Problem with multi-clip... viewing angles during playback

Hi everyone, this is my first post here.
I'm having trouble with my multi-clips. I create the clip with three clips, and set it up to view 4 angles at once. However, sometimes during play-back, the viewer will revert to a single view of whichever view is currently selected. How do I keep this from happening? I made sure it's set to "open", and still set on 4-up. I have no idea what's causing it.

Welcome to the forum,
My guess is you've allowed the multiclip to render (causes single frame viewing only)...
I'll usually...dbl-click multiclip in timeline, then set it for open with viewer window button, then single click in an empty space in the timeline.
So, try deleting renders and the second suggestion...see if that helps.
Further, I've set a keyboard shortcut for the 'open' function, so now all I have to do is dbl-click multiclip, hit the '/' key, then click in open space in timeline.
Hope that helps,
K

Similar Messages

Problem with tracking relative to latency during playback

Hi all,
I'm pretty new to Logic but have been using software sequencers for a couple years now (Pro-tools/Reason/Ableton Live) so I'm wondering what I'm forgetting/doing incorrectly when I track any live sound and hear that it's offset from the global tempo when I play back.
In other words I'm pretty sure I have the basics set up correctly but I'm still having the latency issues with tracking live audio; the low latency mode is on, HD buffer size is at 256, I've installed the latest firmware for my interface (motu 8 pre-fire wire). Maybe the follow tempo button in inspector being checked would help... just read about that but I'm not at my computer to try.
Any trouble shooting suggestions would be greatly appreciated.
Thanks!

A Buffer I/O setting of 256 is a pretty high setting for tracking. That's giving you 5.8 ms of latency at 44.1K, and 5.3 ms latency at 48K. That's enough to throw off otherwise tight timing.
That's the first thing.
Second thing is that you should probably check your recording delay setting. If it's set to zero then you need to do a loopback test to assess the recording latency and then plug in the appropriate value so that your recorded tracks play back where they should.
Go to this link [http://discussions.apple.com/thread.jspa?messageID=5412800&#5412800] and look for my long post towards the bottom. The procedure for setting your recording delay is outlined in detail. Don't be put off by the number of steps --- it's a procedure you only need to do once.
And make sure that when you do the test that you start with a fresh Logic song/project with NO plugins anywhere, and have PDC switched off.
Still, I'd recommend setting your buffer size to 64 or better, 32 (if you can get away with it).

Problem with Local DCs View in NWDS

Hi!
I' ve got a problem with Local DCs view in NWDS: None of the standard-DCs (BI_MMR, BI_UDI, CAF a.s.o.) can be expanded and show their content. I already reinstalled IDE, but without success.
Has anybody got an idea?
Thanks a lot in advance!
Regards,
Thomas

Your setup might be incomplete: The SAR file extraction creates very long paths on your filesystem. If you do not extract to the rootfolder of disk, chances are the paths become too long and the installation exits, without any warning.
If this is not the cause of your problem, check if the .dcdef files for the local DCs (plugin com.sap.tc.ap if I'm correct) were copied during installation.

Two problems with audio clips

Hello,
I'm having two problems with audio clips:
1. When I try to drag a clip from the viewer, I can't do it because it won't let me drag the clip. It only lets me drag the pointer around within the clip.
2. When I drag an audio clip from the browser into the timeline I don't get any audio, just a series of beeps (and yes, my audio media is on-line -- I can listen to it in the viewer, just not the timeline).
What am I doing wrong?
Thanks.

1. Drag the little hand on speaker icon to drag from
the Viewer...
Thanks! (Does it actually say that in the documentation anywhere? I try to RTFM, but the FM seems to be a little, er, mute on this point.)
2. It means your sequence settings don't match the
properties of the source audio you're putting in it,
and you either need to change the settings in the
sequence, or render the audio.
Ah, that would explain it. Thanks!

Problem with Local DCs View in NWDS 7.0

Hi!
I' ve got a problem with Local DCs view in NWDS: None of the standard-DCs (BI_MMR, BI_UDI, CAF a.s.o.) can be expanded and show their content. I already reinstalled IDE, but without success.
Has anybody got an idea?
Thanks a lot in advance!
Regards,
Thomas

Hi,
This is due to some files missed in Local development.
Let me know Are you able to see .confdef, .syncdb and buildvariant.config files under Local Developement.
If you are not able to see, UnInstall your NWDS, Remove Local developement under .dtc folder, then Re-Install NWDS.
Hope this will help you.
Thanks & Regards
Vasundhara

Problem with pdf chrome viewer and javascript

I have a problem with chrome pdf viewer. We have created a form with acrobat 9 pro, this form contains a javascript. When the form is printed or saved the javascript checks that all the mandatiry fields are completed and displays a message if some fields are uncompleted. The chrome pdf viewer doesn't display the warning message when the form is saved, and doesn't display the check box included in the warning message pop up to confirm that the user accepts to print the form. The control is correct with FF et IE
Thanks for your help

There are many PDF viewers. Adobe's, third party downloads, things that come with systems (Apple Preview, Microsoft 8 Reader), things built into browsers (Chrome, Firefox...) Adobe's software understands the full set of JavaScript. Some ignoresJavaScript altogether. Some do selected JavaScript. This is a bit of a mess, but nothing can be done about it EXCEPT that you can demand your users use Adobe Reader. Whether they actually will depends on how important your needs are to them.

Problem with the crystal viewer

Hi there,
I have a problem with thw crystal viewer. I have reports developped in Crystal XI that run in vb.net within the "CrystalDecision.Windows.Forms.CrystalReportViewer" object. On all computer client everything works fin except on one of them. When the print button is pressed, it gave a "Object reference not set to an instance of an object" error. Since this error is raised by the "Crystal report windows form viewer" preview window i have no idea why this occured. We tried to uninstall the viewer and reinstall it without chance.
The only thing i can tell is that this client use a "HP deskjet 3420 series" printer. that's the only difference there is on this computer. Anyone as an idea?
Thanks
Ben

Hi Ben,
Try moving that printer to another PC and install the print driver. If it fails there it's likely a driver issue. HP and Cr has a history of problems. Mostly it's HP drivers returning the wrong memory structure size.
If you can find someone who is using Windows XP and Windows 2003 and see if either work. Or possibly plug the printer ina print server and see if that works.
Next option is if you wrote the software you are running run it in debug mode and see if it captures anything when printing. If did not write it then ask the person who did to test it also.
Next option if you want to dig deeper into the cause is go to Windows site and download a program called DebugDiag. Run this program and set it to capture crashes. It will generate a dump file which can be analyzed. It should tell you which API or function caused the crash.
Thank you
Don

Problems with Standard Apps views (eBusiness Suite)

Hi all,
I am working with Oracle Application Express and Oracle eBusiness Suite 11.5.10. We have integrated OAE with EBS, but now we are having problems with the standard views (owner APPS).
I would need the help from somebody that works with OAE and EBS.
Once we want to query one of the standard views, like ap_invoices, it is necessary to initialize the session with a script like this:
begin
DBMS_APPLICATION_INFO.SET_CLIENT_INFO(219);
end;
This script lets us to access to the data from the table AP_INVOICES_ALL using the view AP_INVOICES.
Once I have run the script from SQL Commands (SQL Workshop), I try to run a query using the standard view, for example:
SELECT * FROM apps.ap_invoices
From a Report or from SQL Commands (SQL Workshop) always I get the next error:
"ORA-01722: invalid number."
However, if I run this query from SQL Plus (same db user), there is any problem, the query works and retrieves rows.
If I get the source code of the view, remove all the columns, keeping the next SQL:
SELECT 1
FROM ap.AP_INVOICES_ALL
WHERE NVL(ORG_ID,NVL(TO_NUMBER(DECODE(SUBSTRB(USERENV('CLIENT_INFO'),1,1),' ',NULL,SUBSTRB(USERENV('CLIENT_INFO'),1,10))),-99)) = NVL(TO_NUMBER(DECODE(SUBSTRB(USERENV('CLIENT_INFO'),1,1),' ',NULL,SUBSTRB(USERENV('CLIENT_INFO'),1,10))),-99)
Run this SQL in OAE and I obtain the error again, however from SQL Plus the query works correctly.
I suppose somebody that works this EBS and OAE has had this problem. How did you solve it?
Thanks in advance.
Regards, Luis
PD. I have tried to not used the views and use the tables filtering the ORG_ID and looks it can work, but I do not like this option.

Luis - I don't know where you are running these blocks - the SQL Command Processor in APEX? Anyway, for every APEX page request the engine executes something like the following, depending on your version:    begin
    dbms_application_info.set_client_info(g_user);
    dbms_session.set_identifier(substr(g_user,1,(64 - length(g_instance)-1))||':'||to_char(g_instance));
    dbms_application_info.set_module('APEX:APPLICATION '||to_char(g_flow_id),'PAGE '||to_char(g_flow_step_id));
    exception when others then null;
    end;In the above code, the value of g_user is the logged-in username, perhaps ADMIN in your case.
Keep in mind that when you do a set_client_info in the database session, that persists only for the duration of the session. On the next page request, you'll get a new database session (or a recycled one).
Scott

Having problems with adobe premiere 8 freezing. cannot playback my videos. also, when i try to burn to DVD, does not recognize burner.

having problems with adobe premiere 8 freezing. cannot playback my videos. also, when i try to burn to DVD, does not recognize burner. losing my work constantly cause of freezes and crashes.

sunchick116
Thanks for the reply.
Anytime I am getting too far ahead, then let me know and we can work together on putting the essentials together for this troubleshooting.
From your screenshot, you have a Windows 7 apparently 64 bit computer, lots of RAM. That computer would be great for Premiere Elements 11 Windows.
But Premiere Elements 8 is only a 32 bit application running in the 32 bit compatibility mode of your 64 bit system. So all that RAM is excessive in a 32 bit system with its limitation of max supported installed RAM being 4 GB (of which 3 GB or less of that are available).
So, the freezing and such could be explained by limited resources depending how much you have in the project when the freezing occurs and what formats are involved - like AVCHD. The burner not being recognized by Premiere Elements is probably another matter.
Let us start here....another place where you could be getting hit on the resource side of things....
1. Background Rendering and AutoAnalzyer features in version 8 are notorious for grabbing system resources. If you have them enabled, that could account for much of the program freezing. So, please make sure they are not selected.
a. Background Rendering. In the Premiere Elements 8 workspace, go to Edit Menu/Preferences/General, and make sure there is no check mark next to Background Rendering option.
b. AutoAnalzyer. In the Premiere Elements workspace, click on the Organizer tab in the row below the selected Organize header in order to open the Elements Organizer. In the Elements Organizer workspace, go to Edit Menu/Preferences/AutoAnalyzer Options and uncheck all the option under that.
To get back to the Premiere Elements workspace from the Elements Organizer workspace, in the Elements Organizer workspace go to File Menu/Exit.
For most of us, Premiere Elements 8 was unusable without the 8.0.1 Update. Did you install that? Have you ever worked successfully with your Premiere Elements 8 on the computer where it is now? And, was that with or without the 8.0.1 Update?
Let us stop here and see how we are doing.
Lots of other factors to get into including the burner recognition one.
Thanks for looking at the troubleshooting comments.
ATR

Itunes has detected a problem with your audio configuration Audio/Video playback may not operate properly

I cant copy the music from itune library to iphone. Message "itunes has detected a problem with your audio configuration Audio/Video playback may not operate properly" I unistalled the itune from the pc and download the itune again but still same message come up.

I'm having the same problem. I have downloaded Itunes again but still the same problem.

Itunes has detected a problem with your audio configuration. audio video playback

itunes has detected a problem with your audio configuration. audio video playback may not operate properly. Why do i get this after update cant get sound now please help!

See if this article will help:
iTunes for Windows plays video files without any audio
http://support.apple.com/kb/TS1696

Problem with multi-mapping

Hello everybody,
we got a problem with multi-mapping.
Source and target message-type are the same:
<xsd:element name="MY_MESSAGE_TYPE">
_<xsd:element name="BUSTRANS">
__<xsd:element name="CHILD_1" maxOccurs="unbounded">
___<xsd:element name="SUB_CHILD_1" maxOccurs="unbounded">
____<xsd:element name="SUB_CHILD_1_NAME" type="xsd:string">
__<xsd:element name="CHILD_2" maxOccurs="unbounded">
___<xsd:element name="SUB_CHILD_2" maxOccurs="unbounded">
____<xsd:element name="SUB_CHILD_2_NAME" type="xsd:string">
The requirements are:
<xsd:element name="MY_MESSAGE_TYPE"> should be created as often as <xsd:element name="CHILD_2"..> occurs
a) so we mapped
CHILD_2 -> MY_MESSAGE_TYPE
BUSTRANS -> CopyValue -> BUSTRANS
CHILD_1 -> CopyValue -> CHILD_1
SUB_CHILD_1 -> CopyValue -> SUB_CHILD_1
SUB_CHILD_1_NAME -> CopyValue -> SUB_CHILD_1_NAME
CHILD_2 -> splitByValue(eachValue) -> CHILD_2
The problem is:
If we duplicated
a) SUB_CHILD_1
b) subtree CHILD_2 (so 2 messages will be generated)
for testing, SUB_CHILD_1 only occurs 1 time! But we need it in every target message as often as it occurs in the source message.
For your testing, here is the datatype:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://enbw.com/XI/SAPCRMB2B/javamappings_test" targetNamespace="http://mynamespace.com/XI/SAPCRMB2B/javamappings_test">
<xsd:complexType name="MultipleBookingOrderRequest">
<xsd:sequence>
<xsd:element name="BUSTRANS">
 <xsd:complexType>
 <xsd:sequence>
 <xsd:element name="CHILD_1" maxOccurs="unbounded">
 <xsd:complexType>
 <xsd:sequence>
 <xsd:element name="SUB_CHILD_1" maxOccurs="unbounded">
 <xsd:complexType>
 <xsd:sequence>
 <xsd:element name="SUB_CHILD_1_NAME" type="xsd:string">
 </xsd:element>
 </xsd:sequence>
 </xsd:complexType>
 </xsd:element>
 </xsd:sequence>
 </xsd:complexType>
 </xsd:element>
 <xsd:element name="CHILD_2" maxOccurs="unbounded">
 <xsd:complexType>
 <xsd:sequence>
 <xsd:element name="SUB_CHILD_2" maxOccurs="unbounded">
 <xsd:complexType>
 <xsd:sequence>
 <xsd:element name="SUB_CHILD_2_NAME" type="xsd:string">
 </xsd:element>
 </xsd:sequence>
 </xsd:complexType>
 </xsd:element>
 </xsd:sequence>
 </xsd:complexType>
 </xsd:element>
 </xsd:sequence>
 </xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
Regards
Dominic

Mario,
multimapping (split IDOC into several IDocs) is possible with IDocs. We did it!
Did you use IDOC packaging for this?
AFAIK,when you use multimapping that involves different adapters including one J2EE adapter and a IDOC adapter in the inbound side, multi mapping does not work.
Regards,
Bhavesh

Problem with multi row delete

Hi, I'm new in apex and I tried to build master detail report on some view. Everything is cool but "delete checked" doesn't work.
"ORA-20001: Error in multi row delete operation: row= , ORA-06502: PL/SQL: numeric or value error: NULL index table key value,"
the problem is that I don't know what is wrong :), I have a special trigger "instead of delete on MY_VIEW", but in this error problem is not explained.
Anybody knows what can be wrong? It is probably a problem with trigger or multi row doesn't work with views? I couldn't find how MRD knows what kind of statement use to delete rows so I don't know if the statement that program used is correct. In debug it lokks that:
0.32: ...Do not run process "ApplyMRU", process point=AFTER_SUBMIT, condition type=REQUEST_IN_CONDITION, when button pressed=
0.32: ...Process "ApplyMRD": MULTI_ROW_DELETE (AFTER_SUBMIT) #OWNER#:MY_VIEW:ITEM1:ITEM2
0.33: Show ERROR page...
0.33: Performing rollback...
thanks for any help
//sorry for english mistakes
edit: it doesn't matter if I use in trigger delete from ... where item1=:OLD.item1 ; or if I use item1=:P4_item1 (which actually saves correct values)
Edited by: user5931224 on 2009-06-13 08:55

I realised that this is not a problem with trigger, I changed trigger to "NULL;" and problem is the same. Maybe sb used master detail on view not only on tables and know what can be wrong in this situation?

A problem with a Materialized View

Hi,
I have a ordinary table with a three column compound primary key (COL_Id, COL_ValidFrom, COL_CaseId)
I also have a MV that selects from that table. This one compiles just fine. It looks like this:
CREATE MATERIALIZED VIEW "MV_02"
REFRESH FORCE ON COMMIT
AS SELECT COL_Id, COL_ValidFrom, MAX(COL_CaseId) CaseId FROM TBL_MediaText GROUP BY COL_Id, COL_ValidFrom;
Works fine. Now I'm trying to create a second MV that selects from the first MV. It looks like this:
CREATE MATERIALIZED VIEW "MV_03"
REFRESH FORCE ON COMMIT
AS
SELECT a.COL_Id, a.CaseId, a.COL_ValidFrom, NVL(MIN(b.COL_ValidFrom)-1, TO_DATE('2099-12-31','yyyy-mm-dd')) ValidTo
FROM MV_02 a, MV_02 b
WHERE a.COL_Id=b.COL_Id(+) AND a.COL_ValidFrom < b.COL_ValidFrom(+)
GROUP BY a.COL_Id, a.CaseId, a.COL_ValidFrom;
This one does not parse. (ORA-12054) There seem to be a probelem with the ON COMMIT command. I have searched the web and found some info on the subject. It tells me to create a MV log, wich I have. I've also tried to put count(*) and count(b.COL_validfrom). But it just wont work.
I see a possibilty of yhe problem laying in te fact that I join using two parts of my PK. Also there might be a problem with the fact that i can't create a log for MV_02 WITH PRIMARY KEY. Or maybe you can't have a MV selecting from another MV?
Do anyone know how i should specify my Logs and/or querys in order for this to parse?
I'm using 10.1, and I do have the ON REFRESH COMMIT-privilege.
Thanks!
Message was edited by:
DavidNils

May be you are trying for this....I don't know how helpful is my solution for you.
SQL> CREATE MATERIALIZED VIEW MVE
2 TABLESPACE JAM
3 REFRESH FORCE ON COMMIT
4 AS SELECT D.DEPTNO,D.DNAME, E.ENAME, E.JOB FROM
5 EMP E, DEPT D
6 WHERE D.DEPTNO = E.DEPTNO(+)
7 /
Materialized view created.
SQL> CREATE MATERIALIZED VIEW MVEF
2 TABLESPACE JAM
3 REFRESH FORCE WITH ROWID
4 AS SELECT * FROM MVE;
Materialized view created.Message was edited by:
Jameel

Problem with maintain table views SM30 Transaction

Hello All,
i have a problem with the table maintenance view SM30, it doesn't permit me to modify the rows in the table.
we have added a field into the table and when i tried to change the table view from menu: Utilities ==> table maintenance generator==> change the system propose me a message that the screen 0001 will be deleted and recreated...but the system has deleted the screen and doesn't recreate it...in somewehere on internet we find that we should use the transaction SE55 menu:
Environment==> modification ==> Maintenance screen ==> button Layout which open the tool Screen Painter and from that we have created our screen with 4 fields of our table...our result that the screen is created and i can see it from the SM30 transaction but i can't insert rows in the table...when i try to go to maintain table: menu: Utilities ==> Table maintenance generator to try if i can modify something the system give me a message: "set the compare flag dialog ZIV_DP_PLCHAR_LA"
the ZIV_DP_PLCHAR_LA is the name of my table...
can you give me some advices please how should i do to fix this problem to insert rows in table throughout the transaction
SM30 "maintain table views: initial screen"
if i want to delete the screen from the SE55 transaction to recreate it newly what should i do to take care about some options
to have a new screen?
thanks for all
Bilal

Hi
First delete the old table maintainence generator.
Now Recreate the screen and your table is good to go..
These error messages come when we add new fields and different version of the table maintainence generator in database.

Problem with multi-clip... viewing angles during playback

Similar Messages

Maybe you are looking for