Problem setup with DB Live Value and win 9

Hi
I try to clean an old PC with win 98 SE and a SB Li've Value (CT4830) but I have lost the original CD but I found
the last upgrade on creative site (sblw9xup.exe).
But when I launch sblw9xup.exe , it says that it recognizes no sound blaster card and exit
I have tried to change the the PCI slot in the PC but it is the same thing.
Now the detail when I start windows:
- First I have a windows that says (I translate): New device detected, I am looking for new driver for PCI Early
non-VGA Device
- Then news windows to install a driver for this devi've. It doesn't work but probably it is normal.
- Then I have a windows that says (I translate): New device detected, I am looking for new driver for PCI Input
controller
- Then news windows to install a driver for this devi've. It doesn't work but probably it is normal.
Then I launch sblw9xup.exe and it says that it recognizes no sound blaster card and exit
Have you an idea ?
Thanks

Part
http://www.megaupload.com/?d=24B0A8F
Part2
http://www.megaupload.com/?d=24YEBDV
Download both part and 2 to the same folder and then unrar and burn the ISO.

Similar Messages

Undocumented problem solved with 16-bit pcmcia and irq error

I am having the exact same problem as described in the following post:
"Undocumented problem solved with 16-bit pcmcia and irq error."
"I'm using a DAQ Card (AI-16E-4), which didn't work properly in MAX. MAX complained that the card didn't respond to an interrupt request.
I've had this issue for a while, but dropped it, since NI support told me nothing could be done about it. Meanwhile, a seemingly unrelated problem with a wireless pcmcia network card arose. Cisco had no clue what was wrong with their card either, but I found Microsoft Knowledge Base Article Q327947. It seems that Win2k (they claim SP3 and up) disables ISA to PCI routing, which is what causes this problem.
To fix it, open regedit
and navigate to "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Pcmcia\Parameters"
edit or create the DWORD value "DisableIsaToPciRouting" and set the value data to 0.
See Microsoft's article for further details: http://support.microsoft.com/default. aspx?scid=kb;en-us;327947"
The difference is that I am using WinXP and the Regedit fix does not solve the problem. Does anybody know how he was able to continue to use the card before he solved the problem? The card works fine in MAX, but errors out in LabVIEW.

Hey Willy,
Here some additional suggestions that have corrected some PCMCIA difficulties in the past besides the registry edit you suggested.
1. General Troubleshooting to Verify Correct Hardware and Software Installation
Uninstall the PC Card hardware through Device Manager
Remove the PC Card from the laptop
Uninstall the NI-DAQ software
Follow the normal installation instructions (the most important step to remember for Plug-n-Play Operating Systems is to install the software first)
Try the latest service packs for Win 2000 or Win XP
Try the PC Card in a different laptop
Try a different slot in the laptop. On certain laptops PC Cards have been successfully installed in the top PCMCIA slot instead of the bottom.
2. Additional Troubleshootin
g for PC Cards that Return IRQ Conflicts
For E-Series DAQCards:
Update to NI-DAQ 6.9.3 first and then update NI-PAL to version 1.6.1 (included exe file).
Download the attached NI-PAL (ni-cdu1610.exe), and run the installer. When receiving the error "The device is not responding to the first IRQ Level" in Measurement and Automation Explorer, try this method of upgrading NI-PAL
3. Additional Troubleshooting Steps
Try disabling the 3COM adapter, and any other extraneous (for now) devices like any built in serial and parallel ports. The best way to do this is probably to disable them in the BIOS. If the PCMCIA card works properly then try to reconfigure disabled devices one at a time.
Make sure the latest BIOS is installed.
Check for any unusual PCMCIA drivers or other software that might interfere with the PCMCIA driver.
I hope this helps.
Ron
Applications Engineering
National Instruments
Attachments:
ni-cdu1610.exe ‏1557 KB

HT4137 iCloud setup with one Apple ID and multiple devices

iCloud setup with one Apple ID and multiple devices

What, exactly, are you trying to do? You can use the same iCloud account on as many devices as you want, as long as you don't turn on iTunes Match. Once you turn on Match, you're limited to 10 devices total.
Is this what you want to do...same iCloud account, but different iTunes/App store accounts on each device? If so, you can do that also.

Report with goods receipt value and invoice posting value

Is there any standard report with goods receipt value and invoice value (the value with which invoice is posted.

Hi
Please check MC$4 transaction, mey be helpful.
regards
Srinivas

MOVED: [Athlon64] Failed Bios update with both Live Update and Dos version = badchecksum shutdown

This topic has been moved to AMD64 nVidia Based board.
[Athlon64] Failed Bios update with both Live Update and Dos version = badchecksum shutdown

Sometimes bios recovery is a long shot .
But the award bios v.6 is supposed to be able to do it if the bootblock is still intact.
Best way seems to be to strip it down to minimal configuration , disconnect all drives except floppy , one ram module , perhaps without video card also .
Look here :
http://pages.sbcglobal.net/jefn/bootblock.html

Is Firefox compatible with Window Surface Pro and Win Phone 8

Is Firefox compatible with Window Surface Pro and Win Phone 8

A user posted here the other day who is using a Surface Pro 2, with Windows 8.1, so that should work basically the way it works on a desktop or laptop.
Windows Phone, I don't think so.

How to create a PDF with substituted key-value and table-values using a template language

I have about 50 key-values and 10 table-values that I want to substitute into a formatted report template (language can be anything standard, would create a small number of these templates) and then use an Adobe tool to substitute the values into the template and produce a PDF. Preferably the template language would permit some basic conditional logic (if <key #> has value <value> then <show key label here> and <key value here> in close spatial proximity on the form) and permit embedding of a static graphic logo, text with fonts/styles, etc. to produce a polished report but also handle pagination (e.g. enable page breaks or numbering) to be handled automatically.
What is a recommended template language and product to accomplish this?

Are you thinking of something like a blank form that you can enter information into, save, and send to another user? If so, what you want is possible. If you want more information, post again and include more details about how you want to use it and how the recipient will use it.

HELP! Package with orange, registration problem, setup wizard pages not found and email problems!

I got my blackberry 2 days ago (I'd never had one in the past) and the sales advisor told me I would need the 'blackberry package' for £5 a month and being the fool that I am I agreed without asking for more information on what it included etc. I can get on the internet using my home wifi or any other free wifi connection I happen upon, but cannot use applications such as Facebook for Blackberry without being confronted with a message claiming 'You are currently on a service plan that does not support this application. Please contact your service provider for additional information or to upgrade your current service plan.' I had thought that the package I had been given would be for this, does anyone know how long it should take before the package is activated?
Also, when visiting www.blackberry.orange.co.uk and asked to give my PIN and IMEI it claims that it is currently registered with a different service provider. Has anyone else found this or know a way to fix it?
Actually, while I'm here, when running the setup wizard a lot of the pages come up with HTTP ERROR, PAGE CANNOT BE FOUND and when attempting to set up my email I only have the options to 'i want to use a work email account with a blackberry enterprise server' or 'i want to skip email setup'. How would I set up a hotmail email account?
Message Edited by hayley_rose1989 on 02-07-2009 06:53 PM
Message Edited by hayley_rose1989 on 02-07-2009 06:54 PM
Message Edited by hayley_rose1989 on 02-07-2009 06:55 PM
Message Edited by hayley_rose1989 on 02-07-2009 06:58 PM

the blackberry package is a good thing. the problem is that is seems you have had problems creating your BIS Account. Call Orange UK hotline and explain your issue. It's their job to make everything work. especially since you are a new customer.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Problem with SB Live! and KX in using EAX

Hi,
i got a Problem with my SoundBlaster Li've!.
I use the KX-project driver (Version 3538g) and have a problem with EAX support in Counterstrike. When I turn on EAX support in cs everything seems perfect, but the sound thats 3-dimensionally seen coming from behind me sounds bassless. It sounds as if I hadn't installed a sound driver, that means without bass and it's very quite.
The sound thats coming from the front and the side is perfectly ok, but the sound from behind me sounds like trash.
I have also tried it with the original Creative drivers but then it's the other way around, the sound coming from the front has no bass and sounds like no driver was installed and the sound coming from the back is way too loud and the bass is so uncomfortably intensi've that its hard to play this way longer than 0 minutes ...
Hope u can help me.
P.S.: The Headset with which I play is the Speedlink Medusa 5. Headset.

marcmarc wrote:
Hi,
i got a Problem with my SoundBlaster Li've!.
I use the KX-project driver (Version 3538g) and have a problem with EAX support in Counterstrike. When I turn on EAX support in cs everything seems perfect, but the sound thats 3-dimensionally seen coming from behind me sounds bassless. It sounds as if I hadn't installed a sound driver, that means without bass and it's very quite.
The sound thats coming from the front and the side is perfectly ok, but the sound from behind me sounds like trash.
I have also tried it with the original Creative drivers but then it's the other way around, the sound coming from the front has no bass and sounds like no driver was installed and the sound coming from the back is way too loud and the bass is so uncomfortably intensi've that its hard to play this way longer than 0 minutes ...
Hope u can help me.
P.S.: The Headset with which I play is the Speedlink Medusa 5. Headset.
http://www.driverheaven.net/forumdisplay.php?f=67
jutapa

Black Screen with a live cursor and Please Wait Freeze

So after having my computer remove internet functionality when I did some HP updates I System restored back before them fixing the issue. Now though, it continues to give me Please Wait then freezes for about 6-8 minutes, and it will finally go to the log in screen but after sliding the main image and screen back to get to the log in it gives me Please wait for another 6-8 minutes. Once I get to the log in screen it freezes momentarly and then it allows me to log in. After clicking submit or enter it will freeze on Welcome for a long while, the time is not consistent, and once it gets to the desktop it is black, the pixels are live but just not changing. The cursor is also live and working but there is nothing to click. The windows buttons do not work to get to the tiles with everything on it. I have tried to restart it about 7-8 times but it just continues to freeze. After about 30 minutes of being on black screen the desktop bar loaded but it isn't loading fully. CRT, ALT, DLT, works but Task Manager doesn't load. If I relock it restarts the black screen process. Anyone know how to fix this?

Hi,
Have you tried running a hard drive test on the computer?
To run the Hard drive diagnostics you need to Tap Esc as soon as you Power on the notebook. It'll show you the Startup menu. Select F2 and run hard drive quick test and let me know what happens..
Testing using HP PC Hardware Diagnostics : Testing using HP PC Hardware Diagnostics (UEFI)
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

Rewire with Ableton Live 8 and Logic Pro 9

Hi guys,
I'm really hoping that somebody can help me with (sorry) a Rewire problem...I am close to tearing my hair out.
I'm trying to Rewire Logic Pro 9 and Ableton Live 8. Before you ask I am using 32-bit Logic, and I am opening up Logic first, then Ableton but I can't seem to get the Ableton Live Rewire channels to appear in the Logic library.
Please help if you can, I'm going steadily insane. Such a waste of my time having to sort this rubbish out.
Cheers!

Hi
Did you run Live without Logic running to get Live to install the necessary Rewire bits and pieces?
You will then need to quit, Live, start Logic start Live.
CCT

LOV problem ... returning display-value and not key-value

Hi. Sorry for my broken English.
I have a problem with pop-up dynamic LOV.
I have a simple form called Form A containing item_code and item_name. Users can create, update and delete new item by using this form.
Another form called Form B has a field called item_code, and the item_code field is a dynamic pop-up LOV field and a query for this LOV is like this;
select item_name d, item_code r from item_master order by item_code;
When i create the new record in Form B and use LOV to find and get the item code, LOV works fine
and it returns key-value to the item_code field.
But when i try to update the record (I have a link from report page to Form B), value of the item_code field is not the key-value from LOV, but is a
display-value from LOV.
Any ideas?
Thank you.

Well, from what you have described, this is working exactly as it should. Form B's LOV is intended to retrun the key value but should show the dispaly value. When you go from the report to the form, the key value is being passed (or should be depending on your code) and Form B ought to show the display value.
So, in short, I would say that Apex is doing what it should. Unless I misunderstand something.
Bruce

Sb live value and dos games

i can't find any dos utility that is supposed to be in the creative sblaster li've value installation cd. i've just downgraded my os recently from win2000 to win98SE just to re-li've the glory of dos games again that started the whole evolution anyway...but there's no sound and the games can't detect my sb li've? anybody got any clues ?

Hey, sunburst_ivan,
You may not like to hear this. You can search around and get the old dosdrv folder and st it up with dos cdrom drivers, dos mouse drivers, and run it either from a boot disc or by specifying a new Ms-Dos configuration in the game's property's Program tab. These are better solutions than the way the Li'veWare setup does it because the dos drivers won't be loading all the time with Windows and possibly conflicting. The Ali've! site used to have an article with a link to them, and I think driverguide.com has them as well. You can also find a driver set there that is the last vxd set provided in Li'veWare 3.0 that included good dos within Windows drivers. (Just go into device manager and check the box to allow LPT Interupt Sharing to avoid conflicts.)
But, by all means consider that all the hastle is not worth it or necessary in order to play your old games. You can now use any soundcard and Windows XP and play nearly all old dosgames perfectly. Nothing wrong with the Li've! cards. You can use the Li've Uni-Pack driver or the kXProject drivers depending on what you want the card's emphasis to be. (kXProject if you don't mind no EAX, the official drivers for ease of use and still pretty good sounding music.) And, as I said you are not limited to just the Li've! this way. Any newer (better) card will work too.
Lots of information can be found on the vogons.zetafleet.com website. (VOGONS-Very Old Games!) Dosbox with the D-Fend frontend (GUI), and vdmsound are all you need. Use vdmsound if the game works to your satisfction with it. If not, then as far as the games are concerned when running within the Dosbox program they are on MS-DOS 5.0 with nearly any soundcard, video, mouse, joystick, memory configuration they require. It is emulating the whole computer and hardware and drivers, etc. for you with no fuss on your part. Games think they have 640K conventional memory! (There's a box to check in D-Fend to limit this if the game thinks this much memory is impossible and refuses to run.)
So, do what you will. I think you'd spend less time tinkering and more time playing by doing it my way.

Is it possible to have a dual screen setup with an iMac (2012) and an iMac (mid 2007)?

Hello Everyone,
I have two iMacs. One is a 2012 model and the other is a mid 2007 model. Would I be able to use the mid 2007 model as an extra monitor?
I was going to purchase a mini dvi to mini display port cable and see what happens but I think it would be a good idea to see what everyone else thinks. Thanks for any suggestions!
- Nolan

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
I am thinking that won't work. The older iMac's video port only goes on direction - out. It won't take the signal from the newer iMac. You might be able to do something with this software;
http://www.screenrecycler.com/ScreenRecycler.html

After installing Mavericks, I have intermittent problems working with Wacom Intuos 4 and bluetooth keyboard.

I use Photoshop extensively with a Wacom Intuos 4 and Apple bluetooth keyboard, and have had no problems (as below) before.
Each time I use the tablet, the keyboard gets intermittently unresponsive, and it will only respond again after I tap the tablet pen on the tablet. And sometimes after repeatedly tapping the pen on the tablet.
It gets so frustrating as I use the keyboard to change Photogshop tools etc, and everytime it doesn't response I have to do the tapping again.
Appreciate some sharing of solutions, if any.
Thank you.

I'm having the same issue and its very frustrating.
I use Photoshop and Flash heavily at work, but can't use my wacom at all anymore because:
its seems Shift gets stuck and everything becomes highlighted
shortcut keys won't work
when I drag out rectangle shapes the corners automatically become curved and eventually my rectangle becomes a circle
I will click on a keyframe and the actions panel will automatically pop up
when I try to move objects they duplicate.
More things happen but those are the ones I can think of off the top of my head. When I switch to a regular usb mouse the issues don't occur. I've tried uninstalling the driver and reinstalling and the issues still occur. Its completely slowed down my productivity and is starting to hurt my wrist now :\
Nice to know that someone else has a similar problem at least. Hopefully apple or wacom will come out with a fix soon.

Problem setup with DB Live Value and win 9

Similar Messages

Maybe you are looking for