Problem to update BP-Addresses by DTW

Hello everyone
I tried to update our business partner database and was successfull with table OCRD. Unfortunately table CRD1 doesn't accept new data. I found out that column-name in database is Address, but DTW shoes AddressName. I only want to update the names of the companies, therefor my source-file has only 3 columns: linetype, recordkey and Addressname.
Thank you for your help!
Fritz Schwendemann

Hello,
Try to replicate this template :
RecordKey     LineNum     AddressName     AddressType
RecordKey     LineNum     AddressName     AddressType
1                               A A SERVICE     bo_BillTo
1                               A A SERVICE     bo_ShipTo
2                               ABA MOTOR            bo_BillTo
2                                    ABA MOTOR         bo_ShipTo
LineNum is empty since you want to import but not to update.
Rgds,

Similar Messages

  • Problem When Update BP Address Billto and Shipto

    I remove Bill To and Ship To address
    picture link
    http://www.uploadtoday.com/thumb.php?219755&A=437678
    Then I coding DI to create Bill To and Ship To
    with same AddressName But Difference Street,Block ...
    and then i use update method the result is Bill To and Ship To Add Same Data
    not Difference Street,Block ...
    picture link result
    http://www.uploadtoday.com/thumb.php?219903&A=359591
    http://www.uploadtoday.com/thumb.php?219904&A=223347
    Help me pls.
    Thank for advance.
    Edited by: dde sung on Mar 11, 2009 1:17 PM

    Hi dde,
    SAP note 1300954 has some additional information on adding BPAddresses correctly. If after following this note, you are still getting the same results, please post your code so we can test in our systems.
    Regards,
    Niall

  • Probleme bei update von ProductTrees mit DTW

    Hallo zusammen,
    ich habe ein Problem mit dem Updaten von ProductTree via DTW.
    Es sind bereits Verkaufsstücklisten an Artikel angehängt, diese sollen jetzt geändert werden.
    Die Templates sollten Ok sein sein. Hier mal ein Auszug:
    ProductTree:
    Recordkey,Treecode,Quantity,TreeType
    1,00-11-0005003+,1,iSalesTree
    ProductTree_Lines:
    Recordkey,Itemcode,Quantity,ParentItem,PriceList
    1,00-11-0005003,1,00-11-0005003+,1
    1,437000,0.25,00-11-0005003+,1
    Wenn Ich das ganze jetzt per DTW versuche hochzuladen, bleibt der DTW einfach stehen. Selbst nach 30 Min keine Änderung.
    Es ist nur noch möglich DTW abzuschiessen.
    Gibt es irgendwelche Vorraussetzungen um die ProductTrees zu ändern?? (Keine offenen Aufträge etc..)
    Schon mal Danke im Vorraus.

    Guten morgen,
    hast du das Problem nur beim Upload von Wareneinstandspreisen bzw. hast du den Upload schon mal an einer anderen Station probiert.
    Ich selbst habe schlechte Erfahrung mit Komma getrennten Dateien gemacht. Versuch mal Tab oder Semikolon getrennte CSV Dateien. Weiterhin ist es sinnvoll die Templates der DTW zu nehmen und die nicht benötigten Felder leer zu lassen.
    Gruß Steffen

  • Hello, i have problem to update my apps on my ipad

    Hello, i have problem to update my apps on my ipad when i bought it was registered with email of seller which is lost later and ehrn i created my own apple id i cannot update my apps with it because it keeps asking me infos seller email please help me to  update my apps ...regards
    <Email Edited By Host>

    We are fellow users here on these forums, you're not talking to iTunes Support nor Apple - I've asked the hosts to remove your email address from your post (it's not a good idea to post personal info on any public forum).
    What id shows at the bottom of the Featured tab in the App Store app ? You could try tapping on it and then log back in and then see what id shows for the updates.
    But any apps that were downloaded by the previous owner will be tied to their account, and only their account will be able to download updates to those apps - you will need to delete and buy and download them with your own account to be able to download future updates to them.

  • Problem whit Update Operation, Error UPDATE_ROW_CONFLICT with Oracle DB

    Hello friends!, I have a problem whit UPDATE Operation with a Oracle DataBase, but it is rare because it works in "Java Sun Application Server" and not in Tomcat (5.5.12) , displaying the following error:
    "Error :Number of conflicts while synchronizing: 1 SyncResolver.UPDATE_ROW_CONFLICT row 5 values changed in database"
    part of the file log:
    "SEVERE: Error Description
    java.lang.RuntimeException: Number of conflicts while synchronizing: 1 SyncResolver.UPDATE_ROW_CONFLICT row 5 values changed in database
         at com.sun.data.provider.impl.CachedRowSetDataProvider.commitChanges(CachedRowSetDataProvider.java:878)
         at ido02004.EditPerson.saveButton_action(EditPerson.java:519)
    For any change of columns for table in Data Base.
    The code used in the page (EditPerson.jsp) is:
    public void init() {
    Object pid = getSessionBean1().getCurrentPersonId();
    RowKey personRowKey = ido_personsDataProvider.findFirst("PERSON_ID", pid);
    ido_personsDataProvider.setCursorRow(personRowKey);
    public String saveButton_action() {
    try {
    ido_personsDataProvider.setValue("USER_ID", userDD.getSelected());
    ido_personsDataProvider.setValue("STATUS", statusDD.getSelected());
    ido_personsDataProvider.setValue("NAME", name.getValue());
    ido_personsDataProvider.setValue("FUNCTION", function.getValue());
    ido_personsDataProvider.setValue("ADDRESS", address.getValue());
    ido_personsDataProvider.setValue("EMAIL", email.getValue());
    ido_personsDataProvider.setValue("PHONE", phone.getValue());
    ido_personsDataProvider.setValue("VALUATION", valuation.getValue());
    ido_personsDataProvider.commitChanges();
    catch (Exception ex) {
    log("Error Description", ex);
    error("Error :"+ex.getMessage());
    return null;
    Please, Some idea of why gives the error? Help!
    Thanks in advance!
    Ren�
    P.D. Excuse my English.

    Hi All!
    New Info:
    System.out.println(" date created : "+ido_personsDataProvider.getValue("DATE_CREATED"));
    System.out.println(ido_personsDataProvider.getCachedRowSet().getMetaData().getColumnClassName(13));When these lines are printed in Java Sun Application Server for JSC show this:
    [#|2006-05-05T17:12:50.264-0500|INFO|sun-appserver-pe8.1_02|javax.enterprise.system.stream.out|_ThreadID=15;|
    date created : 2006-04-24 00:00:00.0|#]
    [#|2006-05-05T17:12:50.264-0500|INFO|sun-appserver-pe8.1_02|javax.enterprise.system.stream.out|_ThreadID=15;|
    java.sql.Timestamp|#]
    When these lines are printed in Tomcat show this:
    date created : 2006-04-24
    java.sql.Timestamp
    Why? the values of this date is different in one or another server. Problem of driver JDBC? I use driver: to ojdbc14.jar, in Tomcat for the connection to the BD Oracle. Maybe this originates error UPDATE_ROW_CONFLICT...
    Please, any idea?
    Thanks!

  • Update equipment address

    I'm an ABAP developer and I'm trying to update equipment address (especially coordinates) in an ABAP program. I tried to debug CRM Web UI application and implement the same code in my program but it doesn't work.
    Basically I'm using function modules COM_IOBJ_LOCAT_ADDR_STORE, ADDR_SINGLE_SAVE and COM_COM_LOCAT_ADDR_SAVE_DB. Obviously I have something missing but I wasn't able to determine what's it.
    [Screenshot of WEB UI where I try to update (Accounts & Products > Equipments > Address)|http://i54.tinypic.com/2ev6kk5.jpg]

    Hi Ravi,
    If you are able to do it with GenIL/BOL..that would be the best. However, we prefer to use BOL only from WebUI. So, I hope you are using this only in WebUI Components, and not from any BAdI's or Proxy's.
    And the FM's/Classes should definitely work, from my experience.
    Did you try tracing all the FM's/Classes and the sequence being called...by doing your exercise manually?
    If not, you can try that...even your problem is solved, it would help you in future.
    Thanks,
    Sandeep

  • I fixed my iSync Problem it now syncs Address book and iCal on 10.4.9

    Ever since updating to the latest version of OS X 10.4.9 iSync didn't work anymore with my Sony Z520i.
    Neither Address Book or iCal wouldn't sync at all and I tried everything even a fresh erase and Install.
    Someone here on this forum told me to delete the folder SyncServices found in ~/library/Aplicatrion Support/SyncServices. I did that but it still didn't work so I replaced the same folder from the trash. I then launched iSync again, it did sync my address book only. I couldn't select the option for iCal in iSync anymore until I resynced my iCal in my Mac prefrences, after that I could select it in iSync but it would still fail.
    So I deleted two files that belong to iCal located in ~/library/Aplication Support/iCal the two files are sync.plist and syncState.plist
    When I tried it it worked perfectly iSync synced both address book and iCal and I have been testing it without any problems updating my address book and iCal for the last few days.
    It's 100% fixed :)
    17" Powerbook G4 Airport Express   Mac OS X (10.4.9)   1.67 GHz, 93.04 GB, 1GB RAM, 128 MB ATI 9700

    You only get the one hour difference if the Time Zone or Daylight saving setting is set incorrectly on your phone, or if you are viewing events before the last time the clocks changed (March), or after the next time the clocks change (October).

  • Update oBP.Addresses

    Hi all,
    I have the following which updates the addresses in Business Partners.
                If strAddress_type = "Billing address" Then
                    oBP.CardCode = strUser_Id
                    oBP.CardName = strFull_name
                    oBP.UserFields.Fields.Item("U_username").Value = strUserName
                    oBP.EmailAddress = strUser_Email
                    oBP.FederalTaxID = strExtra_field_1 'VAT Nr or Tax ID
                    oBP.Addresses.AddressName = strAddress_1
                    oBP.Addresses.Street = strAddress_2
                    oBP.Addresses.City = strCity
                    oBP.Addresses.ZipCode = strZip
                    oBP.Addresses.AddressType = BoAddressType.bo_BillTo
                Else 'If it is Shipping Address
                    oBP.CardCode = strUser_Id
                    oBP.Addresses.AddressName = strAddress_1
                    oBP.Addresses.Street = strAddress_2
                    oBP.Addresses.City = strCity
                    oBP.Addresses.ZipCode = strZip
                    oBP.Addresses.AddressType = BoAddressType.bo_ShipTo
                End If
                rs2.DoQuery("SELECT COUNT(CARDCODE) FROM OCRD WHERE CARDCODE = '" & strUser_Id & "'") 'is an old customer?
                Dim z As Integer = rs2.Fields.Item(0).Value 'is an old customer?
                If z = 0 Then
                    'Create Business Partner
                    lretcode = oBP.Add
                Else
                    'Update Business Partner
                    lretcode = oBP.Update
                End If
    The problem is that when BP is updated with a new Shipping Address the Billing Address is deleted!!
    Any Idea?
    Thanks in advance
    Vangelis
    Edited by: Vangelis Kanellopoulos on Aug 12, 2010 7:14 AM

    Hello
    You should use SetCurrentline to position the address which would like to update...
    You can use the address name to find the address is exists or Not.
    Example from help with SetCurrentLine()
    bp.CardName = "C009"
    bp.CardCode = "C009"
    bp.CardType = SAPbobsCOM.BoCardTypes.cCustomer
    bp.Addresses.SetCurrentLine(0)
    bp.Addresses.AddressName = "Address1"
    bp.Addresses.Block = "1"
    bp.Addresses.Street = "street 1"
    bp.Addresses.City = "City 1"
    bp.Addresses.Country = "DE"
    bp.Addresses.AddressType = SAPbobsCOM.BoAddressType.bo_BillTo
    bp.Addresses.Add
    bp.Addresses.SetCurrentLine(1)
    bp.Addresses.AddressName = "Address2"
    bp.Addresses.Block = "2"
    bp.Addresses.Street = "street 2"
    bp.Addresses.City = "City 2"
    bp.Addresses.Country = "DE"
    bp.Addresses.AddressType = SAPbobsCOM.BoAddressType.bo_BillTo
    bp.Addresses.Add
    bp.Addresses.SetCurrentLine(2)
    bp.Addresses.AddressName = "Address3"
    bp.Addresses.Block = "3"
    bp.Addresses.Street = "street 3"
    bp.Addresses.City = "City 3"
    bp.Addresses.Country = "DE"
    bp.Addresses.AddressType = SAPbobsCOM.BoAddressType.bo_BillTo
    bp.Addresses.Add
    Regards
    János

  • Correct the 2 problems before updating this airport wireless device

    Hi, guys.
    I want to access my Time Capsule from the internet.
    But i already have a router establishing my internet connnection, so i've set it to connect using Ethernet and wireless mode is off.
    This setting doesn't show the "share disc over WAN" and i need that. (As far as i can tell). Therefor i have to switch the connection mode from Off (Bridge Mode) to share a public IP - this enables the "share disc over WAN" option.
    But TC returns this message to me when updating the device. "Correct the 2 problems before updating this airport wireless device".
    I'm confused? Cuz i thought they should mirror my Routers local IP's?
    What do i do? Please help, any advice is much appreciated. 

    The Asus model that you mentioned is definitely a router, so it is handling DHCP services for your network.
    If you have the Time Capsule set up in Bridge Mode, I cannot understand why you are getting a message about DHCP address conflicts....since DHCP is turned off when the Time Capsule in Bridge Mode.
    Unless....you have tried to change some settings around manually.
    It would probably be best to start over and perform a factory default reset on the Time Capsule, then configure it again. The last setting to check before you click Update would be to make sure that the setting for Connection Sharing is set to "Off (Bridge Mode)".
    As far as connecting from the Internet....that's another question since everything that I've seen assumes that the Time Capsule is configured as the main router on the network. I cannot recall seeing a setup when the Time Capsule was not the main router on the network, but will check around.

  • Light Flow / Accessibility Problems After Update ..

    OK Light Flow problem after update.... the problem is my Talk Back in Accessibility keeps turning on after i restart my phone i know it should not do that it only dose it when i have Light Flow - LED & Notification installed and Tturned on in Accessibility   ..... i use Light Flow - LED & Notification to control my LED Notification becuse i hate the built in feature that came with the phone the default management keep the LED to dim hard to see  ........ i have used the app ever scene i got the phone and never had a problem tell this crappy update JZO54K.I535VRBLMD3 / I535VRBLMD3 came out  i also believe the update JZO54K.I535VRBLMD3 / I535VRBLMD3 that was pushed out made the Accessibility option bad / and everything else
    The phone is new
    i have hard factory reset it / battery pulled
    it did it with old phone but did not do it before that update was pushed
    i also got a (NEW) NOT REFURBED phone trying to solve the poor 4G LTE signal /battery life
    and over all phone performance with no luck  that update was a bad one and needs to be addressed
    PLEASE FIX THE PROBLEM >>>>> VERIZON SAMSUNG GOOGLE ( PLEASE )

    yep, I had that same problem too, but found a work around.  First I tried disabling the accessibility options (but that was no good, I like the light flow notifications).  I read from the app (see bottom of opening screen):
    I found the work around to be just getting a folder app from the play store - the only talking it was doing was "opening folder" "closing folder" (annoying as he!!)
    See the second screen for what that says as far as options.  My opinion - just get the folder app, it's easier.

  • Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated by itself and now outlook and address book have each over 340,000. What should I do?

    Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated entries and have now 340,000. I reinstalled microsoft office and, thus, outlook, and reinstalled mac OS X system and applications. While I managed to delete outlook contacts so that I can re-sync with my blackberry, the contacts at Mac Address Book were not deleted and still have over 340,000 entries. I do not mind deleting all contacts since I have back up, but I have not been able to delete them. Also, when I go at Address Book and try to delete or merge duplicated entries, the system takes forever and never ends because of such large amount of entries. Worse, when I do so I run out of RAM memory.
    My Macbook pro is just 2 months old.
    What should I do? Is there a way to delete my Mac Address Book without having the problem above?
    Many thanks
    Regis

    zlatan24 wrote:
    For solving out troubles connected with corrupted or lost address book you may use address book recovery. It owns various features such as restoring wab files, it working under any Windows OS. The utility has modern and easy to use interface due to almost every experienced users.
    If it is a windows problem it's not going to run on the OP's MacBook Pro

  • CS4 Master Collection - Problem Applying Updates

    Hi
    I'm running the CS4 Master Collection on Windows Vista Ultimate 32-bit, SP2.
    Normally I have no problem applying updates to the various Adobe components when they become available, however for a while now I've been unable to instal an update that's reported as being available for Adobe Media Encoder 4.1.0.
    If I run the "check for updates" manually I can download the update (reported as being 63.7MB) and when I attempt to instal it the installation process appears to run. It finishes after a while and the Adobe Updater reports "The Udating Process is Finished" in a single dialog box with a single button entitled "Quit" - which seems odd as "Quit" implies "finish earlier than planned", I'd have expected something more in line with "All done", something like "OK".
    Anyway, when I run the check for updates again I'm told about the same update implying that it wasn't applied successfully.
    I get this behaviour whether I run the update as an Administrator or not (all other updates for other products are applied without problem). I also get it regardless of whether or not I reboot the machine after trying to apply the update.
    Does anyone have any suggestions on what could be causing the problem ? I couldn't find anything obvious or obviously relevant in any of the Windows event logs on the PC.
    Thanks for any ideas
    Steve

    I am having the same problem. I found a forum that suggested this. Apparently it worked for some people, but not for me. Let me know if it does:
    1. Start -> All Programs -> Accessories
    2. Right-click on Command Prompt and select "Run as..."
    3. Run as Administrator (even if you are logged in as Admin. You need to run in the Black Command Prompt, not the White one)
    4. Run: regsvr32 JScript.DLL
    5. Then run: regsvr32 vbscript.DLL
    (dont forget the spaces, or it won't work)
    6. Then try running the set up again
    As i said, it worked for some on the forum, but not others (like me). Try it and see if works for you

  • Cisco ASA 5505 - problem with negotiating IP address from PPPoE

    Hi all,
    I have problem with negotiating IP address from PPPoE. There is following design: ISP providing vDSL ending on VDSL modem in bridge mode. Behind brigde modem is ASA 5505 terminting PPPoE on OUTSIDE. Everything works fine except  negotiating IP address from PPPoE server.
    I have configured ASA 5505 with (ASA Version 9.2(2)4) for PPPoE like this [1.]. But If i try to "show" IP address on OUTSIDE interface a get this [2.], ok strange but let's continue. If list "show vpdn pppinterface id 1"  i get this [3.]. Seems that I got public IP addres what was right, but this IP address was not associated with interface OUTSIDE?
    Well, if I set IP address manually like this [4.] and also set a default route everything works fine but what will happen when ISP change reservation for my IP address or default gateway. 
    I have tried different version of ASA OS like 8.4, 9.1 but without luck. 
    Can anybody help me. Thanks a lot.
    Regards
    Karel
    [1.]
    interface Vlan100
    description >>VLAN pro pripojeni do internetu<<
    nameif OUTSIDE
    security-level 0
    pppoe client vpdn group O2
    ip address pppoe setroute
    vpdn group O2 request dialout pppoe
    vpdn group O2 localname O2
    vpdn group O2 ppp authentication chap
    vpdn username O2 password *****
    interface Ethernet0/0
    description >>uplink O2 vDSL<<
    switchport access vlan 100
    [2.]
    ciscoasa(config-if)# show ip address vlan 100 pppoe
    ciscoasa(config-if)#  0.0.0.0 255.255.255.255 on Interface: OUTSIDE
    ciscoasa(config-if)# show interface vlan 100 detail
    Interface Vlan2 "OUTSIDE", is up, line protocol is up
     Hardware is EtherSVI, BW 100 Mbps, DLY 100 usec
            Description: >>VLAN pro pripojeni do internetu<<
            MAC address f44e.05d0.6c17, MTU 1492
            IP address unassigned
      Traffic Statistics for "OUTSIDE":
            28 packets input, 1307 bytes
            31 packets output, 721 bytes
            0 packets dropped
          1 minute input rate 0 pkts/sec,  3 bytes/sec
          1 minute output rate 0 pkts/sec,  1 bytes/sec
          1 minute drop rate, 0 pkts/sec
          5 minute input rate 0 pkts/sec,  0 bytes/sec
          5 minute output rate 0 pkts/sec,  0 bytes/sec
          5 minute drop rate, 0 pkts/sec
      Control Point Interface States:
            Interface number is 15
            Interface config status is active
            Interface state is active
    [3.]
    ciscoasa(config-if)# show vpdn pppinterface id 1
    PPP virtual interface id = 1
    PPP authentication protocol is CHAP
    Server ip address is 88.103.200.41
    Our ip address is 85.71.188.158
    Transmitted Pkts: 20, Received Pkts: 16, Error Pkts: 0
    MPPE key strength is None
      MPPE_Encrypt_Pkts: 0,  MPPE_Encrypt_Bytes: 0
      MPPE_Decrypt_Pkts: 0,  MPPE_Decrypt_Bytes: 0
      Rcvd_Out_Of_Seq_MPPE_Pkts: 0
    ciscoasa(config-if)# show vpdn session state
    %No active L2TP tunnels
    %No active PPTP tunnels
    PPPoE Session Information (Total tunnels=1 sessions=1)
    SessID TunID Intf     State       Last Chg
    22298      2 OUTSIDE  SESSION_UP  561 secs
    [4.]
    interface Vlan100
     description >>VLAN pro pripojeni do internetu<<
     nameif OUTSIDE
     security-level 0
     pppoe client vpdn group O2
     ip address 85.71.188.158 255.255.255.255 pppoe setroute
     route OUTSIDE 0.0.0.0 0.0.0.0 88.103.200.41 1

    You're right that the ACL should not affect otherwise allowed communications to the interface address.
    Try disabling the ip audit feature on your outside interface.
    no ip audit interface OUTSIDE AP_OUTSIDE_INFO
    no ip audit interface OUTSIDE AP_OUTSIDE_ATTACK

  • Problem with updating the PC Updater software

    Good evening (from Germany). I have a problem with updating my Nokia Software Updater. I can download the setup and I can execute this. But when the installation starts (0%) a error message appears. It's a problem with Windows Installer but I don't know how to solve the problem. Here is a picture with the exactly error message:
    http://img-up.net/?up=Nokia_probES8HJXXg.jpg
    I hope somebody knows the anser with this software...
    Greetings
    OS: Windows XP SP2
    Phone: Nokia 3110 classic Firmware: V 5.50
    Message Edited by dernamenlose on 24-Apr-2008 08:56 PM

    Good morning (from Denmark).
    I hve the same problem.
    OS: WinXP SP2
    Phone: N73.
    Greetings.

  • How do I update multiple addresses at once?

    I have a about 2 dozen entries in my address book for a particular company. Is there a way to update the address for all of the employees of that company at one time? It is very time consuming to go to each entry and type the address over and over again. The same would go for the fax number

    If you are not familiar with Applescript the simplest is probably to select them all (eg by putting the company name in the search box and selecting all found) export the selection as a vCard then delete the selection. Open the vCard in a text editor, do a global find/replace on the affected data, then import the vCard again.
    AK

Maybe you are looking for