Problems with LinkSys advisor software

I got a new Wireless-G Broadband Router and installed the software. It downloaded the LELA advisor program and about 4 days later, an update apparently came out. It slowed my computer down to the point that I couldn't use it--if you can imagine 5 to 7 minutes to respond to a command! For short periods of time, it would operate normally and then go back to the unbelievably slow, poor performance. I had to bring it in for repair because I couldn't even get to the add/ delete programs to get it out of my computer. They were able to work on it and remove that horrible program. The router works fine and I have no complaints with it, but I would sure caution you buying into that automatic update system! If your router is working fine, why would you want to change it with an update?

I will suggest you to uninstall the LELA program ... if it is slowing down the computer to work ....
Let me know who is your Internet Service provider ... so that i can tell you few manual steps to install the router ...

Similar Messages

HT1222 I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.." HELP! Not sure what my settings shoud be..

I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.." HELP! Not sure what my settings shoud be...
I never updated anything until now...I want o update my iPhone to the newest version, but i do not want ot loose all that I have on this phone. I was told I needed to update the operating systems so i can put things into the cloud for transport to new phone, but I am just not sure how to do this..Can you help out here??

Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

Error 1402 | Error 1406 | Acrobat, Reader

Problem with download Adobe software

I received Error 1935.Policy 8.0.microsoft.VC80 CRT version=8.0.50727.163 "type=win32-policy pulic key token=1fc8b9a1e18e3b."processor architecture=x86". Can I get assistance or guidance in downloading the current software for Adobe.

I was able to download Adobe Reader 10. It seems to solve the problem. I
am not sure if there is an updated version of this program.
2011/10/18 Claudio González <[email protected]>
Re: Problem with download Adobe software created by Claudio González<http://forums.adobe.com/people/Claudio+Gonz%C3%A1lez>in
Adobe Reader - View the full discussion<http://forums.adobe.com/message/3978843#3978843>

Why has Apple not addressed the problems with its own software?

Since I seem to have made the fatal mistake of upgrading my lovely iMac to Snow Leopard, most of my iLife 09 products have ceased working. In particular iDVD, where as before on faithful Leopard it did its job 100% it now decides to crash whenever it feels like it, leaving me with a third party application to use. Myself, along with approx 2000 other users have the same problem, so come on Apple, why the problems with your own software?? and why are we still waiting??

Hi hipster36
Welcome to apple discussions. Question for you: Is your mac intel based?
If not, what's the objective in upgrading to Snow Leopard as opposed to continuing to work perfectly within Leopard? What added features were you considering to upgrade to? Are there any benefits in doing this for your own mac (even if it is intel based)?
It's wise to approach all upgrades with caution (meaning always back up your current / working HD).
Frankly, the way I upgrade is to clone my existing hard drive and then boot to the clone. Thereafter, I install the latest upgrade or OS (assuming it works well on the clone). I guess what I'm saying is to never upgrade without backing up and performing a test drive of the latest OS before you opt to alter your main hard drive. One can't assume that the latest and greatest Mac OS will continue to work fine on a mac which didn't first ship with this particular OS.
This latest Mac OS /Snow Leopard is a bold step forward for apple. It's bold step forward in that it excludes all non-intel based macs.
Message was edited by: SDMacuser

Upgrading from OSX 10.58 to 10.6 - any problems with previously installed software anyone?

I was wondering if anyone had had any problems with their current software after installing 10.6? (I'm asking because I have a substantial investment in the Adobe Creative Suites and don't want to lose it.) Has anyone had any problems after installing 10.6? Thank you in advance for any replies.

I would check the Adobe web site to see if it will be compatible. If there is an issue you may consider a partitioned HDD and run the two OSs each on separate partitions.
Ciao.

LogMeIN Guardian has detected a problem with the LogMeIn software...

A customer I support got an error dialog box, "LogMeIN Guardian has detected a problem with the LogMeIn software on this machine". He supplied no other details regarding what he was doing at the time or how long the session had been established with the host. I connected to his laptop and there are no malware infections reported by HitMan Pro or Norton. The event viewer entry for this event is: LogMeIn Guardian has detected a problem with the LogMeIn software installed on this machine. The problem is locally identified by the following reference ID: 'e564efd936b4fa136c2f2fc87cfcc592'. There are no other remarkable events in the event viewer. Any idea what happened? Does the reference ID help? Thanks,

I am receiving a similar message. The id is different and I don't know if that is a generic message and the ID is the key or if the id just relates to computer-account or something. In my case, I have installed it onto Windows 8 RP and although everything looks fine, and most functions work correctly but when I try to remote-control I get a 202 (remote control session initiated) and see a flash of the desktop then a disconnect with error 104 and the following: Message: LogMeIn Guardian has detected a problem with the LogMeIn software installed on this machine. The problem is locally identified by the following reference ID: '386708ab41884ad6d1d37258cd9b6140' my guess is an incompatible display driver since I can do other functions (such as event viewer). I will be trying a newer driver.

Is anyone else having problems with the new software update for macbook? I get random clicking and flicker an movement of the pointer!

Is anyone else having problems with the new software update for macbook? I get random clicking and flicker an movement of the pointer!

OS X 10.7 Lion, 10.8 Mountain Lion & 10.9 Mavericks
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

Ios7, ios8 wifi problem with Linksys WAP54G

I have 4 apple wireless devices (iPad mini, iPad 2, iPhone 4, iPhone5) in my house.     I have about 8 other wireless devices (non-apple).   I have a Linksys WAP54G wireless access point (on the latest software 3.08.06).
Everything worked just dandy until I upgraded to iOS7.   At that point, all apple wireless devices did the same thing: After a random amount of idle time, picking them back up again, they'd be disconnected from the network.   They all claimed they were connected to the wireless network, had an actual valid IP address from the WAP, but would not access the network.   Just spins.    Only solution is to deactivate wireless on the device, and re-activate.   Now works fine until the next random time it drops it again.
I figured this would be fixed in iOS8. No luck.
All other devices of different types (windows 8 lenovo laptops, Roku boxes, Tivo boxes, Nest thermostat, etc...) ALL have always connected just fine to the wireless network, and the Apple devices USED TO until iOS7.
Clearly they broke something in iOS7, and it is still broken in iOS8.
I realize this is an old WAP, but come on.
anyone else have this issue?    Apple, what did you break and why can't you fix it?
thanks
tom

I am in the UK and have one of the fastest fibre optic broadband on the market but have the same issue with my iPad air since downloading ios8. I can no longer watch Netflix and pages close, or just go incredibly slow. Apple are you going to get this fixed. My iPad drops outs of my broadband connection and buffers constantly yet I have no problem with other devices.
thanks
SImone

Problem with linksys repeater

I am using a linksysWR54 G wireless router. I recently purchased a linksys repeater to extend a signal throughout my house. I cannot get the repeater to work. I press the reset button and then the button for automatic configuration. But it does not seem to recognize the wireless router. However when I take it to my neighbor's house, who has a similar model wireless router, and push reset, then automatic configuration at his house it functions perfectly. Is this a software problem? I hate to sound stupid, but because I using a Macintosh, I'm not even sure how to download the latest software or what is available. Currently I am using
version 3.03.6 thanks

Although I am having a similiar problem with the wre54g extender and mac laptops I can tell you that the easiest way to configure the extender if it is a Version 2 wre54g is to run an ethernet cable from the router to to the port on the front of the extender (small tab can be lifted). After that open your browser and type 192.168.1.240 and enter, user name is blank and password is admin. From there configure it exactly as your router is configured. It could be that your router is encrypted etc...
If it is a version 1 you will have to reset the extender (paperclip for 15 seconds on side) then plug into a socket and look for it on the list of available networks (linksys r.....). connect to it using a static IP of 192.168.1.5 and a gateway of 255.255.255.0 - check with linksys to verify. Once connected open safari and type 192.168.1.240 and follow above.
Make sure to change the ip address to something like 241 or maybe a static within the range of the routers addressing scheme. I think this is the problem I am having... The mac is not picking up the extenders ip. I am waiting to hear back from tech support to verify.
Hope this helps
SiO2y

Problem with Java after Software Update to 10.5.7

Hi,
I am facing problem with Java after having run Software upgrades.
Here is the whole story. I recently moved to iMac 10.5.6 from PowerPc 10.4. On this new machine I was having problem running a 3rd party application, which requires JVM. As this application worked well on Tiger, I decided to upgrade JVM on my iMAC using Software Upgrade(was I insane!!). As I like my systems to be updated (as with linux on my personal machine) I clicked "install all". As a result I have the following upgrades run on my machine:
2009-05-20 13:12:01 +0200: Installed "Mac OS X Update Combined" (10.5.7)
2009-05-20 13:12:10 +0200: Installed "Remote Desktop Client Update" (3.2.2)
2009-05-20 13:12:26 +0200: Installed "Java For Mac OS X 10.5 Update 2" (1.0)
2009-05-20 13:58:36 +0200: Installed "Java for Mac OS X 10.5 Update 3" (1.0)
2009-05-20 13:58:44 +0200: Installed "AirPort Utility Software Update 2009-001" (5.4.1)
2009-05-20 13:59:07 +0200: Installed "QuickTime" (7.6)
2009-05-20 13:59:22 +0200: Installed "iPhoto Update" (7.1.5)
2009-05-20 13:59:28 +0200: Installed "iLife Support" (9.0.2)
2009-05-20 13:59:38 +0200: Installed "iDVD Update" (7.0.3)
2009-05-20 13:59:58 +0200: Installed "iTunes" (8.1.1)
But now, simply running $java on the prompt hangs, i.e. it takes no action.
$ which java
/usr/bin/java
$ ls -ltr /usr/bin/java
May 20 15:09 /usr/bin/java -> /System/Library/Frameworks/JavaVM.framework/Versions/Current/Commands/java
$java (no response)
Here is the output of $ top
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
703 java 98.8% 0:38.54 3 110 72 480K 184K 1964K 40M
Any clues?
Details of JavaVM on my machine
$ pwd
/System/Library/Frameworks/JavaVM.framework/Versions
$ ls -ltr
total 56
drwxr-xr-x 3 root wheel 102 Dec 2 2007 1.3.1
lrwxr-xr-x 1 root wheel 3 Aug 31 2008 1.4.1 -> 1.4
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.4.2
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.5.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.3 -> 1.3.1
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.4 -> 1.4.2
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.5 -> 1.5.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 1.6.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.6 -> 1.6.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 A
lrwxr-xr-x 1 root wheel 1 May 20 14:57 Current -> A
lrwxr-xr-x 1 root wheel 3 May 20 14:59 CurrentJDK -> 1.5
Any suggestions? Is there a cleaner approach to uninstall Java on Mac then a simpl "move to thrash"!
cheers

Hi,
I am facing problem with Java after having run Software upgrades.
Here is the whole story. I recently moved to iMac 10.5.6 from PowerPc 10.4. On this new machine I was having problem running a 3rd party application, which requires JVM. As this application worked well on Tiger, I decided to upgrade JVM on my iMAC using Software Upgrade(was I insane!!). As I like my systems to be updated (as with linux on my personal machine) I clicked "install all". As a result I have the following upgrades run on my machine:
2009-05-20 13:12:01 +0200: Installed "Mac OS X Update Combined" (10.5.7)
2009-05-20 13:12:10 +0200: Installed "Remote Desktop Client Update" (3.2.2)
2009-05-20 13:12:26 +0200: Installed "Java For Mac OS X 10.5 Update 2" (1.0)
2009-05-20 13:58:36 +0200: Installed "Java for Mac OS X 10.5 Update 3" (1.0)
2009-05-20 13:58:44 +0200: Installed "AirPort Utility Software Update 2009-001" (5.4.1)
2009-05-20 13:59:07 +0200: Installed "QuickTime" (7.6)
2009-05-20 13:59:22 +0200: Installed "iPhoto Update" (7.1.5)
2009-05-20 13:59:28 +0200: Installed "iLife Support" (9.0.2)
2009-05-20 13:59:38 +0200: Installed "iDVD Update" (7.0.3)
2009-05-20 13:59:58 +0200: Installed "iTunes" (8.1.1)
But now, simply running $java on the prompt hangs, i.e. it takes no action.
$ which java
/usr/bin/java
$ ls -ltr /usr/bin/java
May 20 15:09 /usr/bin/java -> /System/Library/Frameworks/JavaVM.framework/Versions/Current/Commands/java
$java (no response)
Here is the output of $ top
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
703 java 98.8% 0:38.54 3 110 72 480K 184K 1964K 40M
Any clues?
Details of JavaVM on my machine
$ pwd
/System/Library/Frameworks/JavaVM.framework/Versions
$ ls -ltr
total 56
drwxr-xr-x 3 root wheel 102 Dec 2 2007 1.3.1
lrwxr-xr-x 1 root wheel 3 Aug 31 2008 1.4.1 -> 1.4
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.4.2
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.5.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.3 -> 1.3.1
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.4 -> 1.4.2
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.5 -> 1.5.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 1.6.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.6 -> 1.6.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 A
lrwxr-xr-x 1 root wheel 1 May 20 14:57 Current -> A
lrwxr-xr-x 1 root wheel 3 May 20 14:59 CurrentJDK -> 1.5
Any suggestions? Is there a cleaner approach to uninstall Java on Mac then a simpl "move to thrash"!
cheers

Sync problem with Blackberry Desktop Software for Mac

Can someone help. I have synchronization problem with my contact in the Outlook for Mac using blackberry desktop software for mac. Seems all details in my blackberry handheld contact got synchronized, but not email addresses (so all names, jobs, companies, work phone, mobile - all got synchronized, but not email addresses). All data is in my handheld. I wish I could just "replace" (not merge/sync) outlook contact with all contact in the handheld but seems there is no option to do that. Let me know please if someone has similar experience and has found out solution. Thanks!

Can someone help. I have synchronization problem with my contact in the Outlook for Mac using blackberry desktop software for mac. Seems all details in my blackberry handheld contact got synchronized, but not email addresses (so all names, jobs, companies, work phone, mobile - all got synchronized, but not email addresses). All data is in my handheld. I wish I could just "replace" (not merge/sync) outlook contact with all contact in the handheld but seems there is no option to do that. Let me know please if someone has similar experience and has found out solution. Thanks!

Problem with linksys EA2700

I've got a problem with my linksys ea2700. one time my network components get an ip-address like 192.168.x.x, the other time they get an ipaddres 10.184.x..x, I want that all my components will get the 10.184.x.x address, how can I solve this problem?

If your modem has a capability to be a DHCP server then just configure your EA2700 router as bridged. In that way, the EA2700 router will just act as a pass through device.
Setting up your Linksys Wi-Fi or Smart Wi-Fi Router to Bridge Mode

Has anyone had any problem with Linksys?

I haven been trying to connect to my Linksys with speedbooster and I can't figure it out. My entire life I have never used an apple computer.
I have called the Linksys support people and they tell me the same thing: "We don't provide support for apple computers." That's great hugh?!!
I am able to connect to the router without a WAP or WEP password but I don't want to leave a free signal around my area.
This routers come with different WAP codes, also with Radial and WEP that is hard to know which one is the right one.
Do you guys have any idea how I could be able to solve this problem? Has any of you guys have encounter something like this with Linksys?

If your Mac is truly running MacOS 10.2.x, you are limited to using 128-bit WEP security - WPA is not supported.
On the Linksys router, select 128-bit WEP and enter a passphrase. The router will generate, from the passphrase, four hexadecimal-format WEP keys. Copy down the FIRST of those four WEP keys - and use that WEP key on your Mac when prompted.

Problems with third party software unable to maint...

Hi,
I have a problem with a software application that needs to be connected to a server on the web all the time. I get disconnects logged in its log file. It's worst in the evening up until about 11pm and then it improves markedly but during the weekdays its connectivity degrades again until the evening.
I have tried many things including taking my PC and connecting up to O2 broadband where these disconnects didn't happen at all. I think that BT is throttling my connection and causing packet loss that this software can't deal with.
I was looking at my BT account on bt.com and I discovered there is a usage meter. Up until now, I thought I had a flatrate deal however the usage meter tells me I've only got 10Gb for December and I've used half of it and it's only the 10th today.
I read in the Help section that if I exceed my limit I will get charged and BT will start restricting my connection. This is what I think is happening.
However the Help section also said I would be informed by email but I haven't received any emails regarding my usage. I have a suspicion that they may be being sent to a BT email address which I was allocated, but I set this account up 6 years ago and I now have no record of what the BT email would be.
How can I find out what my email address is and whether there are a pile of emails waiting for me to read? Am I likely to be right about the software connectivity problem and BT throttling my connection?
Thanks for any help!
Regards
Adam Hardy

Hi Guys,
thanks for your quick responses.
I don't have a record of an email from BT for 2004 when I set up my telephone & broadband. I do have an email saying that my BT.com login name is "[email protected]" (obviously not really) but nothing else.
In my files I have a letter saying the same thing with an account number, but no btinternet.com address.
I logged into MyBT and under the Broadband "Manage your services" there's a username which I am not familiar with and my telephone number.
I tried setting up an email account in Thunderbird to download any emails from mail.btinternet.com using that username but it asks me for a password which I leave blank and then it says "Error logging in. Please visit mail.yahoo.com". I also tried it with [email protected]
I just visited mail.yahoo.com which redirected me to https://register.btinternet.com/cgi-bin/respasswd1 but that form asks me for postcode, DOB and mother's maiden name and then tells me the info is wrong (which it's not - I even tried my old postcodes).
What is strange is that the username given "jsmith123" is not the username I use to log in here - see to the right - I think that must have been adopted by BT at some point later.
Any other advice?
Thanks!

Problems with LinkSys advisor software

Similar Messages

Maybe you are looking for