Problem with BAPI_GOODSMVT_CREATE to transfer stock

Hi all,
i met a problem when i use BAPI_GOODSMVT_CREATE to transfer stock from one stock to another stock (one step).
parameters:
Goodsmvt_code = '04' " MB1B
Material,Plant,Stge_loc,Batch,Move_type,move_plant,Move_stloc,Move_batch
Matdoc_item,Serialno
then execute the bapi. i get the successful result.
but when i check the stock, nothing happened.
i also check the table SER03. the material documents didn't generate.
i use MB1B to do it directly. the material is transfered and the material documents also generated.
can anyone tell me what's wrong and what should i do? thank you very much.

Dear Dave,
Actually the Bapi that you user is a Test Function , so it will not posted,just do simulation, you need to copy the FM to program then commit it, then it will post the document.
Regards,
w1n

Similar Messages

Problems with my Ipod, transfer from Ipod to computer.

I have problems to get my files from my Ipod to my computer, after i had some problems with the computer and formated it.
Now i can't get any songs from my Ipod to my computer.
BUt i can do it the other way, from my computer to my Ipod.
I hope there is someone that can help me, since I did transfer all my music from my computer to Ipod before formating it and now i can only play it on my Ipod. To bad if you ask me and i do not want to loos all my music.

I did try, but then i might loos all that i do have on my Ipod and that would be very bad. So the problem is still there and i do want to keep all that i do have on my Ipod.
Since i have bought all of it from I tunes and i have formated my computer and lost all of it from that one, then i did transfer all to the Ipod to save it, but now i can still only play it on my Ipod.

Problem with itunes file transfer.

hello,
l recently purchased another PC windows 7 64 bit. l installed Itunes 64bit . l have a problem when trying to transfer files (video or any other) from my pc to my ipad using Itunes; it freezes and crash. l am using and app called EZ file which plays any video file not that l think that does matter.l never had any issue with it. l used another PC to do the same thing and it worked. l try re-installing Itunes but it does the exact same thing.
this is the error message that i get;
Problem signature:
Problem Event Name:          APPCRASH
Application Name:          iTunes.exe
Application Version:          10.6.1.7
Application Timestamp:          4f71aced
Fault Module Name:          objc.dll
Fault Module Version:          1.435.16.11
Fault Module Timestamp:          4ee7d01f
Exception Code:          c0000005
Exception Offset:          000085f4
OS Version:          6.1.7601.2.1.0.256.48
Locale ID:          1033
Additional Information 1:          0a9e
Additional Information 2:          0a9e372d3b4ad19135b953a78882e789
Additional Information 3:          0a9e
Additional Information 4:          0a9e372d3b4ad19135b953a78882e789
any thoughts??

In iTunes, Advanced>Create iPod or iPhone version

7914, Problems with "Hold" and "Transfer" appearance

We have a site that is experiencing problems with the line appearances on the 7914s that the assistances have in order to view their manager's extensions.
The Line text label is configured for "Name + DN" so the assistant can keep track of the lines when they ring and the CID appears next to the LTL.
When the call is picked up via the 7914 and transfered, the line text label on the other 7914's in the office change from displaying the "Name + DN" to the name of the person who transfered the call.
This is very confusing for the staff who is trying to keep track of the calls and who they are for.
Is there any way to prevent this from happening, or alternatively, to have line text label appear ALL the time and never CID or the transfering partys name appear??
Thank you for any help or assistance with this!

Any ideas? I'm guessing this is a "feature" that cannot be changed?
Thanks

Problem with Log and transfer using AVCHD

Hello,
I was wondering if I can get help. I use a Canon Vixia HF S200 and FCP Version 6.0.6
I have produced projects on my MacBook Pro 2.33 Ghz Intel Core 2 using this process before with no problems in the past. This problem just started and I dont know what has changed. When I open the Log and Transfer (LT) window I can see and hear all my video from the AVCHD folder in my harddrive just fine, I can scrub with no prob.... But when I add clip to Queue I get an red circle with exclamation on my status.
I have changed the settings on the preferences to Apple intermediate Codec and the audio to plain stereo.. no luck there, the video still will not transfer to my bin.
I have made sure that the toggle Queue state was the little arrow instead of the paused icon...no luck there either... i got a message that says clip queued transferring but nothing is happening.
I will appreciate your help!
Also I didn't mean to tread jack earlier, please accept my apologies, if anybody saw that...

OK!!!!! This seriously cost me 1 day of my life that I'll never get back!!! lol
So I was able to bring the footage in on to Imovie...Yes, I was that desperate...deadlines do that!
Edited the entire project there...kinda sucked...
Then I had the bright idea that if I was able to bring the videos in to Imovie, on my local HD...than something may be wrong with my scratch disk that I use on FC...its a USB disk, specs =slow.
So I changed the scratch disk and yes "Davi S" for good measure I also deleted the Pref files.
So it working again...here I go editing on FC after I edited the entire project on Imovie...
Thanks for all your help!

Problem with BAPI_GOODSMVT_CREATE and MAA

Hi experts,
   I'm trying to GR a PO with MAA (Multiple Account Assingment) by using BAPI_GOODSMVT_CREATE.
   My problem is that, as is a return delivery, BAPI is checking wether the reference doc, position and year have been populated for the MAA related positions.
   This is done in method CL_MMIM_MAA_2 --> MAA_ITEM_DUPLICATOR_BAPI. As ain't populating those fields, BAPI returns error message M7 465 and not EM document is created.
   But, when doing the same by using MIGO transaction, document is created as there is not validation for reference document, because MIGO is using method CL_MMIM_MAA_2 --> MAA_ITEM_DUPLICATOR_MIGO.
   I've ssearched fot SAP NOTES (1654305) and SCN posts, with no results.
Can someone explain how to do a return delivery with MAA by using BAPI_GOODSMVT_CREATE?. Is there any way to avoid the validation when using the BAPI?.
Thank you so much in advance.
Regards,
Carlos.

Hi,
   I think the reason and the solution for the error M7 465 is well explained in the note: 1654305 - MAA2 error M7 599 during return delivery GR with BAPI
   If the note is applicable for you and still the problem is not solved with the note, you may cross check the changes mentioned in the note and you may raise an OSS ticket to SAP.
Regards,
AKPT

Problem with bapi_goodsmvt_create

hi all,
iam using bapi_goodsmvt_create to do a goods recipt for a PO. while running the error message iam getting is
"No goods receipt possible for PO 2200000065 010". But i can do it manually the recipt using MIGO for that PO & if i delete that Goods Recipt manually and if i run the program again, the program is picking that PO and its recipting properly as expected.
the requirement is it should do it for the first time itself, rather than receipting manually & deleting that receipt & running the program again
Help me in this issue,
Cheers,
Prem.

here is the program...
The following is an abap program making used of the BAPI function BAPI_GOODSMVT_CREATE to do Goods Receipts for Purchase Order after importing the data from an external system.
BAPI TO Upload Inventory Data
GMCODE Table T158G - 01 - MB01 - Goods Receipts for Purchase Order
                     02 - MB31 - Goods Receipts for Prod Order
                     03 - MB1A - Goods Issue
                     04 - MB1B - Transfer Posting
                     05 - MB1C - Enter Other Goods Receipt
                     06 - MB11
Domain: KZBEW - Movement Indicator
     Goods movement w/o reference
B - Goods movement for purchase order
F - Goods movement for production order
L - Goods movement for delivery note
K - Goods movement for kanban requirement (WM - internal only)
O - Subsequent adjustment of "material-provided" consumption
W - Subsequent adjustment of proportion/product unit material
report zbapi_goodsmovement.
parameters: p-file like rlgrap-filename default
                                 'c:\sapdata\TEST.txt'.
parameters: e-file like rlgrap-filename default
                                 'c:\sapdata\gdsmvterror.txt'.
parameters: xpost like sy-datum default sy-datum.
data: begin of gmhead.
        include structure bapi2017_gm_head_01.
data: end of gmhead.
data: begin of gmcode.
        include structure bapi2017_gm_code.
data: end of gmcode.
data: begin of mthead.
        include structure bapi2017_gm_head_ret.
data: end of mthead.
data: begin of itab occurs 100.
        include structure bapi2017_gm_item_create.
data: end of itab.
data: begin of errmsg occurs 10.
        include structure bapiret2.
data: end of errmsg.
data: wmenge like iseg-menge,
      errflag.
data: begin of pcitab occurs 100,
        ext_doc(10),           "External Document Number
        mvt_type(3),           "Movement Type
        doc_date(8),           "Document Date
        post_date(8),          "Posting Date
        plant(4),              "Plant
        material(18),          "Material Number
        qty(13),               "Quantity
        recv_loc(4),           "Receiving Location
        issue_loc(4),          "Issuing Location
        pur_doc(10),           "Purchase Document No
        po_item(3),            "Purchase Document Item No
        del_no(10),            "Delivery Purchase Order Number
        del_item(3),           "Delivery Item
        prod_doc(10),          "Production Document No
        scrap_reason(10),      "Scrap Reason
        upd_sta(1),            "Update Status
      end of pcitab.
call function 'WS_UPLOAD'
exporting
    filename                      = p-file
    filetype                      = 'DAT'
IMPORTING
FILELENGTH                    =
tables
    data_tab                      = pcitab
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
OTHERS                        = 6
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
          with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
exit.
endif.
gmhead-pstng_date = sy-datum.
gmhead-doc_date = sy-datum.
gmhead-pr_uname = sy-uname.
gmcode-gm_code = '01'.   "01 - MB01 - Goods Receipts for Purchase Order
loop at pcitab.
itab-move_type = pcitab-mvt_type.
itab-mvt_ind    = 'B'.
itab-plant      = pcitab-plant.
itab-material   = pcitab-material.
itab-entry_qnt = pcitab-qty.
itab-move_stloc = pcitab-recv_loc.
itab-stge_loc   = pcitab-issue_loc.
itab-po_number = pcitab-pur_doc.
itab-po_item    = pcitab-po_item.
concatenate pcitab-del_no pcitab-del_item into itab-item_text.
itab-move_reas = pcitab-scrap_reason.
append itab.
endloop.
loop at itab.
write:/ itab-material, itab-plant, itab-stge_loc,
          itab-move_type, itab-entry_qnt, itab-entry_uom,
          itab-entry_uom_iso, itab-po_number, itab-po_item,
                                              pcitab-ext_doc.
endloop.
call function 'BAPI_GOODSMVT_CREATE'
exporting
    goodsmvt_header             = gmhead
    goodsmvt_code               = gmcode
TESTRUN                     = ' '
IMPORTING
    goodsmvt_headret            = mthead
MATERIALDOCUMENT            =
MATDOCUMENTYEAR             =
tables
    goodsmvt_item               = itab
GOODSMVT_SERIALNUMBER       =
    return                      = errmsg
clear errflag.
loop at errmsg.
if errmsg-type eq 'E'.
    write:/'Error in function', errmsg-message.
    errflag = 'X'.
else.
    write:/ errmsg-message.
endif.
endloop.
if errflag is initial.
commit work and wait.
if sy-subrc ne 0.
    write:/ 'Error in updating'.
    exit.
else.
    write:/ mthead-mat_doc, mthead-doc_year.
    perform upd_sta.
endif.
endif.
      FORM UPD_STA                                                  *
form upd_sta.
loop at pcitab.
    pcitab-upd_sta = 'X'.
    modify pcitab.
endloop.
call function 'WS_DOWNLOAD'
    exporting
      filename                      = p-file
      filetype                      = 'DAT'
IMPORTING
FILELENGTH                    =
    tables
      data_tab                      = pcitab
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
OTHERS                        = 6
endform.
*--- End of Program
points please...

Problems with IPhoto after transfer from Mobile Me

It seems that most of the necessary transfer out of of Mobile Me was accomplished, but I am still somewhat confused where my Gallery went to and now my IPhoto program keeps telling me that it is synchronizing to my service provider (Comcast), but it has been going on forever and I wonder if that is a necessary function? I chatted with the support team of ICloud, but they had no answer. Can anyone help?

Hello sean:
I am not an expert in iPhoto, but people who post here are:
http://discussions.apple.com/category.jspa?categoryID=143
To try to address the browser problem, reset Safari and see if that helps. Also, try an alternate browser (I use Firefox that way) to see if the problem is system-wide. Also, there is a Safari forum here:
http://discussions.apple.com/category.jspa?categoryID=169
Barry

Problems with Draft - Inventory Transfer - SDK 2007

Hi all, I have problems making a Draft document of a Inventory Transfer using the DIAPI, I know that the draft of inventory transfers is new in SBO 2007 and I have the correct version of the DIAPI installed, the problem is that I can't find the property "FromWarehouse", into the Draft Object.
Thanks for help.

Note that the header of this forum specifies:
This forum is dedicated to development and deployment of .Net applications that connect and interact with BusinessObjects Enterprise, BusinessObjects Edge, or Crystal Reports Server. This includes the development of applications using the BusinessObjects Enterprise, Report Application Server, Report Engine, and Web Services SDKs.
I do not think your query concerns any of the above mentioned products? If that is the case, please post to the correct forum.
Ludek

Problem with emoticonized file transfer capabilities multithreaded javaCHAT

Hi, I've got confused with how do i use 1 socket to transfer all needed data for that chat application..
Current progress:
- Server can accepts sockets from listened port and put the socket, dataOutputStream, and name of the client into a hashtable
- Client can interacts globally each other
The problem is:
- I want each socket of each client to be able to handle the chat message as well as the file transfer and etc....How can I differ every data that goes through that socket?
- I've tried to make the file transfer, and somehow be able to put all the file the client send into a hash table in server...BUT when I tried to send the data to another client...I got problem...the data somehow mixed up each other, even tho i put them sequentially..like this:
Server:
else if (message.equals("RECEIVE"))
                         System.out.println("Preparing to receive file...");
                         String filename = din.readUTF();
                         System.out.println("Request for file " + filename + "...");
                         System.out.print(dout);
                         server.takeOutImage(filename,dout);
void takeOutImage( String filename, DataOutputStream dout)
          try
               if (imageFiles.containsKey(filename))
                    dout.writeUTF("ACK");   // we have this file
               else
                    dout.writeUTF("NACK"); // dont' have it
                    return;
               // get file contents from storage
               byte contents[] = (byte [])imageFiles.get(filename);
               // tell client file size
               int togo = contents.length;
               dout.writeInt(togo);
               DataInputStream bytestream = new DataInputStream(new ByteArrayInputStream(contents));
               FileSender.sendInChunks(bytestream, dout, togo, 1024);
               bytestream.close();
          catch (Exception e)
               System.err.println("File receive failed.");
     }Client:
else if (message.equalsIgnoreCase("/receive"))
                    System.out.println("Preparing to receive file...");
                    String receive = "ab.gif";
                    String ack = null;
                    try
                         dout.writeUTF("RECEIVE");   // RECEIVE command,
                         dout.writeUTF(receive);     // ...filename to server
                         ack = din.readUTF();        // get server response
                         System.out.println(ack);
                         if (! ack.equals("ACK"))
                              System.out.println("Server didn't acknowledge receive attempt. Aborted.");
                         else
                              int togo = din.readInt();
                              System.out.println(togo);
                              // receive file contents
                              File file = new File(receive);
                              DataOutputStream filestream = new DataOutputStream(new FileOutputStream(receive));
                              FileSender.sendInChunks(din, filestream, togo, 1024);
                              filestream.close();
                              System.out.println("File received.");
                    catch (Exception e)
                         System.err.println("File receive failed.");
                    tf.setText( "" );
               }It doesn't work sequentially, and being interrupted by this
Client(to accept message):
     public void run()
          try
               while (true)
                    String message = din.readUTF();
                    ta.append( message+"\n" );
          catch( Exception ie )
               System.out.println( ie );
     }Any solution to this?
Best Regards,
William

T-kuz wrote:
No one told me any clue, nor asked me any question...Everyone has different reasons for their own behaviour. Personally I simply didn't see your question.
If you want more/better/faster answers, then a good way to get them is to make a better question. This might mean adding information.
Read [How To Ask Questions The Smart Way|http://www.catb.org/~esr/faqs/smart-questions.html] for a general guide on getting good answers.
even tho i put 10 dukes for this...Dukes are pretty worthless, they don't really help a lot for most people answering questions around here.
I got rid of the problem by adding another socket and thread...I didn't really read the code precisely (another possible reason for no answers: too much code, no really clear problem-definition), but you might need to implement a more fine-grained protocol such like this:
S: <Initiate file transfer for "Foo.png", size: 3000>
C: <Accept, file transfer number is #1>
S: <Part of file transfer #1, offset 0, length 100, data: ...>
C: <ACK> (or leave that out, you're using TCP after all)
S: <some other message>
S: <Part of file transfer #1, offset 100, length: 100, data: ...>
and so on ...
thanks for your "!help" by just viewing...Come on, don't be snarky to the people you want help from. That's rarely a good idea.

Problem with BAPI_GOODSMVT_CREATE not updating Reservation

Hi,
When i do a manual MB1A 'Goods issue' with reference to Work Order it is posting the goods issue and updating the RESB ,but when i do the same through the bapi code 03 Table i was not able to post the goods issue at all. am i missing a input field in the bapi .Plz help me out.
My code.
gf_goodsmvt_code-gm_code       = '03'. "GI
gf_goodsmvt_header-pstng_date = sy-datum.
gf_goodsmvt_header-doc_date    = sy-datum.
LOOP AT it_details INTO gf_details .
    MOVE :gf_details-matnr TO gf_goods-material,
          gf_details-werks TO gf_goods-plant,
          rm07m-lgort      TO gf_goods-stge_loc,
          gf_details-charg TO gf_goods-batch,
          rm07m-bwart      TO gf_goods-move_type.
      MOVE gf_details-issue_qty TO gf_goods-entry_qnt .
      MOVE gf_details-meins TO gf_goods-entry_uom.
   gf_goods-mvt_ind = 'F'.
    gf_goods-reserv_no = gf_details-rsnum.
    gf_goods-res_item = gf_details-posnr.
    gf_goods-res_type = gf_details-rsart.
    gf_goods-withdrawn = 'X'.
   gf_goods-orderid = rm07m-aufnr.
   gf_goods-order_itno = 1.
    APPEND gf_goods TO it_goodsmvt_item.
    CLEAR gf_goods.
ENDLOOP.
IF NOT it_goodsmvt_item[] IS INITIAL.
    CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
      EXPORTING
        goodsmvt_header             = gf_goodsmvt_header
        goodsmvt_code               = gf_goodsmvt_code
TESTRUN                     = ' '
     IMPORTING
GOODSMVT_HEADRET            =
       materialdocument            = g_mat_doc
MATDOCUMENTYEAR             =
      TABLES
        goodsmvt_item               = it_goodsmvt_item
GOODSMVT_SERIALNUMBER       = 'X'
        return                      = it_return.

check below Threads :
Issue related to EXIT statement
and see the sample program :
Structures for BAPI
data: gdsmt_header   like bapi2017_gm_head_01.
data: gdsmt_code like bapi2017_gm_code.
data: gdsmt_headret like bapi2017_gm_head_ret.
data: gdsmt_item like bapi2017_gm_item_create occurs 1 with header line.
data: return like bapiret2 occurs 0.
data: retmatdoc like bapi2017_gm_head_ret-mat_doc.
Setup BAPI header data.
gdsmt_header-pstng_date = sy-datum.
gdsmt_header-doc_date = sy-datum.
gdsmt_code-gm_code = '06'.                                " MB11
Write 262 movement to table.
clear gdsmt_item.
move '262'         to gdsmt_item-move_type.
move i_resb-matnr to gdsmt_item-material.
move p_bdmng      to gdsmt_item-entry_qnt.
move i_resb-meins to gdsmt_item-entry_uom.
move i_resb-werks to gdsmt_item-plant.
move i_resb-lgort to gdsmt_item-stge_loc.
move i_afko-aufnr to gdsmt_item-orderid.
append gdsmt_item.
Determine cost center
    move '0000041430' to gdsmt_item-costcenter.
append gdsmt_item.
Call goods movement BAPI
call function 'BAPI_GOODSMVT_CREATE'
       exporting
            goodsmvt_header = gdsmt_header
            goodsmvt_code    = gdsmt_code
       importing
            goodsmvt_headret = gdsmt_headret
            materialdocument = retmatdoc
       tables
            goodsmvt_item    = gdsmt_item
            return           = return.
Reward Points if it is helpful
Thanks
Seshu

I have problems with my apps transfer

i just got a new computer and my old computer doesnt work anymore and when i click transfer app purchause some of the app doesnt get transfered why? please help??

It sounds like you have purchases that ere puchased with more than one iTunes account. The computer has to be authorized for all of the iTunes accounts that purchased the items. In iTunes click on the Store tab and authorize the computer will all the accounts.

ERMS email push: problem with CAD and transfer

Dear Experts,
We implement ERMS email push scenario: email is received on SAPconnect, processed by ERMS, pushed to CMS (Genesys) and routed back to CRM. We are able to receive the action item and the email pops upon Accept; however:
1/ we are not able to access CAD submitted by CMS (the format of the CAD is correct)
2/ when we try to transfer the action item we get an error message: "CRM_IC_APPL_UI_CHMSG   023   Function cannot be executed; cannot retrieve contact"
We've done a bit of debugging and we've noticed there is no handling implemented for itemchannel = 'action' in IF_CRM_IC_EVENT_LISTENER~HANDLE_EVENT class CL_ICCMP_CCS:
        CASE itemchannel.
          WHEN cl_crm_ic_mcm_contact=>c_channel_telephony.
            CREATE OBJECT contact
          WHEN cl_crm_ic_mcm_contact=>c_channel_email.
              CREATE OBJECT email
          WHEN cl_crm_ic_mcm_contact=>c_channel_chat.
            CREATE OBJECT chatsession
        ENDCASE.
Any ideas?
Many thanks. Mario

Hi Zhi Jie,
Please check this PDF: <http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/30c2f74f-0ee0-2c10-63b1-8a8057ba38d0&overridelayout=true>
It describes pretty well all the steps required to enable ERMS.
For ERMS Email Push you need to ensure your policy rule has two mandatory actions (you'd define them as last ones):
- Push Email to ICI
- Route Email
Note: that means that once the email is pushed to ICI it still needs to be dispatched within CRM i.e. the associated WF needs to be assigned somwhere.
In addition: the system neesd to know to which CMS the action item should be pushed. You need to define it in CRMM_BCB_ADM with CMS ID = ERMS_ACTION.
Hope that helps.
Thanks. Mariusz

Problem with PGI - Sales Order stock does not exist

Hi
I created order 58161 with 1 item line (10).
Did a delivery and created a Picking Request (which i released via transaction VL08).
When i try to do PGI i get following message:
Sales order stock 58161 000010 does not exist.
I have previously done a similar order with same material and so on and it went through the system without a hitch.
I have checked the other threads, is this where i have to use MB1B and mov.type 412 E to move unrestricted goods to sales order stock?
Thx
RM

Hi,
first u check stock at tcode:MMBE for ur material ,plant and storage location.If u dont have stock than create stock through goods receipt:mb1c.[movement type 501 e,enter ur sales order no.,item no.],I think it will solve than

Problem with blocking of the stock by the contract

Hello,
Can you please tell me, why the line 20 in my Contract 12505100 is still blocking the stock, while we cancelled this line?? It is visible in the transaction MD04.
how can I remove it from the MRP ?
Thanks in advance!

Thank you very much Jürgen the problem is solved!!!

Problem with BAPI_GOODSMVT_CREATE to transfer stock

Similar Messages

Maybe you are looking for