Problem with config.txt size 32kb

      Hi, Some body can help-me about how can I store the file config.txt on Cisco aironet AP1231g  when the size of this file is more than 32kb (ex: 45kb long)?,  the size of the NVRAM is 32KB.
      After I have had a error message of buffer size, i was send BOOT BUFFERSIZE  80000, it solved the error, but the file was not stored in NVRAM because of the size limit of 32KB.

Have you tried
d:\\mydir\\myconfig.txt ??

Similar Messages

  • Problem with printing txt file

    I have a problem with printing txt file. My code looks like :
    String filename = something.txt";
    DocFlavor flavor = DocFlavor.INPUT_STREAM.AUTOSENSE;
    PrintService[] services = PrintServiceLookup.lookupPrintServices(
              flavor, null);
    PrintRequestAttributeSet pras = new HashPrintRequestAttributeSet();
    pras.add(PrintQuality.DRAFT);
    pras.add(new Copies(1));
    pras.add(MediaSizeName.ISO_A4);
    pras.add(Sides.ONE_SIDED);
    pras.add(Chromaticity.MONOCHROME);
    PrintService service = ServiceUI.printDialog(null, 200, 200,
              services, services[0],
              null,
              pras);
    if (service != null)
    try
    DocPrintJob job = service.createPrintJob();
    FileInputStream fis = new FileInputStream(filename);
    DocAttributeSet das = new HashDocAttributeSet();
    Doc doc = new SimpleDoc(fis, flavor, das);
    job.print(doc, pras);
    Thread.sleep(10000);
    catch(FileNotFoundException e)
    catch(PrintException e1)
    catch(InterruptedException e2)
    It doesn't work :(
    What is my purpose: I would like to print .txt file but I would like to get PrintDialog where I can choose PrintQuality, Chromaticity etc. I found also that I should use DocFlavor.INPUT_STREAM.TEXT_PLAIN_HOST but I don't know how.
    I will be very gratefull for help :)

    I tested it on 3 printers (different models of hp). 2 of them don't give me any error but when it started print priter stoped (just as it dosesn't have a paper), but 1 of them doesn't react (there were no errors), i thought tahat something was wrong with printers but when I change DocFlavor.INPUT_STREAM.AUTOSENSE to DocFlavor.GIF and filename to dog.gif it works so mybe there is another way to print txt file

  • Problem with custom paper size on dot matrix printer

    Hi All,
    I'm using CR2008 with updated to SP2. I have a problem with custom paper size (W=21; H=14), the CR Viewer show report with custom paper size correctly but when I print it to a dot matrix printer (Epson LQ 300+) the content was rotated to landscape. If print to a laser printer the content was printed correctly. My report was printed correctly by CR10 or previous versions I got this issue when upgraded to CR2008. I aslo tested my computer and printer with orther application like MS Word the printing have no problem with custom paper size.
    Thanks for any advice for me.
    Han

    Looking at the Epson LQ 300+ driver, I see that the latest update is from 2002. In my experience, most matrix printer drivers are not unicode. Crystal Reports is designed to only work with unicode printer drivers. See the [How Printer Driver Options Affect a Report|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/a09051e9-721e-2b10-11b6-f9c65c64ef29&overridelayout=true] article, page 6 for details. Also, see [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
    Finally, see if you can print from the CR designer to this printer and if you get the correct results here.
    Ludek

  • There is a problem with the font size of the itouch 4.

    I was given a new ipod touch gen4th (ios 4.3.5) by the Apple authorized repair centre in Hong Kong three days ago. However. i found that there is a problem with the font size of it. It is different from my original one. Either the playlist or the words in the webpages , the font size is not uniform. Most of the words are boldfaced. Sometimes, there are some words are smaller in size. I don't know whether I can or cannot figure out the problem and tackle it, so, should I take it back to the repair centre? Or does anybody help me to fix it or give me some suggestions? Millions of thank.

    What language is set in Setting>General>International?
    Have you tried the standard fixes:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factoery defaults/new iPod

  • Problem with config sync between two CSM-S modules

    Hi everybody,
    I have a problem with config sync between two CSM-S modules.
    I am using CSM-S software version 2.1(8).
    The acitve module is used in a 6509 with WS-SUP720-BASE supervisor running software version 12.2(18)SXF12a.
    The standby module is used in a 6509-V with VS-S720-10G supervisor (no VSS setup) running software version 12.2(33)SXI3.
    Failover seems to work fine:
    switch-active#sh modu csm 2 ft                                      
    FT group 1, vlan 398
    This box is active
    Configuration is out-of-sync
    priority 150, heartbeat 3, failover 40, preemption is on
    switch-standby# sh modu csm 2 ft
    FT group 1, vlan 398
    This box is in standby state
    Configuration is out-of-sync
    priority 80, heartbeat 3, failover 40, preemption is on
    The command (on active side) "hw-module contentSwitchingModule 2 standby config-sync" leads to following result:
    switch-active:
    2010-04-14T16:21:45+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56042: Apr 14 16:21:44.223: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Bulk sync started
    2010-04-14T16:21:45+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56043: Apr 14 16:21:44.251: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configurations to Standby CSM, this may take several minutes!
    2010-04-14T16:21:46+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56044: Apr 14 16:21:45.995: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configuration to Standby CSM
    2010-04-14T16:21:51+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56045: Apr 14 16:21:50.831: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configuration to Standby CSM
    2010-04-14T16:21:57+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56046: Apr 14 16:21:56.151: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configuration to Standby CSM
    2010-04-14T16:22:59+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56047: Apr 14 16:22:58.791: %CSM_SLB-3-REDUNDANCY: Module 2 FT error: Active: Manual bulk sync timed out
    2010-04-14T16:22:59+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56048: Apr 14 16:22:58.803: %CSM_SLB-3-REDUNDANCY: Module 2 FT error:
    2010-04-14T16:22:59+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56049:  FT CONFIG SYNC: Failed config sync entity send
    switch-standby:
    2010-04-14T16:21:45+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2475: Apr 14 16:21:44.232: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Bulk sync started
    2010-04-14T16:21:45+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2476:
    2010-04-14T16:21:45+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2477: Apr 14 16:21:44.240: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: STANDBY:Configuration is being received, This may take several minutes!
    2010-04-14T16:21:49+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2478: Apr 14 16:21:48.824: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Receiving configuration from Active CSM
    2010-04-14T16:21:54+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2479: Apr 14 16:21:53.964: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Receiving configuration from Active CSM
    2010-04-14T16:21:59+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2480: Apr 14 16:21:58.852: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Started clearing configuration
    2010-04-14T16:21:59+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2481: Apr 14 16:21:59.400: %CSM_SLB-4-REDUNDANCY_WARN: Module 2 FT warning: Standby: Config Sync does not save running-config to startup-config
    2010-04-14T16:22:00+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2482: Apr 14 16:21:59.400: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Previous configuration are being deleted from supervisor
    The last log message on standby device seems to be correct - there is no CSM configuration after the attempted config sync.
    Our configuration includes about 3500 lines and it is really uncomfortable to keep in sync manually.
    Maybe someone has the same problem?
    kind regards,
    Christoph

    Hi Christoph,
    I am running into the exact same issue. Upon further investigation I've discovered that this is a known bug, CSCtd09117.  You can read more about it here: http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtd09117 .   Apparently this is fixed in ver 12.2(32.8.11)SX323 .
    I haven't had a chance to upgrade yet, so I can't verify the fix, but if it works for you please let me know.
    Regards,
    Brandon

  • Problems with Custom Paper Size and Address Book

    I'm having some trouble printing from Address Book onto a custom paper size. I'm attempting to set up a notecard, and only print one at a time, rather than multiple columns as in the Labels option. The trouble is that when creating this small size, Address Book doesn't recognize it as anything other than a regular sheet of US Letter, and thus prints the address in the middle of the page.
    I have no problem printing envelopes, though, which seems odd because they too go in the manual feed for my printer. The notecards are similar width to the envelopes, but only about half the length.
    Has anyone else experienced problems with custom paper sizes printing improperly? I'm using an HP 4515 LaserJet, but have access to a few other laser printers. Thanks for any insight

    I have had the same problem, and with the same result; Adobe Tech Support can't help or fix, after 15 hours on phone, Level 2 support. It is a software bug Adobe has, and can't seem to fix.  I just upgraded to Lightroom CC, and my problem migrated with the upgrade.  I print in Photoshop fine.
    If you found an answer, I would appreciate  knowing how to do it!
    Thanks

  • Is there a problem with maximum RAM size for Satellite 320CDT?

    I have a Satellite 320CDT with the latest BIOS (v8.00) and Windows 98 SE installed; there is 32MB base memory and a 32MB module in the single expansion slot. If I change this for a 64MB expansion module I can still only see 64MB total memory reported, not 96MB as expected; the spec for the machine states that the maximum allowable memory is 160MB (32MB base + 128MB expansion). Does anybody know if there is a problem with the maximum memory size for this model and whether there is a solution or workaround? I need to know quickly, in order to decide if I need to return the memory module to the supplier! Many thanks for any help, Peter

    Are you certain you tried the correct type of memory module? It sounds like you're maybe trying to fit an incompatible type.
    There's a few different suppliers below.
    http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=5634&ft=m&st=3
    http://www.offtek.co.uk/product.php?manuname=Toshiba&maincat=1&subcat=1&mo del=Satellite+320CDT
    http://www.crucial.com/uk/store/listparts.aspx?model=Satellite+320CDT
    http://www.memoryx.net/tosa323bame1.html

  • I am having problems with small text size on AOL mail, and am using the latest version of Firefox.

    I am having problems with text size when using AOL Mail. I am using version 25.0 of Firefox. I did not have this problem in the past, but I suspect a change occurred with one of the Firefox upgrades. I do not have the same problem when using Internet Explorer.

    Could you start by resetting the zoom level on the page? To do that, you can either:
    * Press Ctrl+0 (that's a zero) on the keyboard
    * View menu > Zoom > Reset
    You also can use zoom to increase/decrease the size from there. This article describes the various mouse, keyboard, and menu methods: [[Font size and zoom - increase the size of web pages]].
    Any luck?

  • CS6 Problem with Custom Paper Sizes

    When printing on Epson printers (4800,4880,4900) in the Photoshop print settings dialogue box it won't allow me to print at a custom paper size using the sheet or manual feed settings. The paper feed option defaults to Roll Paper when I create the custom paper size, and then when I change it and try and save the settings it just reverts back to roll paper. If I try and send a print after this then the printer won't accept it because it's being told to print on a roll instead of sheet. Why is this?? I'm using CS6 and OS 10.7 and I've never experienced this problem with any previous Photoshop/ Mac OS X before. Please help!

    I use a pc therefor Windows and PC Photoshop.  Anyway The way this works in Philosophy windows print dialog you have to set both Photoshop print settings and the printer driver settings.  And if Photoshop is to handle colors you must set off the device drivers color management. Photoshop Dialog has a printer setting button. I use that to set the device driver setting like color management off, print quality and custom paper size and source roll paper.
    I also wrote a script to tile image into a document for printing on roll paper and eliminate paper  waste. http://www.mouseprints.net/old/dpr/PasteImageRoll.html

  • Problems with custom paper sizes in Lightroom

    Running Mac OS-X 10.9.3 (Mavericks). using an Epson Stylus Pro 3880, latest driver installed as confirmed by Epson tech support this morning. using Lightroom 5.4.
    I only see this problem in Lightroom -  not in Photoshop - which leads me to conclude that the problem is not an Epson-driver problem.
    The problem is the following:
    In the Print Module, I click on 'page Setup' bottom left. I define my custom paper size under 'Paper Size' -> 'Manage Custom Sizes'. Click OK.
    I then enter 'Print Settings...' bottom left adjacent to the 'Page Setup' button. Select my printer, click on the 'Layout' drop-down list box button and select the 3rd tab in the list: 'Paper Handling'. Here is the problem: the 'Destination Paper Size' option is grayed out and unelectable, and incorrectly shows 'US Letter', which cannot be changed. If I click on 'Scale to fit paper size', and try to make a print to my custom paper that way, it still does not work: it only prints on a fraction of the whole paper.
    I have also tried Apple menu -> System Preferences -> Printers & Scanners to change the default paper size there, but it makes no difference - it still incorrectly shows as 'US Letter' in Lightroom.
    This problem does not occur in Photoshop: In Photoshop, if you go to File -> Print in the menu, and then hit the 'Print Settings' button near the top, my custom paper size is selectable in the 'Paper Size' list box. So it is a problem which is specific to Lightroom.
    Any help appreciated. I have spent most of the day on the phone to Epson and Adobe Tech Support, and no-one has been able to dove the problem
    Thanks,

    I have had the same problem, and with the same result; Adobe Tech Support can't help or fix, after 15 hours on phone, Level 2 support. It is a software bug Adobe has, and can't seem to fix.  I just upgraded to Lightroom CC, and my problem migrated with the upgrade.  I print in Photoshop fine.
    If you found an answer, I would appreciate  knowing how to do it!
    Thanks

  • Problems with robots.txt Disallow

    Hi
    I have a problem with the robots.txt and google.
    I have this robots.txt file:
    User-agent: *
    Disallow: page1.html
    Disallow: dir_1/sub_dir_1/
    Disallow: /data/
    When I enter 'site:www.MySite.com' into Google search box,
    Goolge gets the content from the 'data' directory as well. Google
    should not have indexed the content of data directory.
    So why is google getting the results from 'data' directory,
    whereas I have disallowed it.
    How can I restrict everyone from accessing the data
    directory?
    Thanks

    I found workaround. To have sitemap URL linked pub page, pub page needs to be in the Internet zone. If you need to have sitemap URL linked to the real internet address (e.g. www.company.example.com) you need to put auth page in the default zone, pub
    page in the intranet zone and create AAM http://company.example.com in the internet zone.

  • Problems with config nodemanage SSL setings weblogic10.3

    Hi,
    I am new to build weblogic cluster. But I got some problems when I build it.
    I tried to build a simple architecture as a demo to understand the cluster.
    I have two PCs with XP
    PC1 and PC2
    I defined machine0 to PC1 and machine1 to PC2 in the weblogic.
    pc1 IP:192.168.1.102
    pc2 IP:192.168.1.103
    I created a domain on the PC1 testDomain
    I created a admin server and one node on the PC1(machine0):testAdmin, testNode1
    I created another node on the PC2(machine1):testNode2
    Cluter: testCluster, testNode1, testNode2 added
    Cluster Address:192.168.1.102
    I launch the nodeManager menully.
    I wanted to start testNode1 in the admin console(web page)
    It's seems working, I can see the status changed to "RUNNING". But I got the message in the console
    Invalid/unknown SSL header was received from peer localhost - 127.0.0.1 during SSL handshake
    It seems there is something wrong with the SSL handshanke, this message will appeared when I enter the
    testDomain->Environment->Server page in the admin console.
    I launched the nodeManager with the SecureListener=false
    and the setting in the testAdmin, testNode1, testNode2 is SSL Listen Port Enabled UNCHECKED
    keystores setting is "Dome identity and Demo Trust"
    In the machine0 the node manger tab Type is Plain.
    My question is:
    1. I didn't setting the SSL why the server will use SSL to communitate each othe.
    2. If I want to use Nodemanager to control the node server, is the SSL must be setting?
    3. What cause the message I got, is between nodemanager and testAdmin or testAdmin and testNode1? Is there any way to solve it?
    4. I found weblogic tool utils.CertGen can generate SSL certificates, how to use it to recreate the DemoIdentity.jks and DemoTrust.jks, is it possible?
    My operations are all focus on the PC1 I believe the SSL setting is the cause, please give me some advise.
    Thanks

    Make sure you restart the nodemanger service or script when you make changes to the nodemananger.properties file. They don't usually pick up on the fly. Previous post was correct in that the errors are probably within the cert. Turn off SSL and test and it will confirm. If still getting issues turn off the hostname verifier on the admin server (on keystore page or SSL under the admin server config).

  • Problems with Config Tool; ADS not running

    Hello everyone,
    I'm trying to create an Interactive Form, but I get the following error
    com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
    com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (404) Not Found.
    I assume that Adobe Document Services is not running. I typed http://localhost:50000/AdobeDocumentServices/config in my browser. The result was an Error 404, too.
    In a documentation sheet about administration of ADS, I found that service IIOP in the config tool should be set to startup mode "always".
    When I tried to apply the changes in the config tool, it terminated with a critical error. Logfile says the following:
    Error occurred while working with Configuration.
    com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred during DB access: ,
         at com.sap.engine.core.configuration.impl.persistence.rdbms.UpdateProcessor.flush(UpdateProcessor.java:294)
         at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.commitConfigurationHandler(ConfigurationCache.java:1217)
         at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.commit(ConfigurationHandlerImpl.java:833)
         at com.sap.engine.configtool.batch.task.TaskUtil.changeProperties(TaskUtil.java:335)
         at com.sap.engine.configtool.batch.task.ChangeServicePropsTask.go(ChangeServicePropsTask.java:64)
         at com.sap.engine.configtool.batch.task.TasksThread.run(TasksThread.java:46)
    Caused by: com.sap.dbtech.jdbc.exceptions.BatchUpdateExceptionSapDB: [-3018]: Invalid numeric parameter(input position 2)
         at com.sap.dbtech.jdbc.CallableStatementSapDB.executeBatch(CallableStatementSapDB.java:649)
         at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeBatch(DirectPreparedStatement.java:1102)
         at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeBatch(DirectPreparedStatement.java:1066)
         at com.sap.engine.core.configuration.impl.persistence.rdbms.DBAccessDefault.execInsertEntryBatch(DBAccessDefault.java:1170)
         at com.sap.engine.core.configuration.impl.persistence.rdbms.UpdateProcessor.flush(UpdateProcessor.java:257)
         ... 5 more
    What can I do about the two problems?

    Just for the sake of learning how to use the tool i start with drawing a rectangle then click and drag the gradient tool across the box. i see the gradient line appear but when i release the mouse the gradient line disappears
    i end up witha box with a gradient but all my editing has to be done in the gradient box as shown in this screen shot:
    What I'm wanting to achieve is how the lades hat is edited in this video Working with gradients | Visual Design CS4 | Adobe TV

  • Problem with decreased font size in exported PDF.

    We have a web site running on a Windows 2008R2 server.
    The site was developed with Visual Studio 2010 using  .NET 4.0.and is running in 32bit. The associated application pool uses a specific local user.
    We have some reports that include a barcode font. The font is installed on the server and the reports are rendered in PDF on the server side to avoid the need to have the barcode font installed on all clients. The PDF renders correctly but we are facing the decreased font size problem
    We followed the instructions included in this post:
    Unfortunately the part regarding VS 2010 does not seem to work.
    If we add the specified Key on the HKLM section of the registry, it doesnu2019t have any effect.
    If we add it on the HKCU section while logged in with the same user assigned to the application pool, everything seems to work fine. But as soon as the user is logged out, the reports stop working.
    Have anybody figured out how to configure correctly those keys with this configuration?

    Try putting it under the HKU/.default path.  You can also use process monitor to see where the application is looking.

  • SQL Developer:Problem with multi byte size after import using excel format

    Hi,
    Need your help. I am trying to export multibyte characters from our China instance(r11i instance) using SQL Developer's export data via Excel format into an R12 Vision instance. I have a staging table with exactly the same structure in both instances. Prior to export to excel, I check the byte size of the sample data below using LENGTH and LENGTHB sql functions and these are the results:
    Sample data = 材料LI（USD）
    LENGTH=9
    LENGTHB=13
    Then, I exported the table as excel file. Afterwards, I used SQL Developer to import the excel file into the table of the target instance. I check the bytesize again and here are the results:
    Sample data = 材料LI（USD）
    LENGTH=9
    LENGTHB=17
    The byte size increased from 13 to 17. I did not change anything on the excel file. Just straight forward export to excel file then imported it to the target instance. How come there is an increase in byte size? Has anyone encountered this in SQL Developer? We really need to export the files as excel.
    Source:
    Database version = 9.2.0.5.0
    Target:
    Database version = 11.1.0.7.0
    Regards,
    Wendell
    Edited by: user13038177 on May 13, 2010 9:05 PM
    Edited by: user13038177 on May 13, 2010 9:06 PM

    Wendell,
    This forum is for handling issues migrating from non-Oracle databases to Oracle databases.
    As this is an Oracle to Oracle issue using SQL*Developer export it would be better to open a new thread in the SQL*Developer forum -
    SQL Developer
    There will be more people there who can help with this problem.
    Regards,
    Mike
    Edited by: mkirtley on May 14, 2010 10:16 AM

Maybe you are looking for