Envy114c won\'t print, everything is correct per the network configuration sheet

Envy114c won't print, network configuration sheet says everything is good, show connected to my wirless network, prints a test page, but won't print any documents. It opens the action that's it being sent to the printer, the icon on the printer appears, then after a brief period it disappears and nothing happens.

Sorry that you are having a problem printing.
You can run the printer and scan doctor and check the results.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03275041
Did everything stop working AFTER you updated the driver using driver tool?
Do you know how to restart the print spooler?
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Similar Messages

Officejet 6500 won't print when Laptop is on the network.

We have a HP Officejet 6500 that connects to a laptop vis USB plug. It worked fine for a few weeks, but now anytime the laptop is connected to the office network by ethernet is will not print. Once you unplug the network cable from the laptop it prints fine. The laptop is running windows 7 and we installed the printer using the Windows 7 drivers from here. Please help!

This doesn't make sense. The printer is exhibiting behavior noticed when a network printer is connected to a laptop while the laptop is connected to a VPN. But in this case, neither the printer is connected on a network, not is the laptop connected to a VPN per se.
Are you sure all the latest drivers for your laptop have been installed? That's pretty much the only thing I can think of right now.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Envy114c Won't print

I have an Envy114c network printer, it's connected to the network per the network configuration report, everything I test says it's connected, but it won't print from anything except a test page. I have an excellent connection, When I send a message to the printer, it opens up the printer information and shows it being sent to the buffer, the print icon appears in the task bar, then in a very seconds it disappears, and nothing else happens. I've cleared the Print Que several times. Just doesn't want to work. It's been working for a long time, then I updated the driver using Driver Tool, and it's just gone crazy. At&T doesn't want to help me and I have a contract with Easy support.com they won't touch it. HELP
This question was solved.
View Solution.

Sorry that you are having a problem printing.
You can run the printer and scan doctor and check the results.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03275041
Did everything stop working AFTER you updated the driver using driver tool?
Do you know how to restart the print spooler?
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

My dad gave me an iPhone 3G to use as an ipod touch but it's not picking up wifi. ive tried everything to like resetting the network settings turning wi fi off and on mutable times, turned the phone off on and on. What do i do?

My dad gave me an iPhone 3G to use as an ipod touch but it's not picking up wifi. ive tried everything to like reseting the network settings turning wi fi off and on mutable times, turned the phone off on and on. What do i do?
the iphone never really picked up wi fi when it was used as a phone and it didnt really matter because he had unlimited internet but it still wont go on wi fi. does any one know why it is doing this?
The iphone works fine other wise i just really want it to go on wi fi. We just got new wi fi too and all of our other apple products go on the wi fi just fine. I dont know if its because its newer or what but my brothers 1st gen ipod goes on wi fi just fine.
The iphone is updated to the latest ios too
WHAT SHOULD I DO!!!!!!!!!!!???????

This might help
http://support.apple.com/kb/ht3406

HT4356 I have an older HP connected to the usb port of my Time Machine, and have it shared. I want to print from my iPhone on the network, but it can not be found in airport? How do I make this work?

I have an older HP connected to the usb port of my Time Machine, and have it shared. I want to print from my iPhone on the network, but it can not be found in airport? How do I make this work?

AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
Read through this for information about Airprint printers and how to use them:
http://support.apple.com/kb/ht4356

Canon pixma mg5420 "printer not responding". I printed the "network configuration page" . 70% strng

I printed the "network configuration page". strength at 70%. how can I fix this?
thanks,

Hi Heltonc,
So that the Community can help you better, we will need to know what Computer Operating System you're using. (Windows XP/Vista/7/8 or Mac 10.x)
Any other details you'd like to give will only help the Community better understand your issue!
If this is an urgent support need, please CLICK HERE to reach our friendly Technical Support Team by phone or email.
Thanks and have a great day!

Label from word and excel won't print; everything else prints

my mg8220 printer all of a sudden won't print labels from word, it also won't print an excel spreadsheet, it used to do both! what has changed? it does print other files

Hi tking69!
Welcome to the Canon Forums and thank you for your post!
So that the Community can help you better, we will need to know if you're seeing any error messages and we also need to know which Computer Operating System you're using (Windows XP/Vista/7/8 or Mac 10.x). It's also helpful to know the way you connect to your printer (USB or networked via WiFi or Ethernet).
Any other details you'd like to give will only help the Community better understand your issue!
If this is an urgent support need, please CLICK HERE to reach our friendly Technical Support Team by phone during normal business hours, or email anytime.
Thanks and have a great day!

I can't print with iPhoto correctly because the reglages can't be changed

My printer is Epson Stylus phot RX620. I am desapointed because the relages of the printer can't be changed. I can't type the paper and the results of the print is not correct. I called Apple but they have no answer. I called Epson and they said all the drivers are correct. If I print something with safari or with mail, I have not problem, I can decide which paper I decide to use to print. Thank you if you have a solution.

What is "relages"?
This is one of the print setting windows Larry is referring to:
It was the first window after iPhoto's print window. It's for an Epson R280 so shouldn't be too different from that for your printer.
OT

HP Photosmart c410 won't print magenta after I cleaned the printhead

I recently tried printing a document but the black came out faded, even though I had a lot of black ink left. This has happened before so I figured I needed to clean out the printhead to clear up any gunk stuck inside. I rinsed the printhead out and let it air-dry overnight. The next morning, I put it back in and inserted all the ink cartridges, which I also left out overnight (not sure if that was a bad idea, since I've done it before). The printer came up with an error message, warning me that magenta won't work or something along those lines and said to change the cartridge or to click OK to continue. I clicked OK, because I had quite a bit of magenta left so I didn't want to just change it; I've never seen that message before. Magenta hasn't worked since then. I've tried re-aligning the cartridges, I've tried clicking clean printhead. When I Print Quality report, it shows black, cyan and yellow (yellow is kind of streaked though). I changed the magenta ink cartridge to see if that might help afterall and it's simply not working! Please help me out! I think I fudged my printer

Hi tracyhuynh,
Welcome to the HP Forums.
I see that you are having an issue with the Magenta not printing. I also see that you stated that the black in was faded as well.
Here is a document that deals with Fixing Print Quality Problems for the HP Photosmart Premium Fax All-in-One Printer Series (C410a, C4....
I am also going to give you a document that deals with when the Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Officejet 6500 All-in-On....
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

MacBook won't print PDF files, it states The process "pstopdffilter" stopped unexpectedly with status 1

Question: MacBooK won't print PDF files, after selecting print it states; The process "pstopdffilter" stopped unexpectedly with status 1. I am currently using a HP Deskjet 4400 series printer and it works fine with all our other lap top computers. Thanks for any help.

The pictwpstops filter on OS X machines, converts the job to straight Postscript before the normal CUPS filters get it.
If the Adobe APPs have a choice of what kind of PS to send, like Binary or ASCII, try toggling that setting to the opposite of what it is.
Though, if a reboot fixed it then likely the problem was a remporary bit flip, which may or may not happen again.

How do I get my HP Officejet Pro 8500 won't print from a program called "The Print Shop 12"?

I can not get my printer to print from this one program I have called "The Print Shop 12." I don't get an error message, it acts like it want to print but then nothing.

I do not know about the Print Shop program but I know that sometimes quickbooks has this issue. We have two different work around for this, 1st one Click your start button go to your printer & devices folder and right click the 8500 printer and either RENAME it or go to Properties to Rename is to OJ8500 and then Apply and safe that change and try it.
2nd step if that does not work, click start, go back to the printers and faxes and "add a printer" when you get to the list of manufactures click HP or Hewlett-Packard and look for the deskjet ICC printer and add it, naming it PrintShop and then you should be able to printer threw that program.
Although I am an HP employee, I am speaking for myself and not for HP.

MacBook Pro won't print in color to Canon ImageRunner network printer

I have a MacBook Pro that I have installed drivers for and I am able to print to the Canon ImageRunner Color 5185i printer in our office. However, I cannot seem to get it to print in color. I have downloaded and installed the latest drivers from Canon but to no avail. Anybody have any ideas out there? This is a network printer with it's own static IP on the network. So frustrated...

I was having a similar problem with an HP printer. When I checked to see which driver my laptop was actually using (System Prefs>Print and Fax>Options and Supplies>Driver), it was using some sort of generic driver that worked fine for black and white, but wasn't getting color. I chose the HP driver out of the set listed and can now print in color. I know you said that you installed the latest drivers and you have probably already checked to see if those drivers are actually the ones being used by your computer, but if not, that might be a solution.
Good luck.

Can't stay connected to my printer when I re-enter the network

We have had many issues with the HP printers over the years, but in fairness they work very well when everything is working.
We have 2 computers in our house, both had issues reconnecting to the printers when the network went down etc... But I have fiddled around, and changed the IP address to a static IP, and now one of the computers works beautifully! It always connects, no problems printing, and it can open the printer's page when it's ip address is typed in.
However the other computer, which is the same spec and has the same HP programs, cannot detect any printer on the network! I typed in the new static IP in this computer and it couldn't detect anthing, whereas the first computer is fine!
I turned the firewall off to check if it was the problem, but unfortunately still nothing can be detected.
I am an amateur, so Im sure I must be missing something obvious!
Please help!
Alex
EDIT: Ok I have been spending countless hours again looking into what could be the issue, I have found that on the working computer the printer is connected via WSD port while on the non-working computer the printer was trying to connect through TCP/IP ports... Is this significant? If so, how to I change port type on the non working computer?
Thanks
Alex

Hello Alex, and welcome to the HP Forums!
I see you are experiencing connectivity issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find your product number. Also, please include which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information and the product number we can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Print spooler crashes whenever I try to print to Deskjet F4280 over the network.

Greetings,
I have a nice and cheap F4280 connected to my computer via USB. My computer is running Windows XP SP3 (downgraded from Vista, had the same problem with Vista as well). I can print fine from my printer, but whenever I try to print from a laptop over the wireless network, the print spooler on my computer crashes and the F4280 doesn't do anything.
I downloaded a Microsoft tool to restart the print spooler, but when I resend the document to the printer over the netword, the spooler drashes again.
I've downloaded all the latest drivers, and attempted to run the critical patch, but an error message said I was already up to date and didn't need to install it.
Does anyone have any ideas?

Resolution/Fix:
You first need to clear out your print queue to prevent the print spooler from crashing again.
On the computer designated as the server do the following:
Stop the printer spool service by right clicking on your My Computer icon and selecting "Manage"
Expand "Services and Applications" and the click on services
Browse through the list of services and find "Printer Spooler".
Right click on the "Print Spooler" service and select "Stop" if Stop is grayed out or disabled and "Start" is an available option, then the service is already stopped.
Go to the c:\Windows\System32\Spool\Printers folder
You should see some files in this directory with a .SHD file extension or a .SPL extension you will want to delete these. In some cases you may see other files in this directory as well, and in general it is safe to delete them. Files besides the .SHD and .SPL should be backed up before you delete them to be safe.
You may either reboot the computer or Start the "Print Spooler" service manually.
Once your print spool is clear you can now proceed with the following on the server computer:
Click on Start then control panel, and then Printer and Faxes
Right click on the HP Deskjet F4280 printer and select Properties
Click on the Advanced tab
Uncheck "Enable advanced printing features"
Click the OK button
You should now be able to print fine from any computer on the network

Outlook 2013 won't start with Exchange 2003 on the network

Hello All,
I have outlined my problem below, If someone could please help me that would be great!
Environment
==========
SBS 2003 Server Running AD and Exchange 2003
Clients are Windows 7 with Office 2013 and Outlook 2007 (to connect to existing 2003 Server)
Issue
=====
I am in the process of Migrating off of SBS 2003 to Office 365. The situation is that my customer needs to keep the SBS 2003 server until end of life where they will at that time determine a upgrade path. They however do not want to use Exchange
anymore. I have migrated their mailboxes successfully to Office 365.
The problem that I am running into is with Outlook 2013. Because Exchange 2003 server still exists in the network I am unable to launch Outlook 2013. I get a Message
"The Resource that you are trying to use is located on an unsupported version of Microsoft Exchange Contact your e-mail administrator for assistance"
I have tried to create a new Outlook profile. However since the exchange server exists still it auto discovers the server for the account.
Questions
========
1. What is the best workaround for this situation? My customer still needs to keep their SBS sever for their domain and plans on retiring the server before Server 2003 End of Life this coming server. (Upgrade is not an option, nor is getting
rid of the Domain, they are a small company).
2. If I disabled the Exchange services on the server would this work? Would outlook 2013 not detect Exchange
2003 on the network?
Basically I need to force Outlook 2013 to look at Office 365.
3. Configuring Outlook 2013 to manually connect to Office 365? The problem here is that how do I locate the server name for the manually connection? I have found some blogs that say to use Remote Connectivity Analyzer https://testconnectivity.microsoft.com/
but I cant seem to get that to work.
Any ideas?
Thanks!

Hi,
Please refer to the following article to check your migration steps from Exchange 2003 to Office 365:
http://blogs.technet.com/b/canitpro/archive/2013/05/31/step-by-step-migration-of-exchange-2003-server-to-office-365.aspx
If all mailboxes are moved to Office 365, Outlook 2013 would use Autodiscover service to connect to your Office 365. Please make sure your Autodiscover service is configured correctly in Office 365. Also
verify that all the DNS records and Public Folder are updated and pointed towards Office 365 services. If there is any question about migration to Office 365,
we can ask a question in Exchange Online forum for more suggestion:
https://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
Regards,
Winnie Liang
TechNet Community Support

Envy114c won\'t print, everything is correct per the network configuration sheet

Similar Messages

Maybe you are looking for