Problem while saving

I'll explain the problem in a short way, here what I see while I'm working on project:
http://img145.imageshack.us/img145/4333/clipboard02et6.png
And he is a resoult after I save it as png or jpg:
http://img145.imageshack.us/img145/8800/clipboard01tg9.png
Does anyone have any idea what can couse that difference and can I solve the problem?
I would be so thankful for a fast answer and help
Best regards

At this point the images are much closer - I'd say the brightness is about
the same, but with a more cyan cast to the Irfanview images. I would
probably be satisfied at this point, as long as the customer is happy.
The two images will match more closely if you do one of the following,
listed in the order of preference:
1) Adjust your monitor manually so that web images look correct (examples
at http://www.normankoren.com/makingfineprints1A.html). After you have done
this, use Start>Settings>Control Panel>Display>Advanced>Color to set your
system display profile to sRGB.
2) Calibrate your monitor with a device such as the Spyder Pro or i1
Display 2. Do all your work in sRGB, and ignore the way the images look in
Irfanview.
3) Calibrate your monitor to match the sRGB standard.
4) Turn off color management in Photoshop's Color Settings (ctrl-shift-K).
This is the simplest solution, but the problem is that the image on other
people's monitors will not particularly match what you see.

Similar Messages

Problem while saving date field in custom table

Hi,
Iam facing the following problem while saving a date field in custome table
i have a date field zdate in which the value is 02082010.
now when i try to insert this value in the custom table it is getting updated as 20/10/0208 , but it should be 08/02/2010
How can i correct it..
Regards
Kumar

just before saving u might have to use a string reverse FM and then save it..
CALL FUNCTION 'STRING_REVERSE'
EXPORTING
    STRING          = p_string
    LANG            = sy-langu
IMPORTING
   RSTRING          = r_string
EXCEPTIONS
   TOO_SMALL        = 1
   OTHERS           = 2

Problem while saving an object under a dev class

hi all,
Here is a problem while saving an object under a development class.... I created a Z program (ZSORDER) through SE38 and while i was saving that Z program under a development class called SALES it shows an error message like <b>" customer object program ZSORDER can't be assigned to the package SALES"</b>..... can any one can explain what is the problem....

hi,
you should have created your package starting with the letters "Y" or "Z".
you have created it with the letter "s". SALES.
's' is reserved to be used by SAP.
so create the package with the letters 'y' or 'z' like 'ysales' and you wont be getting that problem.
try it.
warm regards,
Hari Kiran

Problem While saving the Invoice

Dear Experts,
                  I am facing the Problem while Saving the Invoice, In invoice, We assigne the Output as RD00 and Medium as 6 (EDI).
When we are saving the Invoice, it getting as ' Updated Terminated'. When i found where the Error is coming in SM13, it showing in as Function Module "RV_MESSAGE_UPDATE' & Error Details is 'EAN11 not found for Material'.
                 But in Invoice whatever we enter the Material number, we maintain the EAN11 code. This EAN11 code is seen in MARM & VBRP Table. Unable to find the what the exact error is.
               please help me to sort this issue, Its business complicated.
Thanks in Advance,
Srini

Hi Asik,
          Thanks for your valuable Message.... I run as you suggested, but the dispatch time i kept as 1 or 2. because the program RSNAST00 is picking the values only for 1 or 2. so i run manually,, as of now the issue is, in the invoice number, for one material number, the Billed quantity is zero, so the UOM is getting as initial. From those vaues we are picking the EAN11 from maram table.
So, i modify that and run the EDI manually. As of now its working...
          Thanks for your reply,,,
Regards,
Srini

Problem while saveing in Table Control.

Hi
I am geting error while saving data in table control.
This table contol is pop up window at end of screen .
user enter qty & uom in TC..
Error i am getting is...
Field symbol has not been assigned.
Error analysis
The system tried to access an anasigned field symbol (data segment
number 32772).
The field symbol is no longer assigned, because a Unicode program
previously tried to set the field symbol using an ASSIGN statement with
an offset/length declaration. The memory addressed in this offset/length
declaration, however, no longer lay within the valid range.
Information on where terminated
The termination occurred in the ABAP program "SAPLOMCV" in
"CONVERSION_EXIT_MATN1_INPUT".
i Have coded like this..
MODULE USER_COMMAND_0112 INPUT.
CASE OKCODE.
    WHEN 'BACK' or 'CANCEL'.
      SET SCREEN 0.
This iti is contain data which diplay in TC
     when 'DISPLAY'.
          LOOP AT ITI.
          read table iti with key ingr_code = iti-ingr_code
                                  ingr_desc = iti-ingr_desc.
          wka1-ingr_code = iti-ingr_code.
          wka1-ingr_desc = iti-ingr_desc.
          wka1-conc = iti-conc.
          wka1-quantity = iti-quantity.
          wka1-uom = iti-uom.
        append wka1 to itf.
        ENDLOOP.
     WHEN 'SAV'.
      loop at itf where check = 'x' .
              update zacg_ns
                set ingr_code = itf-ingr_code
                col_name = itf-ingr_desc
                conc = itf-conc
                quantity = itf-quantity
                  UOM = itf-UOM
                  ru = itf-ru
                  where ingr_code = itf-ingr_code
                  and col_name = itf-ingr_desc.
    zacg_ns-ingr_code = itf-ingr_code.
   zacg_ns-col_name = itf-ingr_desc.
   zacg_ns-conc = itf-conc.
zacg_ns-quantity = itf-quantity.
zacg_ns-UOM = itf-UOM.
update zacg_ns.
                 endloop.
                 leave program.
              ENDCASE.
          ENDMODULE.                 " USER_COMMAND_0112 INPUT
MODULE read_table_control INPUT
MODULE read_table_control INPUT.
MODIFY itf INDEX tc-current_line.
ENDMODULE.                    "read_table_control INPUT
*& Include           ZACG_NS_2                                        *
*&      Module STATUS_0111 OUTPUT
      text
MODULE STATUS_0111 OUTPUT.
SET PF-STATUS 'ZNEWSHADE'.
SET TITLEBAR 'ZNS'.
ENDMODULE.                 " STATUS_0111 OUTPUT
*&      Module STATUS_0112 OUTPUT
      text
MODULE STATUS_0112 OUTPUT.
SET PF-STATUS 'ZTC'.
SET TITLEBAR 'xxx'.
DESCRIBE TABLE itf LINES lines.
tc-lines = lines.
ENDMODULE.                 " STATUS_0112 OUTPUt
                                                                                PROCESS BEFORE OUTPUT.
MODULE STATUS_0112.
LOOP at itf WITH CONTROL TC CURSOR tc-current_line.
    MODULE TC_PBO .
ENDLOOP.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
LOOP at itf .
    module read_table_control.
ENDLOOP.
MODULE USER_COMMAND_0112.
Can any one help me..

Hi,
Did you enter that filed later after creating the table control?
You check in the element list whether for that element u have an entry or not..
Regards,
Nishant

Problem while saving files

Hello everyone,
I have problem while wanting to save my projects. Nothing appears when I click on "Save" or "Save as". Ctrl+S doesn't work either. The only option that remains to me is closing my project, then it asks me if I want to save or not, then I save. But once it closed without asking me, I lost my work It's kind of annoying.
I'm using Photoshop CS5
Could anyone help me?
Thanks.

You likely don't have a display with a minimum of 768 pixels vertically.
Hard to believe, but Photoshop's Save dialog will fail if you don't have a display that large.
-Noel

Unwanted File Download box in JSF - Problem while Saving State.

Hi,
I am having a situation wherin there are multiple command links dynamically generated in a dataTable.When I click on any one of the links a file download dialogue pops up to save/open a pdf doc.Irrespective of any operations on the download dialogue, if I click on anyother link (i.e this is the 2nd click on tat page)
then the file download doesnt pop up and instead the page is refreshed.
On the 3rd click , the file download again pops up.
The code in the action method of the command link goes like this
public void showPDF() {
byte[] pdf = // gets the data from another place.
FacesContext faces = FacesContext.getCurrentInstance();
          HttpServletResponse response = (HttpServletResponse) faces.getExternalContext().getResponse();
          response.setContentType("application/pdf");
          response.setContentLength(pdf.length);
          response.setHeader("Content-disposition", "attachment");
          response.setHeader("Cache-Control", "cache, must-revalidate");
          response.setHeader("Pragma", "public");
          try {
               ServletOutputStream output = response.getOutputStream();
               output.write(pdf);
          } catch (IOException e) {
                    log.debug("IOException in viewPdf: " + e.toString());
     faces.responseComplete();
}To fix the above problem ...I have included the following 2 lines of code just before invoking the responseComplete() method :
StateManager stateManager = (StateManager)
                                                                faces.getApplication().getStateManager();
     stateManager.saveSerializedView(faces);This solves the above problem but causes another problem for which I need help :
There is a value change listener in my jsp.When I change the value in a drop down list in the same page, the file download dialogue is poping up. which shuld only pop up when am clicking any one of the command links.
I debugged thru the code and found out that after the value change listener action method is finished executing it jumps and executes the above showPDF() method.
Seems its something to do with saving of the client state.
It will be of great help anyone can advise on this.
Thanks
Archan

Hi,
I am having a situation wherin there are multiple command links dynamically generated in a dataTable.When I click on any one of the links a file download dialogue pops up to save/open a pdf doc.Irrespective of any operations on the download dialogue, if I click on anyother link (i.e this is the 2nd click on tat page)
then the file download doesnt pop up and instead the page is refreshed.
On the 3rd click , the file download again pops up.
The code in the action method of the command link goes like this
public void showPDF() {
byte[] pdf = // gets the data from another place.
FacesContext faces = FacesContext.getCurrentInstance();
          HttpServletResponse response = (HttpServletResponse) faces.getExternalContext().getResponse();
          response.setContentType("application/pdf");
          response.setContentLength(pdf.length);
          response.setHeader("Content-disposition", "attachment");
          response.setHeader("Cache-Control", "cache, must-revalidate");
          response.setHeader("Pragma", "public");
          try {
               ServletOutputStream output = response.getOutputStream();
               output.write(pdf);
          } catch (IOException e) {
                    log.debug("IOException in viewPdf: " + e.toString());
     faces.responseComplete();
}To fix the above problem ...I have included the following 2 lines of code just before invoking the responseComplete() method :
StateManager stateManager = (StateManager)
                                                                faces.getApplication().getStateManager();
     stateManager.saveSerializedView(faces);This solves the above problem but causes another problem for which I need help :
There is a value change listener in my jsp.When I change the value in a drop down list in the same page, the file download dialogue is poping up. which shuld only pop up when am clicking any one of the command links.
I debugged thru the code and found out that after the value change listener action method is finished executing it jumps and executes the above showPDF() method.
Seems its something to do with saving of the client state.
It will be of great help anyone can advise on this.
Thanks
Archan

Problem While Saving the editable ALV GRID

Dear Experts,
I have a scenario in which i am display the ALV(using class) with some data in the custom container of module pool screen in the non-editable mode.Also i have save and edit buttons.If i click the edit button i have written the code to edit the some columns in the ALV grid, it is working fine.After editing it,when i click the save button then ALV has to refreshed with edited data and then it should go to non editable mode but it is not working.I have written the code for changing the editable ALv to non editable mode as follows :
call method c_alvgd->set_ready_for_input
    exporting
      i_ready_for_input = 0.
*****Row and column of the alv are refreshed after changing values
stable-row = 'X'.
stable-col = 'X'.
*REfreshed ALV display with the changed values
*This ALV is non editable and contains new values
call method c_alvgd->refresh_table_display
    exporting
      is_stable = stable
    exceptions
      finished = 1
      others    = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Could you Suggest me solution for this issue ?
Thanks & Regards,
R.Dhineshraj.

Dhinesh,
I suppose that you are able to get your changes values on screen but not able to get your field in DISPLAY mode from editable mode, let me know if this is not your problem.
When you press SAVE, after the PAI, again PBO will run and hence the editable code for that field will overwrite which will keep it editable.
So, do something like this.
data: gv_edit value 'X'..... "global variable in TOP include
PBO....
loop at ...
if gv_edit = 'X'.
CALL METHOD lo_alv->set_ready_for_input
EXPORTING
    i_ready_for_input = 1.
else.
CALL METHOD lo_alv->set_ready_for_input
EXPORTING
    i_ready_for_input = 0.
endif.
endloop.
PAI.
when 'SAVE'.
gv_edit = space.
When 'EDIT'.
gv_edit = 'X'.
Regards,
Diwakar

Problem while saving the BEx qeueries

Hi,
I am facing a strange problem.
I am trying to copy the old query to a new query. Now when i just change/try to copy by using save as function in query designer the following problem occurs
1. An unexpected object variable or with block variable not setu2019 error occurred in wdrblog error(s) are logged.
I am using BEx 3.5 patch 11.
Note: I checked the relevant error message in Service marketplace but they are asking us to go thorugh the OSS note 571831,575434. But in these mentioned notes the patch level & Version are lower than what we have.
Waht might the problem. any clues would be great & appreciated
Thanks

Hello Venkatesh,
I didn't come across this type of problem before, just try to copy the query by using t-code 'RSZC'. Check the query whether everything is correct.
Let me know if you need more information to copy the query.
Thanks,
Umashankar

Problem while saving a new BP

Dear CRM gurus.
When creating business partner in former GUI (ABAP) we have to save the customer before we can assign marketing atributes. The system issues error message "Business partner with GUID *** does not exist". And we loose all data and we have to start again. Is there any note which would correct this. I have bee trying to find any but no success.
Thank you very much for any help.
Best regards,
Petr

Hi Petr Syka,
Sorry about late response.
Implement Note 1471993 - error when saving bp with marketing attributes in SAP-GUID
Best regards,
Caíque Escaler

Problem while saving the query

I have created transport request from solman, and when I try to save the query under the the request it is asking whether to create a new task under a different specific user, if I cancel it the query is not getting saved, please help me.
thanks

Hey Sudeer,
This happens becoz the Query that u are changing is already locked by another transport request which is owned by diffrent user..
Ask the relevant user to release the corresponding request, so that u dont get the prompt again....
To avoid it, just create a new Query( totally new query ) and then assign your transport request to it..
Reward points for usefull answer...
Regards,
Anand Rangarajan

Problem while saving list output as local file.

Hi Gurus!
i want to save the list output of classical report into excel but complete data is not coming into excel file.
[SYSTEM - > LIST ->SAVE -> LOCAL ->SPREADSHEET ]
when same output is transfer to unconverted file [notepad ] then completed data is coming.
please help me ,
points sure!
Rahul
Message was edited by:
rahul deshmukh

Yes Rahul, I know that and you have to do the formating. This is how you can do.
Open the unconverted file in Excel format.
Select the first column and then goto Data - Text to Columns , a pop up will come.
Select Delimited, then press next.
Then selct the delimeter that is used in the unconverted file to seperate two columns. Say for example if ' | ' is used then in others write ' | ' and press next.
IN the data preview section select all the columns and then select text radio button on top and press finish finally.
Now u will get the proper format of the file. Delete all the empty rows and columns that u don't want.
Reward if you find it useful.
Regards.
Akhil.

Problems while saving the tax values in a Draft Document to AP Invoice

Hi All
I have an interface .net where I use a DIAPI to enter values in B1 2007 B (8.60.039) PL 15.
I have the following cases:
First case
- I create a document type oPurchaseInvoices, where I set the tax values for IRPF, INSS, ISSQN (Brazil).
When i execute the code that inserts this A/P Invoice in SAP, it works perfectly, including by setting the values of the taxes correctly.
Second case
- I create a document type oDrafts, and say that this draft is the type oPurchaseInvoices.
After that I follow the same steps to launch a note entry, laying the tax values(IRPF, INSS, ISSQN) and everything else.
When i execute the code that inserts this values in the draft, the tax values are not entered and that everything else works perfectly.
You can tell me whether the taxes really are not inserted when I issue a draft or I'm leaving to score some parameter.
I am in the look of your response
Regards
Luis Felipe

Hi Gordon.
You can see below the part of the code to add the Draft Document.
oAPInvoice = oCompany.SapCommand.GetBusinessObject(BoObjectTypes.oDrafts)
oAPInvoice.DocObjectCode = BoObjectTypes.oPurchaseInvoices
With oAPInvoice
    .Lines.TaxLiable = BoYesNoEnum.tYES
    .Lines.ItemCode = Itemcode
    .Lines.Quantity = Quantity
    .Lines.UnitPrice = Unitprice
    .Lines.TaxCode = Taxcode
    .Lines.WTLiable = BoYesNoEnum.tNO
    .Lines.Usage = "Consumo"
    If oDTO.IRRF > 0 Or oDTO.INSS > 0 Or oDTO.ISSQN > 0 Then
        If oDTO.WtLiable = "Y" Then .Lines.WTLiable = BoYesNoEnum.tYES
        Add tax values
        For i As Int16 = 1 To 3
            vlrImposto = 0
            addTax = False
            If IRRF > 0 And Not addIR Then
                codImposto = CodeIRRF   (tax code)
                vlrImposto = IRRF             (tax value)
                addIR = True
                addTax = True
            ElseIf INSS > 0 And Not addINSS Then
                codImposto = "F501" (tax code)
                vlrImposto = INSS       (tax value)
                addINSS = True
                addTax = True
            ElseIf ISSQN > 0 And Not addISSQN Then
                codImposto = CodeISSQN (tax code)
                vlrImposto = ISSQN            (tax value)
                addISSQN = True
                addTax = True
            End If
            If addTax Then
                (If include more one tax then add line)
                If i > 1 And vlrImposto > 0 Then .Lines.WithholdingTaxLines.Add()
                .Lines.WithholdingTaxLines.WTCode = codImposto                     (tax code)
                .Lines.WithholdingTaxLines.TaxableAmount = Unitprice              (base value calculation)
                .Lines.WithholdingTaxLines.WTAmount = vlrImposto                   (tax value)
            End If
        Next
    End If
    .CardCode = Cardcode
    .CardName = Cardname
    .HandWritten = BoYesNoEnum.tNO
    .DocDueDate = DueDate
    .DocDate = DocDate
    .TaxDate = TaxDate
    .SequenceCode = -2      '-1=Manual -2=External
    .SeriesString = "RCB"
    .SequenceModel = 37
    lRetCode = .Add()
End With
Regards
Luis Felipe

Error found while saving. System.Data.OleDb.OleDbException (0x80040E10): No value given for one or more required parameters.

Hello Friends
I am facing problem while saving the data into the ms access 2007.
Below picture shows my database and table
Below picture shows my error log.
Here is my GettingCategoryId() method code.
private OleDbCommand GettingCategoryId()
OleDbCommand cmd2 = new OleDbCommand("select * from tbl_category where category_name='" + combobox_category_name.Text + "' ", GlobalVarClass.globalCon);
OleDbDataReader dr = cmd.ExecuteReader();
while (dr.Read())
textBox1.Text = Convert.ToString(dr.GetInt32(0));
return cmd2;
Here is my conv_photo() method code.
void conv_photo()
//converting photo to binary data
if (pictureBox1.Image != null)
ms = new MemoryStream();
pictureBox1.Image.Save(ms, ImageFormat.Jpeg);
byte[] photo_aray = new byte[ms.Length];
ms.Position = 0;
ms.Read(photo_aray, 0, photo_aray.Length);
cmd.Parameters.AddWithValue("@item_image", photo_aray);
Here is my connection string.
public static string gloabal_connection_string = "Provider=Microsoft.ACE.OLEDB.12.0;Data Source= " + Application.StartupPath + "\\pos_fircos.accdb";
public static OleDbConnection globalCon = new OleDbConnection(gloabal_connection_string);
This is my saving code.
OleDbCommand cmd = GettingCategoryId();
cmd = new OleDbCommand("INSERT INTO tbl_items(category_id,item_no,item_model,item_description,item_sale_price,item_image)Values('" + Convert.ToInt32(textBox1.Text) + "','" + Convert.ToString(textbox_item_no.Text) + "','" + Convert.ToString(textbox_item_model.Text) + "','" + Convert.ToString(textbox_item_description.Text) + "','" + Convert.ToDouble(textbox_item_sale_price.Text) + "',@item_image)", GlobalVarClass.globalCon);
conv_photo();
cmd.ExecuteNonQuery();
Please give me solution this problem.
Waiting for your reply.
Thanks and regards
Your truly,
Hasnain Ahmad
[email protected]

I strongly recommend that you change your command from using string formatting to build up the command to a simple command that uses parameters. This will: a) clean up your code so it is understandable, b) prevent SQL injection attacks which your current
code is fully vulnerable to, c) help more easily identify which parameter you aren't actually setting.
//Not validated against the compiler so there may be syntax errors
var cmd = new OleDbCommand("INSERT INTO tbl_items(category_id,item_no,item_model,item_description,item_sale_price,item_image) Values (@categoryId, @itemNo, @itemModel, @itemDescription, @itemPrice, @itemImage)", GlobalVarClass.globalCon);
cmd.Parameters.AddWithValue("@categoryId", Convert.ToInt32(textBox1.Text));
cmd.Parameters.AddWithValue("@itemNo", textbox_item_no.Text);
cmd.Parameters.AddWithValue("@itemModel", textbox_item_model.Text);
cmd.Parameters.AddWithValue("@itemDescription", textbox_item_description.Text);
cmd.Parameters.AddWithValue("@itemPrice", Convert.ToDouble(textbox_item_sale_price.Text));
//This is the parameter that doesn't seem to have any value so replace ?? with the variable holding the value of the image
cmd.Parameters.AddWithValue("@itemImage", ??);
conv_photo();
cmd.ExecuteNonQuery();
Michael Taylor
http://blogs.msmvps.com/p3net

Crystal Reports 10 error while saving report

Last week i had a problem while saving my report.
I get the following error while saving my report:
crw32.exe has encountered a problem and needs to close
The only way to get around this was after every change build a preview and close the preview and after that save the report.
On the internet i found someting about installing the latest service pack, so i did.
After that i had the problem described in the following thread: Re: Changing datasource causes parameters to blank out
Sometimes the field to fill a parameter are gone.
The solution is to downgrade to service pack 5, but on the download page [https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm] i can't find sp5, only sp3, sp4 and sp6.
I'm downloading sp5 now, but does anyone know if this solve the problem?
Many thanks
Edited by: Joris Stoop on Aug 21, 2008 11:53 AM

Hi Joris,
please find here [SPs for CR 10 |http://resources.businessobjects.com/support/additional_downloads/service_packs/crystal_reports_en.asp#CR10] including [Service Pack 5 - ZIP - released August 2006|http://resources.businessobjects.com/support/support/communitycs/FilesAndUpdates/cr10win_en_sp5.pdf]
and the [Readme - PDF|http://resources.businessobjects.com/support/communitycs/FilesAndUpdates/cr10win_en_sp5.zip] but unfortunately I do not know if this fixes your prob.
Best regards
Falk

Problem while saving

Similar Messages

Maybe you are looking for