Problem with uploading assets

Hi,
I am following this tutorial: http://www.adobe.com/devnet/flash/articles/augmented_reality.html#ach-setscr for augmented reality. The Sample files have been downloaded and when I open the .fla and run it in flash CS5 it works beautifully with the marker.
However, I am trying to get it to work online or in a powerpoint presentation. When I do so, the user is prompted to enable the camera, but the 3D image doesn't appear.
As far as I can see, I have to upload a .swf to a html page. The .swf is from a .fla and a .as (the actionscript is all in the .as which targets the .fla).
When the .swf is run, it calls on a .dae file which is referenced in the .as file.
Locally, when the .swf is run, it prompts the user to allow the webcam to be enabled. The user holds a marker image to the webcam and an augmented reality 3d model is shown. This works in flash cs5, but when I try to upload it to html or insert it in a powerpoint page I get the following error:
Quote:
Error #2044: Unhandled ioError:. text=Error #2032: Stream Error. URL: xxxxx /assets/models/tower/models/tower.dae
(xxxx is either the document path on my desktop or h ttp://mysite.com if online)
After googling, it seems that I have to somehow preload the flash assets but can't find how this is done.
Basically what I am trying to do is to get an Augmented reality application up and running on a website and I'm trying to do this with the version available here: htt p://ww w.adobe.com/devnet/flash/articles/augmented_reality.html.
If you look at the comments below the tutorial, this one from
Srivello appears in answer to other posters who had the same issue (the model works locally but not online)
Quote:
RE: Yefolio & MediocreNinjaStudios
Ensure that the *.dae file is uploaded too and the URL used in the AS3 is correct. If you are sure of this, perhaps the model must be preloaded. Load, wait for it to be 100% loaded, and then continue the code execution. How to preload Flash assets can be found online and is outside the scope of this article.
Needless to say, I can't find how to preload them. I get results for preloaders, but this doesn't seem to fit the problem.
When I published the html & swf, I tried to upload them and got these messages:
Please could someone shed some light on this.
Thanks

http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_19105
The above link is no longer valid, but someone said that it solved their problem as they had a similar error (from this page http://objectmix.com/macromedia-dreamweaver/737103-errors-load.html).
Is there any way to find the article/solution?

Similar Messages

Problem with uploading a file in Clustered Environment

Hi,
I have a problem with uploading a file in a clustered environment. I have an iview component which facilitates an upload action of an xml config file. The problem is that the upload of the modified XML file is reflected only in the central instance of the cluster and not in the dialog instances. The dialog instances hold the old config file.
Is there any solution to upload the file to all the nodes in the cluster.
Thanks
Kiran

Hi,
This is a known problem with clustered environment. Remember that your portal component runs on just on dialog instance and it doesn't automatically have access to the other nodes. However, there are some ways to get around this
1. Use KM to store files. KM is a common repository for all application servers and therefore you needn't worry more
2. Use an external batch oriented product (suresync/robocopy) to synch folders on the different DIs. You basically use your existing portal component, but there is a batch job which makes sure the upload folder is identical on all DIs (however, there is a slight delay depending on how often you run the batch job)
3. Store the files on a shared disk directly from the portal component.
Cheers
Dagfinn

Hi, I have problem with accesing Assets - Fonts (Synced Typekit fonts)!

Hi, I have problem with accesing Assets -> Fonts (Synced Typekit fonts)!
Can You help me with that problem?

Hi Tarik,
I'm sorry you ran into trouble here. There are a few things we can check right away to start debugging this:
- First, would you try signing out of the Creative Cloud app and see if this solves the issue? This can be found under: Gear > Preferences > General > Account.
- Could you try quitting/restarting the Creative Cloud app. Did this solve the issue?
- Could you try Turning File and Font Sync off under: Gear > Preferences > Fonts. Wait a second, then turn it back on. See if the font/s show up and if not, try syncing again. Did this solve it?
- Could you tell me if you're on the Windows/Mac OS X and the version?
If none of those worked, would you attach the CoreSync files and send those to our support email: [email protected]?
On the Mac, the folder can be found here:
/Library/Application Support/Adobe/CoreSync/CoreSync-yyyy-mm-dd.log
(You'll want to open the Finder, click Go, in the menu, hold down the "option" key and you'll see the Library folder.)
On Windows:
You can find the files under: C:\Users\user name\AppData\Roaming\Adobe\CoreSync\coreSync-2013-08-xx.log
I know this is a lot. Thanks for your help here.
Cheers,
Benjamin

I have problems with uploading images to my printing company have the images have been manipulated through CS6 i have saved images as jpeg but the printer company tell me they are not j peg, they will not upload images save from a camera are fine

I have problems with uploading images to my internet printing company when the images have been manipulated through CS6 and i have saved images as jpeg the printer company tell me they are not j peg,
but images saved from my phone or camera images that have not been manipulated upload fine, What am i doing wrong?

Save/Export them as JPG. Photoshop defaults to PSD, so make sure you select JPG and not just rename the file to .jpg.
There are two ways to save them as JPG: Regular Save as option or Save for Web & Devices
Take your pick.

Still problems with uploading articles in folio builder

Hello,
Read much information on this forum but i still don't have a solution for my problem. And here is my problem.
I had a course how to create a digital publication. So went back to work and try to do the same as what i did at the course.
Installed InDesign CS5.5 and the last folio producer tools en folio panel. Than I create a folio via the folio panel en voila it was created. So far so good.
Than I try to add an article to this newly created folio but for some reason I can't get it in the folio and I got this message
An error has occured while updating article layouts.The InDesign file for the layout cannot be found. (Than in Dutch because I have a Dutch version)
So what I already tried is the following:
- use another Adobe-ID to log in the folio panel (no succes)
- uninstalled the publishing parts en reinstalled again the newest parts (no succes)
- create article via import (also no succes)
- create a local folio and than add a article (no succes)
- Also locate the InDesign file on another location (no succes)
When i create the article the spinner keeps on turning. When I than login to the digitalpublishing.adobe.com with the same adobe-id I see the article with a red frame around it. Which says "Corrupt layout"
Than I send the InDesign file of an article to someone else and he can upload this file without any problems. And I am sure I have all rights/permissions which I should have.
Is it possible that you can have problems with uploading articles because of network settings or combinations with other software?
Has somebody a solution for this really frustrating problem?

Hi pbremmer!
Are you using Mac och PC?
/Henrik

Adobe Send - Problem with uploading files. When is this going to get fixed?

When is the Adobe Send problem with uploading files going to get fixed. Similar to others - I have tried and tried to make Adobe Send work and get an error. I have tried to upload the file and it looks like it uploads and then - it is nowhere to be found.
I then go to Adobe Send Now and it works fine.

The problem is the same as described in other similar threads.
I have a 57 MB PowerPoint file I am trying to send using Adobe Send. I go through the normal steps to identify the file and select recipients and then send the file. After the file completes the upload - an error saying there was a problem comes up and the file is not uploaded.
I have tried to upload the file to the site with similar results - error and the file doesn't go.
I can go to the old SendNow site and it works flawlessly.
If I need to get screenshots - let me know. There are several other threads describing this same problem. It isn't something new or not heard of before.
Sent from my iPod

Problems with Uploading photos in PSE 7

I've had nothing but problems with PSE 7. It is pretty slow and crashes once every half hour or so. I tried loading 8 but after it crashed numerous times and wiped out some previous work I took it off. I bear with the poor functionality of PSE7 but now I can't upload any albums to PS.com. I've uploaded over 16,000 pics and numerous albums before with no issues but now it's locked me out. I've checked and done ALL the obvious things but I'm missing something. I have over 60G of space left so no space issues. I know it must be something that I'm doing. Is there as easy way to get help ... someone to speak to maybe as this is really frustrating. I want to work with this program but it is way too difficult for me ... and I've taking classes to help.
Any thoughts or help would be greatly appreciated. Dan D

Mark ... Thank you so much for replying. Interestingly enough 3 of the 4 albums that I was trying to upload ... went through last night. That was almost 10 days after I created them and loaded the album onto my organizer. As for a few details ... here they are;
     ... each of the four albums were anywhere 30 to 57 photos @ about 4-6 MB each photo
     ... they were created around 10 days ago
     ... each time I created an album I made sure that I went through the process in its entirety as sometimes the organizer CUTS you off midstream (then the result is NO upload)
     ... when they didn't upload I tried reloading (a few times) them onto PS.com by recreating them.
     ... last night 3 of the albums went through and uploaded BUT ...
          ... album #1 was repeated twice
          ... album #2 was uploaded only once
          ... album #3 was repeated 3 times (once with a different name as I tried changing the name once to "solve my problem"
          ... album # 4 didn't upload
     ... I have an 100G account and have used about 24G of space
I have just tried to upload the 4th album.
I appreciate your help. I am convinced that it is a server issue with PS.com as I've done this 31 times before. If you have any thoughts whatsoever I'd appreciate them very much.
My albums are at ...   www.photoshop.com/user/dimaggio   The first 6 you see are the albums in question ... unless my forth album downloads.
Thanks again,   Dan

Problems with uploading photos to Facebook - Photoshop elements 9

Yesterday I was able to upload photos to Facebook with no problems, but today I just keep getting a message to say I can't upload. I get a message saying "there is a problem with your internet connection. Please check that the firewall is not blocking Elements organiser or that you have an internet connection". The firewall is not blocking it and I do have an internet connection, I can upload to Flickr, and I attach to email's as attachments, but I cannot upload to Facebook.
It was fine yesterday and I can't work out why it isn't working today - nothing has changed at my end - is anyone else experiencing the same problem and does anyone know how to fix it?

Three posts down - http://forums.adobe.com/thread/911836?tstart=0

Problems with Upload record to Infotype 2010 together with Cost Assignment (PREF)

Hi
I create program using your guide
http://scn.sap.com/people/aditya.palekar/blog/2010/01/19/uploading-a-pa-infotype-record-with-cost-assignment
but I have two problems:
If I call method "CALL METHOD ref2->modify_data" is obligatory parameter SECONDARY_RECORD, but I update only infotype 2010 as PRIMARY_RECORD and PREF (I don't have secondary record).
When for secondary_record use same record as primary_record, give me an error. When for secondary_record use null record give me a error.
I try used "ref2->MODIFY_PRIMARY_RECORD" and "ref2->MODIFY_PREF" together, but using method "CALL METHOD g_masterdata_bl->INSERT" updated only last record (in this case is PREF because is call as last method"ref2->MODIFY_PREF")
What InfoType is Secondary_Record for InfoType 2010?
I have problem with NO COMMIT data. Method "CALL METHOD g_masterdata_bl->flush" have a parameter no_commit with two possible options. When I use no_commit = 'X', this commit data even if this do don't commit.
Why still commit data? When this method no_commit data?
Thank you

Hi
I create program using your guide
http://scn.sap.com/people/aditya.palekar/blog/2010/01/19/uploading-a-pa-infotype-record-with-cost-assignment
but I have two problems:
If I call method "CALL METHOD ref2->modify_data" is obligatory parameter SECONDARY_RECORD, but I update only infotype 2010 as PRIMARY_RECORD and PREF (I don't have secondary record).
When for secondary_record use same record as primary_record, give me an error. When for secondary_record use null record give me a error.
I try used "ref2->MODIFY_PRIMARY_RECORD" and "ref2->MODIFY_PREF" together, but using method "CALL METHOD g_masterdata_bl->INSERT" updated only last record (in this case is PREF because is call as last method"ref2->MODIFY_PREF")
What InfoType is Secondary_Record for InfoType 2010?
I have problem with NO COMMIT data. Method "CALL METHOD g_masterdata_bl->flush" have a parameter no_commit with two possible options. When I use no_commit = 'X', this commit data even if this do don't commit.
Why still commit data? When this method no_commit data?
Thank you

Problem with uploading

My Keynotes's, Pages's and Number's files don't upload to icloud automaticaly? What should i do?

Hi, I noticed the same problem with my iPad 2 with iOS 5.5.1.
iWork for ios was working fine with iCloud but suddenly stop working. It shows the up arrow but never syncs these documents nor other documents I create on my Mac. iPhone and Mac are working fine.
I've tried turning iCloud on and off in both iWork settings and ICloud settings, deleting all iWork documents from iPad, deleting iCloud account from iPad, an iPad factory reset and backup restore but the problem never solved. Yesterday my iPad freezed, after rebooting it iWork resumed sync with iCloud but only temporaly, few hours later the problem returned.
Everything is setup exactly the same as my iPhone that is working just fine.
Does anyone know how to solve this?
Please help.

Problem with uploading files with DMR (rights management) included in them to a Zen Visio

Hi,
I though I had got this fixed but nope still having problems so hope you clever people can help me out.
I have the ZVM and it is great, I have been able to transfer movies, CD's, photos all with no problem with a music track taking approx 2-3 seconds. However when using music files with DMR (those from HMV's music rental - this is the reason I bought the player) have big problems in transferring. I have been in touch with the tech guys at HMV and they took me through a firmware upg, re-installation of the Creative software updating the licenses in the music files and then lastly a format. Just after the format it looked as if everything was working fine however things started to slow down and now I am struggling to get tracks over. Again this is only those with DMR and all normal files (music, video, photo) go on fine. I only have 4Gb used so I can't see it is down to that.
Are there any other things I can look at doing or is the player useless for the reason I bought it's
Thanks,
Mark

Thanks Jason that seems to have helped a bit. I can now transfer using the Creative M Series Media Explorer software but not with Windows Media Player. Also when I try to use the Creative Sync Manager it is crashing out every time. My concern is that without the latter working how will I easily get the files on the ZVM updated so that the DRM does not stop the files playing (also I would just like everything working properly!!). Any further suggestions?

QuickTime 7.2 - problems with QuickTime Asset Xtra?

Ever since this new version of QuickTime 7.2 was released,
some of our customers are having a problem with viewing QT videos
inside of the Director Projector. (I am not able to reproduce the
same error, but I have received about 10 emails in the the past 2
days). Here's the type of error they are getting when attempting to
view the video, and then the application crashes:
AppName: start_here.exe AppVer: 1.0.0.0 ModName:
quicktime.qts
ModVer: 7.2.0.240 Offset: 008469a6
Has anyone come across this? Any ideas on what could be
wrong?
Thanks in advance for any help!

Now got it to work with latest version of VLC, it reports that the video codec is MJPG and the audio is ARAW. Another problems is that if I view in finder with preview on or (even get info), finder crashes or at least closes window I had open.

Problem with upload data from CRM to BI system

When I try to perform full upload data from CRM to BI system with data source 0BPARTNER_ATTR (active version: Excutable). I waited for a long time but there are not any records were transfered (total records need to upload are 130) . I checked the log and can't find any errors.
Pls help me solve this problem.
Thanks and regard

Hi,
on the next day, the process finished with status not success.
The detail errors is:
Extraction(messages): Missing messages
          Missing message: Request received
          Missing message: Number of sent records
          Missing message: Selection completed
Transfer (IDocs and TRFC): Errors occurred
          Data package 1: arrived in BW; Processing: Selected number does not agree with transferred n
          Request IDoc: Application document posted
          Info IDoc 2: sent, not arrived; Data passed to port OK
          Info IDoc 1: sent, not arrived; Data passed to port OK
          Info IDoc 3: sent, not arrived; Data passed to port OK
          Info IDoc 4: sent, not arrived; Data passed to port OK
However, the data has been uploaded to infoobject. Pls explain to me about this error and why the data can be uploaded with this error.
Regard

Since upgrading to Firefox 4 every time I open or refresh a page everything freezes and I have to wait a minute or so for it to respond again. I'm also having problems with uploading to Photobucket and watching things via Youtube since the upgrade.

Since upgrading to Firefox 4.0 a couple of days ago, every time I open or reload a page the whole browser freezes. At first I thought it might be down to compatibilty issues with other programmes open at the time, but as the problem has persisted when those programmes aren't open I'm starting to think it's the browser itself and it's getting extremely frustrating having everything freeze every time I want to change a page.
My other problem is twofold: with Youtube nothing plays at all because the toolbar with the play/pause option simply isn't there and I am unable to access the upload function on Photobucket because likewise it won't appear. I'm assuming this has something to do with Flash but have no idea how to fix it.
I've tried

hello, often such issues are caused by a firewall/security software which doesn't recognize & therefore blocks new firefox versions. please remove all program rules for firefox from your firewall and let it detect the new version of the browser again.
[[Fix problems connecting to websites after updating Firefox]]

Problem with uploading files to SharePoint 2013 in cloud using web services. Keep getting error message and don't know why.

Hello everyone. I am having trouble writing a utility that uses SharePoint web services to upload a file and metatag it. It keeps throwing the following error message:
"The request failed with the error message: -- <html><head><title>Object moved</title></head><body> <h2>Object moved to <a href="/_forms/default.aspx?ReturnUrl=%2fsites%2fgk%2f_vti_bin%2fcopy.asmx">here</a>.</h2>
</body></html> --."
Not sure why. I pass the file that I am going to upload to the subroutine and it is suppose to upload it to the appropriate library. I have burned several days on this problem and I am not sure what is going on. I would appreciate anyone that can point me in
the right direction. Below is the subroutine that I have that is causing the problem. Obviously, I have stripped the name from the example.
Thanks
Mike
******** <Begin snip of code> **********************
Public Shared Sub CreateNewDocumentWithCopyService(ByVal fileName As String)
Dim c As New copyservice.Copy
c.PreAuthenticate = True
c.Credentials = New System.Net.NetworkCredential("[email protected]", "mypassword")
c.Url = "https://x.sharepoint.com/sites/gk/_vti_bin/copy.asmx"
Dim myBinary As Byte() = System.IO.File.ReadAllBytes(fileName)
Dim destination As String = "https://x.sharepoint.com/sites/gk/Gatekeeper%20Reference/" & System.IO.Path.GetFileName(fileName)
Dim destinationUrl As String() = {destination}
Dim info1 As New copyservice.FieldInformation
info1.DisplayName = "Title"
info1.InternalName = "Title"
info1.Type = copyservice.FieldType.Text
info1.Value = "new title"
Dim info2 As New copyservice.FieldInformation
info2.DisplayName = "Modified By"
info2.InternalName = "Editor"
info2.Type = copyservice.FieldType.User
info2.Value = "-1;#servername\\testmoss"
Dim info As copyservice.FieldInformation() = {info1, info2}
Dim resultTest As New copyservice.CopyResult
Dim result As copyservice.CopyResult() = {resultTest}
Try
' When creating new content use the same URL in the SourceURI as in the Destination URL argument
c.CopyIntoItems(destination, destinationUrl, info, myBinary, result)
Catch ex As Exception
MsgBox(ex.Message)
End Try
End Sub
******** <End snip of code> **********************

Hi,
If you want to upload a file to a library in SharePoint 2013 online, I suggest you use Client Object Model or REST API.
The code snippets in the two threads below will be helpful:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/deac7cb7-c677-47b0-acdc-c56b32dfaac8/uploading-bigger-files-using-csom
http://stackoverflow.com/questions/17057074/how-to-download-upload-files-from-to-sharepoint-2013-using-csom
Uploading Files Using the REST API
http://blogs.msdn.com/b/uksharepoint/archive/2013/04/20/uploading-files-using-the-rest-api-and-client-side-techniques.aspx
You can handle the authentication with
SharePointOnlineCredentials object:
http://www.vrdmn.com/2013/01/authenticating-net-client-object-model.html
Best regards
Patrick Liang
TechNet Community Support

Problem with uploading assets

Similar Messages

Maybe you are looking for