Problem in Purchase Requistion.

Hi Friends,
we have used the two BAPI' s for release the purchase requistion ME53N.
The frist bapi 'BAPI_REQUISITION_DELETE' delete the item of the purchase requistion , this one is working correctly.
the second bapi "BAPI_REQUISITION_RELEASE_GEN",
in debug mode the 2nd bapi successfully release the purchase requistion but it normal mode(with out the debug mode) it's not release the purchase requistion, we are putted the wait statement upto 2 seconds but still i am getting the same problem,
Can you please help me.
Thanks & Regards
CHARAN.

Hai Please read given below Information and please read status in table requisitionItems.
This method enables you to list all purchase requisitions that have tobe released with a certain release code and group (collective release).
Notes
The authorization object M_EINK_FRG is checked.
Transfer
The release code must be passed on in the parameter RelCode and the release group in the parameter RelGroup.
The parameter ItemsForRelease determines whether only thoserequisitions awaiting release are listed, or only those that have
already been released. The latter is useful if you wish to have a listfor the purposes of cancelling releases that have already been effected.
Return
The result is returned in the table RequisitionItems.
Return messages
Messages are returned in the parameter return. The parameterdocumentation shows the return codes and their meanings. .

Similar Messages

I am facing a problem in the sales order the purchase requistion no is not

Hello SD Gurus,
I am facing a prob in the sales order the purchase requistion is not coming, is there any config settings is required.
In my bcness process after creating the SO automatically through wokflow the Purchase order will trigger.
I have checked in the SO which is existing in the schedule line the purchase requistion is not showing.
In the schedule line functionality is perfect.
Other than this is it required more..............
Gurus i am waiting for your reply.......................
Regards,
Kishore

Hi kishore
Firstly in VOV6 select the schedule line CS and check wheather in that schedule line the following data has been maintained or not
Document type : NB
Item category : 5( Third party)
Account assignment category : X ( Account assignment )
Secondly go to VOV7 and select the item category TAS and check the following data
Automatic PO generation has been checked on or not
Billing relevance should be F
Regards
Srinath

Unable to create a PO via Purchase Requistion

Hi Gurus ,
I am facing a Problem while creating a Purchase order with ref. to a Purchase Requistion.
System is showing an error "Purchase requisitions of document_type ZVS or item category L may not be assigned to purchase orders of document type ZVS or item category L".
Doc. type of Pur. Req. & PO is ZVS
Item Category for PR & PO is L
Kindly Guide.
Regards
Honey

Goto
SPRO-> Materials Management -> Purchasing -> Purchase order -> Define Document Types
Select your document type ZVS and click on allowed item categories & check whether item category L is assigned.
Then select link purchase requisition - document type. Here check whether your purchase requisition document type ZVS and item category L combination is maintained.

Purchase Requistion - Agent Determination using responsibilities - Issue

Hi Everyone,
I am new to workflow. I am having an issue wrt Purchase Requistion - Agent Determination using responsibilities.
Created some 30 to 40 resposibilities with combination of inputs - R1, P1 & Cost Center
Checked rule with responsibilities in Simulation mode and for the given inputs shows correct output.
Same config is present both in DEV and ACP. Simulation works fine in both systems.
But when I created Purchase Req. in DEV and save it. Workitem is generated for the correct agent. But when I do the same test in Quality, it fails and created Workitems for several agents.
Checked container info. in both systems,no.of agents is the ONLY difference (i.e. 1 in DEV and 30+ agents in Quality).
Put shred some light on this issue.
Workflow Used: BUS2009
Task : TS00007986
Thanks a ton in advance.
Regards,
Krishna

Hi,
Open the workflow (WS*******) with SWDD and see the bindings for the rule in the approval step (using TS00007986). Do they look the same in both environments? Are you passing the same parameters for the rule?
Another thing that you should check is a possible authorisation error. Maybe the users are not authorised to execute the needed functions for finding the agent inside the rule (common problem).
Also try to read the technical workflow log (Start a workflow, open SWI1 and drill-down to the workflow log). Can you see some error messages there? You will probably find a message saying that "cannot execute agent rule" or something like that. It is WF behaviour that if it cannot find an agent it will send the work item to all possible agents (unless otherwise configured).
Regards,
Karri

Release of purchase requistion

Hi friends,
We have made our purchase requistion can't be released without Fixed vendor. We have made this for ME54N(Individual release of PR).
Users are smart enough to release them by using ME55(collective release of PR) without any fixed vendor assign to PR. How can we control this. PR can be released without fixed vendor.
We controlled it in MM54N.
How to control this in ME55.
Please any help ??
Thanks,
Bhairav

hi,
just check by making the screen selection for PR Fixed vendor field mandatory.
I have checked without release strategy and in MRP system is not suggesting for Fixed vendor,(but with some other problem i am not able to activate the release strategy in my system) while ur going to change the PR then system is asking for the Fixed vendor and iam assuming that after the release strategy activating for PR that generated through MRP and while releasing in ME54 or ME 55 system will ask for the fixed vendor, then he can save that PR.
please check from ur end and please let me know.
Regards,
batchu

Purchase Requistion being deleted on Technical Confirmation

Dear All,
I have seen that the Purchase requistion is being deleted after Technical Completion even after a PO has been created and Service Entry Sheet is also done for that PR.
As I understand the system should delete only PR's which are open on TECO.
What could be the problem in this. We are using ECC 6.0 Ehp 4.
Regards,
MLN Prasad

Dear Jane,
I very much remember that it is not the Standard functionality in 4.0B,4.6,4.7,ECC 5.0. I worked on all these versions.
In all these versions on TECO the system marks Deletion flag only if PR/ Reservation is open, but not when Goods are issued or if PO exists for the PR.
I hope all others in the forum also do agree this. I remember even in ECC 6.0 seeing the same but not sure.
Presently we are using ECC 6.0 EHP4.
Logically also, when you process a PR(created a PO) it should have completed but not deleted which is not correct.
Even considering a Maintenance Order, if completed, you will set status CLSD (Business Completion) and not set a deletion flag right..?
If I am wrong, others may correct me.
Regards,
MLN Prasad

Report problem of purchase that not make from me

Report problem of purchase that not make by me

You can contact iTunes support via this page (these are user-to-user forums) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Error while Creating PO from Purchase Requistion in Third Party Sales

Dear Team,
While Creating the Purchase Order from Purchase Requistion in Third Party Sales. When I am saving the PO I am getting the Error in GL Account Cannot be Used. I have disabled the field G/L Account in settings of Account Assignment Category of Third Party. Still I am facing that Error while Creating Purchase Order. Can you guide me where we do this Assignment of G/L Account so that I can change the G/L Account.
Thanks,
Farhan.

Dear Farhan,
1. Go to T. Code: FS00 and enter GL number and Company Code and go to Tab: Create/bank/interest, write down the field status group.
2. Go to T. Code: OBC4 and Select your Field Status Variant and Double Click: Field Status Group (From Left-hand Dialog Structure)
Double-Click on to Field Status Group (as noted down from in Step 1).
From Select group, Select Additional account assignments and make Earmarked Funds, as optional.
Best Regards,
Amit

HT201359 i have a problems while purchasing or download a free item in apps store or itunes, it said that you have a problems with previous purchase, it also said that my payment method was decline.,..

i have a problems while purchasing or download a free item in apps store or itunes, it said that you have a problems with previous purchase, it also said that my payment method was decline.,..

Hi shldr2thewheel,
it has been a while since we have last spoke, I would like to let you know, I am still working on getting used to the switch from windows to a Mac/Apple system. I do have a new question for you, I did purchase In Design CS5.5 through journeyed.com through Cuyahoga Community College of which I attend as a student, is there a way to purchase an online book through iTunes to learn that as well? Also, you know me, the struggling student, I would also, when and if the book can be purchased through the iTunes, would need to know if you do know of a much easier book for struggling students like myself and at a reasonable price as well for the In Design CS5.5 program. Our campus bookstore had closed early, and, so did the colleges library and our local library here where I do live, so, I cannot go to either place to purchase a book or to take out a book, plus cash funds are low at this moment as well but, I do have money left on the iTunes account to use, if it can be used. So, can it be used, the iTunes money, towards finding a low priced online book? I am in great need of assistance as I have a project due for my one course for this Tuesday, September 4, 2012.
Sincerely in need of help once again,
Kim

Error in vendor selection while creating Purchase requistions

Hi,
I was using bapi_requestion_create to create purchase requistion with different quotas for different vendors.
Ex: vendor A   with 60%
      vendor B   with 40%
If the required quantity is 100 items then it has to split 60 items to vendor A and create seperate Puechase Requistion.
and for 40items with another Purchase requsition.
Currently iam able to split the noof purshcase requisiton but it was picking only with one vendor.
MY Code :
*******Split PRs with respect to Quota ************************
      data : lv_lines type i,
             lv_qty type p DECIMALS 4.
      lv_qty = it_oo-qty.
      DESCRIBE TABLE t_equp LINES lv_lines.
      IF lv_lines GT 1.
        clear : w_equp.
        loop at t_equp into w_equp
                      where qunum = w_equk-qunum.
          refresh : t_req_item.
          clear   : w_eord,
                    t_req_item[],
                    t_req_item.
          READ TABLE t_eord INTO w_eord
          WITH KEY matnr = it_oo_sum_purch-matnr_sap
                   werks = it_oo_sum_purch-plant
                   lifnr = w_equp-lifnr.
          if sy-subrc is initial.
            it_oo_purch-AGREE     = w_eord-EBELN. "To Fill ALV
            it_oo_purch-ITEM      = w_eord-EBELP. "To Fill ALV
            it_oo_purch-FORNEC    = w_equp-LIFNR. "To Fill ALV
            t_req_item-doc_type   = c_zbmr.
            t_req_item-pur_group = it_oo-ekgrp.
            t_req_item-material   = it_oo_sum_purch-matnr_sap.
            t_req_item-plant      = it_oo_sum_purch-plant.
          t_req_item-AGREEMENT   = w_eord-EBELN.
          t_req_item-AGMT_ITEM   = w_eord-EBELP.
          t_req_item-FIXED_VEND = w_equp-LIFNR.
          t_req_item-QUOTA_ARR   = w_equk-qunum.
          t_req_item-QUOTARRITM = w_equp-qupos.
            t_req_item-gr_ind     = c_x.
            t_req_item-ir_ind     = c_x.
          t_req_item-MRP_CONTR   = 'NOV'.
            CONCATENATE it_oo_sum_purch-due_dte+4(4)
                        it_oo_sum_purch-due_dte+2(2)
                        it_oo_sum_purch-due_dte(2)
                        INTO t_req_item-deliv_date.
            t_req_item-QUANTITY   = ( w_equp-QUOTE / 100 ) * lv_QTY.
          endif.
********Rounding off values*******************
          data : lv_int(20) type c,
                 lv_dec(20) type c,
                 lv_tot(20) type c.
          clear : lv_int ,
                 lv_dec,
                 lv_tot.
          lv_tot = t_req_item-QUANTITY.
          split lv_tot at '.' into lv_int lv_dec.
          if lv_dec(1) ge '5'.
            lv_int = lv_int + 1.
          endif.
          t_req_item-QUANTITY = lv_int.
          APPEND t_req_item.
          clear : v_number.
Create purchase requisition by group
          CALL FUNCTION 'BAPI_REQUISITION_CREATE'
               IMPORTING
                    number            = v_number
               TABLES
                    requisition_items = t_req_item
                    return            = t_return.
ERRO
          IF t_return-type CO 'AE'.
            CLEAR: v_msg, v_x.
            CALL FUNCTION 'WRITE_MESSAGE'
                 EXPORTING
                      msgid = sy-msgid
                      msgno = sy-msgno
                      msgty = sy-msgty
                      msgv1 = sy-msgv1
                      msgv2 = sy-msgv2
                      msgv3 = sy-msgv3
                      msgv4 = sy-msgv4
                 IMPORTING
                      messg = v_msg.
            PERFORM zf_grava_log_erro_oo
                          USING it_oo_purch it_oo_sum_purch v_msg v_x.
SUCESSO - Atualiza Tabela zsytmm_pr_po
          ELSE.
            CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
                 EXPORTING
                      WAIT = c_X.
            CLEAR: v_msg, v_x.
            CONCATENATE text-026 v_number INTO v_msg
                                  SEPARATED BY space.
            it_oo_sum_purch-QTY =    t_req_item-QUANTITY.
            PERFORM zf_grava_log_sucesso_oo
                      USING it_oo_purch it_oo_sum_purch v_msg v_x.
            CLEAR: zsytmm_pr_po.
            vl_item = c_00001.
            zsytmm_pr_po-banfn    = v_number.
            zsytmm_pr_po-bnfpo    = vl_item.
            zsytmm_pr_po-ebeln    = c_false.
            zsytmm_pr_po-ebelp    = c_false.
            zsytmm_pr_po-zshmode = it_oo_purch-shipm.
            MODIFY zsytmm_pr_po.
          ENDIF.
        endloop.

Hi,
You have to fill DES_VENDOR & FIXED_VEND of structure REQUISITION_ITEMS while calling BAPI. But while going through your code,
* t_req_item-FIXED_VEND = w_equp-LIFNR
is commented, uncomment the same and add line for DES_VENDOR also.
Regards
Vinod

User Exit -- To include purchase requistion/purchase order in COOIS report

In a MTO envirnoment, trying to include purchase requistion/purchase order
with requested delivery date information in COOIS report. Is there a
user exit for this ?

Hi,
Please follow this an Example:-
The COOIS report (Order Info System) gives the complete information regarding Production Order like header report, Operation report, Component Report, document report.
This document deals with the addition of extra fields in the output display of COOIS.
For the demo purpose, I have added the material group (MATKL) for the production order material for header report.
BADI Name: WORKORDER_INFOSYSTEM
Method: TABLES_MODIFY_LAY
In the method TABLES_MODIFY_LAY there are many table parameters for different data display of the production order .In this scenario only the header detail structure is being extended with append structure.
Add the extra fields to be displayed to through append structure to IOHEADER_TAB, here MATKL.
In the method write the code for updating the field value.
DATA : BEGIN OF st_matkl,
           matkl TYPE matkl,
           END OF st_matkl.
DATA : st_header TYPE ioheader.
LOOP AT ct_ioheader INTO st_header.
    IF NOT st_header IS INITIAL.
      SELECT SINGLE matkl
             FROM mara
             INTO st_matkl
             WHERE matnr = st_header-matnr.
    ENDIF.
    st_header-matkl = st_matkl-matkl.
    MODIFY ct_ioheader FROM st_header.
ENDLOOP.
Regards,
Ravi

Problem in Purchase Requisition Creation

Dear Experts:
We are facing a problem while purchase requisition creation. We have created an Internal order No. 600406 and an Asset in Company Code AB01 but while creation of Purchase Requisition level when we are selection that Order and Asset in Purchase Requisition system automatically changing my Order no. 600020 instead of 600406. I've checked OKB9 where Order no. maintained as 600020 against Company code AB01 which I deleted and save but after that Purchase requisition asking for Order Number that means we have to maintain Order number in OKB9. Now can you please advise how can we get my current order number in requisition instead of any default number.
Thanks in advance and your kind suggestion is highly appreciated.
Best Regards.
Ripon Kumar Paul

Please find attached screen shots of OME9

Problem in purchase requisition release strategy code

Hi
We are facing a problem in purchase requisition, a new release strategy was created and change request transported but when PR is displayed in release strategy chart a same user is showed in different release strategy code.
Note: new strategy was copied from other.
Thanks in advance.

hi,
As you said tht you have copied the release stategy n created the new one...
If you do so, you would have copied the class also...to which the release group is attached...
If this is the case, then system doesn't recognise the new one, and inorder to solve it you have to define the new characteristic and class...then assign this class to the release group and make your release strategy again...
Once you do this check the release strategy at OMGSCK...and then try at PR...
You do all settings at :
SPRO >> IMG>> MM >> Purchasing >> PR >> define release strategy >> W/o classification >> here edit characteristics/class and all other link are provided...
Regards
Priyanka.P

How to configure purchase requistion in third party sale pls send me detail

dear expert
how to configure purchase requistion in third party sale pls send me details. waiting your valuable reply
vicky

you can find the details in the below links
Re: THird party sales complete scenario
http://wiki.sdn.sap.com/wiki/display/ERPLO/PROCEDURETOCREATETHIRDPARTY+SALES
http://www.sap-img.com/sap-sd/process-flow-for-3rd-party-sales.htm
Regards

Planned order and Purchase requistion both is generating in MRP

Dear All,
At the time of MRP explosion for Finished material, system is generating Planned order and purchase requistion, both, for detailed material, (e.g. the BOM is a single level BOM). Whereas, I want to generate Purchase requistion for all. I am not getting that for which logic it generating Planned order as well as purchase requisition.
Pl. explain.
Thanks,
Prasun.

Hi Prasun
The procurement proposal indicator dependes on the procurement type assigned in material master. If you assign prod Type F it will automatically generate PR. If the procurement type is E or X the system will generate plan order .
This configured in Plan order type LA means it should be for in house production E.
There are two ways of solving this. If you want always PR for FERT. Assign Proc type F in material master MRP view. It will always generate PR for that particular material.
Or
You can run MRP with planning mode 3 create PR in front screen.
Regards
J . Saravan

Problem in Purchase Requistion.

Similar Messages

Maybe you are looking for