Problem with delay printing utilizing a canon IR c1030 with the lasted drivers

Hi, I am a total noob at Mac OS
I have Macbook pro with Mountain Lion installed I also have conected to our organization a Airport Express which I use around the office. The problem is that my department have a network printer Canon IR C1030 which I installed the lasted driver UFRII but when I print its takes a very long time and most time a get the error code: 9 and out of 10 pages I get only 3 to 4.my guesss is that is a problem with the Airport Express and latency but I am not sure. could someone give me a clue what to do next
Thanks in advance

Does the iR C1030 have support for WiFi or is it using it's built-in Ethernet port to connect to the AirPort Express? Or are you using the USB port on the C1030 to connect to the Express?
If the C1030 is connecting to the Express via Ethernet, then as a test I would suggest you connect the MacBook Pro to the Express via Ethernet also.
Note that if there is only a single Ethernet port on the Express then you will need a unswitched hub to connect to this port on the Express and then you can connect the Mac and C1030 to the other Ethernet ports on the hub.
If you get the same latency when printing from Mac for this Ethernet-only setup, then this would confirm that it is not a WiFi issue and there is something else contributing to the delay.

Similar Messages

Problem with HP Printer Utility and Mac OSX 10.5.4

I have a problem with HP printer Utility. When a standard user adds a new paper profile HP Printer Utility asks to type an administrator's name and password to allow HP printer Utility to make changes. Is it possible to avoid this? Otherwise I have to give admin rights to every user because they have to be able to add new papers. HP printer Utility sharing and permisssions are set to read and write to everyone.
HP designjet Z3200
MacOSX 10.5.4 (Mac pro intel)
HP printer utility 3.6.0.

Just found an email HP Support sent to me back in January 2008, about this issue
"Hello Hunter,
Thank you for contacting HP Total Care.
There currently is not proper driver for 10.5, so it is surprising that the printer is printing correctly on your Mac from any application.
Your issue cannot be resolved until the 10.5 driver is developed and released.
To sign up for an update as soon as it is available ...click on the link below:
HP's subscriber's choice is a free service where you can select to receive timely email notifications ranging from software and driver updates to creative ways to do more with your HP products.
http://h71036.www7.hp.com/hho/html/3618-0-0-225-121.html
If you need further assistance, please reply to this message and we will be happy to assist you further.
You may receive an e-mail survey regarding your e-mail support experience. We would appreciate your feedback.
For information on keeping your HP and Compaq products up and running, please visit our Web site
at:
http://www.hp.com/go/totalcare
Sincerely,
Dave
HP Total Care"
I just sent them an email today on any updates regarding a release date on the Leopard driver for P1005, i'll post any info i receive.

I use an iMac 10.6.8 with iPhoto '09 to download digital images from Canon DSLRs. Until the last two weeks there has been no trouble whatever importing images by a USB connection from either camera to the Mac. Now the process will not kick in. Any ideas?

I use an Mac OSX 10.6.8 with iPhoto 09 to download digital images from two Canon DSLRs. Until the last week, there has been no problem whatever in launching the import procedure once the USB connection has been connected and the camera switched on. Now the process will not kick in at all for either camera. I can't find a solution through iPhoto help or from other sources.
Any ideas to fix? (I admit I have not tested the USB cable at this time).

What does "kick in" mean?
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Post back with the result.

Has anyone else developed the problem of an over-sensitive MacBook AIr cursor? In the last few days mine has developed a mind of its own, and when you move it to the desired spot it can jump quite randomly. In mail, I try reply but it's jumped to "fwd"!

Has anyone else developed the problem of an over-sensitive MacBook AIr cursor? In the last few days mine has developed a mind of its own, and when you move it to the desired spot it can jump quite randomly. In mail, I try reply but it's jumped to "fwd" instead! Irritating.

Jumpy Trackpad
http://support.apple.com/kb/TS1449

Print PDF with special print options of Canon IR printer

Hi,
We have a collection (db driven) of PDF documents that we want to send to our network printers. Some document need a hole punch of some other specific printeroptions of a Canon IR printer.
The ideal solutions is a windows application where i could define virtual printers with their print options (pdf and printer specific).
Eg:
A user creates in a the windows app a virtual printer with name and print options
- FastPunch: Printer IR5570 with hole punch
- Fast: Printer IR5570
- Color: IR C4080
- ColorBooklet: IR C4080 with booklet options
When the app starts its batch it will look at de db and find rows with an PDF and the name of a virtual printer. The documents are printed with specific printer preferences.
Does someone has experience with such an solution? Tips?
Someone wants to make this in vb.net (or c#)? What cost?
gtx, Pierre

I have downloaded the Acrobat SDK but I haven't really waded through the documentation or samples yet. I've only been working on this project for about 3 days now and not full time. This isn't the highest priority at work. I've worked a bit with the adobe reader control and that looks like it has some promise.
I have two significant problems:
1) I don't want the user to see any windows appear other than my console application. That way I have it working right now, Acrobat is required and appears minimized while the file is spooled and then is closed after spooling completes. Not so horrible but I'd like to get away from it if possible. To print the file right now I'm using the startprocess module or something (new version of shell I think). I'm starting the pdf with the verb "Printto" and that tells Acrobat to print to a printer that I specify.
2)Biggest problem. I have no reliable way to change the number of copies or any other print settings. I am not willing to write a program that spools a single copy multiple times just to get multiple copies. Currently my program uses rundll to open a printer preferences dialog, and SendKeys to modify the print settings. This means that the computer cannot be used while automated printing is occurring.
Right now the program's only saving grace is that it allows the user to be ignorant of the job settings so that all the user has to do is indicate an item number and quantity and walk away (hoping nothing changes the focus and derails SendKeys - but we know that kind of thing never happens in XP :P )

Printer Utility for Canon i9900 and OS 10.5.4

I'm having trouble getting my System to recognize the printer utility for my Canon i9900. I can print with the standard mac printer utility but I don't get all the functionality. I've tried Printfab as well, no luck. Any ideas?

How is the printer connected? Usually the utility will only work if the printer is connected via usb. I don't think there is a Gutenprint driver for this printer, but the utility will also only work when the printer has been added with the manufacturer's driver.
Hope this helps.

I've had problems trying to print on my hp envy 4500, with my hp chromebook 14.

has anyone else had trouble printing from hp chromebook 14?
i have an hp envy 4500 printer,

Hi marshasue,
Welcome to the HP Support Forums. I understand that you are encountering difficulties when printing from your Chromebook to your Envy 4500 printer.
To better assist you, would you please provide some additional information:
How is the printer connected (USB cable, wireless direct, or wireless)?
Are you getting any error messages? If yes, what do they say?
Have you setup the ePrint feature of the printer? If yes, did you customize the printer’s ePrint email address?
Have you setup Google Cloud print?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

I'm trying to print an Ancestry document from an iPad 2 using air print onto a Canon 5350 (one of the printers ok'd by Apple) I am unable to change the print orientation from portrait to landscape. That is I change it in printer settings but no use.

I'm trying to print an Ancestry document from an iPad 2 using air print. The printer is a Canon MG5350 (on the Apple approved list) I have no difficulty printing but only in portrait format. I've tried changing printer preferences from my computer but even though the Canon accepts the changes it will not print landscape - can anyone advise please?

Hi,
How do you connect the printer to the XP machine ? If USB, you need to make that machine as a Print server. Please try this:
http://techtips.salon.com/make-windows-computer-print-server-11914.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HT204380 I have 8 mb of broadband and am unable to use facetime as it loses the connection. The same happens with Viber. This seems to have happened since the last software update. Has anybody else had this problem.Regards, Kevin

I have 8 mbs of broadband but it does not seem to be adequate for using Facetime or Viber. I lose the connection via Facetime every few minutes and Viber doesn't work at all. It always says that the network connection is poor yet it's showing a full signal on the phone. It was a lot better before the last software update. has anybody else had this problem.
Regards,
Kevin

CS2 is very old and reached its "end of life" a while back. So probably won't run on modern operating systems. If you can still run it, you'll need to uninstall what you have and re-install with the download link below to activate it.
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Nancy O.

My Macpro Intel Core Duo-running OS 10.6.8 has been crashing pretty much with everything I try to open. I find the last resort will be to boot from Snow Leopard system disc. Has anyone experienced this? I can only run Google Chrome.

In the last few days, it seems that my computer has all of a sudden caught a virus. I have never had that happened to a computer, but I have surely heard about it. I can't think of any other reason it is behaving like this. I know that Macs have been pretty much impervious to viruses, but that was before they were the majority of users.
Anyway, what is happening is, my computer keeps crashing whenever I try to open a program, app, document, folder, file, etc. I tried to boot from Drive Genius to establish the problem, but Drive Genius crashed too. I know the last ditch effort (after cleaning and maintenance of disc verification and permissions and repairs, is to reboot from the system disc.
Before I go there I was hoping someone in the community would have a suggestion to help me avoid that ultimate last resort. The tech support guy at Drive Genius told me that probably would have to be the way to go (as in reboot) and if that doesn't clear it up, it's repair time.
Thank you for your consideration in advance;
Lorain R

In the last few days, it seems that my computer has all of a sudden caught a virus.
As others have pointed out, this isn't malware. That should not be your first (or even fifty-first) thought when your Mac starts misbehaving. For more on this topic, see my Mac Malware Guide.
I know the last ditch effort (after cleaning and maintenance of disc verification and permissions and repairs, is to reboot from the system disc.
You mention "cleaning and maintenance." Have you been running utilities claiming to do those things? If so, you may be the victim of an overly-zealous cleaning job, which has removed important files and damaged your system.
If I'm understanding correctly, you're unable to open any applications at all... is that right? Do you have any backups? If you don't have backups, you're in a sticky situation, as it will be difficult to make backups in your current state, but you shouldn't try any kind of repairs without them. (Actually, you shouldn't do anything with your computer without backups, but this is especially important when something is going badly wrong.)
If you have backups, reboot from your Snow Leopard install disc. From there, first, repair the hard drive with Disk Utility. Once that is done, assuming repairs were successful, reinstall the system. You can simply reinstall it on top of your current system, and it will replace any damaged or lost system files with new copies. (You'll also need to update the system via Software Update after reinstalling.)
If you don't have backups, or if Disk Utility can't repair damage, or if the problem continues even after a reinstall, post back with those details.

Photo Page with lots of pix - any way to jump to the last page?

I have a photo album with 112 pix in it, and it's set to display 21 photos per page w/ 3 columns. This makes for a total of 6 pages.
The way the page navigation shows up, at least in Safari, is as follows:
< 1 2 3 4 >
Oddly, in iWeb it shows:
< 1 2 3 4 5>
I continually am adding photos to this album, but I think that people may not realize that there are more than 4 pages. The only clue is that the right arrow is not grayed out, which is too subtle.
If you click on the "4", and then click the right arrow, it now displays 1-5 like in iWeb. Clicking on it one more time then displays 2-6.
If all of the pages can't be displayed for space reasons, some indication of how many pages total would be helpful, and/or a "last" link to jump to the last page.
On this discussions site, for example, doing a search with multiple pages of results brings up the following:
Pages: 12 *| 1 2 3 4 5 6 7 8 9 10 | Next |*
This makes it obvious how much content there is, and how far you have to go to get to the end. Is there any way to get something similar on an iWeb page? I think people are missing my latest additions because they don't know they're there, and there's no easy way to get to the newest stuff.
Thanks!

I couldn't get the other "jump to the last page" script to work at all; it winds up screwing up the display to where it shows two pages at a time slightly offset from one another.
It's more likely that you web host servers take time to serve the page and its element, I ran into similar problem while helping out another person in this forum.
But, while I'm finally seeing the page count directly above the page navigation numbers, it's indicating that there are 7 pages when in fact there are 8, and I'm wondering why it disappears after changing to any other page (it doesn't reappear even on the first page without doing a refresh). I've tried this with the same results in Safari 3.1.2 & Firefox 3.01.
My bad, all these computing have concept of zero , I messed up with that
I also found that the bottom paginate navigation cause problem, so I added more code to handle that.
The result may not be desired but cause the page count flashed when you go from one page to the next, quite annoying. Give this a try:
<script type='text/javascript'>
var headerControlsWidget;
var footerControlsWidget;
function setPageCount() {
try {
headerControlsWidget = parent.document.getElementsByClassName('com-apple-iweb-widget-headercontrols')[ 0].widget;
if (headerControlsWidget) {
footerControlsWidget = parent.document.getElementsByClassName('com-apple-iweb-widget-footercontrols')[ 0].widget;
entriesPerPage = headerControlsWidget.preferences.entriesPerPage;
entriesCount = headerControlsWidget.preferences.entryCount;
pageCount = parseInt(entriesCount/entriesPerPage) + 1; // adjust to true count, if needed;
newDiv = parent.document.createElement('div');
newDiv.id = 'pageCount';
newDiv.innerHTML = 'Pages: ' + pageCount;
if (!(parent.document.getElementById('pageCount'))) {
paginateDiv = parent.document.getElementById(headerControlsWidget.instanceID + '-pagination_controls')
paginateDiv.insertBefore(newDiv, paginateDiv.firstChild);
} catch(e) {}
function initPageCount() {
setPageCount();
headerControlsWidget = parent.document.getElementsByClassName('com-apple-iweb-widget-headercontrols')[ 0].widget;
paginateDiv = parent.document.getElementById(headerControlsWidget.instanceID + '-pagination_controls')
paginateDiv.addEventListener('click', function() {setTimeout('setPageCount()', 250);});
footerControlsWidget = parent.document.getElementsByClassName('com-apple-iweb-widget-footercontrols')[ 0].widget;
paginateDiv = parent.document.getElementById(footerControlsWidget.instanceID + '-pagination_controls')
paginateDiv.addEventListener('click', function() {setTimeout('setPageCount()', 250);});
clearInterval(chkHdrCntl);
chkHdrCntl = setInterval('initPageCount()', 500);
</script>

Disk Utility Error "Unable to write to the last block of the device"

I have a WD Caviar Black 1TB drive in an OWC Mercury Elite-AL Pro Quad Interface enclosure. I have been using it as a Time Machine back up volume without any trouble. I recently upgraded to Lion and within a week I had a back up fail. I tried repairing the disk, and then tried erasing it, but that failed as well with the error saying that it was "Unable to write to the last block of the device". This would seem to be the drive failing, but there are many reports in the Apple forums of back up drives giving this error after a Lion upgrade and I am thinking it's some kind of issue with drive needing some kind of firmware update or special formatting. I thought you guys might be familiar with the issue and have a fix. Right now the disk is dead in the water and can't be reformatted.

I have exactly the same set up I described above in two different locations (one at home, and one at work). I swap the Time Machine BUP drive when I get to each location and therefore leave my most recent back up at home or work when I leave each place. That worked fine for a couple of years. Then after the Lion upgrade, I started having issues with the two drives. In both cases, I had to lose all my BUP history in Time Machine and start over with a fresh back up. The set up at home, let me do it by reformatting the drive and then doing a new back up (I was frustrated I lost all the incremental back ups, the whole point to "Time" Machine, but I was able to get a new BUP established and start over). At work, however, I had the issue described in my original post where I couldn't reofrmat the drive. I was at a standstill and that's why I posted my issue. A couple of weeks later, I got to work, plugged in the drive and it let me reformat it like nothing there was never a problem. I made a fresh Time Machine BUP and everything was back to normal (albeit with a new BUP). I can't tell you what changed ... It's possible there was a software update that snuck in and updated drivers or something without me being aware of it, but I haven't got a clue. All I know is it's resolved and I am back to backing up as before ... Most importantly is to note it was not the drive that failed. So, there's the update for you, I wish you luck with your drive.

How to print grandtotal in table footer only in the last page in SMARTFORMS

Hello Experts,
How do I print the GRANDTOTAL in the table footer only on the LAST PAGE in SMARTFORMS.
What I have done is in the text element of CELL1 of the table footer i wrote the folowing logic but not working.
/: IF &SFSY-PAGE& EQ &SFSY-FORMPAGES&.
* V_SUM.
/: ENDIF.
I even tried this.
/: IF &NEXT-PAGE& EQ 0.
* V_SUM.
/: ENDIF.
but still it displays the grand total on all pages at table footer.
How do i go for this experts.
Regards,
Ranjith N

HI Nambiar,
To print the grand total only on the last page then create the secondary window --> create the text node for the grand total -->In the condition tab check only after the end of the main window.
This grand total will be displayed after all the items and end of the main window.
Footer in the table displays as the subtotals i.e on every page total is displayed..
Regards,
Sravanthi

Is anyone else noticed a problem managing pocasts for your Iphone or other device since the last upgrade? When I select podcast to manage those specific to my device Itunes freezes.

My Itunes freezes everytime I try to mangage the Podcasts specific to the device plugged in. All other tabs work fine. apps, photos ect.

I too have same problem which has started in the last week or 10 days. I use Windows 7 (up to date) and latest Itunes and Iphone 4 all up to date
MM
PLEASE HELP

Is there a way to print using a canon bjc-85 with tiger?

i have just installed tiger and now my canon bjc-85 printer doesn't work with it.
i have read the thread discussing this problem, and i'd be very grateful uf anyone can tell me in simple language how i can overcome this apparent incompatibility?
kind regards
paul godfrey

the product is support on mac os tiger. you just need to download the drivers for the product. if you have the black ink tank installed it will not print until you change the cartridge type in the printer settings under the quailty and media menu.

Problem with delay printing utilizing a canon IR c1030 with the lasted drivers

Similar Messages

Maybe you are looking for