Problem with BAPI_GOODS_MVT ( TA MB1B, 'E', Move Type 412 )

Hello,
I need some help please
I use BAPI_GOODSMVT_CREATE
gmhead-pstng_date = sy-datum.
gmhead-doc_date   = sy-datum.
gmhead-pr_uname   = sy-uname.
gmcode-gm_code    = '04'.   "MB1B
BAPI_ITEM-MATERIAL   = <out>-matnr.
BAPI_ITEM-PLANT      = '5314'.
BAPI_ITEM-STGE_LOC   = '0040'.
BAPI_ITEM-BATCH      = '0000345632.
BAPI_ITEM-MOVE_TYPE = '412'.
BAPI_ITEM-SALES_ORD = '1753400142'.
BAPI_ITEM-S_ORD_ITEM = '000010'.
BAPI_ITEM-SPEC_STOCK = 'E'.
BAPI_ITEM-ENTRY_QNT = <out>-menge.
it is showing an error message:
M7 073 " Enter a sales order for special stock 'E'
but I have passed parameter: SALES_ORD and S_ORD_ITEM !!
Beforehand thanks!

Hi,
Pass the sales order and item to folowing fields,
VAL_SALES_ORD
VAL_S_ORD_ITEM
in GOODSMVT_ITEM
Regards

Similar Messages

Difference between Mb1b 541 Mov type and ME2O

Hi,
I want to know difference between Mb1b 541 Mov type and ME2O.
Thanks and regards
Gitesh

Hi,
ME20 has 2 options one to directly transfer, that is without delivery. And, anotehr is with delivery.
Option 1 will create a material document in ME20 transaction.
With option 2 it will create a delivery note. you have issue the material in vl02n if delivery note is created and then material documetn will get generated.
regards
alexandro.

I recently upgraded our iMac to Yosemite OS and now have a problem with Photoshop Elements 11: the move tool selects an image or text layer, but then I try to drag the selection somewhere else on the page and it snaps back to the original location, howev

I recently upgraded our iMac to Yosemite OS and now have a problem with Photoshop Elements 11: the move tool selects an image or text layer, but then I try to drag the selection somewhere else on the page and it snaps back to the original location, however the arrows will move it OK. Also I cannot drag the selection to another photo in the photo bin as before.

Hi,
Please refer: http://helpx.adobe.com/photoshop-elements/kb/pse-stops-responding-yosemite.html
Thanks,
Anwesha

I have a problem with the audio on a movie I downloaded

I am having a problem with the audio on a movie that I downloaded. It is scratchy and difficult to listen to. How can I fix this?

Depending upon what country that you are in (films can't be re-downloaded in all countries) then try deleting the film from your iTunes library and redownload it via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes (or delete it from your iOS device and redownload it via the Purchased tab in the iTunes Store app on it)
If you aren't in a country where you can re-download films or if it re-downloads with the same problem then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Valuation of subsequent Transfer Postings with Movement Type - 412 Q

Hi,
We are procuring raw material by raising Purchase order (without account assignment) and receiving it as unrestricted stock i.e. Plant stock.
Whenever the material is required for a particular WBS element, then we are transferring the Plant stock to Project stock with Movement type 412 Q. That special stock is being used for Production orders which are created wrt that WBS element.
Current valuation of Transfer posting with Movement type 412 Q is as follows.
1. When we transfer the Plant stock to Project stock for the first time then System is valuating that stock at the Moving average price of raw material say Rs.50.
2.After transfer posting, values are being updated in the Table QBEW as well as in the Report MBBS wrt Plant, Material and WBS element i.e Rs.50.
3. Again, when we transfer the Plant stock of same material to Project stock for the same WBS element system is valuating the Project stock at Rs.50 instead of at the Moving average price of that material which is Rs.70 at that moment.
So what we understand is that the system is valuating the further goods movements of that material (Project stock) is at the price of Rs.50 which was stored in QBEW table (which was updated at the first goods movement).
So all consumption of that material (Project stock) is valuating at Rs.50, which is not resembling the Moving average price.
Is there anyway to valuate the subsequent transfer postings of Plant stock to Project stock with the moving average price valid at that moment instead at the the price which is updated in QBEW table for the first goods movement?
We can change through MR21, but it is not practically feasible to change the price at each and every time for Plant, WBS element and material. combination.
Thanks & Regards
Madhusekhar Gupta G

Please read the explanation about the design with 412 Q movement in OSS Note 180503 - Val. logic during transfer posting with reversal movem. type

MIGO, movement type 412 E

Hi,
I am attempting to create a reservation against a sales order using transaction MIGO, movement type 412 E. I have entered the sales order number and I am getting the message Document 257 does not contain any selectable items.
I have also created a new item category code and updated it with the special stock indicator 'E'.
Is there anything else that I need to do?
Regards,

HI
check this links
MIGO(SA)does not contain any selectable items
Reservation against the sales order
Regards,
Krishna.
Edited by: kris_hna on Sep 6, 2011 10:58 AM
Edited by: kris_hna on Sep 6, 2011 11:41 AM

Movement type 412 E - cost object

Dear Gurus
When i was doing reservation of Raw material stock to Sales order, by using movement type 412 E, while system showing the cost object error message Why this error is happen? because as my understanding point of view sales order is one of the cost object another one thing morning the same entry happened with out cost object error , but now system showing error
suppose if we assign the default cost center also what will happen , where can i get the effect
This kind of urgent , can anyone give me your suggesstions
Thanks & Regards
Venkatesan

Hi
Your requirement class settings must have had sales order as a cost object
1. Go to sale order, procurement tab
2. Check whats the req type
3. Go to OVZH and check whats the req class assigned to this req type
4. Go to OVZG and check whats the acount assignment cateory in req class.. I think it is E
You should use a proper req class/type to avoid this error
br, Ajay M

Different account posting for movement type 412 E ?How?

Account determination for the stock transfer from own stock to sales order stock:
When we transfer the stock from own stock to sales order stock, the amount which gets transferred from own stock to sales order stock is equal to quantity multiplied by the MAP of the item.
We have a scenario where there is a material A having MAP = 10.Quantiy of own stock for A is 100 EA .Now we have got a sales order for A with a quantity of 20 EA for a particular customer .We need sales order stock for this order at a special purchase rate say 8.
Next we have modified the movement type 412 E in such a way that when we transfer the stock from own to sales order stocks it will ask for the amount of the total quantity transferred. When I transfer 20 EA with movement type 412 E it prompts for the amount where we have provided the value 160(=20 X 8). Then save the posting. Accounting entries which happens are as follows:
Dr Stock    A/C u2013 310000       -
160
Cr Stock    A/C - 310000        -
160
In the process it recalculates the MAP of own stock. New MAP = ((100 X 10) u2013 160)/80= 10.5
We do not want the MAP to be effected in this process. We want a posting as below:
                  Dr Stock    A/C u2013 310000       -
160 (for sales order)
                  Cr Stock    A/C - 310000        -
200 ( for own stock)
                  Dr Gain/Loss account -       -
40
In this process the MAP of the own stock remains as 10.But this type of posting does not happen as long as you have own stock available. Is there any way to do the above posting with movement type 412 E . Reversal entry should be possible with movement type 411 E.
Regards,
Feroz Choudhury

Hi,
I am doing the reverse. Transfering Unrestricted stock to Sales Order stock. So it should appear in MBBS.
But in my case for example, if there is a sales order with 3 items, for 2 items posting is as follows:
Inventory account Dr. .....
Inventory account Cr. .....
But for 3rd item,
Cost of Goods Sold (COGS) Dr. .....
Inventory Cr. ....
So in MBBS, only first 2 items appear and not the third one.
Can u tell me what can be the reason for this.
Regards,
Niraj

Impact of movement type 412 E on MAP

Hi
Usage of movement type 412 E is causing huge change in MAP .
Is there any reciprocaory movement to curb this MAP rise ?
Regards,
Lalit

Lalit,
When you reduce your unrestrited stock by moving to SO stock, your MAP is going up.
So most likely your are doing sale order costing. The sale order could be costing this material at a lower cost than the material price. Hence the balance cost gets settled back to material account & raises your MAP.
This seems technically correct.
However if you do not need MAP to rise/ or reduce then you should turn off sale order costing. So sale order will cost based on material price. Then your issue should correct itself.
Hope this helps. Else please come back.
Thanks,
Ram

HT1657 I am having problems with sound in my rental movies

We rent movies all the time but lately we are having problems with sound for our movie rentals. We watch the first half hour without a problem than the voice is choppy all the time. Sometimes it is good for five minutes than noting for a while. We have tried everything we could think of with no avail. I could see one movie but the last 5 or so have been the same. Done trying we need to fix this! Help! Any ideas?

First try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears. Try again to see if the problem persists.
If you still have the same issue, it's possible that something is lodged in the earphone jack. This can cause the iPad to think earphones are plugged in when they are not. Use a vacuum to try to suck any dust, lint or other foreign matter from the jack. If that still doesn't work, try CAREULLY using a toothpick.

Problem in Goods receipt of serializedspare (Movement type: 262) on Maintenance Order

Dear Experts,
When i create a maintenance order for equipment and assign serialized spare parts With negative sign and valuation type damaged then i go to T-code MIGO to receive the spare parts (Movement type 262), the below error message has been showed up. This is because, I want to receive the spare part into the warehouse with valuation type (Damaged) differ from the valuation type of issuing it at the first time (Under test)
So is there a way to receive a spare part with the same serial number on a different valuation type than that one it has been issued upon it firstly.

grating jagdeep
this screen shoots for what you have asked for

Problems with audio when exporting to movies

Hi All,
I teach sequencing and one of the projects is to score a short piece of music to film. Logic Pro 9 is great for this (though beat mapping isn't the most friendly of functions) and my students (most only 16-18 years old) have made some great projects.
Right the question is what are the best settings to use when exporting the audio to movie? Some students don't get any sound when bounced or some are getting the oprginal with the new audio (doubled).
To assess and store student work we use vimeo for video projects and the wierdest thing is that when uploaded these bounces (the ones that worked) have no sound at all.
Never had these issues with Logic 8 and just wondering if anyone has any ideas on how I can resolve this?
Thanks and happy new year.

I've used flip4mac for about a year and have had no problems with it. I mostly use it to export preview versions for windoze people. The quality is very good, though it takes significantly longer to export than a similar-quality quicktime movie.

Pairing problem with motorola v330: misdetected as another type of device

ok, this actually seems to be a problem with the phone, but I'm posting here anyway in case someone has any ideas.
My mini core duo recently arrived and one of the first things I did was to try to pair my bluetooth devices: apple keyboard and mouse, scala 500 headset, and the motorla v330. When I fire up the bluetooth setup assistant, go through setting up the keybpoard and mouse, and then try the phone. It sees the phone but it's listed as a keyboard (after choosing "any device" in the asssistant). Hmm, this never happened with the 12" powerbook.
Get out the powerbook (that has previously paired with this phone) and run the assistant, choosing "any device". Two things pop up one after another, the mini and the phone. This time the phone is listed as a computer.
Ok, this is getting really odd. I try again on the mini and this time it shows up as a computer. This time there were no other bluetooth devices powered on in the area.
So, it seems that if you start the pairing process with any other unpaired device that is discoverable, the phone assumes and remembers the type of device that the other device is. Even after powering the phone off and on.
btw, both machines are running 10.4.5
mini duo core and 12" powerbook 1GHz Mac OS X (10.4.5)

I just tried to pair it with a windows xp machine and it was detected as a phone.
I just tried again on the mini, and it's still showing up as a computer. So I started the assistant again, and this time chose "mobile phone" instead of "any device" and it showed up!
I swear it was showing "0 devices found" when I chose "mobile phone" before... anyway, finally, I have them paired, and the phone is available in isync. (I had previously paired up when it was showing up as a keyboard to see if it was in isync, but isync didn't see it)

I'm having a minor problem with "screen drift" - the page moves slightly up and down when moving my mouse around the screen, and continues to do so after stoppi

I've installed the latest version of Shockwave, updated the driver from Logitech for my mouse (Logitech M525), tried both full screen and regular modes, restarted Firefox repeatedly. This drift is very annoying - I spend the majority of my time on FB - seems like the amount of drift varies from not at all to "damn it, I can't even place my mouse on an object without the screen moving".
I'm on Windows 7 with an Acer V5-671 laptop - help please!

You can check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Accounting document for Movement Type 412 E

Dear Friends,
Is it normal the system create FI document when we use 412 E movement type to transfer unrestricted stock to Sales Order stock.
Also the system sometimes debiting to COGS account and sometimes to inventory. On what basis it posts to inventory or COGS account?
Help will be greatly appreciated.
Regards,
Niraj

Hi,
I am doing the reverse. Transfering Unrestricted stock to Sales Order stock. So it should appear in MBBS.
But in my case for example, if there is a sales order with 3 items, for 2 items posting is as follows:
Inventory account Dr. .....
Inventory account Cr. .....
But for 3rd item,
Cost of Goods Sold (COGS) Dr. .....
Inventory Cr. ....
So in MBBS, only first 2 items appear and not the third one.
Can u tell me what can be the reason for this.
Regards,
Niraj

Problem with BAPI_GOODS_MVT ( TA MB1B, 'E', Move Type 412 )

Similar Messages

Maybe you are looking for