Problem to unbolt my Blackberry continuation has a putting has in the daytime

Hello, I have make a putting has in the daytime of my Blackberry curve 9300 has the assistant of the BlackBerry software desktop software, and since impossible to serve again to me of my telephone because I cannot unbolt him any more. As soon as I light him, my telephone posts: " the mobile terminal is vérouillé " and I have three options: unbolt urgency and cancel. Only when I click to unbolt nothing takes place, I cannot enter my password.

Hi and Welcome to the Community!
I recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Problem: Video on slide one continues to play and can be heard in the background, even after the user has navigated to another slide.

Problem: Video on slide one continues to play in the background, even after user has navigated to another slide. This only happens on a fresh reload of the page.
Has anyone else had this problem, or found a solution?
If you refresh the page and start over, the problem doesn't happen. But on the first page load it always seems to happen.
Here is a link to the module I am working with. If you let the video play for a couple seconds on the first slide, and then click a navigation link to another slide, you will still hear the audio from the first slide playing.
http://www.thepettitgroup.com/tn/module_01_unit_01A/multiscreen.html

To clarify - this happens in both IE and Chrome, and is the Flash version of the content.

Problems with a nuked Blackberry

Hi there,
I, like many others, am having problems with my nuked blackberry 9300. It is always in a reboot cycle, can't get in to the device, nothing. I've tried following the steps for restoring using AppLoader but most of these help posts tell you to press 'next' as soon as USB-PIN : UNKNOWN comes up, but whenever I connect my device it always displays my pin, and not that the pin is unknown. What do I do when this happens?
Thanks!

Continue to the next step...if it recognizes your device, you should be able to continue.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problems with Verizon Wireless BlackBerry Tour BlackBerry OS 4.7.1.61 update:

Problems with Verizon Wireless BlackBerry Tour BlackBerry OS 4.7.1.61 update - I was anxious to download the update to see if it addressed the sticky trackball problems and the low volume issue when using a blue tooth device. However, in the process of updating my BB Tour yesterday, the install stopped on the 8th out 12 updates. After a couple of 'retrys', the BB error message on the desktop came up which instructed me to: i) disconnect the device, ii) restart the computer. iii) restart the loading process and, iV) restore my data by loading the loader back-up file using Restore. Unfortunately my Tour was left without any software and the Desktop manager couldn't recognize it. The error message on the Tour was 503. Called Verizon Wireless tech and bottom line, the only fix is a new Tour, which they're sending me. Anyone else having issues with the update? Also, does it address the trackball and blue tooth issues?

I had issues with the trackball and had to have my Tour replaced. I was told this model does not have a removable trackball so the entire phone has to be replaced. My current one is working OK but does stick a bit. Seems to get worse over time. My wife's tour is newer and so far she is not experiencing the problem. Have not experienced a problem with the Blue Tooth volume.
I have another issue with this upgrade that I am wondering if anyone else has seen. My wife has the Tour as well. She was prompted to do the upgrade and went through it. It appeared to work except it blew out her Contact Alerts. When we put them back in we can no longer get the sound to play when she receives an SMS message in her holster. Vibration works but doesn't do any good when it is in her purse. Phones calls, calendar alerts, alarms all work in holster. As soon as we delete the contact alert the default SMS alert will play in the holster. If she takes her phone out of the holster the Contact alert will play. My phone is still running 4.7.1.40 and this function works fine. I am thinking about trying to put her's back to my version if possible but not sure the best way to go about this

Blackberry software has stopped working

I have a Pearl 8120 with software version v4.5.0.182 platform 2.7.0.106 with Blackberry Software 6.1.0.35 on a Vista laptop.
I have been syncing my Pearl with Outlook for a long time. Earlier this week, I received an error right at the end of the sync (as it is moving data to the device) which said "Blackberry Desktop Software has stopped working". I have been troubleshooting every since. I can get it to successfully sync if I delete the intellisync folder or reinstall the software. However, the problem returns on the next sync. So, now, unless I delete the intellisync folder, it errors out before the sync completes (this is always happening after it reconciles and asks if I want the changes to occur. Here are the things I have tried:
1) did a hard restart on the blackberry (removing battery)
2) freed up memory on the Blackberry - moving media files to the memory card
3) repaired the Blackberry software
4) did a complete uninstall of the software and reinstalled
5) ran a log and tried editing the last outlook appointment
6) ran scanpst.exe and scanost.exe
7) did a one-way sync from outlook to the device
8) deleted the intellisync folder (multiple times - works the first sync, fails after that)
I have not changed anything on the Blackberry or the Blackberry software that I know of. The pc is a work pc, and so there could have been an update to the o/s or other program that could have been applied (they would not be applying any blackberry updates). I am getting very frustrated trying to figure out what is going on. Any help would be appreciated.
Thanks

http://www.blackberry.com/btsc/KB02206
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

My Aperture 2.1 has gone into a continual thumbnail mode. I left the computer, a MacBook Pro, run all night, about 12 hours and it is still making thumbnails. I tried reloading Aperture 2.1, but that did not change anything. I have also turned the syst

My Aperture 2.1 has gone into a continual thumbnail mode. I left the computer, a MacBook Pro, run all night, about 12 hours and it is still making thumbnails. I tried reloading Aperture 2.1, but that did not change anything. I have also turned the system off, for a period of time, and then turning it back on, when I click on Aperture, it comes up and locks in the thumbnail mode. I can view my stored pictures, even modify them, but it still says thumbnails.
I got in this mode by trying to import "one jpeg photo", from a scanned slide using a Nikon Scan4 IS5000ED scanner. I had saved the scan to my desktop before I tried to import it.
Please Help, Maurice A Bird at [email protected]
Thanks

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Sync Problem with Outlook and Blackberry Calendars

I am hoping someone has an "easy" solution to this problem.
I am using Desktop Sync (BIS) and synching it to my work Outlook 2007 mailbox.
Normally my calendar entries should sync to the Blackberry calendar associated with my work email address. Somehow, over the course of the past several days, some of my syncing was occuring with the the VZW Blackberry calendar. I didn't catch the problem in time and now I have work calendar entries correctly listed on my Blackberry, but in two different calendars.
I have since lost some of those entries originally created in Outlook. They are on the Blackberry, but on the wrong Calendar. When I sync with Desktop, the work entries on the VZW Calendar are not getting over to Outlook.
So the question is - is there a way to "move" the entries in one BB calendar, over to the other calendar? Thanks.

I would love to know the answer to this problem as well. I had the same problem even when I downgraded back to 5.0. It always worked fine before. Very Frustrating. To get around it clearing out all the settings on my handheld. I just have to click no every time it asks if I want to clear all databases on the phone before sync. It still syncs but doesn't change my settings. Annoying but works until they get this aggravation fixed.

Hey, I'm trying to install Adobe Flash on my Macbook Air. At a certain point it asks for my password but it doesn't take it. So I cannot continue installment. I have reset my password already. Still the same problem. How can I continue to install when it

Hey, I'm trying to install Adobe Flash on my Macbook Air. At a certain point it asks for my password but it doesn't take it. So I cannot continue installment. I have reset my password already. Still the same problem. How can I continue to install when it keeps asking for a password it doesn't recognize over and over again? How many times do I have to reset it then? Advice please

You have to provide your computer's administrator password in order to install Flash Player.

HP Photosmart C7280 All-in-one problem printing. Ink System Failure has failed unable to copy--

I'm having a problem printing on my HP Photosmart C7280 All-In-One. The following message is what came up on the printer screen: Ink System Failure has failed unable to copy, receive faxes or print. Refer to printer documentation Error O.cl9a0007.
Does anyone have any suggestions?
This question was solved.
View Solution.

Hey Spider! First off welcome to the forum.
I would recommend removing all the ink cartridges, unplugging the USB cable from the computer that connects to the printer, and then shutting the printer off completely by removing the power cord. Then restart your computer. Turn the printer back on but leave it disconnected from the computer. After it has finished its power on cycle go ahead and insert the ink cartridges back into the printer and be sure to seat them properly.
After you have all the cartridges back in the printer properly then connect it to the computer. See if this resolves the issue. If not post back with any findings.
Thanks,
SeanS
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error.

I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error. "Failed to Continue Activity" Cocoa Error 4609. Handoff is working for phone calls and text messages. By email just crashes each time. It was also doing it under 8.0.2. My iPhone and iPad handle this fine. It's only the MacBook to the iPhone that fails, and only on email.

Handoff Continuity Troubleshooting

I have a problem with my 4s camera which has come up recently. Everytime I take a picture and look it up via the 'Photos' app, it shows as blank. But when I click on edit on the blank picture, it comes up and I am able to save it back on my photo album.

I have a problem with my 4s camera which has come up recently. Everytime I take a picture and look it up via the 'Photos' app, it shows as blank. But when I click on edit on the blank picture, it comes up and I am able to save it back on my photo album as a proper image. Besides, I have also experiences the camera working a bit wiered (slow and often blanks out the moment I am ready to take a photo). Any help on this pls?

Hi Noob Søren
There are a few things that are confusing in your question.
As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
Hope this helps
WN

How to fix a problem with my book pro that has a gray screen with a folder with a question mark on it

does any one know how to fix a problem with my book pro that has a gray screen with a folder with a question mark on it?

Hello Mokhtary123 and welcome to Apple Support Communities,
It will help us diagnose your problem to know the exact model, size, year built, RAM installed and OS you're running.
But basically your system can't find the boot disk. Usually this is a symptom of a dead/dying/corrupted hard drive;
A flashing question mark or globe appears when you start your Mac - Apple Support
OS X Recovery
http://support.apple.com/en-us/HT4718

I have a £50 gift voucher and I tried to buy something with it, but it tells me there was a billing problem with a previous purchase and makes me put in my debit card details. My debit card has no money atm, can't I just pay with my voucher?

I have a £50 gift voucher and I tried to buy something with it, but it tells me there was a billing problem with a previous purchase and makes me put in my debit card details. My debit card has no money atm, can't I just pay with my voucher for the things that have a billing problem? I tried to put my voucher code in again but it won't let me do that.

If the amount of the purchase is close to $21.07, then you need to take into account taxes may be added.
If you go beyond the credit from a gift card the balance will be billed to your credit card account.

Blackberry Z10 has deleted all my emails from all my accounts...also it has deleted emails from server side (OS Rev. 10.1.0.4181)

It's happened a bad thing.
My Z10 (OS 10.1.0.4181) has decided to delete, from all my email account , each emails from july to today!!!! It's unacceptable!!! I have paid 700 Euro for a smartphone that delete my email?! It has deleted also emails from the server!!!
WTF!!!
Who pay for damage that I had?! So Blackberry, wake up! I am so disappointed!
I pretend an answer from blackberry!!! Now!!!!

Hey alexsgv,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
What type of email accounts are added to the BlackBerry Z10? Are they all POP3 and IMAP accounts? Also when a message is removed from the BlackBerry smartphone it will remove it from the mail server, this is by design.
Did you do any software updates recently?
I look forward to your reply.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Problem: [Microsoft][ODBC SQL Server Driver][SQL Server]The Microsoft Distributed Transaction Coordinator (MS DTC) has cancelled the distributed transaction.

Hi Gurus,
I have this problem in my MS SQL Server 2012 that is running in SQL Server 2008 R2 Enterprise 64 bit.. Not sure why... Here is the full details of the error:
Microsoft OLE DB Provider for ODBC Drivers 80040E14
[Microsoft][ODBC SQL Server Driver][SQL Server]The Microsoft Distributed Transaction Coordinator (MS DTC) has cancelled the distributed transaction.
/Libraries/DBA/DBA.asa, line 717
Line 717 is this:
rs.open destTableName,,,,adCmdTable
Full details of the code:
    'Field object used to iterate through each field of the rs
   dim rs, fld
   'call dbInitRS(rs)
   set rs = server.createobject("adodb.recordset")
   'On Error Resume Next
   'Open rs
   set rs.activeConnection = myConnection
   rs.cursorType = adOpenKeyset
   rs.lockType = adLockOptimistic
   'rs.open destTableName
   rs.open destTableName,,,,adCmdTable
   'if err.number <> 0 then
   '   goto HandleError
   'end if
   rs.addNew
Any ideas how to solve this problem?
Thanks

Still does not work. I have allow MSDSTC in my firewall list.
Hi dudskie,
Have you try to use DTCTester or DTCPing to verify MSDTC functionality over the network? Please refer to the following article:
Troubleshooting Problems with MSDTC:
http://msdn.microsoft.com/en-us/library/aa561924.aspx
Use the DTCTester utility to verify transaction support between two computers if SQL Server is installed on one of the computers. The DTCTester utility uses ODBC to verify transaction support against a SQL Server database. For more information about
DTCTester see How to Use DTCTester Tool.
Use DTCPing to verify transaction support between two computers if SQL Server is not installed on either computer. The DTCPing tool must be run on both the client and server computer and is a good alternative to the DTCTester utility when SQL Server
is not installed on either computer. For more information about DTCPing, see
How to troubleshoot MS DTC firewall issues.
If you have any feedback on our support, please click
here.
Hope this helps.
Regards,
Elvis Long
TechNet Community Support

Problem to unbolt my Blackberry continuation has a putting has in the daytime

Similar Messages

Maybe you are looking for