Problems to activate transfer rules and infosource 2lis_02_itm and 2lis_02_

hello,
now I am working with the 0PUR_C01 cube of purchasing and I want to active the data flow before for it.
I try to do it directly selecting data flow before in the activation settings of the cube, but I coludn´t
after that, I try to do it activating the transfer rules and the infosource separately  but I get some errors, teh most important thing (because I have the same situation in other areas) is:
The creation of the export DataSource failed
Message no. RSBM035
Diagnosis
The creation of the DataSource &v1& was unsuccessful.
System Response
Whilst generating the export InfoSource, the metadata for a DataSource must be generated. An error arose when doing this.
Procedure
Consult the appropriate developer (function module: RSB1_OLTPSOURCE_GENERATE).
I hope that some can help me with this issue,
Thanks in advance and best regards,
Niurka

Thank you very much Chetal,
I activated others Infocubes, but I have the same problem for Infocubes with ODS inside they data flow,
I tried with some notes like: 538052 and I enter the client but not the user or the server, I proved the RFC Connection too.
But the bug issue is the export data source creation that failled everytime, right now  I try to solve this and the log says some error about the syntax error in transfer routine for the infobject 0GN_R3_SSY this object exist as characteristic and his convertion routine is ok (because I verificated) and exist as part of the transfer rule but I don't know how to go to the routine creator for check this point.
Thank you very much in advance,
Niurka.

Similar Messages

  • Not getting transfer rules for 2LIS_02_HDR , 2LIS_02_ITM and 2LIS_02_SCL

    Hello Bi experts,
    Actually i am implementing standard Purchasing module in BI system.
    While implementing , i have installed cube 0PUR_C04 with data flow before options.
    After installation , i am not getting transfer rule for 2LIS_02_HDR , 2LIS_02_ITM and 2LIS_02_SCL .
    I am getting transfer rule for 2LIS_02_S011 only.
    0PUR_c04 contains these 4 dataspurces - 2LIS_02_HDR , 2LIS_02_ITM and 2LIS_02_SCL , 2LIS_02_S011 .
    So how can i get these transfer rule. and if we want to implement std Purchasing module in BI , which Cubes are required or necessary.
    In metadata repository also , for Cube 0PUR_c04 , it does not showing transfer rule HDR/ITM/SCL. there also it is now showing transfer rules.
    I will be also very thankful if anybody just give me overview of purchasing.
    Thanks,
    Sada.

    Hello Mani,
    Thanks a lot.you are the first one who has answered my que. which i expect .
    Look at following floe in infoprovider in my system. and please tell me what exactly i should do?
    Cube->Purchasing Groups                                                                                0PUR_C04
               Update Rule->0PUR_C04 2LIS_02_HDR                                                                       AY0XVMCJPXXXXXXXXXXXXXXXX
                                    Infosource->Purchasing Data (Document Header Level) as of 2.0B      2LIS_02_HDR
               Update Rule->0PUR_C04 2LIS_02_ITM                                                                         4YSO2PF9XXXXXXXXXXXXXXXXX
                                     INfosource->Purchasing Data (Document Item Level) as of 2.0B          2LIS_02_ITM
               Update Rule->0PUR_C04 2LIS_02_S011                                                                      CSB3FHGQXXXXXXXXXXXXXXXXX
                                     Infosurce->Purchasing groups                                                               2LIS_02_S011
                                                      Transfer Rule->from 2LIS_02_S011 for SC4 Client 600        2LIS_02_S011                  SCXCLNTXXX
                                                                             Datasource->Purchasing groups                    2LIS_02_S011
               Update Rule->0PUR_C04 2LIS_02_SCL                                                                        4ZZ0DMZXXXXXXXXXXXXXXXXXX
                                     Infosource->Pur.Data (Document Schedule Line Level)                         2LIS_02_SCL
    Mani i am expecting answer from you.
    Thanks,
    Sada

  • Activate transfer rules - problem

    I was creating transfer rules for DSO 0FIGL_O02 for infosources 0FI_GL_4. Activate transfer rules  bring me mistake :Data element for InfoObject BELNR 0AC_DOC_NO could not be created.
    Information from log:
    Data element for InfoObject BELNR           0AC_DOC_NO could not be created
    Message no. RSAR274
    Diagnosis
    Special data elements of the type and length of the source system are required for creating the transfer structure. Errors occurred while creating a data element of this type for InfoObject BELNR           0AC_DOC_NO. The data element should be of type CHAR and length 000010. The technical name of the data element is /BIC/OW_######################.
    Procedure
    Check the log.
    Check data element /BIC/OW_###################### in the repository. Activate data element /BIC/OW_###################### in the repository and check the activation log, if necessary.
    0AC_DOC_NO - is important because this is key in DSO. This object have type CHAR and length 10. What i shoult do?

    Hi,
    Activate the Infoobject 0AC_DOC_NO is not recognizing by system please re-activate this once again and check the transfer rules.
    Regards,
    Anand Tej.

  • Error in creating transfer rules beween infosource and datasource in BI 7.0

    Hello Guys
    I am gettting the following error when trying to create transfer rules between infosource and datasource.
    1. Error while activating transformation
    2. Deletion of Objects with Type Transformation
    3. Preprocessing/Collecting DDIC Objects for Transfor mation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
    4. Post Processing/Checking the Deletion for Transfor mation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
    5. Object Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K has been deleted
    6. Name of object of type 'TRCS' is missing
    7. Name of object of type 'TRCS' is missing
    8.Key rule 1 (target field: 0COMP_CODE): Initial update set
    9. Key rule 2 (target field: 0PLANT): Initial update set
    10. Key rule 3 (target field: 0OI_EBELN): Initial update set
    11. Key rule 4 (target field: 0AC_DOC_NO): Initial update set
    12. No rule exists
    13. Saving Objects with Type Transformation
    14. Saving Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
    15. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K saved successfully
    16. Activation of Objects with Type Transformation
    17. Saving Objects with Type Transformation
    18. Internal Activation (Transformation )
    19. Preprocessing / Creation of DDIC Objects for Trans formation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
    20. Post Processing/Checking the Activation for Transf ormation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
    21. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was activated
    22. Syntax error in GP_ERR_RSTRAN_MASTER_TMPL, row 1,644 (-> long text)
    23. Error during generation
    24. Error when activating Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
    25. Resetting of Incorrect Objects Back to the Active Version (Transformation )
    26. Preprocessing / Creation of DDIC Objects for Trans formation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
    27. Post Processing/Checking the Activation for Transf ormation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
    28. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was activated
    29. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was reset to the active version
    Can anyone send me a document on how to create cubes, info and data sources,ODS's,multicubes and t/f and update rules in BI 7.0
    Thanks.

    Transformations in BI7
    http://help.sap.com/saphelp_nw04s/helpdata/en/f8/7913426e48db2ce10000000a1550b0/content.htm
    Regards,
    R.Ravi

  • Problem in activating Transfer rules

    Hi Experts,
                          I could not able to activate transfer rules using program "RS_TRANSTRU_ACTIVATE_ALL" by giving source system name and Infosource in Quality system.I am getting success status "No Transfer Structure Selected" but still transfer rules are in inactivate.I tried replicating  data sources also still problem persists.
    Please provide any suggestion how can i go about it.
    Edited by: Sunilbm on Oct 30, 2009 12:16 PM

    Hi,
    Is there any error message when the transfer rules are transported from Dev to Quality?
    Are the transfer rules transported from Dev to Quality successfully.
    Post the message if any when the transport request is moved from Dev to Quality.
    Regards,
    Rama Murthy.

  • Problem while transporting transfer rules in BW 3.5

    Hi All,
    I have a problem while transporting transfer rules in BW 3.5.
    I have just checked the box for conversion to Transfer structure / Transfer rules of an infoobject and tried to transport it to quality. I got this below error message:
    The selections   T ZBW_ZBILLRATP_TEXT_BA specify more than one DataSource
    Diagnosis
    You need to select an individual DataSource based on the selection conditions
    InfoSource =
    Source System =
    Object Version = T
    Transfer Structure = ZBW_ZBILLRATP_TEXT_BA
    although the select event is not unique.
    Procedure
    Check the objects to which the selection applies.
    Reference to transfer structure ZBW_ZBILLRATP_TEXT_BA not available. No activation possible.
    Message no. RSAR436
    Diagnosis
    Transfer structure ZBW_ZBILLRATP_TEXT_BA should be transported into this system.
    However, no DataSource mapping refers to this transfer structure.
    System response
    The transfer structure was not activated or deleted.
    Procedure
    Ensure that DataSource mapping, with a reference to the transfer structure ZBW_ZBILLRATP_TEXT_BA is on the same transport request. Use the transport connection to create a consistent request.
    Can any one provide me details of how to overcome this issue. I tried transporting all related objects.
    Regards
    Lakshmi

    Hi Lakshmi,
    Befor Transporting the Transfer rules, make sure that you are transporting the Active Versions of your Datasource & DataTarget between which your transfer rules exist.
    Also make sure that the Transfer rules are active before it is transported.
    Hope it helps!
    Regards,
    Pavan

  • Not possible to edit Comm. Structure or Activate transfer rule

    Hello Experts,
    Do you know what is causing the problem in development box we facing? We are neither able to edit Comm. Structure nor activate transfer rule for myself data mast data sources in BW. Basically, it doesn't let us go in edit mode when we open communication/transfer rule screen on workbench (RSA1). This should be something basic problem but I can not think of anything now? Do you have any suggest about what to check?
    Thanks,
    Nimesh

    I agree, Raj.
    Details of what I have repeated (multiple times so far) in system:
    Regenerated data source from ODS. Replicated data source to info source and then activated by program Teja suggested (that's where I am having trouble because I can not go to edit mode within transfer structure details screen). I tried loading data with init. request from ODS to Cube and failed with time stamp error of data source.
    Issue is still unresolve?
    Nimesh

  • Programme to activate transfer rule

    Hi Gurus
    I am trying to load data to newly transported work from BWD ( infosource 0FI_AA_11 ) but I got some error while loading transactuion data so i was told to run ABAP programme RS_TRANSTRU_ACTIVATE_ALL to activate transfer rules but not sure which transaction I need to use to run this programme .So would you pl tell me the name of the transaction and also tell me the logic behing running this programme?
    Thanks as always

    Hi Gurus
    I have activated all the transfer rules and then try to load the transaction data but its stil;l giving me the same error.
    <b>Extraction of 0FI_AA_12 not possible. Extract 0ASSET_AFAB_ATTR first     
    Errors in source system</b>     
    I have already loaded the master data and I have replicated the data sources also .So pl tell me what and where I need to check to load the transaction data successfully.

  • Unable to activate Transfer Rule

    Hello Experts,
    I am not able to activate Transfer Rule in my System ( BW 3.0).
    I have written one routine and then when I am trying to activate I am getting below error messageu201D
    Object 0NOTIFICATN_ATTR object version not found in table.
    My Data Source name is 0NOTIFICATN_ATTR.
    I have also tried to activate by using   RS_TRANSTRU_ACTIVATE_ALL but still no luck.
    I also checked table TADIR and I can see entry over there.
    Regards,
    Pankaj Naik.

    Hi Pankaj,
    Try to activate the transfer rules by executing the SE38 report  - RS_TRANSTRU_ACTIVATE_ALL.
      Also check the note - 884385 , For 'RSAR' errors while activating update and transfer rules.
    Regards,
    Lokesh

  • Activate Transfer Rules

    BW Experts,
    I am trying to activate transfer rules for 0MAT_PLANT. I get an error saying "Error while activating DDIC "
    The diagnosis says the following
    <b>/BIC/CABK0MAT_PLANT_ATTR-LOSFX (combination reference table/field /BIC/CABK0MAT_PLANT_ATTR-WAERS does not exist)
    Message no. AD855
    Diagnosis
    The reference field specified for the field does not exist in the specified reference table.
    Procedure
    Check the reference field and reference table for this field in the single field maintenance of the corresponding table.</b>
    Any Idea what has to be done. Help is appreciated.
    Thanks
    Ashwin

    hi Aswhin,
    0mat_plant_attr is business content datasource, seems this should not happen, if the waers not exist then the datasource should can be activated, perhaps metadata inconsistency (ddic error), try to replicate datasource again from bw.
    or do you add fields (no access to system to cross check the datasource in r/3),
    as mentioned check in r/3 rsa6, datasource 0mat_plant_attr, double click the 'extract structure', check if losfx has waers, if no exist, and you have no enhancement, try to transfer again with rsa5. then replicate datasource again from bw and try activate transfer rules.
    hope this helps.

  • I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

    I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

    Hi,
    Regarding the issue here, please take a look at the below links to see if they could help:
    Slow data transfer speed in Windows 7 or in Windows Server 2008 R2
    And a blog here:
    Windows Server 2012 slow network/SMB/CIFS problem
    Hope this may help
    Best regards
    Michael
    If you have any feedback on our support, please click
    here.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Error when activate transfer rule 0DISTR_CHAN

    Hi dear all,
    I''ve a quesiton urgent, plz.
    I've activated IO 0DISTR_CHAN, so his flow before and after. I went to load master data, but I found his transfer rule isn't yet activated. I tried to activated it but a error message like:
    Error generating program
    Message no. RSAR245
    Diagnosis
    An error occurred in the program generation:
    Program / Template:   RSTMPL80
    Error code / Action: 6
    Row:        49
    Message:    Statement concluding with "...LIKE" ended unexpect
    Procedure
    If the problem occurred during the data load or transport, activate the transfer rule.
    If the problem persists, search in the SAP note system under 'RSAR 245'.
    Please help!
    Thanks a lot.
    Juan

    Hi dear all,
    Thanks!
    I tried to re-install this business content just with flow before. And It works.
    Best regards.
    Juan

  • How to knw the Transfer rules of Infosource 80PUR_O01?

    In AWP,
    In Metadata Repository,
    Taking an example,
    "<b>Vendor Evalution-0PUR_C02</b>" Infocube we get Update rules at the bottom of the page,
    from Update rules page, in the bottom of tht page we get Infosource,
    Now in this Infosource page we get <b>'Transfer Rules'.</b>
    this is the normal procedure i suppose to find <b>'Transfer Rules'</b>.
    Similarly im trying out for <b>"Purchasing Order Qty Service Level-0PUR_C07"</b>,
    but im not able to get the 'Transfer Rules for ths Cube.
    Please let me know the Procedure, how to find out Transfer rules for this <b>"PO Qty Service level"</b> Infocube................?
    Regards,
    Sourav

    the best place to search the content objects is HELP.SAP.COM
    InfoSources
    2LIS_02_ITM Purchasing Data (Document Item Level) as of 2.0B
    2LIS_02_SCN Allocation Schedule Line with Confirmation
    2LIS_02_CGR Allocation Confirmation with Goods Receipt
    2LIS_02_SGR Allocation Schedule Line with Goods Receipt
    http://help.sap.com/saphelp_bw33/helpdata/en/c4/1478c35bda7b4cb5224251c84ffaa2/frameset.htm

  • Problem in migrating Transfer Rule (3.X) to Transformation (7.0)

    Hi All,
    I am working on migrating bussiness contents from 3.X to 7.0. Have migrated transfer rule into transformation successfully. But transformation remains inactive by default & as I try to activate it, system throws error.
    The error is associated to the formula used in rule as an syntax error.
    Formula - IF( KOART = 'D', BUSINESS_PARTNER, '' )
    Error - Formula element is not allowed here.
    I didnt change the formula after migrating. Infact it is same as it was in transfer rule - IF( Account type = 'D', BUSINESS_PARTNER, '' )
    'Account Type' is changed to 'KOART' by system itself during migration.
    Please suggest views to resolve the issue.
    Regards,
    Pritesh

    Though, migration of transfer rule into transformation done successfully, since BI 7.0 uses OO ABAP, u have to change routines code, formulas manually. 
    I think, u r missing ' ' for BUSINESS_PARTNER.
    Formula - IF( KOART = 'D', 'BUSINESS_PARTNER', '' )

  • Error RSAR 245 - Can't activate Transfer Rules in BI 7.0

    Hello SAP community!
    I'm working with BI 7.0 trying to create an Infosource for loading an InfoObject (Z version of 0MATERIAL but with less attributes) from a Flat File (CSV file).
    In my Datasource/Transf.Struct fields are of types CHAR, DATS, and NUMC since I am reading from a flat file. Target attributes and characteristic are of the same data types (CHAR, DATS, NUMC).
    The error message is:
    Error generating program
    Message no. RSAR245
    Diagnosis
    An error occurred during program generation:
    Template:   RSTMPL80
    Error code: 6
    Row:        47
    Message:    Statement concluding with "...LIKE" ended unexpect
    Procedure
    Correct the template to remove the problem.
    I am new to BI 7.0 and just have experience with BW 3.5.
    I have searched for OSS notes and found several like 587869, 596749, 602318, but after reading the notes I still don't know if the problem is a support package is missing or whether I am missing some activity/action during creation of Infosource (since I'm new to BI 7.0).
    I have checked SU53 right after error message occurs and it says that "The last authorization check was successful", so I don't think it is an authorization problem.
    Can anybody help?
    Thank you in advance.
    Mario

    Hi Maro,
    If you are running on a support package less than 10 please upgrade and try as we had issues with data load from flat file , we got rectified after patch level upgrade.
    Ideally if possible move on to SP14 , which is a bit stable and eliminates some of the issues automatically.
    Raja

Maybe you are looking for

  • Skyp 7.1 Has Stopped Working on Windows 7

    I get the Stopped Working error since last week. This is what I've done: Run the %appdata% and %temp%\skype commands and renamed or deleted folders Uninstall/reinstall Skype - still get error re-run #1 - still get error Update audio drivers - still g

  • Problem with new iOS 5 with 3 GS

    I have downloaded iOS 5 but my 3GS phone hanging at 'Find My iPhone' stage and cannot go back or forward

  • I want to trial Elements 11 without damaging installed Elements 9

    I want to trial Elements 11 to confirm that it works with my new camera. I have Elements 9 working and I do not want to damage that installation until I have decided to buy 11. I downloaded the trial.  As soon as I start it I get an intimidating ques

  • Oracle 10g not showing in the Home selector

    How do I make Oracle 10g appear in Home selector . I had oracle 8i installed previous.

  • Aperture Library.aplibrary

    For some reason Aperture will not open. I get the message "Aperture Library.aplibrary is an iPhoto library and cannot be opened in Aperture. However, I am not trying to open an iPhoto library nor do I have any photos in an iPhoto library.