thanks for the input but I already checked se09 in DEV and it gives which transport requests I released.
But note that it is not request that I released that got moved to Quality.
Also, even for those which were moved, under Released, it only gives me the ORDER in which I released the requests and not the order in which Basis MOVED the physical objects to Quality
Finally, you said to
"...make sure all are transported in QA already to keep in sync ..."
what did you mean by "in sync"?
Thanks

Query regarding moving transport request

HI all,
I have query regarding moving the transport request.
I have a main program with 3 includes. I have made some changes in the 1st include and transported it to the quality(testing). Now i made changes in the 2nd include and saved it in a different request(as request for the 1st include is already released). Now i am moving the changes of the 2nd include into the production. Here I want to know whether all the changes that i have made for the 1st include also will reflect in the production when the 2nd request is moved to production( incase of 1st include, only moved till quality) or only the changes made in the 2nd include will only reflect.
Kindly clarify as soon as possible.
Best regards
John

Hi,
Thank you very much for the response. I have a query regarding the same. If i am making changes only in one single report and i am moving it to the quality. Now again i am making changes in the same report and saving it in a different request and moving it to the production. in this case, i wanted to know whether the whole changes made in the first and second request will reflect in the production or only the 2nd request's change will only reflect (since it is only a single report. there is no include in the program)
Kindly send ur suggestions.
Best regards,
John

Problem while Importing Transport Request

Hi Friends
We are trying to import a transport request, while importing abap dictionary objects, in the log it is showing not imported. we have tried the same request in other system, but it works fine there. Can you please anyone explain what may be the cause behind for this.
Regards
Praveen

Hi
Please find the log.
EXCLUDING        : 'R3TRVIEW','R3TRUENO','R3TRTTYP','R3TRTABL','R3TRSQLT','R3TRSHLP','R3TRMCOB','R3TRMCID','R3TRMACO','R3TRENQU','R
Data file is compressed with algorithm 'L'.
Export was executed on 25.07.2008 at 15:27:15 by unknown
620
with R3trans version: 26.02.07 - 15:37:00
Source System = PC with Windows NT on DBMS = MSSQL --- SERVER = 'ADAPSAPDEV' DBNAME = 'BI1' --- SYSTEM = 'BI1'.
language vector during export: ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789abcdefghijklmnopqrstuvwxyz(),./:;
lsm during export: VECTOR
trfunction = K (transport to consolidation system)
Used Commandfile BI1K900524           (DEVELOPER1/125)
Target client in E070C updated (100)
0 entries for E070 imported (BI1K900524).
0 entries for E071 imported (BI1K900524          *).
     table TADIR: entry in DB is 2 bytes bigger than in file.
     ... ignoring such differences.
26 26
     table DD01L: entry in DB is 32 bytes bigger than in file.
     ... ignoring such differences.
     table DD07L: entry in DB is 1 byte bigger than in file.
     ... ignoring such differences.
LIMUDOMDZZSMBI_TESTSTATUS was not imported in this step
     table DD04L: entry in DB is 2 bytes bigger than in file.
     ... ignoring such differences.
LIMUDTEDZZMSBI_ABAPVERSION was not imported in this step
LIMUDTEDZZMSBI_BUGID was not imported in this step
LIMUDTEDZZMSBI_CODELINE was not imported in this step
LIMUDTEDZZMSBI_CONVEXIT was not imported in this step
LIMUDTEDZZMSBI_COUNT was not imported in this step
LIMUDTEDZZMSBI_DATAROW was not imported in this step
LIMUDTEDZZMSBI_DATATYPE was not imported in this step
LIMUDTEDZZMSBI_DATEFORMAT was not imported in this step
LIMUDTEDZZMSBI_DECIMALPOINT was not imported in this step
LIMUDTEDZZMSBI_DELIMITER was not imported in this step
LIMUDTEDZZMSBI_DESCRIPTION was not imported in this step
LIMUDTEDZZMSBI_FILENAME was not imported in this step
LIMUDTEDZZMSBI_FLAG was not imported in this step
LIMUDTEDZZMSBI_FUNCNAME was not imported in this step
LIMUDTEDZZMSBI_INDEX was not imported in this step
LIMUDTEDZZMSBI_INTTYPE was not imported in this step
LIMUDTEDZZMSBI_LANG was not imported in this step
LIMUDTEDZZMSBI_LANGUAGE was not imported in this step
LIMUDTEDZZMSBI_MODE was not imported in this step
LIMUDTEDZZMSBI_MSGCLASS was not imported in this step
LIMUDTEDZZMSBI_MSGDATE was not imported in this step
LIMUDTEDZZMSBI_MSGID was not imported in this step
LIMUDTEDZZMSBI_MSGTEXT was not imported in this step
LIMUDTEDZZMSBI_MSGTIME was not imported in this step
LIMUDTEDZZMSBI_MSGVAR was not imported in this step
LIMUDTEDZZMSBI_NEG_ON_RIGHT was not imported in this step
LIMUDTEDZZMSBI_OBJNAME was not imported in this step
LIMUDTEDZZMSBI_OPTION was not imported in this step
LIMUDTEDZZMSBI_OUTPUTLEN was not imported in this step
LIMUDTEDZZMSBI_SEVERITY was not imported in this step
LIMUDTEDZZMSBI_SHORTCOUNT was not imported in this step
LIMUDTEDZZMSBI_SIGN was not imported in this step
LIMUDTEDZZMSBI_TABLECLASS was not imported in this step
LIMUDTEDZZMSBI_TAGNAME was not imported in this step
LIMUDTEDZZMSBI_TAGTYPE was not imported in this step
LIMUDTEDZZMSBI_TESTID was not imported in this step
LIMUDTEDZZMSBI_TESTOBJNAME was not imported in this step
LIMUDTEDZZMSBI_TESTSTATUS was not imported in this step
LIMUDTEDZZMSBI_VAR was not imported in this step
LIMUDTEDZZMSBI_VIEWCLASS was not imported in this step
LIMUDTEDZZMSBI_WHERESTRING was not imported in this step
LIMUDTEDZZMSBI_WHERE_LINE_46C was not imported in this step
LIMUDTEDZZMSBI_WHERE_OPERATOR was not imported in this step
LIMUDTEDZZMSBI_WHERE_VALUE was not imported in this step
Start import LIMUREPSZZMSBI_EXTRACTCODE_TEMPLATE ...
1 entry for TADIR updated (R3TRPROGZZMSBI_EXTRACTCODE_TEMPLATE             ).
0 entries from SMODILOG (PROGZZMSBI_EXTRACTCODE_TEMPLATE             REPSZZMSBI_EXTRACTCODE_TEMPLATE
0 entries from SMODISRC (CVPROGZZMSBI_EXTRACTCODE_TEMPLATE             REPSZZMSBI_EXTRACTCODE_TEMPLATE
0 entries from SMODISRC (CUPROGZZMSBI_EXTRACTCODE_TEMPLATE             REPSZZMSBI_EXTRACTCODE_TEMPLATE
0 entries from SMODISRC (PRPROGZZMSBI_EXTRACTCODE_TEMPLATE             REPSZZMSBI_EXTRACTCODE_TEMPLATE
0 entries from SMODISRC (SVPROGZZMSBI_EXTRACTCODE_TEMPLATE             REPSZZMSBI_EXTRACTCODE_TEMPLATE
0 entries from SMODISRC (CIPROGZZMSBI_EXTRACTCODE_TEMPLATE             REPSZZMSBI_EXTRACTCODE_TEMPLATE
REPOS ZZMSBI_EXTRACTCODE_TEMPLATE              A replaced.
report ZZMSBI_EXTRACTCODE_TEMPLATE              (L) synchronized.
169736 169762
1 entry for TRDIRT updated (ZZMSBI_EXTRACTCODE_TEMPLATE             *).
End of import LIMUREPSZZMSBI_EXTRACTCODE_TEMPLATE
     table DD03L: entry in DB is 4 bytes bigger than in file.
     ... ignoring such differences.
LIMUTABDZZMSBI_ABAPCODE was not imported in this step
LIMUTABDZZMSBI_CONVERSION_FIELDS was not imported in this step
LIMUTABDZZMSBI_CONVERSION_METADATA was not imported in this step
LIMUTABDZZMSBI_DATAOBJECT was not imported in this step
LIMUTABDZZMSBI_DATATABLE was not imported in this step
LIMUTABDZZMSBI_DD02V was not imported in this step
LIMUTABDZZMSBI_DD03P was not imported in this step
LIMUTABDZZMSBI_DD05M was not imported in this step
LIMUTABDZZMSBI_DD08V was not imported in this step
LIMUTABDZZMSBI_DD09L was not imported in this step
LIMUTABDZZMSBI_DD12V was not imported in this step
LIMUTABDZZMSBI_DD17V was not imported in this step
LIMUTABDZZMSBI_DD26V was not imported in this step
LIMUTABDZZMSBI_DD27P was not imported in this step
LIMUTABDZZMSBI_DD28J was not imported in this step
LIMUTABDZZMSBI_DD28V was not imported in this step
LIMUTABDZZMSBI_FIELDS was not imported in this step
LIMUTABDZZMSBI_JOINCONDITION was not imported in this step
LIMUTABDZZMSBI_KEYFIELDS was not imported in this step
LIMUTABDZZMSBI_LOGMESSAGE was not imported in this step
LIMUTABDZZMSBI_RANGE_CONVEXIT was not imported in this step
LIMUTABDZZMSBI_RFCRETURNMSG was not imported in this step
LIMUTABDZZMSBI_TAG_DIRECTORY was not imported in this step
LIMUTABDZZMSBI_UNITTESTRESULT was not imported in this step
LIMUTABDZZMSBI_WHERE was not imported in this step
LIMUTABDZZMSBI_WHERE_CLAUSE_46C was not imported in this step
LIMUTTYDZZMSBI_T_ABAPCODE was not imported in this step
LIMUTTYDZZMSBI_T_CONVERSION_FIELDS was not imported in this step
LIMUTTYDZZMSBI_T_CONVERSION_METADATA was not imported in this step
LIMUTTYDZZMSBI_T_DATAOBJECTS was not imported in this step
LIMUTTYDZZMSBI_T_DATATABLE was not imported in this step
LIMUTTYDZZMSBI_T_DD02V was not imported in this step
LIMUTTYDZZMSBI_T_DD03P was not imported in this step
LIMUTTYDZZMSBI_T_DD05M was not imported in this step
LIMUTTYDZZMSBI_T_DD08V was not imported in this step
LIMUTTYDZZMSBI_T_DD09L was not imported in this step
LIMUTTYDZZMSBI_T_DD12V was not imported in this step
LIMUTTYDZZMSBI_T_DD17V was not imported in this step
LIMUTTYDZZMSBI_T_DD26V was not imported in this step
LIMUTTYDZZMSBI_T_DD27P was not imported in this step
LIMUTTYDZZMSBI_T_DD28J was not imported in this step
LIMUTTYDZZMSBI_T_DD28V was not imported in this step
LIMUTTYDZZMSBI_T_FIELDS was not imported in this step
LIMUTTYDZZMSBI_T_JOINCONDITION was not imported in this step
LIMUTTYDZZMSBI_T_KEYFIELDS was not imported in this step
LIMUTTYDZZMSBI_T_MESSAGE was not imported in this step
LIMUTTYDZZMSBI_T_OBJECTMETADATA was not imported in this step
LIMUTTYDZZMSBI_T_RANGE_CONVEXIT was not imported in this step
LIMUTTYDZZMSBI_T_RFCRETURNMSG was not imported in this step
LIMUTTYDZZMSBI_T_TAGTYPE_LIST was not imported in this step
LIMUTTYDZZMSBI_T_TAG_DIRECTORY was not imported in this step
LIMUTTYDZZMSBI_T_UNITTESTRESULT was not imported in this step
LIMUTTYDZZMSBI_T_WHERE was not imported in this step
LIMUTTYDZZMSBI_T_WHERE_CLAUSE_46C was not imported in this step *
Can you please reply me asap.
Thanks and Regards
Praveen

Moving Transport Request ID

Hi,
I want to move my Transport Request ID from one project to another. By mistake it is not assigned to any project it is saved as local object , now I want to move it to another project, so that I can release my task.
How is it possible ??
I will definately reward points for this.
Rgds,
Anid

Hi,
if you have saved as local object then package will be $tmp.
for suppose you have saved the report as local object.
Now follow the following path to place it as a task in request number of project you wish.
in se38 goto --> object directory entry.
now here you have give the package name differently not the $tmp. now press the change button in the popup window and change the package and press save.
Now it will ask for request number.
if you want to place as a task in the already created reuest number then select own requests and select the request number in which you want to place. then this will be placed as task. otherwise if you want to create a new request number for this then choose create then it will be placed as task in the newly created reqyuest number.

Problem in Releasing/Transporting Request from Cust & Development Client

Hi,
I had made up a report and i trying to transport it into the PRD Server but the problem when i use Tcode SE09 and there i clicked on the su-request ID it got released and when i clicked on main request ID it has givne run time error. But again i execute the transaction code SE09 and tried to realease the main request ID ,it is not allowing me to do it as a Message displays :-
Task DEVK904185 has the status "Release started"
I dont know why it is happening ? I had relaesed a lot of request before but never faced a problem like that.
Please guide me how to solve this tranport problem..
Edited by: nav009 on Dec 23, 2009 7:46 AM

Hi Juan,
The error which had came during the releasing of main request id was:-
Short text
    Operating system cannot close file "\\piic071\sapmnt\trans\tmp\DEVE904185.DEV"
What happened?
    Resource bottleneck
    The current program "SAPLSLOG" had to be terminated because
    a capacity limit has been reached.
I am currently at display mode of request in which there is a tab named object in which there are 2 lines present. These are:-
1. Comment Entry : Released ; Program ID : CORR(Comment Automatic) ; Object Id: RELE(Comment Entry: Released);
     Object Name: DEVK904186 20091223 115834 ABAPER
2. Program.Program ID : R3TR(OBJECT) ; Object Type : PROG ; Object Name: ZBDC_MM01_R1ZBDC_MM01_R1
The package which we use is ZABAP which is used to transport all the creations and modifications it to the PRD Server...
Is there any way of solving this issue......

Problem in Importing Transport Request

Hi Everybody,
I have a Problem in Importing a Change Request . Yesterday ABAP person had Released two change request from DEV to PRD. I imported the 2. i got successfully imported but another one is still importing( status:Truck symbol)
after that i have imported many Request in PRD server, except this one. how to stop importing this? what may be the reason?
Regards,
Siva

Hi Siva Kumar,
You can reset the status of that transport.
Select the transport (which is showing the running status) -> Go to the import monitor -> right click the truck symbol and delete it.
Best Wishes.

Deleting transport request

Hi Folks,
I have a problem in deleting the Transport request . it says Request/task cannot be deleted because it contains locked objects. It contains the dictionary object which has been deleted from the database.
I am trying to create a same object again, when assign a new package it says object is locked under that request..
Please help me to solve this problem.

Hi,
Your transport request may have the locked object. If you delete this directly you will have to confirm for each object. To avoid this you can goto SE03, select unlock object and then give all of your request numbers, which you want to delete, one by one. Once all of the objects are unlocked you can go back to SE09/SE10 and start from the lowest request. First delete contents of that request and then delete the request. Keep on moving up till you have deleted all the requests.
Regards
Rajesh Kumar

"update rules inactive " error when importing transport request

Hi experts,
I am stuck while importing transport request of update rules. I am moving transport request of update rules from 1 system to another and stuck while importing it in 2nd system. Only two update rules are stuck among all giving an error of "inactive update rules".
I have again tranported it twice after activating theose two update rules.
Please help!!!!!

Hi Heena,
Can you provide more details of the issue like is it a DSO to DSO transformation, error message etc.

Transport Request Not getting created automatically

Dear Sir,
We are facing a problem related to , Transport Request not getting created automatically during the SPRO change activities . We have to manually create the Transport Request and then changes need to be included in the request individually on the manual basis .
However earlier , we had no such problem and Transport Request were getting created perfactly .
We request you to kindly help us on this issue pl .
Rgds
Sonia Agarwal

Hi Sonia,
This is purely because of the client settings. Your client settings are in such a way that the cghanges are not getting captured. As mentioned by Naveed, check to see the client settings and change the settings if needed.
FYI: The SandBox clients will have the client settings as in ur system now.
Regards,
Varadharajan M

BW Authorization Object to restrict Transporting Requests

Hi...
In our BW systems, all the developers are given the profile SAP_ALL. So, the developers have the access to transport their objects from BW Development(BWD) client to BW Quality(BWQ) Client and from BWQ to BW Production client (BWP).
I want to restrict the developers to do the transports. What is the authorization object used to restrict the users to transport requests?
Any documentation how to do that?
Thanks,
Sai.

It can be done with the authorization objects S_TRANSPRT and S_CTS_ADMI.
S_TRANSPRT creating transport request and S_CTS_ADMI for moving transport request.
I would like to work on that project where I can get SAP_ALL access..:)
Check the documentation.
http://help.sap.com/saphelp_nw04/helpdata/en/8d/45ef39521e3314e10000000a11402f/content.htm
Thanks.

STMS: Transport Requests Forever Stuck to Running

Dear SAP Friends,
I am faced right now with a big problem with importing transport requests on our PRD instance.
The TRs are forever stuck on running (truck icon status). I've already edited the tables TRJOB and TRBAT in SM30 but to no avail.
I also checked the tp logs and did some isolation.
Would there be other workarounds? I've already restarted all our instances but I still got the problem.
Hope somebody can help me. Thank you very much in advance!
Best Regards,
Albert

This is happening because import queue is inconsistant
SAP NOTE 12746
check TP SLOG
TP SLOG : TP System logs
STMS > import overview > goto > tp system log (tp slog) : u can find the location of <SID>.LOB file
kill all the Tp process running from the os level and then
delete QE1.LOB
check out for *.LOB file in the DEV system as well
in stms u can see import monitor and keep the cursor on active transport request and delete. This is under import monitor, it does same thing as ps -ef| grep tp and kill pid
Try to do tranport from OS level using TP command
Tp ADDTOBUFFER <TR> <SAPSID>
tp IMPORT <TR>|ALL <SAPSID> http://options ...
check out entries from tables TRBAT, TRJOB & TMSTLOCKR . Use SE16 to delete the entries or use sqlplus (delete * from sapr3.TRBAT and delete * from sapr3.TRBAT)
also checkout if the TMS job is running or not : recreate RDDIMPDP job
Sapnotes concerning this topic or related to this topic:
818065, 302859, 556941, 556946, 71353, 49242, 323726, 56311, 24800, 486991, 506771, 138200

Problem in moving transport request

Similar Messages

Maybe you are looking for