Problem with default printers
Post Author: Nataly
CA Forum: Crystal Reports
I had SQL Server 2000 and Crystal Reports 8.0 installed on Windows 2000. ASP intranet application was working fine and users had their crystal reports on their default printers. After upgrading Windows 2000 to Windows 2003 Crystal doesn't recognize users default printers any more and choose one particular printer on network no matter what users default printer is. They can choose the necessary one still, but it realy bothers them because they get use to have it in a right way.Please, help!
What information should I provide?
AMD Phenom II X4
GeForce GTX 550ti 1GB GDDR5
8 GB DDR3
Windows 7 Ultimate 64 Bit
Similar Messages
-
Problems with deployed printers
We have printers deployed to our buildings via Group Policy. We're having intermittent problems with the printers getting mapped for the users. We have a mixed Windows 7 and 8.1 environment. From what I can tell the Windows 7 almost always work. However
for the Windows 8.1 ones its intermittent. The error in the Application log for the machines that do not get the printers is this:
The user 'Hard-IMC-1nb-test' preference item in the 'Student Mandatory {0FA26CC5-C001-4A02-AACE-930581B7A1CF}' Group Policy Object did not apply because it failed with error code '0x80070057 The parameter is
incorrect.' This error was suppressed.
Hard-IMC etc is the printer share name. Student Mandatory is the name of the policy.
The strange thing is some students login and get all printers, some it gets this. I tried adding another printer share to the same printers with say a PCL5 driver vs a PCL 6. And it'll work fine for a few days then that one falls into the mix of not getting
mapped. This is happening in all of our buildings each has its own local 2008 R2 print server. If I create a test account and login to the same PC as a student that doesn't get the printers it works fine for about 9-10 logins and then it starts happening to
the test account. Its like the problem takes a few logins to occur. I've looked at some of our printers and they use the same manufacturer driver for both Win 7 and 8.1 so its not a driver issue especially since a lot of the times they do map.
The only thing I've been able to find out is that on Win7 its not happening. Nothing else makes sense. There is no pattern to time of day or account. The machines all have the same image and updates etc. Can anyone give me a direction to look at. We have
too many PC's to do printers individually.
Thanks
JasonHi Jason,
Before going further, sorry for the late response.
>>If I create a test account and login to the same PC as a student that doesn't get the printers it works fine for about 9-10 logins and then it starts happening to the test account. Its like the problem takes a few logins to occur
Based on the description, after the issue occurs, please log out the users, log in again, and then run the command
gpresult/h gpreport.html to collect group policy result to check if the group policy settings still apply correctly.
Besides, what printers do we use? For this involves third party hardware product, and in order to better troubleshoot the issue, we can also contact vendor company to see if they have some suggestions for this issue.
Best regards,
Frank Shen -
Table editor problem with default value for column
Hi there,
I'm trying to use SQL Developer 1.2.1 on Ubuntu 7.10 (though I don't think the OS is relevant) and I'm running into a snag when trying to update table structures. If you go to edit the table to say modify a column name, and that column has a default value set, SQL Developer is encapsulating the value with brackets and quotes. When trying to save the changes, it complains about the default value being 4 chars too many for the column width. An example of this would be a currency code column of varchar2 (3) set with EUR as the default. SQL Developer changes the value to ('EUR') hence the error.
Is there anyway to prevent this from happening?
Cheers,
ChrisCould you please be more specific? In 1.2.1.32.40 I
added the column COL1 VARCHAR2(3) with default value
'EUR'. The data display field refreshed to show the
default value, so I edited it in a couple of entries
and comitted the change without problem. Then I
renamed the column from the "Edit table" popup menu.
Finally, I renamed the column from the "Rename
column" popup menu, no problem either.Ah, you are correct. That does work. What I was trying is select tablename in the object browser, then right click on it and select "Edit" from the contextual menu. You are then presented with edit table dialog box. If you then select a column in that box you will see a column properties box. In that section you can change the name, default value, datatype et cetera. Note that your default column value which should just be EUR (or 'EUR' to denote that it's a string) is now ('EUR'). Once you try changing the name to of the column to something else and then click OK, you should then get an error complaining of "Invalid varchar2 default value" with a more specific message of "Default values size 7 is greater than the allowed 3"
You have provided a work around, and thanks for that, but it would be nice to edit everything in the Edit table dialog box if you're modifying more than one column name. I'm tasked with cleaning up a bit of a messy database, and there are a good deal of columns to be renamed.
Cheers,
Chris -
Problem with default file access permission
Hi,
I am accessing a common area '/NFS_DATA' by both my java and oracle codes by the users 'javaUsr' and 'oraUsr' respectively.
As per the requirement, the oracle code (oraUsr) needs to create some file in the specified location and then the java code (javaUsr) needs to update those files (created by oraUsr) with some new data.
At present scenario the 'oraUsr' creates files with default access permission 644, which does not permit 'javaUsr' to update them.
Constraints : I am not supposed to set umask at the .profile of 'oraUsr'.
Execution of any shell script from oracle procedure is not permitted.
Is it possible to specify file-system specific default file access permissions??
Any idea to overcome this issue??Hi,
I am accessing a common area '/NFS_DATA' by both my
java and oracle codes by the users 'javaUsr'
and 'oraUsr' respectively.
As per the requirement, the oracle code
(oraUsr) needs to create some file in the
specified location and then the java code
(javaUsr) needs to update those files (created
by oraUsr) with some new data.
At present scenario the 'oraUsr' creates files
with default access permission 644, which does
not permit 'javaUsr' to update them.
Constraints : I am not supposed to set
umask at the .profile of 'oraUsr'.
Execution of any shell script from oracle
oracle procedure is not permitted.
Is it possible to specify file-system specific
default file access permissions??
Any idea to overcome this issue??You might like to try using File ACLs
man setfacl(1)
as oraUsr
setfacl -s user:oraUsr:rw-,user:javaUsr:rwx,group::r--,other:---,mask:rwx file
This way the oraUsr can not execute file
but javausr can
getfacl will show the ACL
user::rw-
user:javaUsr:rwx #effective:rwx
group::rw- #effective:rw-
mask:rwx
other:---
hope this helps a bit -
Problems with Default Encoding in Mail
I have been trying to change my default encoding settings in Apple Mail to Unicode-8. It has become necessary because some of the outlook clients that my colleagues use see my messages with control-characters/question marks. I know that this problem has been visited before and from the past posts I understand that closing the Mail and typing the following in the Terminal will do the trick:
defaults write com.apple.mail NSPreferredMailCharset "UTF-8"
I tried that several times and for some reason when I try to compose a new message, the encoding is set to "Automatic".
I would appreciate ANY help in this regard. I have been trying to get more information on this but my search has not yet been fruitful.
Thank you very much.
MacBook Pro Mac OS X (10.4.7)I do have the same problem as Steathford do, I tried
to add a dingbat without success (scissor), I still
have same "chinese signs everywhere",
I've never seen a case where the dingbat did not work. Could you send me an example? You need to go to your Sent folder, choose a message where you did this, and do Message > Send Again, and replace the original addressee with my email (tom at bluesky dot org).
When adding a dingbat, you must use the Character Palette as shown here, and not just change your font.
http://homepage.mac.com/thgewecke/dingbat.jpg -
Problem with defaulted date but only in workbook
Hi all,
I have a weird date problem here. One of my queries has a "key date" which I default to the current date in the variable user exit. When I run the query, it works fine. However, when we run the workbook, things go wrong. With my date settings (DD.MM.YYYY), there is no issue, but the end users all have the American date setting (MM/DD/YYYY). Whenever one of them runs the workbook, we get an error before the variable screen is shown. The error message is as follows:
Please enter value in permitted format for variable Key Due Date.
Value "" for variable "" is invalid.
Program error in class SAPMSSY1 method: UNCAUGHT_EXCEPTION
System error in program CL_RSR_XLS_WORKBOOK and form SERIALIZE: 01 (see long text)
As soon as I change the end user's date settings, the workbook runs fine.
Any clue?
RafBseems to be linked to user specific date settings... pretty weird as SAP should automatically convert according to the user settings
-
Multiple ALV Grid Controls per report - problem with default displ.variant
Hi,
I have a report with few screens called sequentialy. Each one of the screens has implemented own instance of ALV Grid Control within custom container, means:
- screen 100 has container Cont100 and grid control "grid100",
- screen 110 has container Cont110 and grid control "grid110"
- screen 120 has container Cont120 and grid control "grid120"
and so on...
Each one of the grid controls is initialized with own field catalog table, with own layout and variant structure definitions. My problem occurs when the user changes the display variant for some of the grid controls and save the layout variant using "default setting" checkbox. In this case next time the program is started all other grid controls behaves like they don't have their own variant definitions, but uses the default setting of the mentioned screen. This leads (usualy) to unsuable grid controls by default, because usualy different controls have no equal field-definition tables. I have the same behaviour even when there are more than 1 ALV grids on a single screen (for example - 2).
For now I don't provide variant variables at selection screen, but it seems there is no way to provide such variables for each one of the grid-controls.
Is anyone aware how to control this? Means no matter if there is default setting in use for some of the grid-controls, how to manipulate other grid-controls not to use this default setting?
Many thanks in advance.
Regards,
Ivaylo Mutafchievcheck this sample code which displays 4 grids in 4 different tabs and with 4 different handles
PROGRAM sapmzsdpp MESSAGE-ID z1.
Table Declarations *
TABLES:
vbpa, " Sales Document: Partner
kna1, " Customer Master
vbap. " Sales Document: Item Data
Tab Strip Declarations *
CONTROLS:
tabstrip_sdpp TYPE TABSTRIP. " Tabstrip
Constants declarations *
CONSTANTS:
c_rep_zm(2) TYPE c VALUE 'ZM', " Outside Sales Representative
c_rep_ve(2) TYPE c VALUE 'VE', " Inside Sales Representative
c_rep_zi(2) TYPE c VALUE 'ZI', " Sales Manager
c_abgru_08(2) TYPE c VALUE '08', " Reason for Rej: SO Not Closed
c_stock_ind_e TYPE c VALUE 'E', " Stock Idctr : Orders on hand
c_gauge(5) TYPE c VALUE 'GAUGE', " Characteristic Name - GAUGE
c_width(5) TYPE c VALUE 'WIDTH', " Characteristic Name - WIDTH
c_gauge_metric(12) " Character Name - GAUGE_METRIC
TYPE c VALUE 'GAUGE_METRIC',
c_width_metric(12) " Character Name - WIDTH_METRIC
TYPE c VALUE 'WIDTH_METRIC',
c_eng_metric(14) " Charac Value - ENGLISH_METRIC
TYPE c VALUE 'ENGLISH_METRIC',
c_coil(4) TYPE c VALUE 'COIL', " For Value COIL
c_spec_bf(7) TYPE c VALUE 'SPEC_BF'," Charac value SPEC_BF
c_wadat_ist(8) " Actual Goods Movement Date
TYPE c VALUE '00000000',
c_mcha(4) TYPE c VALUE 'MCHA', " Database Table 'MCHA'
c_classtype_022(3)
TYPE c VALUE '022', " Class Type : BATCH
c_pipe(2) TYPE c VALUE '06', " Material Pricing Group: Pipes
c_item_ctgry_ztam(4)
TYPE c VALUE 'ZTAM', " Item Cat:Certificate Mnfctr
c_lab_result(10) " Charac Value LAB_RESULT
TYPE n VALUE '0000001392',
c_none_reqd(10) " For Value NONE REQD
TYPE c VALUE 'NONE REQD.',
c_passed(6) TYPE c VALUE 'PASSED', " For Value PASSED
c_pending(12) TYPE c " For Value TEST PENDING
VALUE 'TEST PENDING',
c_bundling(13) " For Value TEST BUNDLING
TYPE c VALUE 'TEST BUNDLING',
c_normal(2) TYPE c VALUE '01'. " Priority: Normal
Internal Table Declarations *
DATA :
Internal table to hold common data for all reports
BEGIN OF t_common_data OCCURS 0,
kunnr LIKE vbak-kunnr, " Customer Number
vbeln LIKE vbap-vbeln, " Sales Document Number
posnr LIKE vbap-posnr, " Sales Document Item Number
ihrez_e LIKE vbkd-ihrez_e, " Mill Order Number
matnr LIKE vbap-matnr, " Material Number
pstyv LIKE vbap-pstyv, " Sales Document Item Category
kwmeng LIKE vbap-kwmeng, " Cumulative Order Quantity
lprio LIKE vbap-lprio, " Delivery Priority
werks LIKE vbap-werks, " Plant
kondm LIKE vbap-kondm, " Material Pricing Group
aedat LIKE vbap-aedat, " Date of Last Change
cuobj LIKE vbap-cuobj, " Configuration
saldata LIKE vbap-zzcust_req_avail,
" Required Availability Date
END OF t_common_data,
Internal table to hold Customer Number
BEGIN OF t_cust_temp OCCURS 0,
kunnr LIKE vbak-kunnr, " Customer Number
END OF t_cust_temp,
Internal table to hold stock details
BEGIN OF t_stock OCCURS 0,
vbeln LIKE mska-vbeln, " Sales Document Number
posnr LIKE mska-posnr, " Sales Document Item Number
matnr LIKE mska-matnr, " Material Number
werks LIKE mska-werks, " Plant
charg LIKE mska-charg, " Batch Number
kalab LIKE mska-kalab, " Valuated Stock
ersda LIKE mska-ersda,
END OF t_stock,
Internal table to hold deliveries
BEGIN OF t_delivery_data OCCURS 0,
vbeln LIKE lips-vbeln, " Delivery Document Number
vgbel LIKE lips-vgbel, " Document No of Ref Document
vgpos LIKE lips-vgpos, " Item No of Ref Item
END OF t_delivery_data,
Internal table to hold released tons & released days
BEGIN OF t_released_tons_days OCCURS 0,
vbeln LIKE likp-vbeln, " Delivery Document Number
btgew LIKE likp-btgew, " Total Weight
bldat LIKE likp-bldat, " Document Date in Document
END OF t_released_tons_days,
Internal table to hold Pre-Production-Pending Orders (Report-1)
BEGIN OF t_pre_prod_ord OCCURS 0,
sortl1 LIKE zcustcode-sortl, " Customer Search Term
ihrez_e1 LIKE vbkd-ihrez_e, " Mill Order Number
salord1(17) TYPE c, " Sales Order Document & Item
descri TYPE char70, " Specification of the Item
speci TYPE char30, " Description of the Item
days_entry LIKE zlgcyinfo-days_since_entry,
" Days Since Entry
dept LIKE zlgcyinfo-bklog, " Department
notes1 LIKE zcsimemo-text, " CSI File Memo Text
*/ Request No. DV2K904687
chng_date LIKE vbap-aedat, " Date of Last Change
END OF t_pre_prod_ord,
Internal table to hold Delinquent Orders (Report-2)
BEGIN OF t_delinquent_ord OCCURS 0,
sortl2 LIKE zcustcode-sortl, " Customer Search Term
ihrez_e2 LIKE vbkd-ihrez_e, " Mill Order Number
salord2(17) TYPE c, " Sales Order Document & Item
descri TYPE char70, " Specification of the Item
speci TYPE char30, " Description of the Item
saldata LIKE vbap-zzcust_req_avail,
schdate LIKE vbep-edatu, " Schedule Line Date
days_late LIKE zlgcyinfo-dayslate,
" Days Late
unit LIKE zlgcyinfo-unit, " Status of Consolidation Units
days_at_unit LIKE zlgcyinfo-daysatunit,
notes2 LIKE zcsimemo-text, " CSI File Memo Text
END OF t_delinquent_ord,
Internal table to hold Processed Material Orders (Report-3)
BEGIN OF t_processed_ord OCCURS 0,
sortl3 LIKE zcustcode-sortl, " Customer Search Term
ihrez_e3 LIKE vbkd-ihrez_e, " Mill Order Number
salord3(17) TYPE c, " Sales Order Document & Item
descri TYPE char70, " Specification of the Item
speci TYPE char30, " Description of the Item
order_tons LIKE vbap-kwmeng, " Cumulative Order Quantity
fin_tons LIKE mska-kalab, " Val.Stock With Unres Usage
fin_days TYPE i, " Finished Days
rel_tons LIKE likp-btgew, " Total Weight
rel_days TYPE i, " No.of.Days Order is Released
status(15) TYPE c, " Status Of Stock
tb_tons LIKE zlgcyinfo-tons, " Tons
notes3 LIKE zcsimemo-text, " CSI File Memo Text
END OF t_processed_ord,
Internal table to hold Flagged Orders (Report-4)
BEGIN OF t_flagged_ord OCCURS 0,
sortl4 LIKE zcustcode-sortl, " Customer Search Term
ihrez_e4 LIKE vbkd-ihrez_e, " Mill Order Number
salord4(17) TYPE c, " Sales Order Document & Item
descri TYPE char70, " Specification of the Item
speci TYPE char30, " Description of the Item
saldata LIKE vbap-zzcust_req_avail,
unit LIKE zlgcyinfo-unit, " Status of Consolidation Units
tons LIKE zlgcyinfo-tons, " Tons
priority LIKE vbap-lprio, " Delivery Priority
notes4 LIKE zcsimemo-text, " CSI File Memo Text
END OF t_flagged_ord,
Internal table to hold CSI memo file data
BEGIN OF t_csi_memo_data OCCURS 0,
vbeln LIKE zcsimemo-vbeln, " Sales Document Number
posnr LIKE zcsimemo-posnr, " Sales Order line item
text LIKE zcsimemo-text, " CSI File Memo Text
END OF t_csi_memo_data,
Internal table to hold Customer Codes
BEGIN OF t_customer_code OCCURS 0,
sortl LIKE zcustcode-sortl, " Sort Field
kunnr LIKE zcustcode-kunnr, " Customer Number
END OF t_customer_code,
Internal table to hold schedule line dates
BEGIN OF t_schedule_line_date OCCURS 0,
vbeln LIKE vbep-vbeln, " Sales Document Number
posnr LIKE vbep-posnr, " Sales Document Item Number
edatu LIKE vbep-edatu, " Schedule line date
END OF t_schedule_line_date,
Internal table to hold Characteristic values
t_configuration
TYPE TABLE OF conf_out
WITH HEADER LINE,
Internal tables to hold legacy data
t_lgcyinfo TYPE TABLE OF zlgcyinfo
WITH HEADER LINE.
Work variables declarations *
DATA:
gv_parvw LIKE kupav-parvw, " Partner function
gv_abgru LIKE vbap-abgru, " Reason to eject sales order
gv_gauge LIKE conf_out-atwtb, " Charac Value Description
gv_width LIKE conf_out-atwtb, " Charac Value Description
gv_ok_code LIKE sy-ucomm, " Usercommand
gv_okcode LIKE sy-ucomm, " User Command
gv_number LIKE sy-dynnr
VALUE '0101', " Initial Sub Screen Number
gv_vbeln LIKE vbak-vbeln, " Sales Order
gv_posnr LIKE vbup-posnr, " Sales Item
*/ Request No. DV2K904687
gv_del_prio LIKE vbap-lprio, " Delivery Priority
gv_obj_key LIKE inob-objek, " Object Key
gv_config LIKE inob-cuobj, " Configuration
gv_lab_result LIKE ausp-atwrt, " Lab Result Value
gv_pass_stock LIKE mska-kalab, " Finished Stock
gv_fail_stock LIKE mska-kalab, " Failed Stock
gv_tp_tons LIKE mska-kalab, " Test Pending Tons
gv_csi_stock LIKE mbew-lbkum, " CSI Stock On Hand
gv_val_stock LIKE mska-kalab, " Valuated Stock
gv_fin_tons LIKE mska-kalab, " Finished Tons
gv_fin_days TYPE i, " Finished Days
gv_rel_tons LIKE likp-btgew, " Released Tons
gv_rel_days TYPE i, " Released Days
gv_no_delivery " Number of Delivery Documents
TYPE i,
gv_bund_tons LIKE zlgcyinfo-tons, " Bundling Tons
gv_net_weight LIKE mara-ntgew, " Net Weight
gv_tb_tons LIKE zlgcyinfo-tons, " Test/Bundling Tons
gv_date LIKE mska-ersda, " Date
gv_tabix LIKE sy-tabix, " Table Index
gv_flg TYPE c, " Flag Variable
gv_exit TYPE c. " For Parameter Exit
Constant declarations for ALV Grid *
CONSTANTS:
c_cont_pre_prod_ord
TYPE scrfname VALUE 'CUST_PPP',
" Custom Container for Report-1
c_cont_delinquent_ord
TYPE scrfname VALUE 'CUST_DIP',
" Custom Container for Report-2
c_cont_processed_ord
TYPE scrfname VALUE 'CUST_PMS',
" Custom Container for Report-3
c_cont_flagged_ord
TYPE scrfname VALUE 'CUST_FLGORD',
" Custom Container for Report-4
c_handle1(3) TYPE c VALUE 'G_1', " Handle for PPP rpt Grid
c_handle2(3) TYPE c VALUE 'G_2', " Handle for DIP rpt Grid
c_handle3(3) TYPE c VALUE 'G_3', " Handle for PMS rpt Grid
c_handle4(3) TYPE c VALUE 'G_4', " Handle for FLGORD rpt Grid
c_true TYPE c VALUE 'X', " For value 'X'
c_save TYPE c VALUE 'A'. " User-Defd & Global Variants
Selection Screen *
SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-014.
PARAMETERS :
p_osr RADIOBUTTON GROUP g1
DEFAULT 'X', " Outside Sales Representative
p_isr RADIOBUTTON GROUP g1, " Inside Sales Representative
p_s_mgr RADIOBUTTON GROUP g1. " Sales Manager
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-005.
SELECT-OPTIONS:
s_pernr FOR vbpa-pernr
OBLIGATORY, " Employee Number
s_kunnr FOR kna1-kunnr, " Customer Number
s_sortl FOR kna1-sortl, " Customer Search Term
s_kondm FOR vbap-kondm. " Material Pricing Group
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-006.
PARAMETERS:
p_open RADIOBUTTON GROUP g2
DEFAULT 'X', " Open Orders
p_closed RADIOBUTTON GROUP g2. " Closed Orders
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN BEGIN OF BLOCK b4 WITH FRAME TITLE text-007.
PARAMETERS:
p_var1 LIKE disvariant-variant, " Variant For Report-1
p_var2 LIKE disvariant-variant, " Variant For Report-2
p_var3 LIKE disvariant-variant, " Variant For Report-3
p_var4 LIKE disvariant-variant. " Varinat For Report-3
SELECTION-SCREEN END OF BLOCK b4.
SELECTION-SCREEN END OF SCREEN 500.
*/ Begin of Modification - Request No. DV2K904687
Selection Screen for Changing Sales Order Priority
SELECTION-SCREEN BEGIN OF SCREEN 1100 AS WINDOW.
SELECTION-SCREEN BEGIN OF BLOCK b5 WITH FRAME TITLE text-044.
PARAMETERS p_sonum LIKE vbap-vbeln." Sales Order Number
SELECT-OPTIONS s_item FOR vbap-posnr." Sales Order Item
PARAMETERS p_delpr LIKE vbap-lprio." Delivery Priority
SELECTION-SCREEN END OF BLOCK b5.
SELECTION-SCREEN END OF SCREEN 1100.
*/ End of Modification - Request No. DV2K904687
CLASS lcl_gv_event_receiveriver DEFINITION *
CLASS lcl_event_receiver DEFINITION DEFERRED.
ALV Grid - Work Variables Declarations *
DATA:
gv_cont_pre_prod_ord TYPE REF
TO cl_gui_custom_container,
" Custom Cont For Report-1
gv_cont_delinquent_ord TYPE REF
TO cl_gui_custom_container,
" Custom Cont For Report-2
gv_cont_processed_ord TYPE REF
TO cl_gui_custom_container,
" Custom Cont For Report-3
gv_cont_flagged_ord TYPE REF
TO cl_gui_custom_container,
" Custom Cont For Report-4
gv_grid_pre_prod_ord TYPE REF
TO cl_gui_alv_grid,
" Grid For Report-1
gv_grid_delinquent_ord TYPE REF
TO cl_gui_alv_grid,
" Grid For Report-2
gv_grid_processed_ord TYPE REF
TO cl_gui_alv_grid,
" Grid For Report-3
gv_grid_flagged_ord TYPE REF
TO cl_gui_alv_grid,
" Grid For Report-4
gv_event_receiver TYPE REF
TO lcl_event_receiver,
" Object For Local Class
gs_lay_pre_prod_ord TYPE lvc_s_layo,
" Work Area for Grid layout
gs_lay_delinquent_ord TYPE lvc_s_layo,
" Work Area for Grid layout
gs_lay_processed_ord TYPE lvc_s_layo,
" Work Area for Grid layout
gs_lay_flagged_ord TYPE lvc_s_layo,
" Work Area for Grid Layout
gs_var_pre_prod_ord TYPE disvariant,
" Layout Structure
gs_var_delinquent_ord TYPE disvariant,
" Layout Structure
gs_var_processed_ord TYPE disvariant,
" Layout Structure
gs_var_flagged_ord TYPE disvariant,
" Layout Structure
t_fcat_pre_prod_ord TYPE lvc_t_fcat
WITH HEADER LINE,
" Field Catalog For Report-1
t_fcat_delinquent_ord TYPE lvc_t_fcat
WITH HEADER LINE,
" Field Catalog For Report-2
t_fcat_processed_ord TYPE lvc_t_fcat
WITH HEADER LINE,
" Field Catalog For Report-3
t_fcat_flagged_ord TYPE lvc_t_fcat
WITH HEADER LINE,
" Field Catalog For Report-4
t_exclude TYPE ui_functions,
" Function Code Table
gs_exclude TYPE ui_func. " Function Code Structure
CLASS lcl_gv_event_receiver DEFINITION *
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
handle_hotspot
FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING e_row_id e_column_id es_row_no,
handle_top_of_page
FOR EVENT print_top_of_page OF cl_gui_alv_grid,
*/ Begin of Modification - Request No. DV2K904687
handle_toolbar
FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING e_object e_interactive,
handle_user_command
FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING e_ucomm.
*/ End of Modification - Request No. DV2K904687
ENDCLASS. " LCL_EVENT_RECEIVER DEFINITION
CLASS IMPLEMENTATION *
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_hotspot.
CASE e_column_id-fieldname.
WHEN 'SALORD1'.
CLEAR t_pre_prod_ord.
READ TABLE t_pre_prod_ord
INTO t_pre_prod_ord
INDEX e_row_id-index.
Call VA03 To View Sales Order Line Item Details
PERFORM call_va03 USING t_pre_prod_ord-salord1.
WHEN 'SALORD2'.
CLEAR t_delinquent_ord.
READ TABLE t_delinquent_ord
INTO t_delinquent_ord
INDEX e_row_id-index.
Call VA03 To View Sales Order Line Item Details
PERFORM call_va03 USING t_delinquent_ord-salord2.
WHEN 'SALORD3'.
CLEAR t_processed_ord.
READ TABLE t_processed_ord
INTO t_processed_ord
INDEX e_row_id-index.
Call VA03 To View Sales Order Line Item Details
PERFORM call_va03 USING t_processed_ord-salord3.
WHEN 'SALORD4'.
CLEAR t_flagged_ord.
READ TABLE t_flagged_ord
INTO t_flagged_ord
INDEX e_row_id-index.
Call VA03 To View Sales Order Line Item Details
PERFORM call_va03 USING t_flagged_ord-salord4.
WHEN 'SORTL1'.
CLEAR t_pre_prod_ord.
READ TABLE t_pre_prod_ord
INTO t_pre_prod_ord
INDEX e_row_id-index.
Call ZSD11 for Customer Search Term
PERFORM call_zsd11_cust_code USING t_pre_prod_ord-sortl1.
WHEN 'SORTL2'.
CLEAR t_delinquent_ord.
READ TABLE t_delinquent_ord
INTO t_delinquent_ord
INDEX e_row_id-index.
Call ZSD11 for Customer Search Term
PERFORM call_zsd11_cust_code USING t_delinquent_ord-sortl2.
WHEN 'SORTL3'.
CLEAR t_processed_ord.
READ TABLE t_processed_ord
INTO t_processed_ord
INDEX e_row_id-index.
Call ZSD11 for Customer Search Term
PERFORM call_zsd11_cust_code USING t_processed_ord-sortl3.
WHEN 'SORTL4'.
CLEAR t_flagged_ord.
READ TABLE t_flagged_ord
INTO t_flagged_ord
INDEX e_row_id-index.
Call ZSD11 for Customer Search Term
PERFORM call_zsd11_cust_code USING t_flagged_ord-sortl4.
WHEN 'IHREZ_E1'.
CLEAR t_pre_prod_ord.
READ TABLE t_pre_prod_ord
INTO t_pre_prod_ord
INDEX e_row_id-index.
Call ZSD11 for Mill Order
PERFORM call_zsd11_millorder USING t_pre_prod_ord-ihrez_e1.
WHEN 'IHREZ_E2'.
CLEAR t_delinquent_ord.
READ TABLE t_delinquent_ord
INTO t_delinquent_ord
INDEX e_row_id-index.
Call ZSD11 for Mill Order
PERFORM call_zsd11_millorder USING t_delinquent_ord-ihrez_e2.
WHEN 'IHREZ_E3'.
CLEAR t_processed_ord.
READ TABLE t_processed_ord
INTO t_processed_ord
INDEX e_row_id-index.
Call ZSD11 for Mill Order
PERFORM call_zsd11_millorder USING t_processed_ord-ihrez_e3.
WHEN 'IHREZ_E4'.
CLEAR t_flagged_ord.
READ TABLE t_flagged_ord
INTO t_flagged_ord
INDEX e_row_id-index.
Call ZSD11 for Mill Order
PERFORM call_zsd11_millorder USING t_flagged_ord-ihrez_e4.
WHEN 'NOTES1'.
CLEAR t_pre_prod_ord.
READ TABLE t_pre_prod_ord
INTO t_pre_prod_ord
INDEX e_row_id-index.
Call zsd00087 program to edit CSI Memo Text
PERFORM edit_notes USING t_pre_prod_ord-salord1.
WHEN 'NOTES2'.
CLEAR t_delinquent_ord.
READ TABLE t_delinquent_ord
INTO t_delinquent_ord
INDEX e_row_id-index.
Call zsd00087 program to edit CSI Memo Text
PERFORM edit_notes USING t_delinquent_ord-salord2.
WHEN 'NOTES3'.
CLEAR t_processed_ord.
READ TABLE t_processed_ord
INTO t_processed_ord
INDEX e_row_id-index.
Call zsd00087 program to CSI Memo Text
PERFORM edit_notes USING t_processed_ord-salord3.
WHEN 'NOTES4'.
CLEAR t_flagged_ord.
READ TABLE t_flagged_ord
INTO t_flagged_ord
INDEX e_row_id-index.
Call zsd00087 program to CSI Memo Text
PERFORM edit_notes USING t_flagged_ord-salord4.
ENDCASE. " CASE E_COLUMN_ID ...
ENDMETHOD. " HANDLE_HOTSPOT
METHOD handle_top_of_page.
PERFORM write_report_header.
ENDMETHOD. " METHOD HANDLE_TOP_OF_PAGE
*/ Begin of Modification - Request No. DV2K904687
METHOD handle_toolbar.
DATA: ls_toolbar TYPE stb_button.
append a separator to normal toolbar
CLEAR ls_toolbar.
MOVE 3 TO ls_toolbar-butn_type.
APPEND ls_toolbar TO e_object->mt_toolbar.
CLEAR ls_toolbar.
append a button for Change Delivery Priority
MOVE 'CHNG_PRIO' TO ls_toolbar-function.
MOVE 'Change SO Delivery Priority'(048)
TO ls_toolbar-quickinfo.
MOVE 'Change SO Priority'(049) TO ls_toolbar-text.
MOVE 0 TO ls_toolbar-butn_type.
APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD. " handle_toolbar
METHOD handle_user_command.
DATA: t_sel_row TYPE lvc_t_roid,
gs_sel_row TYPE lvc_s_roid,
gs_flagged_ord LIKE t_flagged_ord,
lv_lines TYPE i.
CASE e_ucomm.
WHEN 'CHNG_PRIO'.
REFRESH t_sel_row.
CLEAR e_ucomm.
CALL METHOD gv_grid_flagged_ord->get_selected_rows
IMPORTING
et_row_no = t_sel_row.
CLEAR: t_flagged_ord,
gv_vbeln,
gv_posnr,
gv_del_prio.
DESCRIBE TABLE t_sel_row LINES lv_lines.
IF lv_lines GT 1.
MESSAGE i001 WITH 'Select only one row'(043).
ELSEIF lv_lines EQ 1.
READ TABLE t_sel_row INTO gs_sel_row INDEX 1.
READ TABLE t_flagged_ord INTO gs_flagged_ord
INDEX gs_sel_row-row_id.
IF sy-subrc EQ 0.
SPLIT gs_flagged_ord-salord4 AT '-' INTO gv_vbeln gv_posnr.
gv_del_prio = gs_flagged_ord-priority.
CLEAR: s_item, s_item[].
p_sonum = gv_vbeln.
p_delpr = gv_del_prio.
s_item-low = gv_posnr.
APPEND s_item TO s_item.
CLEAR s_item.
ENDIF. " IF sy-subrc EQ 0
ENDIF. " IF lv_lines GT 1
IF lv_lines LE 1.
CALL SELECTION-SCREEN '1100' STARTING AT 30 2
ENDING AT 110 7.
LEAVE TO SCREEN 100.
ENDIF.
ENDCASE. " CASE e_ucomm
ENDMETHOD. " handle_user_command
*/ End of Modification - Request No. DV2K904687
ENDCLASS. " LCL_EVENT_RECEIVER
" IMPLEMENTATION
Form WRITE_REPORT_HEADER *
This subroutine displays Report Header which includes *
Report Name, Executed by, Execution date, Execution Time *
There are no parameters to be passed to this subroutine *
FORM write_report_header.
DATA lv_rep_tit(72) TYPE c.
FORMAT COLOR COL_KEY.
MOVE sy-title TO lv_rep_tit.
CONDENSE lv_rep_tit.
SKIP 1.
WRITE: /3 sy-repid,
25 'California Steel Industries, Inc.'(040),
75 'Page'(041),
80(4) sy-pagno.
WRITE: /3 sy-uzeit,
25 lv_rep_tit,
75 sy-datum.
FORMAT RESET.
ENDFORM. " WRITE_REPORT_HEADER
At selection-output *
AT SELECTION-SCREEN OUTPUT.
CLEAR sy-ucomm.
IF sy-dynnr EQ '0500'.
Initialize layout variant for report-1
CLEAR gs_var_pre_prod_ord.
gs_var_pre_prod_ord-report = sy-cprog.
gs_var_pre_prod_ord-handle = c_handle1.
PERFORM initialize_layoutvariant CHANGING gs_var_pre_prod_ord.
p_var1 = gs_var_pre_prod_ord-variant.
Initialize layout variant for report-2
CLEAR gs_var_delinquent_ord.
gs_var_delinquent_ord-report = sy-cprog.
gs_var_delinquent_ord-handle = c_handle2.
PERFORM initialize_layoutvariant CHANGING gs_var_delinquent_ord.
p_var2 = gs_var_delinquent_ord-variant.
Initialize layout variant for report-3
CLEAR gs_var_processed_ord.
gs_var_processed_ord-report = sy-cprog.
gs_var_processed_ord-handle = c_handle3.
PERFORM initialize_layoutvariant CHANGING gs_var_processed_ord.
p_var3 = gs_var_processed_ord-variant.
Initialize layout variant for report-4
CLEAR gs_var_flagged_ord.
gs_var_flagged_ord-report = sy-cprog.
gs_var_flagged_ord-handle = c_handle4.
PERFORM initialize_layoutvariant CHANGING gs_var_flagged_ord.
p_var4 = gs_var_flagged_ord-variant.
*/ Begin of Modification - Request No. DV2K904687
ELSEIF sy-dynnr EQ '1100'.
DATA t_exclude TYPE TABLE OF sy-ucomm.
SET PF-STATUS 'MENU_1100'.
To use your own GUI status for a selection screen
CALL FUNCTION 'RS_SET_SELSCREEN_STATUS'
EXPORTING
p_status = 'MENU_1100'
TABLES
p_exclude = t_exclude.
ENDIF. " IF sy-dynnr EQ '0500'
*/ End of Modification - Request No. DV2K904687
At Selection Screen *
AT SELECTION-SCREEN.
*/ Begin of Modification - Request No. DV2K904687
CASE sy-dynnr.
WHEN '1100'.
IF sy-ucomm IS INITIAL.
CLEAR sy-ucomm.
LEAVE TO SCREEN 1100.
ENDIF. " IF sy-ucomm IS INITIAL
CASE sy-ucomm.
WHEN 'SAVE'.
CLEAR sy-ucomm.
Change Delivery Priority using BAPI method
PERFORM change_del_priority.
CLEAR: sy-ucomm,
gv_vbeln,
gv_posnr,
gv_del_prio,
p_sonum,
s_item,
s_item[],
p_delpr.
LEAVE TO SCREEN 0.
WHEN 'CANCEL'.
CLEAR: sy-ucomm,
gv_vbeln,
gv_posnr,
gv_del_prio,
p_sonum,
s_item,
s_item[],
p_delpr.
LEAVE TO SCREEN 0.
ENDCASE. " CASE sy-ucomm
WHEN '0500'.
IF sy-ucomm EQ 'CRET'.
LEAVE TO SCREEN 100.
ELSEIF sy-ucomm IS INITIAL.
LEAVE TO SCREEN 500.
ENDIF. " IF SY-UCOMM EQ 'CRET'
ENDCASE. " CASE sy-dynnr
*/ End of Modification - Request No. DV2K904687
Selection Screen: Validations *
AT SELECTION-SCREEN ON s_pernr.
Validate Employee Number
PERFORM validate_employee_number.
AT SELECTION-SCREEN ON s_kunnr.
Validate Customer Number
IF NOT s_kunnr IS INITIAL.
PERFORM validate_customer_number.
ENDIF. " IF NOT S_KUNNR IS INITIAL
AT SELECTION-SCREEN ON s_sortl.
Validate Search Term
IF NOT s_sortl IS INITIAL.
PERFORM validate_search_term.
ENDIF. " IF NOT S_SORTL IS INITIAL
AT SELECTION-SCREEN ON s_kondm.
Validate Product
IF NOT s_kondm IS INITIAL.
PERFORM validate_product.
ENDIF. " IF NOT S_KONDM IS INITIAL
Validate p_var1
AT SELECTION-SCREEN ON p_var1.
CLEAR gs_var_pre_prod_ord.
gs_var_pre_prod_ord-report = sy-cprog.
gs_var_pre_prod_ord-handle = c_handle1.
gs_var_pre_prod_ord-variant = p_var1.
IF p_var1 IS NOT INITIAL.
PERFORM validate_variant CHANGING gs_var_pre_prod_ord.
ENDIF. " IF P_VAR1 IS NOT INITIAL
Validate p_var2
AT SELECTION-SCREEN ON p_var2.
CLEAR gs_var_delinquent_ord.
gs_var_delinquent_ord-report = sy-cprog.
gs_var_delinquent_ord-handle = c_handle2.
gs_var_delinquent_ord-variant = p_var2.
IF p_var2 IS NOT INITIAL.
PERFORM validate_variant CHANGING gs_var_delinquent_ord.
ENDIF. " IF P_VAR2 IS NOT INITIAL
Validate p_var3
AT SELECTION-SCREEN ON p_var3.
CLEAR gs_var_processed_ord.
gs_var_processed_ord-report = sy-cprog.
gs_var_processed_ord-handle = c_handle3.
gs_var_processed_ord-variant = p_var3.
IF p_var3 IS NOT INITIAL.
PERFORM validate_variant CHANGING gs_var_processed_ord.
ENDIF. " IF P_VAR3 IS NOT INITIAL
Validate p_var4
AT SELECTION-SCREEN ON p_var4.
CLEAR gs_var_flagged_ord.
gs_var_flagged_ord-report = sy-cprog.
gs_var_flagged_ord-handle = c_handle4.
gs_var_flagged_ord-variant = p_var4.
IF p_var4 IS NOT INITIAL.
PERFORM validate_variant CHANGING gs_var_flagged_ord.
ENDIF. " IF P_VAR4 IS NOT INITIAL
Selection Screen: Value Request for ALV GRID Variants *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_var1.
CLEAR gs_var_pre_prod_ord.
gs_var_pre_prod_ord-report = sy-cprog.
gs_var_pre_prod_ord-handle = c_handle1.
PERFORM f4_variant CHANGING gs_var_pre_prod_ord
gv_exit.
IF gv_exit NE c_true.
p_var1 = gs_var_pre_prod_ord-variant.
ENDIF. " IF GV_EXIT NE c_true
F4 help for variant p_var2
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_var2.
CLEAR:
gs_var_delinquent_ord,
gv_exit.
gs_var_delinquent_ord-report = sy-cprog.
gs_var_delinquent_ord-handle = c_handle2.
PERFORM f4_variant CHANGING gs_var_delinquent_ord
gv_exit.
IF gv_exit NE c_true.
p_var2 = gs_var_delinquent_ord-variant.
ENDIF. " IF GV_EXIT NE c_true
F4 help for variant p_var3
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_var3.
CLEAR:
gs_var_processed_ord,
gv_exit.
gs_var_processed_ord-report = sy-cprog.
gs_var_processed_ord-handle = c_handle3.
PERFORM f4_variant CHANGING gs_var_processed_ord
gv_exit.
IF gv_exit NE c_true.
p_var3 = gs_var_processed_ord-variant.
ENDIF. " IF GV_EXIT NE c_true
F4 help for variant p_var4
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_var4.
CLEAR:
gs_var_flagged_ord,
gv_exit.
gs_var_flagged_ord-report = sy-cprog.
gs_var_flagged_ord-handle = c_handle4.
PERFORM f4_variant CHANGING gs_var_flagged_ord
gv_exit.
IF gv_exit NE c_true.
p_var4 = gs_var_flagged_ord-variant.
ENDIF. " IF GV_EXIT NE c_true
Form validate_employee_number *
This subroutine validates Employee Number *
There are no parameters to need be passed to this subroutine *
FORM validate_employee_number.
DATA lv_pernr LIKE vbpa-pernr.
SELECT SINGLE pernr
INTO lv_pernr
FROM vbpa
WHERE pernr IN s_pernr.
IF sy-subrc NE 0.
MESSAGE e001 WITH text-010.
ENDIF. " IF SY-SUBRC NE 0
CLEAR lv_pernr.
ENDFORM. " VALIDATE_EMPLOYEE_NUMBER
Form validate_customer_number *
This subroutine validates Customer Number *
There are no parameters need to be passed to this subroutine *
FORM validate_customer_number.
SELECT SINGLE kunnr
INTO t_common_data-kunnr
FROM kna1
WHERE kunnr IN s_kunnr.
IF sy-subrc NE 0.
MESSAGE e001 WITH text-011.
ENDIF. " IF SY-SUBRC NE 0
CLEAR t_common_data-kunnr.
ENDFORM. " VALIDATE_CUSTOMER_NUMBER
Form validate_search_term *
This subroutine validates Search Term *
There are no parameters need to be passed to this subroutine *
FORM validate_search_term.
SELECT SINGLE sortl
INTO t_customer_code-sortl
FROM kna1
WHERE sortl IN s_sortl.
IF sy-subrc NE 0.
MESSAGE e001 WITH text-012.
ENDIF. " IF SY-SUBRC NE 0
CLEAR t_customer_code-sortl.
ENDFORM. " VALIDATE_SEARCH_TERM
Form validate_product *
This subroutine validates Product *
There are no parameters need to be passed to this subroutine *
FORM validate_product.
SELECT SINGLE kondm
INTO t_ -
Problems with default domain with Weblogic 9.1 server
Hi,
Today I've been installing Weblogic 9.1 on our Red Hat (CentOS 4) server. After good experiences with BEA Weblogic local on my Windows machine I'm trying it on the server.
But after installing Weblogic and setting a default domain (automagicly generated) and trying to logon to the Admin Console I run into a problem.
When I login with false ID I it gives me a security alert and doesn't let me in, but if I login with the correct name+password it doesn't say anything but redirects me to the same login-page again...
I'm out of ideas on what it could be, and the biggest problem is that its the default domain it creates when I run the bin. Any ideas on what settings could do this?Ah, found some more information!
When I try to login with the ip adres it works but not when I use the hostname. Now I have a good indication on where to look to solve the problem.
Edited by Redcodenl at 12/07/2006 3:36 AM -
Problem with default program to open certain files.
My MacBook came with a trial version of Microsoft Office built in. Having already purchased a full version, I uninstalled the trial and installed the full version. The problem I am having is that when I go to open a Word document, it tries to open it with the trial version of Word that is no longer there. I tried changing the default program in Finder but it keeps switching back, thus giving me errors every time I try to open a Word document. If you could help it would be greatly appreciated. If you need more information, let me know.
MacBook Mac OS X (10.4.7)Pre-wife is not a term I am familiar with but I guess I catch your meaning .
It sounds like your Launch Services database may be corrupt. Try downloading a copy of Cocktail (shareware, but I think you can try it) and in the System pane, select Misc tab and click on the button to rebuild the Launch Services database. In rare cases, this database (which the Finder uses to maintain file associations) can get messed up.
bd -
Hello,
I have installed a ONPLUS agent in a network and where the device is connected to the network the Ricoh SP 5100N printers becomes unreachables in the network. It seems that the printers locks.
Somebody knows this issue?
Regards,
Vicente Ilerbaig.Vicente,
Shot in the dark here. If you're not using SMB Discovery on the ON100, you might consider turning that off. Shouldn't be an issue since it's a printer but the perfect set of circumstances might trigger some sort of security protocol or preventative measure on the Ricoh to self preserve. Another option might be to turn off the NetBIOS Discovery in the ON100. Though this will deminish the value of OnPlus it might help in troubleshooting down the root cause if it does remedy it. Both can be turned off by drilling into the ON100 for the site in OnPlus, selecting Device Options and unchecking the respective boxees. For troubleshooting purposes I would recommend doing one at a time. If you're not using the SMB Discovery, I would recommend turning it off by default to prevent getting security failures on Windows devices with the source of ON100.
Questions
If you remove the ON100 from the network and restart the Ricoh printers, do they go back to working without issue?
If so, when you put the ON100 back on the network, how long does it take before they become unreachable again?
As well, when you look in OnPlus, did the ON100 detect them and if so what did it determine the devices to be? -
Problems with Managed Printers
Our school has two main types of users: Faculty and Students. We want Students to be able to print to one list of printers and Faculty to print to a different list. In Workgroup Manager I have specified the lists and when a user logs in they can see that list and print with no issues. The problem is that after they log out of a public computer, their list is not cleared away. So if a Faculty user logs in after a Student user (or vice-versa), they can now see both lists of printers combined. Is there something I am missing to make this work?
Thanks for your help.Hi Jason,
Before going further, sorry for the late response.
>>If I create a test account and login to the same PC as a student that doesn't get the printers it works fine for about 9-10 logins and then it starts happening to the test account. Its like the problem takes a few logins to occur
Based on the description, after the issue occurs, please log out the users, log in again, and then run the command
gpresult/h gpreport.html to collect group policy result to check if the group policy settings still apply correctly.
Besides, what printers do we use? For this involves third party hardware product, and in order to better troubleshoot the issue, we can also contact vendor company to see if they have some suggestions for this issue.
Best regards,
Frank Shen -
HP LaserJet Pro MFP M125nw problem with printing printers key
Hi
I would like to print page with printers code for HPePrint center in order to add printer to the service. When I switch on this service - I get information that test page with configuration will be printed - and HP is not printing anything.
Other reports are printed correctly, just after click, only that one does not work.
Thank you
This question was solved.
View Solution.Hi @Martin1982,
Thank you for taking the time to answer my questions, I do appreciate it.
Please set a manual IP address and manual DNS servers for the printer. The steps can be found in the Printer Does Not Maintain Wireless Connection document. It is Solution Three. For the Primary DNS Server please use 209.244.0.3 and for the Alternate DNS server please use 209.244.0.4. These are Level3’s public DNS servers.
Please let me know the outcome.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP -
Exchange 2013: Problem with Default Global Address List after migration
I just completed a migration from Exchange 2007 to Exchange 2013. The 2007 box has been decommissioned just last week. I have been seeing weird issues with our offline addressbook and global address list, since the migration, but always thought
it was related to Ex2007. Well the issues still exist and here's what i've found so far:
1. If any user goes to Schedule Appointment in Outlook, and they click the Rooms button (on the Scheduling Assistant page), we get a LONG wait (about 5 mins or more) and then an error that says: "The operation could not be completed because
an offline address book is not available. Download a copy of the offline address book." When i click OK, the address book is up, with the "All Rooms" list showing blank (we have 3 rooms in Exchange currently).
2. Now if I go to the Address Book in Outlook it opens to the GAL and it's up to date... I can also force an update to the offline address book after adding a new group or entry, so i know offline address books are being updated properly and
working. HOWEVER, if i go to any of the other address lists (besides Contacts and GAL) under All Address Lists (All Contacts, All Groups, All Rooms, All Users and Public Folders) I get the same error given above: "The operation could not be
completed because an offline address book is not available. Download a copy of the offline address book."
3. I went to the Exchange 2013 EAC and went to Organization -> Address Lists. Everything under here said 'NO' under the Up-to-Date column. When i looked at the properties on each list, and clicked save, I had to update to the new version.
After doing this, the Up-to-Date column said 'YES'. I could do all lists EXCEPT for the GAL. It still says 'NO'
4. The last thing i did was set my Outlook to NOT be in cached mode. This should give me a direct connection to the GAL and all lists, if I'm not mistaken... So when i do this, I cannot even open see the GAL. The ONLY option in the
Address Book that comes up is Contacts (which are my personal ones).
5. I just now ran Get-GlobalAddressList | fl in powershell on the Ex2013 server. I see some things that make me wonder... First; nothing in the RecipientFilter field, however, there is something in the LdapRecipientFilter field.
Second; the RecipientFilterType field says "Legacy". and Third; the RecipientFilterApplied field says "False".
Didn't know what these should all be, but it appears maybe this is the cause of all my issues?? Can someone help me out here.. even if i have to recreate a new GAL, i'm fine with that, I just don't know all the steps to do so. I just need it
to work!
Thanks
Jeff
-JeffHi,
In my opinion, it is better to confirm whether the GAL is good, first.
How about the GAL working in OWA?
If GAL working well in OWA, it seems the issue on the Outlook Client or Connectivity side.
Please trying to run Outlook on the safe mode to avoid some AVs, add-ins and firewall for testing.
Please follow the steps as below to narrow down the OAB issue.
Following are the locations that .lzx files in CAS server and BMX server:
CAS:
C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\OAB
MBX:
C:\Program Files\Micorosft\Exchange Server\V15\ExchangeOAB
Please verify whether the .lzx files update to the latest.
1. If the .lzx files in MBX server not update to the latest.
It should be an issue on the OAB generation side.
2. If the .lzx files in MBX server is latest, but CAS server not.
It should be a distribution issue.
1) Please run Get-OabVirtualDirectory command in EMS to verify whether at least one OAB VD exist in the org. If not, please create a new one.
2) Please make sure whether any setup for Web Distribution. Selecting the “Enabling an Offline Address Book for Web Distribution” checkbox.
3) Please force restart File Distribution services to distribute OAB files manually.
3. If the .lzx files in MBX server and CAS server are all update to the latest.
It should be the connectivity between CAS server and Client issue.
1)Please verify the network.
2)Please check DNS, MX, etc. configuration.
3)Please run “Test E-mail AutoConfiguration” to check the AutoDiscover details.
Please make sure the OAB URLs are correct.
If the OAB URLs are incorrect, please using following command to re-set them:
Set-OABVirtualDirectory -Identity "ServerFQDN\OAB (Default Web Site)" -ExternalUrl
https://www.contoso.com/OAB -InternalUrl
https://mail.contoso.com/OAB
4)Please checking the App log and finding solutions from Microsoft Technet articles or KB, according to the Event ID.
5)If it still not working after performing the methods above unfortunately, please trying to re-build OAB Virtual Directory.
Article for reference:
Remove, Re-Create, and Reconnect an Offline Address Book Virtual Directory
http://technet.microsoft.com/en-us/library/bb123595(v=exchg.141).aspx
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support -
Problem with default namespaces
Hello,
I'm using version 2.3.10 of Berkeley XML.
All my XML documents have a default namespace declared in the root element, like this:
<rootElement xmlns="http://www....something.../something">
but I get errors when I query the documents - and the only way of avoiding the errors seems to be by manually removing the default namespace attribute.
I tried setting the XmlQueryContext.setNamespace("", myUri) - but it doesn't work. I saw this mentioned in another post - and you said it was scheduled to work that way in the next release.
Can you tell me when the next release will be, and what I can do right now to get around this problem. I need to keep the xmlns attribute in the root element since I have other applications which need to access the documents before I put them into the database and they make use of it.
Kind Regards
Swami KevalaHi Swami,
You have two options:
1) Bind a prefix to your namespace URI, and use that prefix in your queries:
XmlQueryContext.setNamespace("pre", myUri);
XmlManager.query("/pre:rootElement", qc);
2) Bind the default element namespace inside the query:
XmlManager.query("declare default element namespace \"" + myUri + "\"; /rootElement", qc);
John -
Case structure problem with default 0, 1, 2
Good afternoon,
I have a question about the case structure. If you use 3 cases, default 0, 1 and 2, like in the following VI.
How can you fix that the sum is never 3? Because when you turn on the switch 1 and 2 simultaneously it gives the sum 3 and the case will go in the default stand.
Thanks for the help.
Solved!
Go to Solution.
Attachments:
case_structure_question.vi 11 KBI recommend changing to using an Event Structure. That way you react to when a switch is toggled instead of constantly polling.
What I would do is, with the Event Structure, have a case for each switch's value change. In the event case, you use a property node to set the Disabled property of the other switch based on the current switches value (Switch 1 goes true, so disable switch 2)
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Maybe you are looking for
-
I accidentally deleted my iMovie project file, thinking I no longer needed it. Where are the clips stored that I was using with that project? Does deleting the project also delete all those clips, making me have to record them from my camera again, o
-
Hi there, I haven't been able to find a solution to my problem so I thought I'd post here. I have Mac OS X Server 10.4.11 running my home network as a gateway. I've managed to get most things working that I needed through the firewall but Xbox Live i
-
Hi, Could someone tell me how I could shut down SCM and live cache automatically (with a script), for an offline backup? (and the reverse start the DB, LC and SCM after the backup?) SCM on Windows, and Oracle DB. Thanks Randy Emeran
-
How can I update the trigger table?
I need a insert trigger on a table and also wants to insert the result value in one of its field. it gives mutating error........ so wots the way of updating it? how can i update the same table.
-
I told Siri to go away, and she did. How do I get her back??
SIRI HAS DISAPPEARED ON MY iPHONE? HOW DO i RE-GAIN HER?