Problems to keep the network configuration on Envy100

Recently I bought an Envy100 and I got success to configure the printer at my private network.
But few minutes later the network icon on touchscreen from the printer became darkned indicating the network is not configurated.
If I start the procedure to reconfigure the network I'll success again but just for few minutes.
Did you see this problem before ?
Thanks in advance,
Cassio.

Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). Yours is 192.168.0.100 to .199 Let's use 192.168.0.220 for your printer.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.

After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ

Izit software or hardware? Confuse:(
Only can use wifi now.
Any way thanks guys for ur suggestion:) amishcake and simes

When I enter my password to start my atv it tells me, that "there was a problem connecting to the network." My Ipad works fine but not my new atv. I have reset my password multiple times with no help. I have also rebooted my wireless server.take it bac

When I enter my password to start my atv it tells me, that "there was a problem connecting to the network." My Ipad works fine in my house, but not my new atv. I have reset my password multiple times with no help. I have also rebooted my wireless server. Do I take it back?

Where is everyone???? Does anyone have an answer???
Allik1

Canon pixma mg5420 "printer not responding". I printed the "network configuration page" . 70% strng

I printed the "network configuration page". strength at 70%. how can I fix this?
thanks,

Hi Heltonc,
So that the Community can help you better, we will need to know what Computer Operating System you're using. (Windows XP/Vista/7/8 or Mac 10.x)
Any other details you'd like to give will only help the Community better understand your issue!
If this is an urgent support need, please CLICK HERE to reach our friendly Technical Support Team by phone or email.
Thanks and have a great day!

My apple tv gives a msg " there was a problem connecting to the network " check your settings and try again (5) - sometimes it comes with the number 3905 - i have tried all the suggestions from reset, restart, to switching and unplugging everything -

I was trying to download a movie and then it said there was a problem connecting to the network , check your settings and try again (5) . I tried all the various suggestions already in the discussions including restore, restart, unplugging everything etc - still doesnt work. Any other new ideas? I bought my apple tv just a few days ago and am really annoyed its already run into problems

Reboot router, make sure it's up to date. If on wifi try ethernet. Make sure DNS is set to automatic (settings - general - network).

My Apple TV is reading " There was a problem connecting to the network" error - 3906

I have reset all network components and the Apple TV. I first set up Apple TV and it worked beautifully. The next time I turned it on it gave me the error message. I have tried reconnecting to the netwrk multiple times. I have my laptop and my ipad connected to the network, but the Apple TV will no longer connect. I am out of solutions. Any suggestions would be greatly appreciated. Thank you.

I had the same problem. I just solutioned it just by disabling MAC Address filtering in my LinkSys router. This is strange as I did enter the address of my ATV3 in the list of allowed devices in the router configuration software.
The truth is that it now works! I just seems that ATV is not compatible with MAC Address filtering.

Envy114c won\'t print, everything is correct per the network configuration sheet

Envy114c won't print, network configuration sheet says everything is good, show connected to my wirless network, prints a test page, but won't print any documents. It opens the action that's it being sent to the printer, the icon on the printer appears, then after a brief period it disappears and nothing happens.

Sorry that you are having a problem printing.
You can run the printer and scan doctor and check the results.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03275041
Did everything stop working AFTER you updated the driver using driver tool?
Do you know how to restart the print spooler?
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Broadcast with Proxy.Pac define into the network Configuration

netbios is activate on desktop,
when a proxy.pac is define, a lot of broadcast are generated by a lot of internet site : google.com/bing.com/yahoo.com
this doesn't happen is i defini the proxy server directly in the firefox configuration (no proxy.pac)
i've tested with a minimalist proxy.pac (just return the proxy server => same problem) thanks you

Raymond Zachary wrote:
I have a G4 Laptop that connects readily to the University Hotspot as well as to my home wifi router. However the College would prefer I use the admin network which uses the same wifi hardware but is secure, unlike the hotspot network. The system is predominantly populated with XP machines and the IT folks have attempted to get me on the admin network but authentication with WPA Personal, WPA Enterprise, WPA2 Personal, and WPA2 Enterprise do not work. When I try to use Airport Assist or diagnostics nothing helps. If I ask Airport to see the "Configuration" file it sends me to an area of Microsoft related files which is an enigma to me.I suspect something in the configuation file, wherever it is, is important and perhaps similar to what XP uses. Does anyone have any information about hooking a Leopard G4 into a windows based network?
You shouldn't have to deal with any such configuration files. Pull down the AirPort menu bar item. In the resulting list you should see the "admin network". Select that, then enter the supplied password. If that doesn't work, check and report exactly what happened.

I am having problems signing into the network at my school. The PC laptops work but Macs show the fact that the network is being upgraded but the district office insists it isn't.

I can connect to the guest network on my Mac but when I open Firefox, the main authentication page where I type in the user name and password states that the network is being upgraded and will not be available for use. The main district office technician says the network should be fine and can connect with his windows laptop just fine. Are there some things i need to change in the Firefox preferences that would fix this problem for my Mac?

A PC can have more issues connecting than a Mac.
But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
Important thing is to get access to the TC.
The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
http://support.apple.com/kb/DL1482

With all the problems, why keep the iPhone?

Over the last two weeks I have read hundreds of complaints about the iPhone. There seems to be a wide range of problems. I have also read that many, if not most, have not been able to resolve their problem. This leaves at least some of the iPhones unreliable at most.
My question is why are all these people keeping the iPhone if they are having that much trouble with it?
Of course, I may be in the same boat soon because I ordered the iPhone despite what I have read. For one thing, I like the features of the iPhone. And another reason I am going to give it a try is because I know a guy that got one on the first day and he has never had a single problem with it. However, if I do have problems then I will return it and get a different brand. I for one will not put up with a phone that is not totally functional. And I will not wait for software updates hoping it will fix the problems.
I even read a few posts that had a whole list of problems and had to reset the phone continually. Yet, they said: Well, that is alright. I love my iPhone and I am going to keep it anyway… I was amazed.

ddell wrote:
My question is why are all these people keeping the iPhone if they are having that much trouble with it?
Of course, I may be in the same boat soon because I ordered the iPhone despite what I have read. For one thing, I like the features of the iPhone. And another reason I am going to give it a try is because I know a guy that got one on the first day and he has never had a single problem with it. However, if I do have problems then I will return it and get a different brand. I for one will not put up with a phone that is not totally functional. And I will not wait for software updates hoping it will fix the problems.
Re "I ordered the iPhone despite what I have read", it will be interesting to see what you do when the reality is upon you
Phil

TS4268 i keep getting message that cant be set up - check network connection. went to Apple store. they could not set it up and referred me to this article which also doesn't solve problem. Keeps getting network message, even in apple store. Help!!!!

I keep getting message to check network connection when i try to use face time or imessage. Went to apple store. They could not fix it and referred me to apple support which sent me an article to do the things the store had already tried. Store thinks it is a problem with the ID although the correctID and p/word are being used. Just get message that cant sign in and check connection and try again. Happens in every location. Can anyone help me with this since Apple can't?

Since you've tried the Apple Store, etc., even though you say your Apple ID and password are good, I suspect that's the likely issue.
I recommend double checking that with Apple. This link might help:
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

Where is the Network configuration file?

I have a G4 Laptop that connects readily to the University Hotspot as well as to my home wifi router. However the College would prefer I use the admin network which uses the same wifi hardware but is secure, unlike the hotspot network. The system is predominantly populated with XP machines and the IT folks have attempted to get me on the admin network but authentication with WPA Personal, WPA Enterprise, WPA2 Personal, and WPA2 Enterprise do not work. When I try to use Airport Assist or diagnostics nothing helps. If I ask Airport to see the "Configuration" file it sends me to an area of Microsoft related files which is an enigma to me.I suspect something in the configuation file, wherever it is, is important and perhaps similar to what XP uses. Does anyone have any information about hooking a Leopard G4 into a windows based network?

Raymond Zachary wrote:
I have a G4 Laptop that connects readily to the University Hotspot as well as to my home wifi router. However the College would prefer I use the admin network which uses the same wifi hardware but is secure, unlike the hotspot network. The system is predominantly populated with XP machines and the IT folks have attempted to get me on the admin network but authentication with WPA Personal, WPA Enterprise, WPA2 Personal, and WPA2 Enterprise do not work. When I try to use Airport Assist or diagnostics nothing helps. If I ask Airport to see the "Configuration" file it sends me to an area of Microsoft related files which is an enigma to me.I suspect something in the configuation file, wherever it is, is important and perhaps similar to what XP uses. Does anyone have any information about hooking a Leopard G4 into a windows based network?
You shouldn't have to deal with any such configuration files. Pull down the AirPort menu bar item. In the resulting list you should see the "admin network". Select that, then enter the supplied password. If that doesn't work, check and report exactly what happened.

Problems printing over the network?

Hello All,
I recently purchased a new MAC and I am trying to get my printer configured. I have a Canon IP6600D printer connected to a Linksys Wireless G Print Server. I downloaded the appropriate software from Canon to install my printer, which works when I have it connected via USB. However, when I try to install the printer as a network printer the MAC does not recognize the printer as a valid device. I try to add the printer as a Generic PostScript Printer; however, it still doesn't print at all.
I've tried enabling AppleTalk on the wireless print server, but still I get nothing. Any help you can offer would be greatly appreciated, thank you very much!!!

Hello Phil,
The Canon driver cannot be used this way. It is designed for USB connection only. To get the iP6600D working for your environment, you need a product like Printfab. Check out their web site (www.printfab.net)
Regards,
Paul

Problem while uninstalling the Mysql configured with Adobe LC ES2

I have Mysql database installed along with the Adobe LC ES2.Now i want to use Oracle11g as my database to save all the data from my process.How can i uninstall the Mysql database.i tried to uninstall it but after uninstalling i am not able to start the jboss service as its displaying the error message of dependencies.Please guide me to solve this issue.

"While i am editing the Adobe_ds.xml file in the text editor i am not able to save the data."
What do you mean here? Is it showing access deneid error? If so, just stop JBoss and save the changes. It should work.
If you do not need the MySql DB data, you must re-initialize the Oracle DB to use with LCES2.
Try the following steps:
1. Remove the EAR files (installed Solution Components) from deploy folder.
2. Update the Adobe-ds XML.
3. Try to start JBoss now. The JBoss should start without any errors now.
4. Run the Configuration Manager and choose the following actions (as mandatory):
      -> Configure LiveCycle EAR
      -> Initialize LiveCycle Database
      -> etc. etc.
5. Reboot JBoss.
I hope these steps may help you to recover from your problems.
Nith

Problem coming in the alert configuration

Hi frnds,
I have created alert category in abap stack , created alert rules in rwb alert configuration. And when i was testing via report rsalerttest, received the alert in alert inbox and on my outlook .
While testing through mapping sometimes I received notificationl on my id, but sometimes I am not getting alert notificationl to my id and in alert inbox.
why the same alert configuration is not triggering notification every time, and only few times triggering notification as expected.
Can you please give some light on it.
Reg,
Rajesh

Hi,
Please un check Suppress Multiple Alerts option for your alert rule.
Thanks
Hamja
Edited by: Hamja Hussain on Jul 14, 2009 2:08 PM

Problems to keep the network configuration on Envy100

Similar Messages

Maybe you are looking for