Problem with airport express connected to a lan with proxy

*in my university exist a lan network with proxy config and port.*
*i searched in the config mode but nothing guide me.*
*If someone know how connect it please answer this topic*
Jf

I think I have it on the right setting - what do I select in the settings?!
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.
It said it was going to take an hour to transfer a 250meg file, so thats definitely still going over wifi.
It still going over wireless is correct. Remember your Mac Pros are connecting to the network over a wireless connection. So, for example, when you send a file from one Mac Pro to the QNAP, that file must first travel to the AEBSn (by wireless), then to the AXn (by wireless), before it makes it to the QNAP by wire.
The other option, which theoretically, should improve the data transfer rate, would be to configure both base stations into an extended network. In this type of network, the AXn would be an extension of the AEBSn's wireless network and its Ethernet port would still be enabled for the Ethernet switch.

Similar Messages

Problems Printing: Airport Express connected HP Laserjet M1319f

Hello,
I have an Airport Express connected via ethernet to my network. Attached to it is a HP LaserJet M1319f MFP printer, via USB. I can get my iMacs and my Windows systems to print to the printer without a problem.
I would like to be able to print logs to it from my OS X Server (10.6.7), which is located quite a distance from the printer. So far, I've had absolutely no luck configuring the Airport-attached printer and getting it to work. From what I've been able to figure out, OS X Server expects any remote printer that it attaches to, to be attached via IPP, TCP/IP, or via Windows. It doesn't seem to want to discover and use the printer via Bonjour.
Any ideas on how I can make this work? Am I missing something obvious?
Thanks!
Sven

See if these guides help, it sounds like a driver issue. Does the printer work correctly when directly connected to the PC?
Ensure that the Macs are not sharing the printer, as this is not needed and the PC should be able to find the printer on the AX.
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
http://www.ifelix.co.uk/tech/1004.html
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
http://www.ifelix.co.uk/tech/1008.html
Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
http://www.ifelix.co.uk/tech/1012.html

Problem Keeping Airport Express Connected

Hi,
I have just bought the latest version of Airport Express to replace my original Airport Express.
After updating to Mountain Lion, I was regularly getting error 15006 with my old express so I thought it was time to upgrade!
I have set up my new Airport express to join my existing network and use Airport to stream itunes to my hi-fi. However, I keep losing connection and the Airport Utility shows ! and when I click on Airport Express Icon that tells me "Device not Found" and that the airport express was previously part of my network.
Rebooting Computer sometimes solves the problem but I have had to try resetting. When I do manage to get connected, I keep the connection for as long as I am playing music. If I stop and restart later the connection is lost.
I also have an Ipad. Whilst writing this I tried and sucessfully connected to my Airport Express. I now checked Airport Utility and my connection had been restored.
What's going on? Is there anything I need to do to maintain connection?
Jim

Hi,
Thanks for your comment.
I have a BT Homehub 3 and I believe there are Some unresolved issues with using airport with this router.
Does anyone have any suggestions.
Jim

Desktop PC with Airport Express connected to another router

Hi, I'm new to the wireless world. I have an exsisting wired network with wired connections. The router is a Belkin which also does wireless. I have another desktop computer which I cannot get wires run to so easily. My idea is to use my Airport express's ethernet port for this desktop and wirelessly connect the Airport express to the main router for internet services. Is this possible?
Thanks
Steve

Configure the Express as a bridge: join the wireless network, and set "connection sharing" to "off (bridge mode)". Under the Wireless tab, see if there's a box labeled "allow Ethernet clients".
If there is, check the box.
The "n" model Expresses that are capable of this were first sold in March, 2008. Earlier "b/g" only ones may be capable of this too; I just never had one so that's the reason for the qualifier.

Airport express connecting on home LAN

HI, my home is wired for ethernet and I have been trying to get my airport express to work off one of the ethernet jacks, but after setup I just get blinking orange. If I try to set it up directly to the cable modem it works, so there must be something going on inside the router I have for the LAN that blocks it from getting a "green light". Does anybody know how to solve this issue?
Thanks

Try my explanation from this thread,
http://discussions.apple.com/thread.jspa?threadID=809835&tstart=0

Problem w airport express connection - have tried everything! please help!!

Hi,
my powerbook does not detect my base station (another computer at home does so the base station seems to be working) but it does detect other networks. I have allready tried to reset the basse station (many times) but it doesen't help, when I go to Airport Admin Utility there is no base station (I cannot push configure) - when I push Other - it does not accept the base station password (have also tried "public" as they suggest in help). (when I have gone to Airport Setup Assistant it does not detect my basestation) This has happened before and then I could fix it now it seems to be unfixable. Can anyone out there help me???

HI Agnes,
To check your OS to see what version you are running. Click on the Closed Apple in the most upper left corner of your screen. Then scroll to About this Mac. a window will appear and will tell you some basic info. like what version OS you are running. If you want to know more about your computer then click on " more info. " button. A program called System Profiler will launch and give you all the info on your computer.
As for Airport you can find out what version you have in the System Profiler. Just toggle the Software triangle and click on software. this might take a minute or so depends on how many programs you have. then find Airport and then you will know what version you have.
Another way to find out what Airport version you are running is to launch/open the Airport Admin Utility app. you can find it in Applications folder>Utilities Folder>Airport Admin Utility. After it is open click on Airport Admin Utility in the most upper left corner of your screen just to the right of the closed apple. scroll to About Airport Admin Utility and click. a small window will appear and you will know what version you are running.
As for Firmware on your Airport Express, Airport Admin Utility needs to detect it before you can find out what version you are running. I have not tried to install the firmware update with out my Airport Admin Utility not detecting it. Not sure if it will work.
Ok I hope this helped...

Ps3 and ps vita had a poor connection with airport express but it works well with my macbook air and iPad and my iPhone , anyone can help please?

please advice!
i am using the 802.11n (2nd generation)

I have already tried this but still the same. I have also tried un-pairing my speakers and re-pairing! Still get broken playback at times. This even happens when I am close to the bluetooth receiver.

Airport Express Speaker output very quiet with 60-cycle hum

I've previously hooked up my Airport Express to my stereo system via AirTunes, and it worked fine. But I just moved and set up my home network with my Airport Express connected to the stereo with the mini-stereo adapter. But now, when I play music over AirTunes, I can hear the music very faintly, but it's about the same volume as a 60-cycle electrical interference hum, and definitely not listenable. So I know the music is streaming and the AirPort is receiving, but I'm wondering if it's an electrical problem with the AirPort or output jack, or is there some software or hardware fit I can do myself. I've plugged in & out the cord, it works with an iPod, it's connected to a non-Phono jack of the stereo (AUX port), and I've reset the AirPort Express unit. Any other suggestions? Thanks in advance.

Hello AOSmith. Welcome to the Apple Discussions!
To rule out your stereo or audio cable, try substituting a pair of stereo headphones plugged directly into the AX's audio port. Do you still hear the hum? If so, then the problem is either with the AX itself or the power source is not properly shielded. Try connecting the AX to a known good power strip; one that has surge protection and/or noise cancelling capability would be ideal, and then, plug this into the outlet that you had the AXn connected to. Did this help? If not, then unfortunately, the problem may be with either the AX's audio and/or power circuit.

Airport express connect with Imac via lan line or can not?

I using IMac with connect to internet with DSL modem router (having 4 lan ports).
Now I put Airport express connect with one of Lan ports from DSL router and still connect my IMac with DSL router via lan line and still connect to internet via lan line (switch off airport function in Imac).
The Airport express is using for provide wireless internet and printer to my other PC.
My Question is can I still set up as above and connect share file to my PC via airport express?
Forget to tell that I'm very newby to mac.

chounws, Welcome to the discussion area!
Yes you can do that. Configure the AirPort Express (AX) to operate in bridge mode (not sharing a single IP address).

My two iMacs frequently go offline when I have our iPad and two iPhones-5 connected with Airport Express (2nd edition). If I disable WiFi on my three "i" devices no problem. Any thoughts on this?

My two iMacs frequently go offline when I have my iPad and two iPhones-5 connected with Airport Express (2nd edition). If I disable WiFi on my three "i" devices the offline problem stops. Any thoughts on this?

.....doesn't that seems to suggest the modem?
That is what I have suggested....twice now. From posts above:
My opinion would be that it is likely not the ISP, unless you have complete loss of Internet service for all devices at the same time......it is the Comtrend device....
and
I believe that the problem lies with the modem, and not the ISP signal.
Your ISP will likely have a different opinion, though. Please keep us posted on your progress.

Time Capsule with (2) AirPort Express connection problem

I have (1) Airport Time Capsule with (1) AirPort Express connected. I'm trying to connect another Airport Express but only get a yellow light on the 2nd Express. If I connect it with a ethernet cable I get a green light. How do I connect a 2nd Express?

The 2nd Express needs to be about the same distance from the Time Capsule as the 1st Express....and....it cannot be closer to the 2nd Express than it is to the Time Capsule.
The reason for this is that the Express will pick up the strongest signal and you want the Express to pick up the Time Capsule signal to be able to extend it.
Then, start over as LaPastenague instructs on the 2nd Express and configure it again.

Comcast Internet connection no longer works with Airport Express

This is a little bit out of my depth, so I'm hoping that someone can help me.
I've been accessing Comcast High Speed Internet through my Airport Express connection for more than a year. Things were great until last week when my connection stopped working. The only way I'm able to access the internet is by connecting my iBook directly to the modem.
I tried resetting my Airport Express. I even did it manually so I could manually enter the DNS Servers and Domain Name. That worked for about two days, but now I'm back to where I need to connect directly to the modem.
Maybe there's something I'm not doing correctly. I'd appreciate any help I could get.

gerasco, welcome to the discussions,
It sounds like you are doing everything right and the AirPort Express may be acting up.
Normally, you would reset this device by plugging it in and holding in the reset button until the amber light flashes rapidly.
This time, try a hard reset as follows:
Unplug the AirPort Express
Hold in the reset button and CONTINUE to hold it in as you plug in back in to power
Release the reset button after approx 10 seconds.
Setup the Express again and see if that helps. If you continue to experience problems with the Express, it is likely that it will need to be replaced or repaired.
Please post back on your progress.

IPad and iPhone 4 and new 5s drop connection with airport express. This just started recently after working fine for a year. PC does not drop. Wifi signal fine. Help?

Streaming music with airport express and Apple TV to 2 different systems. No problem with Apple TV. iPad and iPhone 4 and new 5s keep dropping their connection to airport express. Airport express connection to wifi appears to be fine. No dropping by windows PC. This just started recently after working fine for a year. Help?

What does any of this have to do with the Apple TV?

How connect to 802.1x (PEAP) ethernet with Airport Express

Can´t figure out how to connect the Airport Express to an ethernet configurated with 802.1x (PEAP).
It is no problem connect directly to the ethernet to my iMac, something I do with "Internet connect" (but then I can´t share my connection with any laptops etc.)
Can anyone explain how I can solve this problem? Would expect it´s possible through the "Airport-admin"-utility?
Thanks.

Yes but that doesn't help, the Apple TV still has to connect to the Internet in order to set the time for the time zone. It can't do that as it isn't connected due invalid certificates- due to the wrong time!
This is a plea to apple. Now you have updated apple configurator to put Apple TV on enterprise networks please can you allow us to set the time manually so we may join them!

Set up Airport Extreme with 2 Airport Express connected by CAT5??

I recently bought an Airport Extreme base station and an Airport Express. My plan was to use to Airtunes with my AV receiver in my basement. Unfortunately, because the distance between these two areas is long (and separated by two floors) I'm not able to get a strong enough signal with the Airport Express to use Airtunes. I bought another Airport Express to put on the middle floor of our house but the signal in the basement was still not strong enough even with this addition.
I do have a way of connecting the middle floor of our house with the basement area by a CAT5 ethernet cable. My plan now is to connect the two Airport Express modules by their ethernet ports with this cable. The Airport Express on the middle floor connects with the Airport Extreme base station wirelessly without any problems. My question is what is the proper setup for the 2nd Airport Express connected by ethernet in my basement.
Airport Tech support said this could be done. They recommended setting up a new wireless network with the 2nd Airport Express by "fooling" into thinking it was connected directly to the router but using the same network name with a different wireless channel as my Airport Extreme base station. This setup actually works for several hours but then the Airport Express module that is connected to the Airport Extreme blinks amber. Interestingly the 2nd Airport Express with usually remain with the green light on.
Does anyone have any suggestions for the best way to set this up regarding network configuration with the Airport Utility?
Thanks

wmskaggs, Welcome to the discussion area!
They recommended setting up a new wireless network with the 2nd Airport Express by "fooling" into thinking it was connected directly to the router but using the same network name with a different wireless channel as my Airport Extreme base station.
That will work with as long as the AirPort Express (AX) is connected via Ethernet. The only other setting you need to make is to configure it to act as a bridge (not sharing a single IP address).
If this one looses connection, then something is wrong with the AX or the Ethernet connection (cable and/or connectors).

Problem with airport express connected to a lan with proxy

Similar Messages

Maybe you are looking for