Problem with word 2013 since I tried to share a page through mail

I have window 8 Microsoft 2013
I have tried to send a Word doc using share and mail it, it went through but since this time, I can't close Word and I got this message:
You cannot close until the Send Mail command is finished Switch to the New Message first and either send or close the message. The message went fine and my outlook and cox mail have no mail waiting to be sent.
My outlook works fine it doesn't show any mail in outbox.
I have also this message that I have a e-mail window open? I do not know where to find it and how to close it. I have 2 e-mail account one with Cox.net and the other gmail.com I use either cox or outlook to read and send e-mail.
I hope that you'll be able to see why I can't close Word program.
Thanks a lot,
Christine

Hi,
Do you mean the email was sent out successfully but the problem is Word cannot be closed? Can you see the sent mail in the Sent Items folder?
Does this issue happen to all Word documents? If we end the Word from task manager, and then do it again, can you reproduce this issue?
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

Problem with Word 2013 through VPN

Hello,
From several weeks my company has a problem
with Word 2013 when laptop is connected to the network
via VPN.
Symptoms:
- Word 2013 is opening very slow (even
opening a blank card)
- there are no matter if I try to open blank page or network files
- All other Office 2013 components are working fine (Excel, Powerpoint etc).
- When I disconnect from a VPN, Word is opening properly.
It is not a problem with VPN because:
- Word is opening locally (not network files)
- before we had Word 2010 and it was working smoothly
Does anyone know a similar case
and could help solve this problem?
Regards,
Pawel

Hi,
"- before we had Word 2010 and it was working smoothly" -
Word 2013 might deal with documents in different ways.
Since Word will open properly when you disconnect from a VPN, you might want to start by analyzing the network traffic, VPN connections.
Please try to check the option "Copy remotely stored files onto your computer and update the remote file when saving" in
FILE>Options>Advanced>Save section, and then verify result.
The other thing to check is add-ins. I'd suggest you to start Word in safe mode and see if issue persists:
Press Win + R and type "winword /safe" in the blank box, then press Enter.
Thanks,
Ethan Hua CHN
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How to center Text Box on Web Page? -- Web dev with Word 2013

I'm trying to assist a user who wants to use Word 2013 for simple web page development.
There are many tools but they want to use Word 2013.
Actually have it working by saving the Word 2013 files as web pages... like index.htm, about.htm, etc.
The problem is when we use the "Insert" tab in Word to create a "Text Box" or a "Shape" ...
And align it centered on the page... it looks fine in Word but when we open it with a web browser the "Text Box" or "shape" are no longeer centered.
We thought we had it fixed by making the "Text Box" Layout Options "In Line with Text" but again... looks fine in Word but not in a web browser.
The question: How can we get a "Text Box" in Word 2013 to appear centered on a web page?
thanks for any help.

Hi:
For webpage design, I would suggest customized form under develop tab on the Ribbon over insert object directly. I tested from my side, using customized form will lock the object position on the
page.

Problem with Courier font since upgrading to Office 2007

Hi everybody,
Since we upgraded to Office 2007, one of our Acrobat users (he is the only person in the firm really using Acrobat actually) has problems when exporting Word documents to PDF.
So he is using Word 2007 and Acrobat Pro 9 (included in the CS4), he is modifying documents that were created with earlier versions of Word and the problem he has is since he has upgraded to Office 2007 (he was already using Acrobat Pro 9 without problem with Word 2003), text in the Courier font is replaced by those rectangles like unknown characters :
So I would like to know what has changed in Word 2007 that makes it that the Courier font cannot be exported to a PDF (from what I read it is one of the standard fonts always included in PDF readers), if I can change some settings to fix it without modifying all the Word documents or at least get a warning when it is going to happen.
Indeed the user's biggest concern is that he doesn't even receive a warning that that specific font won't be output correctly so he might change only some text or images in the Word document and export it to PDF and he will still have to check the whole document to make sure there was no Courier text that didn't make it through.
P.S. He is using the Adobe PDF printer to do the export.
Thanks.
Jonathan V.

Actually, I have a bit more information to share :
In the PDF files created before upgrading to Office 2007 (with Word 2003), I can see that Courier - Type 1 - ANSI is partially embedded (I thought it was supposed to be one of the base/system fonts).
I tried to export one of the Word documents affected again, replacing part of the Courier text with the Courier New font to see if it would work, the text in Courier New is showing correctly while the text in Courier still shows as squares.
When I check the fonts in the PDF file, CourierNewPSMT - TrueType - ANSI, is embedded (not partially ??) and Courier - TrueType - ANSI is partially embedded.
So I don't understand why Courier was embedded as Type 1 (but it worked) and now it supposedly embeds a TrueType Courier font that doesn't seem to work.
Again, the major problem is that there is no warning that the font won't output correctly, so you have to check the whole document again or you might end up with some parts unreadable.

How can I resolve an issue with Word 2013 incompatibility errors?

My Client is continually having issues with his Office 2013 installation, specially with Word 2013.
After re-installing Office 2013, he gets the following error when trying to run Word.
When he clicks on the Repair now, he gets the following error;
He used the Microsoft uninstall tolll to fully remove Office 2013 before re-installing Office 2013.
His PC is running Windows 8.1
Any help would be appreciated.

Hi,
Do other Office applications occur the same issue?
Based on this error message, I find a similar issue.
http://answers.microsoft.com/en-us/office/forum/office_2013_release-word/keep-getting-error-were-sorry-but-word-has-run/b9a014db-c4c6-46aa-95b1-679308735f66?page=5
You can follow Mpw1979’s reply, here is detail information.
“When I tried to change the compatibility mode on Winword.exe I found there were no options available so I right clicked and selected Troubleshoot Compatibility.
From here select Troubleshoot Program then tick I Can't See My Problem Listed and then select Windows 8 from the next screen and apply the changes and it worked.
I should also note I had Abbyy finereader installed and the plugin was causing Word to crash so i simply opened in safe mode and disabled the plug-in.”
Regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

HT4623 updated to ios7 on Sunday - I am having major problems with my phone since - keeps freezing - updated itunes first then backed up my phone to my laptop. Is it worth it at this stage doing a restore?

I updated my iphone 5 to ios7 on Sunday and have been having m?ajor problems with my phone since. It keeps freezing and I have to constantly press the home and on/off switch to get it to restart. I had updated my itunes and backed up the phone before doing the update. I'm getting very frustrated at this stage as the phone is practically useless. Is it worth doing a restore? Bearing in mind that I just tried to do that and got a message to turn off the 'find phone' feature in settings and when I tried to get into settings the phone froze again.

I don't have a good answer for you but reading these forums, it seems that network drives can often cause problems with iTunes like you describe.
Patrick

Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?

Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode.* The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

Problems with iTunes/ipad2 I'm trying to buy FREE apps and I'm being told my card is declined but I also have more then enough credit on my account! Anyone having this problem?

Problems with iTunes/ipad2 I'm trying to buy FREE apps and I'm being told my card is declined but I also have more then enough credit on my account! Anyone having this problem?

Part of the validation for credit cards is that they need to be registered to exactly the same name and address that you have on your iTunes account, which prepaid cards tend not to be. Do you have a proper credit card that you could use ? Or are iTunes gift cards available in your country so that you could try using them as your payment method ?
Until you have a valid payment method on your account and what you owe iTunes has been paid off then you won't be able to download any item from the store, including free apps (and updates to apps).

HT1998 I have what I believe, though I am not certain, an Airport Extreme 1st generation. My internet speeds on my hardwired pc are running in half and a bit higher on my Mac Pro. Cable claims it is a problem with the router since I can bring the PC speed

Bear with me please as I have never used the community before. I have an Airport Extreme 1st generation at least I think it is a 1st generation. My PC is hardwired and my Mac Pro, obviously wireless. I have 50/8 mbps service but the speeds on my PC run around 20/8 and 30/8 on the Mac. Cable says it is a problem with the airport since my PC speeds rise to 50 when the airport is disconnected. Does anyone know what to do?

The simplest way would be to perform a "soft" reset on the AEBS. This type of reset will temporarily disable all of the AEBS's passwords up to five minutes. This should give you ample time to access the AEBS with the AirPort Utility to change it.
If you don't want to actually change the password, then you can possibly retrieve the password from the OS X Keychain, as follows:
Run the Keychain Access utility found in \Applications\Utilities
In the category column (on the left side of the utilities' window), select "All Items."
In the right column look for your Network Name. It will have a "Kind" of "AirPort network password."
Double-click on your network name listing.
Click on "Show password."
Enter your Mac's administrator's password
Your wireless network's password should now be displayed.

I have a problem with two PDF's when trying to open them through a link on a web page. The two PDF's open fine with Adobe on my own PC and on the server I have copied it to but when they are opened through a link on a web page (pointing to the server wher

I have a problem with two PDF's when trying to open them through a link on a web page. The two PDF's open fine with Adobe on my own PC and on the server I have copied it to but when they are opened through a link on a web page (pointing to the server where the PDFs open fine) I get an error 'There was an error processing a page. Invalid function resource' The other one just doesn't open at all. Can anyone help with this please?

Hello,
Are the pdf linked correctly in the website? Is this a public website? If yes, please post the link here.
~Deepak

I'm having problems with my internet since I have upgraded. I am afraid to upgrade on my Macbook pro now. I don't want the upgrade to slow down my laptops. Any suggestions?

I'm having problems with my internet since I have upgraded. I am afraid to upgrade on my Macbook pro now. I don't want the upgrade to slow down my laptops. Any suggestions?

Wifi issues are one of the common issues being reported by users. There is not much you can do at this point but wait and hope that th 10.8.1 update will address these issues.

I can't start AE. Ae always shuts down. There is a Problem with the "AEDynamiclinkServer". I tried everything. But it doesn't work. How do I get AE back to work?

I can't start AE. Ae always shuts down. There is a Problem with the "AEDynamiclinkServer". I tried everything. But it doesn't work. How do I get AE back to work?

What "everything" have you tried?
What exact version number (down to the last decimal) is your AE?
What OS are you using?
What are your other system specs?
When did it work last? What happened between then and now?
FAQ: What information should I provide?

Problems with regular Texting since iOS 7.0.3

Hello, I have an iPhone 5s recently upgraded to iOS 7.0.3 via OTA update. I never use iMessage, I have an unlimited text plan, so I always have used SMS with everyone. However, after this last update, I have problems with regular SMS. I can send SMS to everyone as usual, but can only get text messages from some-all of them using iPhone 5 with at least the lastest iOS6 version. I have noticed then only way to text them now is to turn on iMessage, otherwise I keep missing their replies. These are people, that until the last upgrade, I was texting with on a regular basis with no problems using plain SMS with iMessage option OFF. Contrary to most, I don't want to use iMessage but rather use regular carrier provided SMS.
For instance, both my son and daughter use an iPhone 5 with iOS 7 (but not the latest patch 7.0.3) installed, I can text with my son OK, but can't get any texts from my daughter, can only communicate with her using iMessage-BTW, we are all on the same network on a family plan. Can't understand this at all. Since I can SMS with some, but not others I don't think this is a problem with my carrier but rather a problem with my phone since the update to 7.0.3, and they say I am the only one they have problem with texting with and I am the only one on the new software version.
Anyone else has noticed this issue.

I wonder if this may have something to do with iMessage on my Macs. Recently updated to Maverirks and the iMessage app on my Macs was set up to my email and mobile phone (it wasn't before). I wonder if this is so, then whoever I send an SMS to that has iMessage on and replies back, will be picked up by iMessage since is turned on on my Mac, since replies go to the Mac but not my phone. If the sender has iMessage off, I get the SMS fine.

HT1391 How can I get a full history of our purchases? We had some problems with some downloads since 5/25/12.We were charged for items that said "Free"? Help

How can I get a full history of our purchases? We had some problems with some downloads since 5/25/12.We were charged for items that said "Free"? Help

iTunes Store menu > View My Account...
Sign in and select "See All" in Purchase History.
You can only see them in "batches" of ten. As far as I know there is no way to obtain a comprehensive summary.
The prices are tabulated in that list. If they were supposed to be free, and they show that you were charged, then click the arrow next to the suspect purchases and click "report a problem".

Hye guys i've a problems with my iPhone : since few days i can't open my application 'apple store ' .. It's very strange ! So have you solutions ?

Hye guys
I've problems with my iPhone , since few days i can't open my application Apple store .. It's very strange because it's the first time ! And everything is okay in my phone .. If you have solutions tell me !

Hello again,
I just realized that it was the Address book I was looking for, and it's there. I'm sorry --and embarrased- for the confusion!
I can't delete the discussion, so please considered resolved!
Thanks!

Problem with word 2013 since I tried to share a page through mail

Similar Messages

Maybe you are looking for