Problem processing a UserDefined  Dimension

Hi, Everyone.
I am trying to process a UserDefined Dimension called product, i am getting the following error when i run a Full Process.
  - CubeProcess : OLE DB error: OLE DB or ODBC error: Invalid column name 'ID5'.; 42S22; Invalid column name 'STRAT_INDEX5'.; 42S22; Invalid column name 'SORT_ORDER5'.; 42S22; Invalid column name 'SIZE5'.; 42S22; Invalid column name 'PER_CASE5'.; 42S22; Invalid column name 'FILTER15'.; 42S22; Invalid column name 'CATEGORY5'.; 42S22; Invalid column name 'BRAND_ASSOC5'.; 42S22; Invalid column name 'BAT_NOBAT5'.; 42S22; Invalid column name 'ACTIVE_PROD5'.; 42S22; Invalid column name 'SCALING5'.; 42S22; Invalid column name 'HLEVEL5'.; 42S22; Invalid column name 'EVDESCRIPTION5'.; 42S22; Invalid column name 'CALC5'.; 42S22; Invalid column name 'SEQ5'.; 42S22; Invalid column name 'ID5'.; 42S22; Invalid column name 'STRAT_INDEX5'.; 42S22; Invalid column name 'SORT_ORDER5'.; 42S22; Invalid column name 'SIZE5'.; 42S22; Invalid column name 'PER_CASE5'.; 42S22; Invalid column name 'FILTER15'.; 42S22; Invalid column name 'CATEGORY5'.; 42S22; Invalid column name 'BRAND_ASSOC5'.; 42S22; Invalid column name 'BAT_NOBAT5'.; 42S22; Invalid column name 'ACTIVE_PROD5'.; 42S22; Invalid column name 'SCALING5'.; 42S22; Invalid column name 'HLEVEL5'.; 42S22; Invalid column name 'EVDESCRIPTION5'.; 42S22; Invalid column name 'CALC5'.; 42S22; Invalid column name 'SEQ5'.; 42S22.
Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'BPC_Bacardi', Name of 'Product' was being processed.
If i review the dimension in BIDS i notice that in the Edit Named Query in the tables definition i can not see the columns ID5, STRAT_INDEX5, ...., etc. even when those are in the tables and i get the same error if i run the Verify SQl in Edit Named Query.
Any clue about what is causing this problem? Thanks in advance.

These fields ID5, STRAT_INDEX5 etc. are coming from the MSAS dimension setup. In the DB schema, you'll see a table called dimProduct, which has fields for all your properties marked as InApp, repeated ID1, ID2... ID5... up to IDn, where n = number of levels in this dimension.
I don't know exactly why MSAS needs this to work, but it apparently does, and BPC takes care of all that for you -- when things are working properly.
I'm not sure why you get this error. You may be maxing out MS SQL server, if you have many properties, all InApp=Y, and also many levels in this dimension.
If you don't need all these properties InApp, consider removing some. It may make the dim processing faster, too.
Also, try processing the dimension with only one or a few members in it (so there are many fewer levels to deal with). If that works, start adding more levels gradually until the problem appears. That will at least pinpoint the cause, if not the solution.
And if none of that works, try to save your member sheet offline, then delete the dimension and re-create it. Maybe something got messed up for some temporary DB connection failure or something, and by just starting over fresh the problem may disapper.

Similar Messages

  • SSAS 2008 - How to get processing times per dimension / measure group?

    Hi experts!
    SSAS 2008. I am doing analysis and I'm trying to get information (from dmv or log) about processing times per dimension / measure group. Any ideas how to do that?
    Thanks,

    also in DMV there's no column recording the processing time, so we suggest you using SSAS AMO to programmatically get the state and last processed date time. Please see:
    Analysis Management Objects (AMO)
    Hi John,
    Thanks for you info, As
    Simon Suggested there is no DMV columns available.
    You can use below link for more information.
    Programming Administrative Tasks with AMO
    Cube
    partition attributes for last processed (timestamp and status)
    Thanks
    Suhas
    Mark as Answer if this resolves your problem or "Vote as Helpful" if you find it helpful.
    My Blog
    Follow @SuhasKudekar

  • I have tried to purchase Adobe Acrobat Professional XI this morning and payment (AED 1983.53) has been taken, I received a message stating there was/is a problem processing my order and that I should contact your customer service team in UAE.  Having trie

    I have tried to purchase Adobe Acrobat Professional XI this morning and payment (AED 1983.53) has been taken, I received a message stating there was/is a problem processing my order and that I should contact your customer service team in UAE.  Having tried this, I was met with a recorded message, in Arabic, and no options to speak to anyone.  I have found this process extremely frustrating and poor on your behalf.  Not providing any options to speak to an Adobe representative is equally annoying.  Please get back to me ASAP, as I need to use the product immediately.

    CS2 is very old and reached its "end of life" a while back.  So probably won't run on modern operating systems.  If you can still run it, you'll need to uninstall what you have and re-install with the download link below to activate it.
    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
    Nancy O.

  • How do i purchase license for lightroom 5? When i tried to process payment, it says There was a problem processing your order, please contact our Customer Service team on 800 448 1642 for assistance.

    How do i purchase license for lightroom 5? When i tried to process payment, it says There was a problem processing your order, please contact our Customer Service team on 800 448 1642 for assistance.

    In this forum, we can't help with purchasing issues.
    My suggestion is to call that phone number.

  • There was a problem processing your order, please contact our Customer Service team for assistance.

    when i waned to buy and finished filling all the (*), i clicked on conifirm membership they worte this in a red color:
    There was a problem processing your order, please contact our Customer Service team for assistance.Middle East & North AfricaBahrain: 80081097Egypt: 08000000447Jordan/Kuwait/Lebanon/Qatar/Yemen: English +44 207 365 0735Jordan/Kuwait/Lebanon/Qatar/Yemen: Arabic/French +44 203 564 4145Oman: 80077173Saudi Arabia: 8008446638Tunisia, Morocco and Algeria: +33 157324642United Arab Emirates: 80004443085Commonthwealth of Independent States (CIS): +44 207 365 0735

    Asmaa,
    Other than using the suppport phone number, you may try a chat here:
    Creative Cloud support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • When i waned to buy and finished filling all the (*), i clicked on conifirm membership they worte this in a red color:  There was a problem processing your order, please contact our Customer Service team for assistance.Middle East

    when i waned to buy and finished filling all the (*), i clicked on conifirm membership they worte this in a red color:
    There was a problem processing your order, please contact our Customer Service team for assistance.Middle East & North AfricaBahrain: 80081097Egypt: 08000000447Jordan/Kuwait/Lebanon/Qatar/Yemen: English +44 207 365 0735Jordan/Kuwait/Lebanon/Qatar/Yemen: Arabic/French +44 203 564 4145Oman: 80077173Saudi Arabia: 8008446638Tunisia, Morocco and Algeria: +33 157324642United Arab Emirates: 80004443085Commonthwealth of Independent States (CIS): +44 207 365 0735

    Verify that everything about your Adobe ID and your country and your credit card match exactly
    Change/Verify Account https://forums.adobe.com/thread/1465499 may help
    -http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html
    -Credit card https://helpx.adobe.com/utilities/credit-card.html
    -wrong email https://forums.adobe.com/thread/1446019

  • I can't renew my plan. It always say"There was a problem processing your order, please contact our Customer Service team on 30714922 for assistance."

    I can't renew my plan. It always say"There was a problem processing your order, please contact our Customer Service team on 30714922 for assistance."
    I can't find my payment info and renew button. Please help me!

    In this forum, we can't help with purchasing issues.
    My suggestion is to call that phone number.

  • Problem with a multisourced dimension

    Hi Guru's
    I have a problem with a multisourced dimension. Some of the values that are in the tables are not visible when I create a filter and choose all choices, but when facts are set against the dimension these values do show.
    This is the situation: In my physical layer I've got 3 tables that are all pretty similar, structure is like year, quarter, amount. From these three tables I create 3 fact tables and 1 dimension, where the dimension is YearQuarter with two columns (year and quarter) and 3 sources. One of these tables has a quarter 0 (zero). The DimYearQuarter table is innerjoined in the BMM wit all 3 facttables. Changing to right or left outer doesn't change the results.
    In answers when i create a report just with the dimension columns , quarter 0 is not visible. When the measure (where the quarter 0 associated to) is added to my request it shows the values for quarter 0. When applying a filter, the quarter 0 is not visible with "all choices", but a filtercondition works with Quarter is equal to 0.
    Any suggestions are kindly appreciated. If more info is needed, I'm very willing to provide.
    I'm on 10.1.3.4.1 on windows server 2003 (server side) and XP professional as a client.
    Kind regards,
    Gilles

    You should alias the physical tables such that you can then physically join the aliases one to another. Then you should be able to use the dimension table on it's own - for prompting purposes and such.
    (Aliasing of physical tables is an OBI best practice)

  • I'm unable to make payment for creative cloud monthly plan. It says there is some problem processing the payment. I tried with three different cards. Still not working

    I'm unable to make payment for creative cloud monthly plan. It says there is some problem processing the payment. I tried with three different cards. Still not working

    "Some problem" is really not much information
    Some links that may help
    Change/Verify Account https://forums.adobe.com/thread/1465499 may help
    -http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html
    -Credit card https://helpx.adobe.com/utilities/credit-card.html
    -ID support http://helpx.adobe.com/x-productkb/global/service-c1.html
    -wrong email https://forums.adobe.com/thread/1446019

  • What's the Point of the 'Report a Problem' Process?

    I tried out the 'report a problem' process for the first time, as I bought an app that basically didn't do anything it was supposed to.
    I tried to contact the app support via the link in iTunes, got nowhere, so I tried the recommended 'report a problem' process.
    This also was a complete waste of time, as all it does is generate a message from Apple saying 'we have noted your comment but we have no control over apps. Please seek advice through the support link in the app page in iTunes' or words to that effect.
    Complete waste of time and going round in circles.
    So, are we saying that, if the app support is ignoring any requests for a refund and Apple obviously don't want to know, there is no way to get any money back on apps that just don't do what they are supposed to?

    Sorry Ian, but Apple did not tell me that. I have never asked for a refund, because there is no apparent mechanism for doing so.
    I cannot see anything in the link you provided that is relevant to the issue in question.
    I am struggling to see why the situation with buying an app that is 'unfit for purpose' from the App Store is any different if I buy a pair of Levis from the Jeans Store that is 'unfit for purpose' because there is a leg missing.
    The shop will not wash their hands of it, and tell me to go and sue the manufacturing factory whose responsibility it is. They would give me a refund, as it is them that I have a contract with and not the manufacturers.
    That is basic Consumer Law - certainly in the UK.
    Someone who purchases from the App Store is buying from Apple, not the developer, and it is Apple that the consumer has the contract with. Simple as that.
    Even if what you were saying was correct, what mechanism is there for devs to give refunds? Have you tried to get any support for apps in the App Store? My experience is that most of the time, it is zero. Now, of course, we all say, 'oh well, it was only a pound or so', and move on, but it still begs the question.

  • HP 6100 printing problem: process pdftopdf consumes huge amounts of RAM

    I did some remote troubleshooting for my uncle's Mac yesterday who had a problem with his MacBookPro. It occured to him last week after trying to print a document with his HP 6100.
    When I tried to check the problem, the system UI took at least 15 seconds to register a user action. The Activity Monitor showed that the process pdftopdf consumed more than 2 gb of RAM and continued to do so after a restart. The system was practically unusable. As a temporary solution, I killed to process manually and deinstalled the printer drivers. I did not reinstall the drivers in order to avoid the same problem over and over again.
    It was a machine that came originally with Snow Leopard (so no upgraded system from Leopard), which was system-wide up-to date.
    Is there any "official" solution regarding this issue that seems to be known for a whole year (see e.g.: http://discussions.apple.com/thread.jspa?messageID=11004321)? In that thread someone suggested that the problem might be related to CUPS. So is it up to Apple or to HP to fix it?
    Please help, thx.

    Hello Scheepster, I have ProBook 4340s and I'm having trouble with suspend to ram. When my laptop wakes from suspend it fully hangs after some time. Sometime is 2-3 seconds later and sometime is 20-30 minutes later. I think this two models (4340s and 4540s) are not very different, so would you tell me do you experiencing SUSPEND problems.

  • Problems processing a large batch of data within a Weblogic 5.1 cluster

    I have about exhausted my sources of information on this, so I ask the
              experts:
              The project I am involved with is attempting to build a scheduled
              process on a 5.1 cluster which will retrieve hundreds to thousands of
              database rows from a small group of Oracle tables and then submit them
              into a legacy system for processing. The problems we face are:
              1. We cannot have duplicate data submitted from startup classes on
              different servers in the cluster
              2. We need the process to run if even only one machine in the cluster is
              available and therefore do not want to tie the process to a single
              machine
              3. We would prefer to distribute the workload across all servers
              currently available in the cluster, but this is not mandatory.
              One solution is to retrieve each record as an Entity bean, attempting to
              update it to "in process" and rejecting any failures thus utilizing
              database locking, but due to the large number of records being processed
              this is much too resource intensive as well as time consuming.
              We have looked into JMS based solutions, but it appears that JMS under
              5.1 is tied to a specific server (failing case 2).
              One acceptable approach that we have yet to find a way of implementing
              is to have a "singleton" session bean, only one of which exists on the
              cluster (though it may exist anywhere on the cluster). I have run
              across a number of other applications for just this sort of EJB, but is
              it possible to implement?
              Sadly, Weblogic 6.0 cannot be part of the solution as our company will
              not be adopting it until well after this project's delivery date.
              Are we missing something obvious?
              Many thanks!
              -Steve
              

    You have to have all the servers in the cluster polling for work out of the
              database. Use the database as a scheduling / routing mechanism. Use timers
              on each server in the cluster to kick off a "find me one thing to do"
              process every n minutes or seconds.
              Peace,
              Cameron Purdy
              Tangosol, Inc.
              http://www.tangosol.com
              +1.617.623.5782
              WebLogic Consulting Available
              "Steven Wicklund" <[email protected]> wrote in message
              news:[email protected]...
              > I have about exhausted my sources of information on this, so I ask the
              > experts:
              > The project I am involved with is attempting to build a scheduled
              > process on a 5.1 cluster which will retrieve hundreds to thousands of
              > database rows from a small group of Oracle tables and then submit them
              > into a legacy system for processing. The problems we face are:
              > 1. We cannot have duplicate data submitted from startup classes on
              > different servers in the cluster
              > 2. We need the process to run if even only one machine in the cluster is
              > available and therefore do not want to tie the process to a single
              > machine
              > 3. We would prefer to distribute the workload across all servers
              > currently available in the cluster, but this is not mandatory.
              >
              > One solution is to retrieve each record as an Entity bean, attempting to
              > update it to "in process" and rejecting any failures thus utilizing
              > database locking, but due to the large number of records being processed
              > this is much too resource intensive as well as time consuming.
              >
              > We have looked into JMS based solutions, but it appears that JMS under
              > 5.1 is tied to a specific server (failing case 2).
              >
              > One acceptable approach that we have yet to find a way of implementing
              > is to have a "singleton" session bean, only one of which exists on the
              > cluster (though it may exist anywhere on the cluster). I have run
              > across a number of other applications for just this sort of EJB, but is
              > it possible to implement?
              >
              > Sadly, Weblogic 6.0 cannot be part of the solution as our company will
              > not be adopting it until well after this project's delivery date.
              >
              > Are we missing something obvious?
              > Many thanks!
              > -Steve
              >
              

  • Journal Problem with Replicating another dimension on User Defined

    Hi experts,
    A curious thing is happing on development, I follow the HTG "SAP Business Planning and Consolidation for NetWeaver - Journals.pdf"; and this generate fine the journal, but when I was testing, doing a simple journal entry, a trouble occurred, the template has the structure below:
    Header:
    Category
    Time
    Group
    Row:
    DataSrc
    Entity
    Account
    Intco
    Flow - SubTable
    CLucro - User Defined
    CCusto - User Defined
    So when I fill all the information to every dimension and put the amount, I save, and don't get any error message, but on CLucro and CCusto appears the value of flow, and if I consult the Infocube on listcube I get this dimensions in blank.
    Fonte Empresa Conta        TipMov CLucro CCusto IntCo Remark Debit     Credit
    AJUSTE 1161 PC011101010001 BLK BLK BLK C1161                      100
    AJUSTE 1161 PC013604030001 BLK BLK BLK C1161       100
    Does anybody know what could be ? Journal can't has user defined dimension ?
    Best Regards
    Alexandre Mendoza Collepicolo

    Hi Ethan,
    I'm on BPC version NW 7.5 SP04. The HTG is on this link:
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/00497d6a-0f38-2d10-bfb5-d50b91c9c0e5
    I'm with the same problem related by M. Weisheit on this thread
    Re: Journal entry disappear
    Someone knows what could be ?
    Best regards

  • Problem processing an ELExpression

    Hi I am having a problem with a custom tag whereby it is not processing an EL Expression within a javscript call, but I dont understand why surely when the page gets rendered by the jsp it does all the conversions without regard for javascript.
    This is a cut down version of my tag
    <%@ tag body-content="empty" %>
    <%@ attribute name="sortfield" required="true" %>
    <%@ attribute name="title"     required="true" %>
    <%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>
    <%@ taglib prefix="fmt" uri="http://java.sun.com/jsp/jstl/fmt" %>
    <%@ taglib prefix="fn" uri="http://java.sun.com/jsp/jstl/functions" %>
    <th class="list_header"><a href="javascript:setFields('${sortfield}.asc')">${sortfield}${title}</a></th>        This is where by jsp calls the tag
    <mytag:listheading sortfield="name" title="Name"/>  And this is the output
    <th class="list_header"><a href="javascript:setFields('${sortfield}.asc')">nameName</a></th>   As you can see sortfield is rendered as name in one place but left as sortfield in another, any ideas please ?

    Ok the problem is the single quote which JSP assumes is the start of a string literal so you have to change the ' to the html charctercode so ignored by the jsp
    as using ampersand#039; instead of a '

  • Incremental partition processing with changing dimensions?

    today i tried out an incremental processing technique on my cube. I have a partition by date which had 100 rows and an account dimension which had 50 rows.
    i executed a process full and then added 10 rows to the fact and modified 2 rows in the dimension as well as adding 10 rows to the dimension...
    i imagined that I could just do a process full on the dimension and process update on the partition, but upon doing that my cube was in an "unprocessed" state so i had to perform a process full...is there something i did wrong or do updates to dimensions
    require full rebuilds of all partitions?
    this was just an example on small data sets. in reality i have 20+ partitions and 500m rows in the fact table and 90m in the dimension.
    thanks in advance!
    Craig

    ".. i imagined that I could just do a process full on the dimension and process update on the partition, but upon doing that my cube was in an "unprocessed" state so i had to perform a process full .." - try doing a ProcessUpdate on the dimension
    instead. This paper explains the difference:
    Analysis Services 2005 Processing Architecture
    ProcessUpdate applies only to dimensions. It is the equivalent of incremental dimension processing in Analysis Services 2000. It sends SQL queries to read the entire dimension table and applies the changes—member updates, additions,
    deletions.
    Since ProcessUpdate reads the entire dimension table, it begs the question, "How is it different from ProcessFull?" The difference is that ProcessUpdate does not discard the dimension storage contents. It applies the changes in a "smart" manner that
    preserves the fact data in dependent partitions. ProcessFull, on the other hand, does an implicit ProcessClear on all dependent partitions. ProcessUpdate is inherently slower than ProcessFull since it is doing additional work to apply the changes.
    Depending on the nature of the changes in the dimension table, ProcessUpdate can affect dependent partitions. If only new members were added, then the partitions are not affected. But if members were deleted or if member relationships changed (e.g.,
    a Customer moved from Redmond to Seattle), then some of the aggregation data and bitmap indexes on the partitions are dropped. The cube is still available for queries, albeit with lower performance.
    - Deepak

Maybe you are looking for