Problem in New GL

Hi
I have configured New GL, but documents are not splitting at segment level.
Can anybody please suggest me on this.
Priya

Hi David,
Now while posting documents, following error message is given:
There is no item category assigned to account 200001/INTI
Message no. GLT2076
Diagnosis
The online document splitting is active in your system. Here, each document is assigned to a accounting transaction variant and each document row to an item category.
You determine for each business transaction variant which item categories can or must be posted here.
The following error occurred for the document you entered:
No item category could be determined for account 200001 in chart of accounts INTI.
System Response
The document cannot be posted.
Procedure
Assign an item category to the account specified.
Priya

Similar Messages

I am facing a strange problem on new iphone 5 that I bought last week. The maps app and the places in photo gallery shows the pin and my location, however there is no information of locations. Tried to close the apps, phone restart, reset etc. Please help

I am facing a strange problem on new iphone 5 that I bought last week. The maps app and the places in photo gallery shows the pin and my location, however there is no information of locations. Tried to close the apps, phone restart, reset etc. I am accessing it via strong wireless connection and it works fine on other devices. Please help.

zapgrap wrote:
there is no information of locations.
Then no information exists. Use the Report a Problem button within the app to report it.

I am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!

i am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!
When i press command+I (Get Info) i see that there is 140 GB "Available Space" on my hard disk but when i click on my hard disk icon on the desktop, and then press "space" i only see 102 GB free!! What the f*???
Please HELP!!!!!! Getting second thoughts on Lion!!!!

Hi b,
Have you restarted yet?

Problem with new version 4.3.2 apps not working " after update to the new version "

Problem with new version 4.3.2 apps not working " after update to the new version "
i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

Hi There
Had the same problem as you. App would terminate when launched.
Solution to working You Tube app:
-Go to playstore
- Uninstall app (it doesn't remove the app, only removes the update)
- "Et Voila", working again.
This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
Hope it helped.
Best Regards

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
Will you please help me in this regard?
Another issue, since i bought my new iphone there is dust inside back main camera.
Your advises are highly appreciated.

Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David

Wifi problems with new ipad

I'm trying to learn how to correct wifi problems with new iPad. It is the wifi only, 64GB model. I want to be able to use it at work, where we have a great wifi network. I can usually connect to our network with no problem, but after an hour or so my iPad loses the network. When I try to reconnect, I see that the network is showing full strength reception, but I get the error message from the iPad that I am "Unable to join" the network. My iPhone connects to the same network seamlessly, as do all of the other iPhones of my co-workers and the older generation iPads that some of our staff has.
At other locations, I typically have no problems (home, apple store, etc.) but I have had the same situation pop up at a coffee shop where I could see that there was a wifi network available, but I could not join it even though it was the shop's free wifi.
I have tried turning the iPad off, turning off wifi and turning it back on again, and forgetting the wifi network in question. I can't think of any other methods that are available to an end user to correct the problem.
I have already gone to the Apple store to swap out the unit, and the newer one is having the same symptoms.
Can anyone offer any advice here? This is quite frustrating.

No problem! Have a read at this most interesting article which has special significance as regards your models!
http://edition.cnn.com/2012/04/05/tech/gaming-gadgets/ipad-wi-fi-issues/index.ht ml
However, I attach an extract from another thread for your perusal. You can disregard any suggestions/links you have already explored -
created by Texas Mac Man in Using iPad - View the full discussion
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom ;)

List of Problems with new Web Mail

List of Problems with NEW Web Mail :
- At first doesn't open full page message list or retain full page as default setting, have to drag down bar
- Only shows 20 message lines after “pulling down” the divider, screen partially empty until I scroll down. It should show at least 26, preferably all available
- After moving bar, bar moves back up after going back to inbox (not delete message) after reading a message, have to move it down again, and again...
- Doesn't go to next message when delete message on screen is selected, no setting option for default to do this.
- There is a drop down to select which folder to move a selected email to. The initial display shows 7 usable choices, with the usual slider and arrow to show more choices. The space on the slider clearly shows more choices are present (actually about 20 or so are there), but any attempt to use the slider or arrow to see more choices causes the drop-down to instantly disappear. I can't move the selected field with arrow keys either. I can select any of the visible 7 choices, and move an email to only one of the 7. NOTE: This one works in both IE and Firefox, but if Verizon Webmail was fully web standard (see http://en.wikipedia.org/wiki/Web_standards) compliant it would also work in my preferred browser, Mozilla Seamonkey, the direct descendant of the original Mozilla browser. Webmail should be FULLY web standard.
- Occasionally a message will move from inbox to trash, without NO indication or command to move them.
- Emails occasionally flash an error message and simply disappear - not to trash or other findable place, just disappear. No time to read the error message either.
- No way to set a whitelist for supposed spam emails, unless the whitelist for “Blocking” is the same. Very unclear.
- How can I switch my service back to the original, basic, email which works ok? I know it’s still there, since some of my other accounts still access it!!!
This seems my only way of getting this info direclty to the programming staff. If it doesn't actually do this, will SOMEONE PLEASE FORWARD THIS MESSAGE TO THEM !?!
Thanks!

vz_ric wrote:
The majority of websites are set up the same way for all browsers. It's the software manufacturers responsibility to make their software compatible with websites, not the other way around. Otherwise everyone who has a website will have to make 10 different sites to work multiple browsers.
Contrarily, it is Verizon's, as well as other companies like Verizon whose customer base uses a wide variety of web browsers, web page designers' responsibility to use only standard W3C-recognized code and not to use non-standard non-W3C-recognized code, e.g., Microsoft's Internet Explorer specific code, when designing their web pages. In my opinion based on my observations, Verizon's web page designers are too often guilty of using IE-specific code.

I am using iphone 4..32 gb...i hav updated to ios6..i am experiencing serious lags...watever m doin d phone lags n goes to the home screen...frequency is much greater..please help me with it...i even replaced my device but same problem on new one..!!!!

please help me with dis...
I am using iphone 4..32 gb...i hav updated to ios6..i am experiencing serious lags...watever m doin d phone lags n goes to the home screen...frequency is much greater..please help me with it...i even replaced my device but same problem on new one..!!!!

Restore the phone as a new device. There is probably something that was corrupted on your phone during the update and has been passed via the backup to the replacement phone. If the corruption/problem is contained in the backup, you'll need to re-sync your data, and re-install your apps manually. Restoring the backup again will only bring the problem back with it.
If restoring it as new does not fix it, then make an appointment at the genius bar.

There is a problem The new update is okay, but does not the name of appea in the AirPlay device is in sleep mode.

There is a problem
The new update is okay, but does not the name of appea in the AirPlay device is in sleep mode.

Hi,
Firstly, I would suggest we use Exchange 2013 FE as the Outlook Anywhere proxy server.
For the certificate issue, it mostly occurs because the host name that Outlook are trying to access does not match the certificate SAN. Please check with this point. If they do not match, you
can change the host name by referring to the following article:
https://support.microsoft.com/kb/940726/en-us?wa=wsignin1.0
Thanks,
Simon Wu
TechNet Community Support

My Magic Mouse (wireless) paired with my 2010 iMac: Often at startup the cursur just sits in top left corner of screen, frozen. Not a battery problem. New. I take batteries out, reboot (a real pain)... then ok. HELP!

My Magic Mouse (wireless) paired with my 2010 iMac: Often at startup the cursur just sits in top left corner of screen, frozen. Not a battery problem. New. I take batteries out, reboot (a real pain)... then ok. HELP!

Hello:
Try resetting the PRAM and SMC.
Barry

I am having problems installing new software for my ipod i keep getting a message that the network has timed out. I have tried two different computers and networks what else can I do?

I am having problems installing new software for my ipod
I keep getting a message that the network has timed out.
I have tried two different computers and networks what else can I do?

Try temporarily disabling your firewall and anti virus software and try again...
See here for Connection Issues
http://support.apple.com/kb/TS1379
From Here
http://www.apple.com/support/itunes/troubleshooting/

Adobe aftereffects is not working on os x maverics all updates...... is dis soft. will work on the new os x yosemite.?? y apple is nt working on dis problem wen users are facing problems with new os x .....

Adobe aftereffects is not working on os x maverics all updates...... is dis soft. will work on the new os x yosemite.?? y apple is nt working on dis problem wen users are facing problems with new os x .....

I suggest you contact Adobe tech support or their Mac forums for assistance.

Reposting this If your having problems with new Windows 8.1 do a full uninstall of all Apple

Reposting this If your having problems with new Windows 8.1 do a full uninstall of all Apple iTunes programs but uninstall them in right order and then do restart of computer then reinstall newest iTunes and it will all be fixed up syncing problems or other problems this is thanks to Apple phone support

What is your technical support question for these user to user technical support forums?

I receive error message "Unable to connect to iTunes store" when trying to download updates to my iPhone4. No problems buying new apps.

I have just started receiving the message "Cannot connect to iTunes store" when I attempt to download upgrades to previously purchased apps. However, I have no problem buying new apps from the iTunes store. No issues with wifi or connectivity. Does anyone have any ideas or fixes? Thanks.

1st. Turn off your phone and back on.
if that does not work, do a reset by holding the on/off button and the home button until the Apple logo comes on.

Problem creating new sites. The formula refers to a column that does not exist

Good morning,
I have a problem creating new sites in my development environment. We have a template which works properly when we create new sites with it. However, when we add one new content type in the site created and save it as a new template, we can't create new sites
with this template. The error log is that there are one problem in one column [The formula refers to a column that does not exist. Check the formula for spelling mistakes or change the non-existing column to an existing column].
I have opened the wsp template with visual studio but I can´t discover what column is the problem because the log only refers to the feature (ListInstances).
Anybody knows how to find my problematic column?
The error is:
Feature Activation: Threw an exception, attempting to roll back. Feature 'plantilla Llave en Mano 20141222 v2ListInstances' (ID: '6c61a3bf-3c51-4064-958b-d154729233e7'). Exception: Microsoft.SharePoint.SPException: La fórmula hace referencia a una
columna que no existe. Compruebe que la fórmula no tiene errores ortográficos o cambie la columna que no existe por otra que exista. ---> System.Runtime.InteropServices.COMException (0x81020057): La fórmula hace referencia a una columna que no existe. Compruebe
que la fórmula no tiene errores ortográficos o cambie la columna que no existe por otra que exista. at Microsoft.SharePoint.Library.SPRequestInternalClass.UpdateField(String bstrUrl, String bstrListName, String bstrXML) at Microsoft.SharePoint.Library.SPRequest.UpdateField(String
bstrUrl, String bstrListName, String bstrXML) --- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.SPElementDefinitionCollection.ProvisionListInstances(SPFeaturePropertyCollection props, SPSite site,
SPWeb web, Boolean fForce) at Microsoft.SharePoint.Administration.SPElementDefinitionCollection.ProvisionElements(SPFeaturePropertyCollection props, SPWebApplication webapp, SPSite site, SPWeb web, SPFeatureActivateFlags activateFlags, Boolean
fForce) at Microsoft.SharePoint.SPFeature.Activate(SPSite siteParent, SPWeb webParent, SPFeaturePropertyCollection props, SPFeatureActivateFlags activateFlags, Boolean fForce)
Thanks in advance

Hi Enrique,
According to your description, after added a content type into the new site and save the site as a template, there is an issue when creating another new with the newly
site template.
Based on the error message “The formula refers to a column that does not exist…”, seems that it would be an issue of a Calculated column in the content type you added,
please go through all the Calculated column in that content type to see if the formulas all work well.
Feel free to reply if there any progress.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

Problem creating new reports in 11.1.1 - still retains prior reports POV

I have a problem creating new reports in 11.1.1 - it still retains prior reports POV. Example - I create one report - which shows "all locations". I then want to create another report, with a different POV, specific for just one location "North America". If I try to start with the original report and change the POV, the older reports default to the newest reports POV. I tried saving the grid with a different name, I tried creating a report from scratch (not using any prior reports, objects or grids) and I still get the same result. I also tried to use a new database connection - still no luck.
Any suggestions? Am I missing a critical step?
Going forward, what is the best approach to take to create several reports, with differing POVs? (example, the period and fiscal year may differ, or a location may differ). I want the reports to run, without using one report and chagning the POV each time.
Thanks,
Linda

I think this is on the same lines as this question > HOW TO SET FR POV PER REPORT, NOT PER CONNECTION ?
Cheers
John
http://john-goodwin.blogspot.com/

Problem in New GL

Similar Messages

Maybe you are looking for