Problem in print output at the time of taking print

Hi
I have one problem with my login ID, I create PO from my ID after complete all process I take print out. At that time the system automatically first take print SAP ....... ..... then the PO. In this case how I can set the print outputin my login id. Please guide me.
Thanks

HI,
At that time the system automatically first take print SAP ....... ..... then the PO. In this case how I can set the print outputin my login id. Please guide me
i.e you are getting SAP page print or ??
could you elaborate pls .
regards

Similar Messages

  • Print Output at the time of rescheduling

    Hi Friends,
    When i reshedule the Orders in V_V2,I am getting printout puts for all the orders rescheduled,In Out put type Multiple Isuing is not ticked.When i normally change the sales order i am not getting output triggered,But when i reschedule i am getting prined outputs.
    Can you please explain how to control outputs get printed at the time of rescheduling.
    Thanks,
    Sree.Manam

    Have you maintained a program+routine for Change output on the output condition type?  This is like a requirement routine that issues a change output when the code in the routine sets SY-SUBRC to 0. The Change output paramters are maintained in the General data tab of the output condition.

  • I cannot print any websites; every time I press "print" it goes to "save the file as [xps]" instead. What's up?

    I cannot print any websites; every time I press "print" it goes to "save the file as [xps]" instead. What's up? I can print in Word without problem.

    Bless you, bless you, bless you. After months of living with this annoying problem and not being able to print out emails or websites it is, in a stroke, totally solved. Thank you! It works. It's a wonder and you're a winner!
    Paul

  • My 1st generation Time Capsule/2007 keeps shutting off and disconnecting from internet?  What could be the problem?  How long do the Time Capsules usually last?

    My 1st generation Time Capsule/2007 keeps shutting off and disconnecting from internet?  What could be the problem?  How long do the Time Capsules usually last?

    That it is still working is miraclous.. most have died.. lots started flaking out at 18months to 2years..
    See deadtimecapsule.org
    The few that remained now seem to have reached EOL.. you can repair if you have some skills.. fairly cheaply.
    But it is well and truly time to replace.
    https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair

  • IW32 - Print Attachment Document at the time of form printing

    Hi,
    Anyone help me how to print attachement document in Maintenance Order Document ( IW32 ), by the time of Form printing ?
    Regards,
    Hary

    Hi,
    we are looking for a similar solution. We want to include TIFF,PDF at the end of SAP-Script or SmartForms.
    For example: We want to send a purchase-order Formular (out of ME21N) with attached TIFF's or PDF's, so that the vendor received a purchase-order with a design of the material.
    Did you find a solution ??
    Thank for answer.
    Thorsten

  • Leaving the printer on all the time

    I just purchased a C309g Photosmart Premium AIO printer.  I did a search but couldn't find an answer.  Is it ok to leave my printer on all the time, or should it be turned off?  Thanks in advance.

    It should't hurt anything, Just use a small amount of electricity .  My Piece of junk "all in one"  wont even turn off - I have to unplug it, so it stays on all the time!

  • My report is printing half of the page when I print the report Hp psc 1315

    My report is printing half of the page when I print the report in this printer
    Hp psc 1315 all in-one and when the operating system is windows xp , but when
    I run the same report in windows me , and the same printer it is running well
    And my report version is :
    Report Builder 6.0.8.23.0
    ORACLE Server Release 8.0.6.0.0
    Oracle Procedure Builder 6.0.8.20.0
    waiting for your valuable answer .
    Best regards
    Jamil alshaibani

    i would like to now if there is any additional software required for the windows xp and oracle report to solve this problem
    please help
    betst regards
    jamil alshaibani

  • Downloaded iTunes 11.0.2.26,the print CD jewel case does not print right,all the songs listed are printed in about a 1/2in. space,how can I get it to print right

    Downloaded iTunes 11.0.2.26,the print CD jewel case does not print right,all the songs listed are printed in about a 1/2in. space,how can I get it to print right

    I recently upgraded to itunes 11.0.1.12 and that fixed the CD Jewel Case Insert song titles problem. Thanks itunes. It's working great!!.

  • How to select the printer and select the ICC profile for printing with VBScript?

    I try to automate my printing procedure in photoshop. The problem is that I don't know how to select the printer and select the icc profile for printing with vbscript like I manually do in the print-menu in photoshop?
    Anyone has done this before?
    Thanx!
    jus

    Client/Server version:
    - D2KWUTIL.PLL library provides a 'Select Printer' dialog box to be used in Forms: WIN_API_DIALOG.SELECT_PRINTER
    http://guenter-huerkamp.dyndns.org/oracle-doc/docs/html/d2kwutil.html
    I suggest you to create a form to invoke the report, allowing user to select the printer and then pass it as parameter DESNAME

  • I'm trying to print a multiple page document from my ipad using an Airprint printer. Only the first page is printing, Please help?

    I'm trying to print a multiple page document from my ipad using an AirPrint printer. Only the first page is printing. Please help. The printer works correctly with my desktop and laptop.

    What version of iOS are you using?  Some people were having this problem before, and it was fixed when they updated to iOS 5.

  • My printer (deskjet 690c) has started printing gibberish all the time.

    As soon as I switch it on it starts printing junk. The only way to stop it is switching it off. I have tried reloading software but to no evail. Any suggestions please.

    This would generally be caused by a print job that was interrupted; when the printer is turned back on the job is out of sync and is not properly recognized by the printer.  You will need to delete the print job from the queue. 
    What is the operating system?   Running the diagnostics at http://www/hp.com/go/tools may help resolve the issue.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Photosmart C4795 won't print (most of the time)

    I have a Photosmart C4795 installed on two computers, one with XP, the other Vista. The installation(with the Vista computer) went smoothly, along with all tests and some documents of my own, and on the XP one. After a few months it started giving me a "paper not found issue". I discovered I needed to push hard enough to get the paper in far enough, but not too far. Now (on the XP computer) it says its printing, pulls in the paper and then sits until I get an error message on my computer. I went through all the guided solutions and none worked. The XP computer is an HP Mini 1000, and updating HP doesn't change anything.
    This question was solved.
    View Solution.

    I managed to get it working by sending the document a second time, then cancelling the errored print job on my computer, and after it was cancelled on the computer cancelling on the printer. The moment the paper ejected I placed it on the paper tray at a point an inch away from where I was told to in the animations. Then it started on the second print job and worked (it stopped because I only had one page, but resumed when I placed the paper at the same spot and pushed OK.) If the whole problem was in fact where I was placing the paper I wish the animations would show proper positioning.
    If anyone needs assistance or clarification on how I made it work again please reply.

  • Print output not the same

    Hello.
    I have a puzzle that I cannot seem to find a solution for.
    When trying to print a PDF, one output is not the same as the other; let me explain.
    - Open PDF > File > Print > Make sure "Fit to page" is selected > Print = Printout looking good.
    However...
    - Highlight PDF > Right click > Print = Document is not shrinked to fit, and I lose part of my PDF.
    Is there a fix for this?
    Using either Acrobat Standard 8 (to the latest update) or Adobe Reader 9 (to the latest update).
    Thanks for any input, advice.

    Ok, I can see from my first post that the question is not clear.
    There are 2 ways to print a PDF document.
    Option 1
    Opening the PDF, going to File > Print or clicking on the Printer icon.
    From there you get the print dialog and you select printer, properties, etc, etc, etc...
    This one works fine.
    Option 2
    By going to the folder where the PDF is stored, right-clicking on the PDF and selecting print (without opening it). This one does give me the printout with the missing margins.
    I've looked at the printer settings and printing preferences (from Printers and Faxes), there is no options that I could see to say to always make the document fit. Is there such a setting from inside Acrobat's preferences?
    Hope this clarification makes my problem clearer to understand.

  • I am trying to print a pdf document from an electronic journal at my school, and i can only get it to print what is on the screen at the time i hit print.  How do i get it to print the whole document?

    how do i get it to print the whole article?  i don't seem to have a problem printing from my old windows laptop

    melbaby_3 wrote:
    when I clicked on your link and hit print, all pages were there!
    That suggests there's no problem with Safari or Quartz, the PDF rendering engine used by Safari, Preview, and other Mac applications.
    When I'm in the database and have the article open that I want to print, I click on the "full text in pdf" link and it opens in another safari window.
    Does the PDF in this other Safari window have all the pages? If yes, why don't you print from this window?
    It's very difficult to tell what might be going on if you don't give very specific details.
    For instance, in many reference databases, full-text articles are not free. You have to pay to view them, either article by article, or by subscription. Your school may have such a subscription, but, if it does, you probably need to access the database through the portal, web site, or facility provided by your school (your school's librarian should be able to help you with that). If you don't, the database has no way of knowing you have a right to view the full text, and may give you just a preview or the article's first page.
    Another possibility is that the database provides full-text PDFs in a format not compatible with Quartz, which may be able to render only the first page. But, in such a case, I'd expect Safari to print blank pages. If that's the case, you need to save the PDF on your hard disk and open it with Adobe Reader (Preview wouldn't work).
    There are other possibilities, but these two seem to me the most likely.
    Would I have to save it in preview first
    You should save the PDF on your hard disk from Safari. (I think you should do this anyway, just in case you need to refer to the article again later.) Instead of just clicking the  "'full text in pdf' link", press and hold Control, then click. This should give you a contextual menu; if the link points to a PDF file, you should see the commans "Save Linked File to 'Downloads'" and "Save Linked File As…". Use either, save the file, then, in Finder, double-click on it. Preview should open it.
    It is possible that the link is not to a PDF file, but to a script which fetches that PDF file for you. In that case, it's pointless to download it. Click on it, and then, if the PDF viewing window opens in Safari, move the cursor towards the centre of the bottom of the window. A bar with commands should appear; one of them will download the file to your Downloads folder.

  • How do I create an excel file that has the volume output and the time at which it occured?

    Hello:
    I am using Labview to control a New Era Pump Systems automatic syringe pump and to record diameter measurements from a LaserMike optical comparator. My program is fully functional, the code is attached with all auxilliary files in the NE-50X folder. I mostly understand my program, I used drivers for the NE-50X pump found on the NI website to build my code and added to it as needed.
    If anyone has ideas about how to do any of these three things, your help is greatly appreciated. I have the output from the syringe pump going into a line graph while I run the test with the time on the x-axis and volume on the y-axis. How would I be able to create an excel file from this information? I would like the excel file to have the time in one column and the volume at that time in the next column. I though that I had wired it correctly, however I feel that the time seems to be a little off and very exact. Attached is the block diagram of what I have done.
    Hello:
    If anyone has ideas about how to do any of these three things, your help is greatly appreciated.
    Attachments:
    RATETEST.vi ‏202 KB

    Let me start by answering the specific question, and then I will provide some suggestions on the code.
    The function you want is the "Write to Spreadsheet File", which you're already using, albeit in a confusing means (more later). I was not able to find any place in your code where you're actually acquiring time information, so I don't understand your comment about the time not being exact. (I'm assuming you mean "not", even though that word was not in your actual sentence.)
    As for the code:
    As I mentioned, you're using the "Write to Spreadsheet File" twice, as well as the "Write to Measurement File" Express VI. All three seem to be logging the same information, though one of the "Write to Spreadsheet File" functions is logging some sort of volume and diameter information. Please pick one.
    You're looping around the path for one of the "Write to Spreadsheet File" functions, but not for the other two functions. Why are you looping the path in the first place?
    You' re continuously accruing data into an array to put onto an XY Graph. Please keep in mind that this means the program will slow down as it progresses as this array gets larger and larger, and LabVIEW needs to shuffle memory around. Depending on how fragmented your memory is, you may find the program will crash since LabVIEW cannot allocate a large enough contiguous block of memory for the array.
    Your wiring really needs to be cleaned up. Tip: Right-click on a wire and select "Clean Up Wire".
    In the middle of the diagram you have a case structure in which the True part has a single iteration loop that's adding 1 to the iteration and updating some local variable, and in the False part you're doing something else with it. I have no idea what you're trying to do, but surely there must be a better way to do it.
    You seem to have two tank indicators on top of each other on the front panel and then flipping the visibility of them based on some value. I would think that it would be easier to simply display both at the same time, no? As a user, I would find it somewhat perturbing to see the tanks appear and disappear.

Maybe you are looking for