Problem with Network Print Adapter (Q6275A)

Good afternoon, I hope you can help me.
A few days ago I acquired a hp print server HP (Q6275A) network to connect an HP LaserJet 1600 with USB connector.
It's a simple device according to the manual only requires a small application that serves as liaison between the PC and print server. So far so perfect, the problem comes when I install this same application on a second computer, and a third and even fourth, thereby achieving not print any of them, except .. the last installed and it seems that the application takes over the port, and the last to install the software locks the device preventing others can print. When this happens the application gives the message "Connection Manager" in the "State" is "occupied" pcname '(0.0.0.0)
Thanks for your help.

Hans,
Did you check you BIOS Settings. I Suppose you should switch the NIC on.
When starting up : Does the BIOS see your NIC?
Ben (From Holland)

Similar Messages

Adobe reader XI: doule sided print problem with network printer (windows 8 pro)

Hi, I'm facing a problem with my old printer, the xerox phaser 3160n. It was connected to my notebook through network connection, and everything works well with Adobe X /Win 7 OS (including the double side print, of course) last month, I have upgraded my NB to windows 8 with clean install
clean install my printer driver for windows 8 too, and Adobe reader XI was also downloaded through official website.
However, since I was about to use double sided print in Adobe reader XI (11.00.02) it couldn't obey the order, but just print one side as usual
I have checked the "option" of my printer, and it was correctly set to "double-sided print". I have tried word 2013 to open the same pdf, and choose the same "double-sided print" and it works perfectly.
Is this problem a bug? and would it be corrected in the next update version??
(I remeber I've saw a similar issue too, with network printer, but I couldn't find it)
Thanks!!!

Hi,
Meanwhile, after insatlling the latest driver for printer from the manufacture website, restart the spooler service as a test.
Start > Run > cmd and type "net stop spooler" after that "net start spooler" or start > run > service.msc and restart it over the GUI.
Run Printer Troubleshootor under Action Center\Troubleshooting\Programs\Printer, and check if it helps.
And yes, the manufacture should have more sence about the printer, it's recommended to contact them.
Yolanda Zhu
TechNet Community Support

Problem with network printer on Windows 7 machine

I'm running Mavericks on a Mac Mini. I have a Windows 7 machine with an attached Brother HL-5340D printer. I'm using the Brother HL-5340D CUPS driver. Whatever configuration I use, I cannot get my Mac to print from the Brother. I have even set up dhcp on the Mac and connected to the Windows machine with a cable. I have tried ipp, ldr/ldp, windows, ip, and most of the relevant options under advanced, and nothing works. I've run out of ideas on what to try and how to test and where to look for hints. All I get is the following:
Unable to connect to ‘192.168.33.2’ due to an error.
Not a lot of help.

James Wilde wrote:
1. I forgot to say that it was the Mac equivalent of dhcpd that I turned on so that the Mac is the server, on 192.168.33.1, and it has assigned the number 192.168.33.2 to the Windows box. And yes, I do prefer in these cases to use fixed addresses, but the Windows box seemed reluctant to accept its ip address thus the decision to start dhcpd on the Mac. After that I could not ping the Windows box from the Mac box. I didn't try to ping the Mac from the Windows box. I'll try that tomorrow. As to the network, there are only these two machines on the cable network. The default router on the Windows box is, if I remember correctly, set by dhcpd to the ip address of the house router. I have now disabled the cable network. See below.
Unusual that you could not ping Windows from the Mac. Would explain why you got a connection error with this setup. But if you have now stopped using the cable connection then this is mute.
James Wilde wrote:
2. The network profile is set to Home on the Windows box. I don't see any references to Homegroup in any of my messages on this topic. If you are referring to another post I made on a different subject, I am aware of the problems with Homegroup, and as far as I know, I have avoided this, since my wife's Windows box is the only Windows box in the house. Everything else is either Mac or Ubuntu, apart from one or two Windows virtual machines on my Mac and Ubuntu boxes.
No, you didn't mention Homegroup but you did mention not being able to see the Windows computer "Incidentally I now find that I can't get any result from selecting Windows in the Add Printer dialog." So I thought I would mention that Homegroup can cause this.
James Wilde wrote:
3. I've tried all three options in the Add printer dialog, IP, Windows, and Advanced. Under Advanced I have tried lpd and spoolss and ipp, under ip I have tried ipp and lpd. The share name is Brother-HL-5340D, and the hyphen between Brother and HL I put there myself to make it one 'word'.
I've just tried your suggestion and get the following when I click on Add.
Unable to verify the printer on your network.
Unable to connect to ‘192.168.1.202’ due to an error. Would you still like to create the printer?
I've seen this occur when the LPD process is not working. Open the Services pane on the PC and check the LPD service has started. If it is running and you still get the error message, what happens if you say yes to creating the printer?
James Wilde wrote:
As i said, I have disabled the cable network and am using the house wifi network (all machines with fixed IPs). I can ping the computer and have just mounted a disk on her computer with smb using Finder/Go. The mount does appear to be read only, but at least I can open all the folders.
Anything else I can try?
That is a good outcome. Proves there is a functional path between both computers.
Since you can connect using SMB, and if you cannot LPD to work, then try adding the printer again using the Windows view in the Add printer pane. You should see the workgroup used by the Win7 PC followed by the Win7 computer name. Selecting it should prompt you to authenticate (unless you have saved the account in Keychain) and then the printer share name should appear. After selecting the share, select the Generic PS driver as a test to see if you can submit a print job - open the print queue on the Win7 PC to see if the print job appears. If this does work, you can remove the printer on the Mac and add again, this time selecting the Brother driver and then see if this works.

Canon IR 3235 -- snow leopard -- problems with network printer

Hi,
since yesterday I've problems to print to the network printer [canon IR 3235-3245] -- updated to snow leopard ca. 14 days ago, then experienced printing problems, search this list for answers, then downloaded new canon drivers, re-configured the printer in system preferences, send the print command --- and got 100s of white sheets of paper instead of the 2 pages I wanted ...
what was wrong, or can anybody give me a clue to solve this?
thanks, bommelkamp

Hello and welcome to Apple Discussions.
With regards to the printing of 100's of white sheets, this could be a result of using the Canon PPDs but not having the PostScript license enabled in the iR3245.
The iR3245 series is supported by the Canon UFR2 v2.00 driver. This is the driver to download if you haven't done so already. With this driver installed, you create an IP printer using LPD as the protocol and a queue name of LP. Then in the Print Using select the "Canon iR3235/iR3245 UFR II (UK)".
Alternatively you can use Generic PCL Laser Printer for the printer model instead of the Canon UFR2 driver. This will get you printing but does not support any of the copiers finishing options.
Pahu

Communication problem with network printer

I have a Lexmark X9350 all-in-one printer. It has a built in wireless card and I am trying to print to it from my Powerbook G4. I have an airport extreme network setup in my home, and my PC is able to access the printer just fine. When I installed the printer software on the mac, it recognized the printer on the network and worked at first, but then suddenly couldn't find the printer. When I uninstalled and reinstalled the software it was very strange because when I got to the point where it searches the network for a printer, sometimes the printer shows up, and then if I click to refresh the printer sometimes disappears. It is not an issue with being out of range, because the printer display tells me it has plenty of connection, and as I said the PC can print with no problems. It appears to be something specific with Tiger not being able to consistently detect the printer.

I would look at XP's port configuration for the printer and then try and use the same protocol on the Mac. If XP is showing it as RAW Port 9100, then that is shown as HP jet Direct - Socket on the Mac. The only issue then is whether the OS X driver is available in the Lexmark list. Sometimes the provided OS X driver is only for direct USB connections, so you have to look at using an alternate driver, such as those offered by Gutenprint.

Problems with network printer in Lion Moutain 10.8.2.

When I upgraded my Mac Air 2011 to iOS 10.8.2, I couldn't printing on my Canon LBP 3500 through WIFI anymore. I can ping its IP address through Network Utility, but the answer always is Unable to verify the printer on your network when I add printer.
Please tell me why the problems come, I still can printing in previous iOS version.

Here it is :
# Canon Printer Daemon for CUPS Configuration Data
<Path>
# CUPS configuration files Path
# Default /etc/cups/
CUPS_ConfigPath /etc/cups/
# LOG Directory Path
#LogDirectoryPath /var/log/CCPD/
</Path>
# Printer entries
# Mapping each "Printer-Name" to "Printer Device Port".
# The "Printer-Name" has to be identical to the CUPS printer queue name.
# For example, if you prepare a printer named "XXXX" as a CUPS printer
# queue name, and the printer is connected to the USB port "/dev/usb/lp0",
# you can use the following three lines example just by removing the
# comment symbol "#" of each line.
#<Printer XXXX>
#DevicePath /dev/usb/lp0
#</Printer>
<Printer _10_0_0_201>
DevicePath net:10.0.0.201
</Printer>
<Printer _10_0_0_201_2>
DevicePath net:10.0.0.201
</Printer>
<Ports>
# socket port
UI_Port 59787
# backend data port
PDATA_Port 59687
</Ports>

Problem with Bulk printing of invoices using VF31.

Hi,
I tried to give bulk print of invoices using VF31, for around 200+ copies. Printing was going on but suddenly stopped after 50 copies get printed.
Situation is the same even after i retry it.
Can someone advice on the reason please.
Thanks.
Best regards,
Srikrishhna13

Issue identified and there was a problem with Network.

I have problem with wireless print HP after iOS 7 !? What can i do

I have problem with wireless print HP after iOS 7 !? What can i do?!

Tap Settings / General / Reset / Reset Network Settings if your having a problem with your network. If you have another problem go to the same place in "Reset" and just reset all settings

Photosmart 7520 error. there is a problem with the printer. turn printer off then on.

I have a photosmart 7520 experiencing the following issues.
Problem #1: Randomly all the lights start to blink off and on and the display reads the following :
Error . There is a problem with the printer. Turn printer off then on.
I cannot find any one action that triggers this to happen.
Problem #2: When the printer is turned on and idle, also at RANDOM times, the printer will "Ding" followed by the wireless light blinking. Then what sounds like the cartridges being cleaned, then a sound like the feeder spinning or the print head running full track from side to side, then ending with a "Ding" and then returning to normal.
When this occurs, the wireless connection is disconnected then reconnected. Also this Disables the "Scan to computer" function to all the computers on the network and requires manually re-enabling all .
From what I can tell the printer is restarting itself.
It is plugged directly into the wall outlet, no surge protector.
Tech support has already run me through the clean the print head steps, escalated me up the chain, and ultimately replaced the printer with a brand new one.
THE NEW PRINTER IS DOING ALL THE SAME THINGS AS THE PREVIOUS ONE.
This printer is connected wirelessly to a Netgear N900 router. My computers all running Windows 7, all are on the same network and workgroup and all are running Mcafee Total Protection.
If anyone is or has experienced the same or similar problems, I could sure use some help.
This question was solved.
View Solution.

How did you fix this?
I replaced an HP printer recently for a new Photosmart 7520 after a complete ink container emptied into the printer.
The old printer sometimes had difficulties switching it on and the new printer has the same problem.
Also the wireless connection regulary drops and can only be reenabled by switching of the printer and switching it back on, only this sometimes takes more than ten minutes before a simple push on the power button is translated in a power on of the printer.
Since the previous printer also suffered from these "power" issues, I think the problems are power related, but I have to check this first before I can say anything more about this.

CUPS problems with PDF printing

I am having all manner of problems with PDF printing. Recently added a Lexmark MX710 and have 7 machines that were previously printing fine to an X652de a T652 as well as a Samsung CLP770. All network printers.
Now there are bizarre issues with PDF printing. CUPS version 1.6.1. The MX710 will blue screen and reboot when printing one specific pdf without fail. There are all kinds of random nonsensical results when printing from different locations. A pdf that stalls the X and T652 with "filter error" will print from my own machine to the same printer, using the same versions of cups, .ppd file, and everything package related to cups.
Yet other PDF files will print, while some print complete gibberish, I can't find any rhyme or reason or anything predictable about any of it other than to say printing postscript files works fine all around.
This has been universally in KDE printing through Okular.
I've tried some things I've found suggested, such as modifying the mime.conv as suggested by an old ubuntu thread, adding the a2ps package, all to zero effect.
Last edited by TheWretched (2012-12-08 00:27:41)

At this point the only reasonable explanation I can think of is that the ppd package I downloaded and installed via included shell script from lexmark for the mx710 caused this whole catastrophe. The only common thread for this problem starting was that I used this on all of the affected machines and they now all manifest problems. And on four of these machines this is literally all that was done, they were loaded in september, have not been updated via pacman in any way, and are running the exact same version of cups poppler, and okular that they were then, which was working, and now cannot print pdf to any printer at all without causing one of several problems depending on the printer.
I cannot seem to get this reversed though. I've gone so far as to force remove all the cups packages, and delete the files associated with the install script, but the problem remains afterward. From what I can see so far all this lexmark package did was display a license agreement, then copy the ppd files in it's folder to /usr/share/ppd/Lexmark. This particular printer, the mx710 has no .ppd available that I have found other than this one from Lexmark directly. Open printing doesn't have anything for this model.
This printer's driver has some kind of a cups filter driver with it that the install script presumably installs, I suspect this could be what caused the problem specifically, but I must not be removing it correctly, despite following the file removal suggestions in the Lexmark readme for uninstallation. CUPS printing is something I am new to and only have a basic understanding of.
To answer some specific questions I nearly forgot, I don't have cups pdf installed. I have chrome installed which can successfully save pages to PDF, previously it could also print pdf, and presumably it prints everything as pdf given the cups pdf workflow. That is also broken now too, so printing from the browser causes the printer to fail as well. If I save as pdf from chrome, and print with adobe reader, it works.
Last edited by TheWretched (2012-12-11 14:25:40)

Trying to setup a network printer adapter on my router

How do I get the necessary info to utilize a network printer adapter on the verizon router? I am using a mac and need to find the router's ip address assigned to the network adapter?

#1 First follow the hardware install directions for your printer
Go get the manual / user's guide as need be from http://www.iogear.com/support/dm/manual/GPSU21?PHPSESSID=9d86d314cc11ac48fcece1051d6ad3a8
#2 On your Mac, Click the Apple icon in the upper left hand corner of your screen. Then click the System Prefreneces.. option.
#3 In the Internet & Network section click the Network icon.
#4 Select the network connection you use to connect to the internet. It will be the one that has a green dot in front of it. The green dot means the connection is active. Then click the Configure button which is close to the bottom of the screen.
#5 With your web browser go to the Router IP Address, and log-in as need be.
#6 In there, there should be the LAN IP Address of the printer.
#7 Follow the Software Installion - Mac, from the printer's manual / user guide.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

ENVY 7640 error "There is a problem with this printer"

Hi guys. I got this printer 4 months ago and it has been working marvelous. But this weekend when I turned it on the error "There is a problem with this printer" appeared, just after it connected to my wifi network.I made several tests and the error comes only if the network is connected to the internet.When it is not connected to the internet the printer works fine (prints, scans, all via wifi).I have a MAC and an AirPort Time Capsule.Is there any set up that solves the problem?

Hi , Welcome to the HP Forums! I see that you are getting the error message, "There is a problem with this printer," with your HP Envy 7640 on Mac OS X 10.10. I am happy to help! Is this error message showing on the printer's display screen, or on the computer screen? If the error is on the computer screen, try resetting the print system. If the error is on the printer's display screen, please try a hard reset, by going to this post, How to perform a Hard Reset, by . It is important that the printer's power cable is plugged directly into the wall outlet, and not a surge protector. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well. I would also double-check that your printer's firmware is up-to-date. Getting the Latest Firmware and Product Updates. Hope this helps! “Please click the Thumbs up icon below to thank me for responding.”

Problem with HP Printer Utility and Mac OSX 10.5.4

I have a problem with HP printer Utility. When a standard user adds a new paper profile HP Printer Utility asks to type an administrator's name and password to allow HP printer Utility to make changes. Is it possible to avoid this? Otherwise I have to give admin rights to every user because they have to be able to add new papers. HP printer Utility sharing and permisssions are set to read and write to everyone.
HP designjet Z3200
MacOSX 10.5.4 (Mac pro intel)
HP printer utility 3.6.0.

Just found an email HP Support sent to me back in January 2008, about this issue
"Hello Hunter,
Thank you for contacting HP Total Care.
There currently is not proper driver for 10.5, so it is surprising that the printer is printing correctly on your Mac from any application.
Your issue cannot be resolved until the 10.5 driver is developed and released.
To sign up for an update as soon as it is available ...click on the link below:
HP's subscriber's choice is a free service where you can select to receive timely email notifications ranging from software and driver updates to creative ways to do more with your HP products.
http://h71036.www7.hp.com/hho/html/3618-0-0-225-121.html
If you need further assistance, please reply to this message and we will be happy to assist you further.
You may receive an e-mail survey regarding your e-mail support experience. We would appreciate your feedback.
For information on keeping your HP and Compaq products up and running, please visit our Web site
at:
http://www.hp.com/go/totalcare
Sincerely,
Dave
HP Total Care"
I just sent them an email today on any updates regarding a release date on the Leopard driver for P1005, i'll post any info i receive.

Problem with network on Iphone 4

Please tell me if someone has a problem with network on Iphone 4?

Of course other people have had problems. However, just knowing that other people have had some vague, undefined "network problems" most likely isn't going to be very useful. You'll get more and better help if you can give some details about your specific problem. Include who your carrier is, what country you're in. Then describe the exact nature of the problem. Then, maybe someone will be able to give good suggestions.
And, by the way, the free bumper program ended some time ago. It also was only a "solution" for one of many possible problems.
Best of luck.

T.code FBL5N: a problem with the print of the output list

Hi All,
with reference to the t.code FBL5N, I have a problem with the print of the output list of the report.
When I execute the print, I obtain one customer for each page printed.
I wonder if is possible to obtain more customers for each page printed.
Could anyone help me?
Thanks
Gandalf
Edited by: Umberto Gandalf on Dec 21, 2008 10:36 PM

Hi,
Though personally i havent tried this option, check the same
Go to Menu: Settings >> Switch List
This will make the value displayed in ALV format and then try taking print outs.
Regards,
Sridevi

Problem with Network Print Adapter (Q6275A)

Similar Messages

Maybe you are looking for